CP0010360R0JE14 - Vishay [Dale]

Wirewound/Metal Oxide Resistors,

Commercial Power, Axial Lead

Vishay Dale

www.vishay.com For technical questions contact ww2aresistors@vishay.com Document Number: 30213

40 Revision: 02-Nov-06

FEATURES

•High performance for low cost

•Meets or exceeds requirements of EIA

Standard RS-344

•High power to size ratio

•Ceramic cases are available with circuit board

stand-offs (designated with a -3 model ending)

•Special inorganic potting compound and

ceramic case provide high thermal conductivity

in a fireproof package

** To specifically order a Wirewound sub-assembly for resistance

values that overlap between the Wirewound and Metal Oxide

technologies, the model will be a CPxxxx...85 for standard body and

CPxxxx...91 for body with stand-offs. To specifically order a Metal

Oxide sub-assembly for resistance values that overlap between the

Wirewound and Metal Oxide technologies, the model will be a

CPxxxx...100 for a standard body and CPxxxx...101 for body with

stand-offs. If no dash type is specified, either technology may be

supplied.

NOTE: Wirewound CP resistors can reliably function as a fuse and

as a resistor. Such components involve compromise between fusing

and resistive functions; therefore, each design should be tailored to

the application to ensure optimum performance. Contact factory by

using the e-mail address at the bottom of this page for design

assistance.

Available

Pb-free

RoHS*

COMPLIANT

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL

MODEL

POWER

RATING

40 °C

RESISTANCE RANGE

± 10 % Standard, ± 5 % Available

WEIGHT

(Typical)

WIREWOUND** METAL OXIDE**

CP0002 2 0.1 - 1K 100 - 12K 2.0

CP0002...3 2 0.1 - 1K 100 - 12K 2.2

CP0003 3 0.1 - 2K 150 - 22K 3.4

CP0003...3 3 0.1 - 2K 150 - 22K 3.6

CP0005 5 0.1 - 2.4K 150 - 27K 4.8

CP0005...3 5 0.1 - 2.4K 150 - 27K 5.0

CP0007 7 0.1 - 5K 1K - 35K 6.8

CP0007...3 7 0.1 - 5K 1K - 35K 7.0

CP0010 10 0.1 - 7K 1K - 40K 9.5

CP0010...3 10 0.1 - 7K 1K - 40K 9.9

CP0015 15 0.1 - 8K 1K - 40K 16.8

CP0015...3 15 0.1 - 8K 1K - 40K 17.4

CP0020 20 0.1 - 10K 1K - 45K 22.8

CP0020...3 20 0.1 - 10K - 23.6

CP0022 22 0.1 - 10K - 24.5

CP0022...3 22 0.1 - 10K - 25.3

CP0025 25 0.1 - 10K - 37.0

TECHNICAL SPECIFICATIONS

PARAMETER UNIT WIREWOUND

CHARACTERISTICS

Temperature Coefficient ppm/°C ± 600 below 1

± 300 1

and above

Short Time Overload - 5 x rated power for 5 sec.

Terminal Strength lb 10 minimum

Operating Temperature Range °C - 65/+ 275

Dielectric Withstanding Voltage V

1000

Maximum Working Voltage V (P × R)

1/2

PARAMETER UNIT METAL OXIDE

CHARACTERISTICS

Temperature Coefficient ppm/°C

± 300 for CP0002 to CP0005;

± 400 for CP0007 to CP0020

Short Time Overload - 5 x rated power for 5 sec.

Terminal Strength lb 10 minimum

Operating Temperature Range °C - 65/+ 225

Dielectric Withstanding Voltage V

1000

Maximum Working Voltage V (P x R)

1/2

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: CP000515R00JB143 (preferred part number format)

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL

(See Standard Electrical

Specifications Global

Model column for

options)

R = Decimal

K = Thousand

R1500 = 0.15 Ω

1K500 = 1500 Ω

H = ± 3.0 %

J = ± 5.0 %

K = ± 10.0 %

E14 = Lead (Pb)-free bulk pack

E31 = Lead (Pb)-free four layer bulk pack (Dash Number)

(up to 3 digits)

From 1 - 999

as applicable

B14 = Bulk pack

B31 = Four layer bulk pack

Historical Part Number example: CP-5-3 15 Ω5 % B14 (will continue to be accepted)

CP-5-3 15 Ω5 % B14

HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING

P000515R00JB14C 3

Wirewound/Metal Oxide Resistors,

Commercial Power, Axial Lead Vishay Dale

Document Number: 30213 For technical questions contact ww2aresistors@vishay.com www.vishay.com

Revision: 02-Nov-06 41

DIMENSIONS

* Potting compound may extend outside of ceramic case up to 0.060" [1.52] maximum per side.

** Dimensions for the metal oxide are: A = 2.360 [59.94], B = 0.570 [14.48], C = 0.530 [13.46], E = 0.032 [0.813], F= 1.000 [25.40]

MATERIAL SPECIFICATIONS

Element: Wirewound = Copper-nickel alloy or nickel-chrome

alloy, depending on resistance value

Metal Oxide = High temperature fired Metal Oxide film

Core: Wirewound = Woven fiberglass

Metal Oxide = Alumina ceramic

Body: Steatite ceramic case with inorganic potting

compound

End Caps: Tin plated steel

Terminals: Tinned copper

Part Marking: DALE, Model, Wattage, Value, Tolerance,

Date Code

CPxxxx...3

0.125

[3.18]

Typical

Typical A

CPxxxx

Typical

GLOBAL

MODEL

DIMENSIONS in inches [millimeters]

± 0.031

[0.794]

± 0.031

[0.794]

± 0.031

[0.794]

± 0.031

[0.794]

± 0.001 [0.025] F

WIREWOUND

± 0.125

[3.175]

METAL

OXIDE

MINIMUM

WIREWOUND METAL

OXIDE

CP0002 0.688 [17.46] 0.250 [6.35] 0.250 [6.35] - 0.032 [0.813] 0.0236 [0.600] 1.500 [38.10] 0.750 [19.05]

CP0002...3 0.688 [17.46] 0.250 [6.35] 0.250 [6.35] 0.313 [7.94] 0.032 [0.813] 0.0236 [0.600] 1.500 [38.10] 0.750 [19.05]

CP0003 0.875 [22.22] 0.313 [7.94] 0.313 [7.94] - 0.036 [0.914] 0.032 [0.813] 1.500 38.10] 1.000 [25.40]

CP0003...3 0.875 [22.22] 0.313 [7.94] 0.313 [7.94] 0.375 [9.52] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40]

CP0005 0.875 [22.22] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40]

CP0005...3 0.875 [22.22] 0.375 [9.52] 0.344 [8.73] 0.406 [10.32] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40]

CP0007 1.391 [35.32] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40]

CP0007...3 1.391 [35.32] 0.375 [9.52] 0.344 [8.73] 0.469 [11.91] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40]

CP0010 1.875 [47.62] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40]

CP0010...3 1.875 [47.62] 0.375 [9.52] 0.344 [8.73] 0.469 [11.91] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40]

CP0015 1.875 [47.62] 0.500 [12.70] 0.500 [12.70] - 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40]

CP0015...3 1.875 [47.62] 0.500 [12.70] 0.500 [12.70] 0.625 [15.87] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40]

CP0020** 2.500 [63.50] 0.500 [12.70] 0.500 [12.70] - 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40]

CP0020...3 2.500 [63.50] 0.500 [12.70] 0.500 [12.70] 0.625 [15.87] 0.036 [0.914] - 1.500 [38.10] -

CP0022 2.500 [63.50] 0.500 [12.70] 0.500 [12.70] - 0.036 [0.914] - 1.500 [38.10] -

CP0022...3 2.500 [63.50] 0.500 [12.70] 0.500 [12.70] 0.625 [15.87] 0.036 [0.914] - 1.500 [38.10] -

CP0025 2.500 [63.50] 0.625 [15.87] 0.625 [15.87] - 0.040 [1.016] - 1.500 [38.10] -

Derating

120

100

- 65 - 25 25 75 125 175 225 275

AMBIENT TEMPERATURE IN

Wirewound

Metal Oxide

PERFORMANCE

TEST CONDITIONS OF TEST TEST LIMITS (EIA-344)

Thermal Shock - 55 °C to + 275 °C (+ 225 °C for Metal Oxide), 5 cycles, 30 minute dwell time ± (5.0 % + 0.05 Ω) ΔR

Short Time Overload 5 x rated power for 5 seconds ± (4.0 % + 0.05 Ω) ΔR

Dielectric Withstanding Voltage 1000 Vrms, for one minute ± (2.0 % + 0.05 Ω) ΔR

Low Temperature Storage - 65 °C, full rated working voltage for 45 minutes ± (3.0 % + 0.05 Ω) ΔR

Humidity 75 °C, 90 % - 100 % RH, 240 hours ± (5.0 % + 0.05 Ω) ΔR

Load Life 1000 hours at rated power, + 25 °C, 1.5 hours “ON”, 0.5 hours “OFF” ± (10.0 % + 0.05 Ω) ΔR

Terminal Strength 5 pounds for 30 seconds; body twisted about axis, 3 360° rotations ± (2.0 % + 0.05 Ω) ΔR

Resistance to Solder Heat Terminal immersed 3.5 seconds in molten solder at 1/8" to 3/16" from body ± (4.0 % + 0.05 Ω) ΔR

Document Number: 91000 www.vishay.com

Revision: 18-Jul-08 1

Disclaimer

Legal Disclaimer Notice

Vishay

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.