PRCP-R185-0-99 - COPAL - Datasheet.Live

* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.

Specifications are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Customers should verify actual device performance in their specific applications.

PRCP-R Series - Polymer Resettable Circuit Protectors

RS0815 1

1 Hour (R 1) Max. Time Tripped

Ihold Itrip Initial Post-Trip To Trip Power

Resistance Resistance Dissipation

Model Amperes Ohms Ohms Amperes Seconds Watts

V max. I max.

at 23 C at 23 C at 23 C at 23 C at 23 C at 23 °C

Volts Amps

Hold Trip Min. Max. Max. Typ.

PRCP-R005**

PRCP-R010

PRCP-R017

PRCP-R020

PRCP-R025

PRCP-R030

PRCP-R040

PRCP-R050

PRCP-R065

PRCP-R075

PRCP-R090

PRCP-R090-0-9

PRCP-R110

PRCP-R135

PRCP-R160

PRCP-R185

PRCP-R250

PRCP-R250-0-10

PRCP-R300 30 40 3.00 6.00 0.020 0.05 0.08 15.0 10.8 2.00

PRCP-R400 30 40 4.00 8.00 0.010 0.03 0.05 20.0 12.7 2.50

PRCP-R500 30 40 5.00 10.00 0.010 0.03 0.05 25.0 14.5 3.00

PRCP-R600 30 40 6.00 12.00 0.005 0.02 0.04 30.0 16.0 3.50

PRCP-R700 30 40 7.00 14.00 0.005 0.02 0.03 35.0 17.5 3.80

PRCP-R800 30 40 8.00 16.00 0.005 0.02 0.03 40.0 18.8 4.00

PRCP-R900 30 40 9.00 18.00 0.005 0.01 0.02 45.0 ***20.0 4.20

PRCP-R1100 16 100 11.00 22.00 0.003 0.01 0.014 40.0 20.0 4.50

Electrical Characteristics

Features

Radial Leaded Devices

Cured, flame retardant epoxy polymer

insulating material meets UL 94V-0

requirements

RoHS compliant* and halogen free**

Agency recognition:

Applications

Almost anywhere there is a low voltage

power supply and a load to be protected,

including:

Computers & peripherals

General electronics

Automotive applications

***Tested at 40 amps

Operating/Storage Temperature ........................-40 °C to +85 °C

Maximum Device Surface Temperature

in Tripped State ................................................125 °C

Passive Aging......................................................+85 °C, 1000 hours ....................................±5 % typical resistance change

Humidity Aging ....................................................+85 °C, 85 % R.H. 1000 hours ....................±5 % typical resistance change

Thermal Shock ....................................................-40 °C to +85 °C, 10 times ..........................±10 % typical resistance change

Solvent Resistance ............................................MIL-STD-202, Method 215 ........................No change

Vibration ..............................................................M

IL-STD-883C, Method 2007.1

, ................No change

Condition A

Environmental Characteristics

Test Test Conditions Accept/Reject Criteria

Visual/Mech. ......................................................Verify dimensions and materials..................Per PRCP physical description

Resistance ..........................................................In still air @ 23 °C........................................Rmin ≤ R ≤ R max

Time to Trip ........................................................5 times Ihold, Vmax, 23 °C ..........................T ≤ max. time to trip (seconds)

Hold Current ......................................................30 min. at Ihold ............................................No trip

Trip Cycle Life ....................................................Vmax, Imax,100 cycles ..............................No arcing or burning

Trip Endurance....................................................Vmax, 48 hours ..........................................No arcing or burning

UL File Number ..................................................E300792

TÜV File Number ................................................R 50075506

Test Procedures And Requirements For Model PRCP-R Series

TNAILPMOC SHoR*

60 40 0.05 0.10 7.3 11.1 22.0 0.5 5.0 0.22

60 40 0.10 0.20 2.50 4.50 7.50 0.5 4.0 0.38

60 40 0.17 0.34 2.00 3.20 8.00 0.85 3.0 0.48

60 40 0.20 0.40 1.50 2.84 4.40 1.0 2.2 0.40

60 40 0.25 0.50 1.00 1.95 3.00 1.25 2.5 0.45

60 40 0.30 0.60 0.76 1.36 2.10 1.5 3.0 0.50

60 40 0.40 0.80 0.52 0.86 1.29 2.0 3.8 0.55

60 40 0.50 1.00 0.41 0.77 1.17 2.5 4.0 0.75

60 40 0.65 1.30 0.27 0.48 0.72 3.25 5.3 0.90

60 40 0.75 1.50 0.18 0.40 0.60 3.75 6.3 0.90

60 40 0.90 1.80 0.14 0.31 0.47 4.5 7.2 1.00

30 40 0.90 1.80 0.07 0.12 0.22 4.5 5.9 0.60

30 40 1.10 2.20 0.10 0.18 0.27 5.5 6.6 0.70

30 40 1.35 2.70 0.065 0.115 0.17 6.75 7.3 0.80

30 40 1.60 3.20 0.055 0.105 0.15 8.0 8.0 0.90

30 40 1.85 3.70 0.040 0.07 0.11 9.25 8.7 1.00

30 40 2.50 5.00 0.025 0.048 0.07 12.5 10.3 1.20

CCC

** UL and TÜV

COPAL follows the prevailing definition of “halogen free” in the industy. COPAL considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less;

(b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.

PRCP-R Rev.I

Specifications are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Customers should verify actual device performance in their specific applications.

A B C D E Physical Characteristics

Model Max. Max. Nom. Tol. ± Min. Max. Style Lead Dia. Material

PRCP-R005 8.0 8.3 5.1 0.7 7.6 3.1 40.405 Sn/NiCu

(0.315) (0.327) (0.201) (0.028) (0.299) (0.122) (0.016)

PRCP-R010 7.4 12.7 5.1 0.7 7.6 3.1 10.51 Sn/NiCu

(0.291) (0.5) (0.201) (0.028) (0.299) (0.122) (0.020)

PRCP-R017 7.4 12.7 5.1 0.7 7.6 3.1 10.51 Sn/CuFe

(0.291) (0.5) (0.201) (0.028) (0.299) (0.122) (0.020)

PRCP-R020 7.4 12.7 5.1 0.7 7.6 3.1 10.51 Sn/CuFe

(0.291) (0.5) (0.201) (0.028) (0.299) (0.122) (0.020)

PRCP-R025 7.4 12.7 5.1 0.7 7.6 3.1 10.51 Sn/CuFe

(0.291) (0.5) (0.201) (0.028) (0.299) (0.122) (0.020)

PRCP-R030 7.4 13.4 5.1 0.7 7.6 3.1 10.51 Sn/CuFe

(0.291) (0.528) (0.201) (0.028) (0.299) (0.122) (0.020)

PRCP-R040 7.4 13.7 5.1 0.7 7.6 3.1 10.51 Sn/CuFe

(0.291) (0.539) (0.201) (0.028) (0.299) (0.122) (0.020)

PRCP-R050 7.9 13.7 5.1 0.7 7.6 3.1 10.51 Sn/Cu

(0.311) (0.539) (0.201) (0.028) (0.299) (0.122) (0.020)

PRCP-R065 9.7 15.2 5.1 0.7 7.6 3.1 10.51 Sn/Cu

(0.382) (0.598) (0.201) (0.028) (0.299) (0.122) (0.020)

PRCP-R075 10.4 16.0 5.1 0.7 7.6 3.1 10.51 Sn/Cu

(0.409) (0.630) (0.201) (0.028) (0.299) (0.122) (0.020)

PRCP-R090 11.7 16.7 5.1 0.7 7.6 3.1 10.51 Sn/Cu

(0.461) (0.657) (0.201) (0.028) (0.299) (0.122) (0.020)

PRCP-R090-0-9 7.4 12.2 5.1 0.7 7.6 3.0 30.51 Sn/CuFe

(0.291) (0.480) (0.201) (0.028) (0.299) (0.118) (0.020)

PRCP-R110 8.9 14.0 5.1 0.7 7.6 3.0 10.51 Sn/Cu

(0.350) (0.551) (0.201) (0.028) (0.299) (0.118) (0.020)

PRCP-R135 8.9 18.9 5.1 0.7 7.6 3.0 10.51 Sn/Cu

(0.350) (0.744) (0.201) (0.028) (0.299) (0.118) (0.020)

PRCP-R160 10.2 16.8 5.1 0.7 7.6 3.0 10.51 Sn/Cu

(0.402) (0.661) (0.201) (0.028) (0.299) (0.118) (0.020)

PRCP-R185 12.0 18.4 5.1 0.7 7.6 3.0 10.51 Sn/Cu

(0.472) (0.724) (0.201) (0.028) (0.299) (0.118) (0.020)

PRCP-R250 12.0 18.3 5.1 0.7 7.6 3.0 20.81 Sn/Cu

(0.472) (0.720) (0.201) (0.028) (0.299) (0.118) (0.032)

PRCP-R250-0-10 12.0 18.3 5.1 0.7 7.6 3.0 30.51 Sn/CuFe

(0.472) (0.720) (0.201) (0.028) (0.299) (0.118) (0.020)

PRCP-R300 12.0 18.3 5.1 0.7 7.6 3.0 20.81 Sn/Cu

(0.472) (0.720) (0.201) (0.028) (0.299) (0.118) (0.032)

PRCP-R400 14.4 24.8 5.1 0.7 7.6 3.0 20.81 Sn/Cu

(0.567) (0.976) (0.201) (0.028) (0.299) (0.118) (0.032)

PRCP-R500 17.4 24.9 10.2 0.7 7.6 3.0 20.81 Sn/Cu

(0.685) (0.980) (0.402) (0.028) (0.299) (0.118) (0.032)

PRCP-R600 19.3 31.9 10.2 0.7 7.6 3.0 20.81 Sn/Cu

(0.760) (1.256) (0.402) (0.028) (0.299) (0.118) (0.032)

PRCP-R700 22.1 29.8 10.2 0.7 7.6 3.0 20.81 Sn/Cu

(0.870) (1.173) (0.402) (0.028) (0.299) (0.118) (0.032)

PRCP-R800 24.2 32.9 10.2 0.7 7.6 3.0 20.81 Sn/Cu

(0.953) (1.295) (0.402) (0.028) (0.299) (0.118) (0.032)

PRCP-R900 24.2 32.9 10.2 0.7 7.6 3.0 20.81 Sn/Cu

(0.953) (1.295) (0.402) (0.028) (0.299) (0.118) (0.032)

PRCP-R1100 24.2 32.9 10.2 0.7 7.6 3.0 20.81 Sn/Cu

(0.953) (1.295) (0.402) (0.028) (0.299) (0.118) (0.032)

Product Dimensions (see next page for outline drawing)

Packaging options: BULK: All models = 500 pcs. per bag.

PRCP-R185-PRCP-R400 - 25.4mm device pitch = 1500 pcs. per reel; PRCP-R250-0-10 = 1500 pcs. per reel.

0.405 (26AWG)

0.51 (24AWG)

0.81 (20AWG)

PRCP-R Series - Polymer Resettable Circuit Protectors

Additional Features

Bulk packaging, tape and reel available on most models

(INCHES)

DIMENSIONS =

TAPE & REEL: PRCP-R005-PRCP-R160 - 12.7 mm device pitch = 3000 pcs. per reel;

Specifications are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Customers should verify actual device performance in their specific applications.

Thermal Derating Chart - Ihold / Itrip (Amps)

Ambient Operating Temperature

Model

-40 ˚C -20 ˚C 0 ˚C 23 ˚C 40 ˚C 50 ˚C 60 ˚C 70 ˚C 85 ˚C

PRCP-R005 0.08 / 0.16 0.06 / 0.12 0.05 / 0.10 0.04 / 0.08 0.04 / 0.08 0.03 / 0.07 0.03 / 0.07 0.02 / 0.05

PRCP-R010 0.16 / 0.32 0.14 / 0.28 0.12 / 0.24 0.10 / 0.20 0.08 / 0.16 0.07 / 0.14 0.06 / 0.12 0.05 / 0.10 0.04 / 0.08

PRCP-R017 0.26 / 0.52 0.23 / 0.46 0.20 / 0.40 0.17 / 0.34 0.14 / 0.28 0.12 / 0.24 0.11 / 0.22 0.09 / 0.18 0.07 / 0.14

PRCP-R020 0.31 / 0.62 0.27 / 0.54 0.24 / 0.48 0.20 / 0.40 0.16 / 0.32 0.14 / 0.28 0.13 / 0.26 0.11 / 0.22 0.08 / 0.16

PRCP-R025 0.39 / 0.78 0.34 / 0.68 0.30 / 0.60 0.25 / 0.50 0.20 / 0.40 0.18 / 0.36 0.16 / 0.32 0.14 / 0.28 0.10 / 0.20

PRCP-R030 0.47 / 0.94 0.41 / 0.82 0.36 / 0.72 0.30 / 0.60 0.24 / 0.48 0.22 / 0.44 0.19 / 0.38 0.16 / 0.32 0.12 / 0.24

PRCP-R040 0.62 / 1.24 0.54 / 1.08 0.48 / 0.96 0.40 / 0.80 0.32 / 0.64 0.29 / 0.58 0.25 / 0.50 0.22 / 0.44 0.16 / 0.32

PRCP-R050 0.78 / 1.56 0.68 / 1.36 0.60 / 1.20 0.50 / 1.00 0.41 / 0.82 0.36 / 0.72 0.32 / 0.64 0.27 / 0.54 0.20 / 0.40

PRCP-R065 1.01 / 2.02 0.88 / 1.76 0.77 / 1.54 0.65 / 1.30 0.53 / 1.06 0.47 / 0.94 0.41 / 0.82 0.35 / 0.70 0.26 / 0.52

PRCP-R075 1.16 / 2.32 1.02 / 2.04 0.89 / 1.78 0.75 / 1.50 0.61 / 1.22 0.54 / 1.08 0.47 / 0.94 0.41 / 0.82 0.30 / 0.60

PRCP-R090 1.40 / 2.80 1.22 / 2.44 1.07 / 2.14 0.90 / 1.80 0.73 / 1.46 0.65 / 1.30 0.57 / 1.14 0.49 / 0.98 0.36 / 0.72

PRCP-R090-0-9 1.40 / 2.80 1.22 / 2.44 1.07 / 2.14 0.90 / 1.80 0.73 / 1.46 0.65 / 1.30 0.57 / 1.14 0.49 / 0.98 0.36 / 0.72

PRCP-R110 1.60 / 3.20 1.43 / 2.86 1.27 / 2.54 1.10 / 2.20 0.91 / 1.82 0.85 / 1.70 0.75 / 1.50 0.67 / 1.34 0.57 / 1.14

PRCP-R135 1.96 / 3.92 1.76 / 3.52 1.55 / 3.10 1.35 / 2.70 1.12 / 2.24 1.04 / 2.08 0.92 / 1.84 0.82 / 1.64 0.70 / 1.40

PRCP-R160 2.32 / 4.64 2.08 / 4.16 1.84 / 3.68 1.60 / 3.20 1.33 / 2.66 1.23 / 2.46 1.09 / 2.18 0.98 / 1.96 0.83 / 1.66

PRCP-R185 2.68 / 5.36 2.41 / 4.82 2.13 / 4.26 1.85 / 3.70 1.54 / 3.08 1.42 / 2.84 1.26 / 2.52 1.13 / 2.26 0.96 / 1.92

PRCP-R250 3.63 / 7.26 3.25 / 6.50 2.88 / 5.76 2.50 / 5.00 2.08 / 4.16 1.93 / 3.86 1.70 / 3.40

1.53 / 3.06

1.30 / 2.60

PRCP-R250-0-10 3.63 / 7.26 3.25 / 6.50 2.88 / 5.76 2.50 / 5.00 2.08 / 4.16 1.93 / 3.86 1.70 / 3.40 1.30 / 2.60

PRCP-R300 4.35 / 8.70 3.90 / 7.80 3.45 / 6.90 3.00 / 6.00 2.49 / 4.98 2.31 / 4.62 2.04 / 4.08 1.83 / 3.66 1.56 / 3.12

PRCP-R400 5.80 / 11.6 5.20 / 10.4 4.60 / 9.20 4.00 / 8.00 3.32 / 6.64 3.08 / 6.16 2.72 / 5.44 2.44 / 4.88 2.08 / 4.16

PRCP-R500 7.25 / 14.5 6.50 / 13.0 5.75 / 11.5 5.00 / 10.0 4.15 / 8.30 3.85 / 7.70 3.40 / 6.80 3.05 / 6.10 2.60 / 5.20

PRCP-R600 8.70 / 17.4 7.80 / 15.6 6.90 / 13.8 6.00 / 12.0 4.98 / 9.96 4.62 / 9.24 4.08 / 8.16 3.66 / 7.32 3.12 / 6.24

PRCP-R700 10.1 / 20.3 9.10 / 18.2 8.05 / 16.1 7.00 / 14.0 5.81 / 11.6 5.39 / 10.7 4.76 / 9.52 4.27 / 9.44 3.64 / 7.28

PRCP-R800 11.6 / 23.2 10.4 / 20.8 9.20 / 18.4 8.00 / 16.0 6.64 / 13.2 6.16 / 12.3 5.44 / 10.8 4.88 / 9.76 4.16 / 8.32

PRCP-R900 13.0 / 26.1 11.7 / 23.4 10.3 / 20.7 9.00 / 18.0 7.47 / 14.9 6.93 / 12.7 6.12 / 12.2 5.49 / 10.9 4.68 / 9.36

PRCP-R110 16.1 / 32.0 14.6 / 29.2 13.1 / 26.2 11.0 / 22.1 9.40 / 18.4 8.80 / 17.6 7.80 / 15.6 6.90 / 13.8 5.20 / 10.4

NOTE: Kinked lead option is

available for board standoff.

Contact factory for details.

NOTE: Also available with

straight leads. Contact

factory for details.

Style 1

Style 2

Style 3 Style 4

A E

Product Dimensions (see previous page for dimensions)

PRCP-R Series - Polymer Resettable Circuit Protectors

0.07 / 0.14

1.53 / 3.06

Specifications are subject to change without notice.

The device characteristics and parameters inthis data sheet can and do vary in different applications and actual device performance may vary over time.

Customers should verify actual device performance in their specific applications.

How to Order

PRCP - R 110 - 0 - 99

Product Designator

Series

R = Radial Leaded Component

Hold Current, Ihold

005-1100 (0.05 Amps - 11.0 Amps)

Packaging Options

- 0 = Bulk packaging

- 2 = Tape and Reel

Part Number Suffix Option

- 99 = = Part number suffix option for customers

requiring a new part number to reference the

engineering change to RoHS compliance.

Typical Time to Trip at 23 ˚C

100

0.1

0.01

0.001

0.1 1 10 100

Fault Current (Amps)

)sdnoceS( pirt ot emiT

PRCP-R017

PRCP-R040

PRCP-R075

PRCP-R020

PRCP-R050

PRCP-R065

PRCP-R090

PRCP-R025

PRCP-R030

PRCP-R010

PRCP-R005

PRCP-R Series - Polymer Resettable Circuit Protectors

100

0.1

0.01

0.001

110 100

Fault Current (Amps)

)sdnoceS( pirt ot emiT

PRCP-R110

PRCP-R250,

01-0-052

PRCP-R500

PRCP-R135

PRCP-R300

PRCP-R400

PRCP-R600

PRCP-R700

PRCP-R800

PRCP-R900

PRCP-R1100

PRCP-R160

PRCP-R185

PRCP-R090

9-0-

Typical Part Marking:PRCP-R005-R025

Represents total content. Layout may vary.

R025

PART

IDENTIFICATION

MANUFACTURER'S

MARK

DATE CODE:

WEEK 1 OF 2005 = 5A

(YEAR & WEEK)

WEEK 27 OF 2005 = A5

(WEEK & YEAR)

Typical Part Marking:PRCP-R030-R1100

Represents total content. Layout may vary.

R250

5180S

MANUFACTURER'S

MARK

PART

IDENTIFICATION

DATE CODE

(FIRST DIGIT =

LAST DIGIT OF YEAR;

NEXT THREE DIGITS =

DAY OF YEAR)

LOT NO.

(S = CHINA)

ｃ

Specifications are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Customers should verify actual device performance in their specific applications.

Devices taped using EIA468–B/IEC286-2 standards. See table below and Figures 1 and 2 for details.

IEC EIA Dimensions

Dimension Description Mark Mark Dimensions Tolerance

Carrier tape width W W

Hold down tape width: W0W4min.

Hold down tape No protrusion

Top distance between tape edges W2W6max.

Sprocket hole position W1W5

Sprocket hole diameter D0D0

Abscissa to plane (straight lead) H H

Abscissa to plane (kinked lead) H0H0

Abscissa to top (straight lead) H1H1max.

Abscissa to top (kinked lead) H1H1max.

Overall width w/lead protrusion (straight lead) C1max.

Overall width w/lead protrusion (kinked lead) C1max.

Overall width w/o lead protrusion (straight lead) C2max.

Overall width w/o lead protrusion (kinked lead) C2max.

Lead protrusion I 1L1max.

Protrusion of cutout L L max.

Protrusion beyond hold-down tape I 2I2Not speciﬁed

Sprocket hole pitch P0P0

Pitch tolerance 20 consecutive

Device pitch:

PRCP-R005-PRCP-R160

Device pitch:

PRCP-R185‒PRCP-R400

Tape thickness t t max.

Tape thickness with splice:

PRCP-R010‒PRCP-R160 t1max.

Tape thickness with splice:

PRCP-R250‒PRCP-R1100 t1max.

Splice sprocket hole alignment 0

Body lateral deviation ∆h∆h0

Body tape plane deviation ∆p∆p0

(.709)

-0.5/+1.0

(-0.02/+.039)

(.354)

-0.5/+0.75

(-0.02/+0.03)

(.157)

±0.2

(±.0078)

18.5

(.728)

±3.0

(±.118)

(.63)

32.2

(1.268)

38.0

(1.496)

43.2

(1.7)

55.0

(2.165)

42.5

(1.673)

54.0

(2.126)

1.0

(.039)

(.433)

±0.5

(±.02)

12.7

(0.5)

12.7

(0.5)

25.4

(1.0)

0.9

(.035)

1.5

(.059)

2.3

(.091)

±0.3

(±.012)

±1

(±.039)

±0.3

(±.012)

±0.6

(±.024)

±0.3

(±.012)

±1.0

(±.039)

±1.3

(±.051)

(.433)

(.118)

DIMENSIONS = MM

(INCHES)

PRCP-R Series Tape and Reel Specifications

Specifications are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Customers should verify actual device performance in their specific applications.

User direction of feed

Cross section A - B

Reference plane

H0W1

Reel

Upper side

Tape

Lower side

User

direction

feed

Reel Dimensions - Figure 2

Taped Component Dimensions - Figure 1

DIMENSIONS = MM

(INCHES)

IEC EIA Dimensions

Dimension Description Mark Mark Dimensions Tolerance

Arbor hole diameter

Core diameter h n max.

Box nom.

Consecutive missing places 3 max.

Empty places per reel

Not specified

(1.024)

(3.15)

(2.44)

355

(14.0)

345

(13.6)

±12.0

(±.472)

PRCP-R Series Tape and Reel Specifications

Lead spacing F F

Reel width w

max.

Reel diameter d a max.

Space between ﬂanges less device W1h

5.08

(0.2)

(2.205)

370

(14.57)

±0.2

(±.008)

4.75

(.187)

±3.25

(±.128)

DIMENSIONS = MM

(INCHES)