MSM (Military M83401/04 to /09) www.vishay.com Vishay Dale Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ040 to RZ090, Single-In-Line, Molded SIP FEATURES * Isolated, bussed and dual terminator schematics available * MIL-PRF-83401 qualified * 0.195" (4.95 mm) "A" and 0.350" (8.89 mm) "C" maximum seated heights * Thick film resistive elements * TCR available in "K" ( ( 300 ppm/C) characteristic 100 ppm/C) or "M" * All device leads are hot-solder dipped * Rugged molded case construction * Compatible with automatic insertion equipment * 100 % screen tested per group A, subgroup 1 of MIL-PRF-83401 * All devices are capable of passing the MIL-STD-202, method 210, condition D "Resistance to Soldering Heat" test * Available in tube pack STANDARD ELECTRICAL SPECIFICATIONS POWER VISHAY POWER RATING DALE MIL RATING MIL MODEL/ SPEC. SCHEMATIC ELEMENT PACKAGE STYLE P70 C PIN NO/ SHEET P70 C PROFILE W W MSM06C MSM08C MSM10C MSM06A MSM08A MSM10A RZ040 RZ050 RZ060 RZ070 RZ080 RZ090 04 05 06 07 08 09 RESISTANCE RANGE TOLERANCE (1) % TEMPERATURE COEFFICIENT (2) (-55 C to +125 C) ppm/C 100, 300 01 (C) 0.20 1.00 10 to 1M 1, 2, 5 03 (G) 0.20 0.60 10 to 1M 1, 2, 5 100, 300 05 (H) 0.11 0.88 Consult factory 1, 2, 5 100, 300 01 (C) 0.20 1.40 10 to 1M 1, 2, 5 100, 300 03 (G) 0.20 0.80 10 to 1M 1, 2, 5 100, 300 05 (H) 0.11 1.32 Consult factory 1, 2, 5 100, 300 01 (C) 0.20 1.80 10 to 1M 1, 2, 5 100, 300 03 (G) 0.20 1.00 10 to 1M 1, 2, 5 100, 300 05 (H) 0.11 1.80 Consult factory 1, 2, 5 100, 300 100, 300 01 (C) 0.12 0.60 10 to 1M 1, 2, 5 03 (G) 0.12 0.36 10 to 1M 1, 2, 5 100, 300 05 (H) 0.07 0.60 Consult factory 1, 2, 5 100, 300 01 (C) 0.12 0.84 10 to 1M 1, 2, 5 100, 300 03 (G) 0.12 0.48 10 to 1M 1, 2, 5 100, 300 05 (H) 0.07 0.84 Consult factory 1, 2, 5 100, 300 100, 300 01 (C) 0.12 1.08 10 to 1M 1, 2, 5 03 (G) 0.12 0.60 10 to 1M 1, 2, 5 100, 300 05 (H) 0.07 1.08 Consult factory 1, 2, 5 100, 300 WEIGHT g 0.7 0.9 1.1 0.4 0.5 0.6 Notes (1) 2 % standard, 1 % and 5 % available. (2) K = 100 ppm/C; M = 300 ppm/C. Revision: 10-Sep-15 Document Number: 31514 1 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MSM (Military M83401/04 to /09) www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M8340107K1003GCD03 (preferred part numbering format) M 8 3 MIL STYLE M83401 4 0 1 0 7 SPEC SHEET CHARACTERISTIC 04 = 6 pin, "C" profile 05 = 8 pin, "C" profile 06 = 10 pin, "C" profile 07 = 6 pin, "A" profile 08 = 8 pin, "A" profile 09 = 10 pin, "A" profile K = 100 ppm M = 300 ppm K 1 0 0 3 G RESISTANCE VALUE TOLERANCE CODE 3 digit significant figure, followed by a multiplier 10R0 = 10 3302 = 33 k 1004 = 1 M C D 0 3 SCHEMATIC PACKAGING F=1% G=2% J=5% C = Bussed G = Isolated D03 = Tin/lead, tube DSL = Tin/lead, tube, single lot date code Historical Part Number example: M8340107K1003GC (will continue to be accepted) M83401 07 K 1003 G C D03 MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE SCHEMATIC PACKAGING New Global Part Numbering: M8340104KA001GHD03 (preferred part numbering format) M 8 3 MIL STYLE M83401 4 0 1 0 4 SPEC SHEET CHARACTERISTIC 04 = 6 pin, "C" profile 05 = 8 pin, "C" profile 06 = 10 pin, "C" profile 07 = 6 pin, "A" profile 08 = 8 pin, "A" profile 09 = 10 pin, "A" profile K = 100 ppm M = 300 ppm K A 0 0 1 G RESISTANCE VALUE TOLERANCE CODE Per std. MIL Spec (see Impedance Codes table) H D 0 3 SCHEMATIC PACKAGING F=1% G=2% J=5% H = Dual terminator D03 = Tin/lead, tube DSL = Tin/lead, tube, single lot date code Historical Part Number example: M8340104KA001GH (will continue to be accepted) M83401 04 K A001 G H D03 MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE SCHEMATIC PACKAGING Note * For additional information on packaging, refer to the Through Hole Network Packaging document (www.vishay.com/doc?31542). DIMENSIONS in inches (millimeters) "A" Profile 0.030 + 0.005 - 0.015 (0.762 + 0.127 - 0.381) "C" Profile A 0.187 + 0.008 - 0.010 (4.75 + 0.203 - 0.254) Pin # 1 0.040 + 0.009 - 0.015 (1.02 + 0.229 - 0.381) 0.100 0.005 (2.54 0.127) Non-Accumulative 0.098 max. (2.49 max.) 0.017 0.004 (0.432 0.102) B C Equal Space VISHAY DALE MODEL MSM08 MSM10 Revision: 10-Sep-15 0.342 + 0.008 - 0.010 (8.69 + 0.203 - 0.254) Pin # 1 0.040 + 0.009 - 0.015 (1.02 + 0.229 - 0.381) 0.100 0.005 (2.54 0.127) Non-Accumulative 0.017 0.004 (0.432 0.102) B C Equals Spaces 0.135 + 0.015 - 0.010 (3.43 + 0.381 - 0.254) 0.098 max. (2.49 max.) MSM06 0.012 0.004 (0.305 0.102) 0.135 + 0.015 - 0.010 (3.43 + 0.381 - 0.254) A 0.030 + 0.005 - 0.015 (0.762 + 0.127 - 0.381) 0.583 0.015 (14.81 0.381) A B 0.500 (12.70) 0.783 0.015 (19.89 0.381) 0.983 0.015 (24.97 0.381) 0.700 (17.78) 0.900 (22.86) C 5 7 9 0.012 0.004 (0.305 0.102) Document Number: 31514 2 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MSM (Military M83401/04 to /09) www.vishay.com Vishay Dale TECHNICAL SPECIFICATIONS PARAMETER MECHANICAL SPECIFICATIONS UNIT MSM SERIES Maximum Operating Voltage VDC 50 Voltage Coefficient of Resistance Veff < 50 ppm Dielectric Strength VAC 200 min. Insulation Resistance 10 000M Operating Temperature Range C -55 to +125 Storage Temperature Range C -55 to +150 Body Molded epoxy Terminals Copper alloy, hot-solder dipped Solderability Per MIL-PRF-83401 CAGE CODE: 91637 and 2799A (formerly SH903) MILITARY IMPEDANCE CODES CODE R1 () R2 () CODE R1 () R2 () A001 82 130 A011 330 680 A002 120 200 A012 1.5K 3.3K A003 130 210 A013 3K 6.2K A004 160 260 A014 180 270 A005 180 240 A015 270 270 A006 180 390 A016 560 560 A007 220 270 A017 560 1.2K A008 220 330 A018 620 2.7K A009 330 390 A019 (1) 150 1K 470 (1) 1K 1K A010 330 A020 Note (1) Offered for the M83401/09 product only Revision: 10-Sep-15 Document Number: 31514 3 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MSM (Military M83401/04 to /09) www.vishay.com Vishay Dale DERATING 01 Schematic "A" Profile "C" Profile MSM10A Package 1.08 MSM10C Package Power Rating (W) Power Rating (W) 1.80 MSM08A Package 0.84 MSM06A Package 0.60 Single Resistor 0.12 - 55 0 + 25 Single Resistor 0.20 - 55 + 70 + 125 + 150 Ambient Temperature C + 25 MSM10A Package MSM08A Package MSM08C Package 0.80 MSM06C Package MSM06A Package Single Resistor 0.20 0.12 Single Resistor - 55 0 + 25 + 70 + 125 + 150 - 55 0 + 25 Ambient Temperature C 05 Schematic "A" Profile 1.08 0.84 0.60 MSM10A Package MSM08A Package 1.80 1.32 MSM10C Package MSM08C Package MSM06A Package 0.88 0.07 + 70 + 125 + 150 Ambient Temperature C "C" Profile Power Rating (W) Power Rating (W) + 70 + 125 + 150 Ambient Temperature C MSM10C Package 1.00 0.60 0.36 0 "C" Profile Power Rating (W) Power Rating (W) 0.48 MSM06C Package 1.00 03 Schematic "A" Profile 0.60 MSM08C Package 1.40 0.11 Single Resistor - 55 0 + 25 + 70 + 125 + 150 Ambient Temperature C Revision: 10-Sep-15 MSM06C Package - 55 Single Resistor 0 + 25 + 70 + 125 + 150 Ambient Temperature C Document Number: 31514 4 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MSM (Military M83401/04 to /09) www.vishay.com Vishay Dale CIRCUIT APPLICATIONS 01 Schematic 5, 7 or 9 resistors with one pin common "A" Profile MSM06A01 (M8340107xxxxxxC) MSM08A01 (M8340108xxxxxxC) MSM10A01 (M8340109xxxxxxC) "C" Profile MSM06C01 (M8340104xxxxxxC) MSM08C01 (M8340105xxxxxxC) MSM10C01 (M8340106xxxxxxC) The MSM06A01, MSM08A01, MSM10A01, MSM06C01, MSM08C01, and MSM10C01 molded single-in-line resistor networks provide the user with a choice of 5, 7, or 9 nominally equal resistors, each connected to a common pin (Pin No. 1). Commonly used in the following applications: 1 2 3 n-1 n * "Wired OR" pull-up * Power Gate pull-up * MOS/ROM pull-up/pull-down 03 Schematic * Open collector pull-up * TTL input pull-down * TTL unused gate pull-up 3, 4 or 5 isolated resistors "A" Profile MSM06A03 (M8340107xxxxxxG) MSM08A03 (M8340108xxxxxxG) MSM10A03 (M8340109xxxxxxG) "C" Profile MSM06C03 (M8340104xxxxxxG) MSM08C03 (M8340105xxxxxxG) MSM10C03 (M8340106xxxxxxG) The MSM06A03, MSM08A03, MSM10A03, MSM06C03, MSM08C03, and MSM10C03 molded single-in-line resistor networks provide the user with a choice of 3, 4, or 5 nominally equal resistors. Each resistor is isolated from all others. Commonly used in the following applications: 1 2 3 4 n-1 n * "Wired OR" pull-up * Power driven pull-up * Power gate pull-up * Line termination 05 Schematic 4, 6 or 8 resistor pairs "A" Profile MSM06A05 (M8340107xxxxxxH) MSM08A05 (M8340108xxxxxxH) MSM10A05 (M8340109xxxxxxH) R2 R1 1 * Long-line impedance balance * LED current limiting * ECL output pull-down * TTL input pull-down 2 3 "C" Profile MSM06C05 (M8340104xxxxxxH) MSM08C05 (M8340105xxxxxxH) MSM10C05 (M8340106xxxxxxH) The MSM06A05, MSM08A05, MSM10A05, MSM06C05, MSM08C05, and MSM10C05 molded single-in-line resistor networks provide the user with a choice of 4, 6, or 8 pair of R1/R2 resistor values for pulse squaring and TTL dual-line terminating requirements. n-1 n PERFORMANCE TEST Power Conditioning Thermal Shock Short Time Overload Low Temperature Operation Moisture Resistance Resistance to Soldering Heat Shock CONDITIONS MAX. R (TYPICAL TEST LOTS) 1.5 x rated power, applied 1.5 h "ON" and 0.5 h "OFF" for 100 h 4 h at +25 C ambient temperature 0.50 % R 5 cycles between -65 C and +125 C 0.50 % R 2.5 x rated working voltage for 5 s 0.25 % R (Characteristic K) 0.50 % R (Characteristic M) 45 min at full rated working voltage at -65 C 0.25 % R (Characteristic K) 0.50 % R (Characteristic M) 240 h with humidity ranging from 80 % RH to 98 % RH 0.50 % R Leads immersed in +260 C solder to within 1/16" of body for 10 s 0.25 % R Total of 18 shocks at 100 g's 0.25 % R Vibration 12 h at maximum of 20 g's between 10 Hz and 2000 Hz 0.25 % R Load Life 1000 h at +70 C, rated power applied 1.5 h "ON", 0.5 h "OFF" for full 1000 h period 0.50 % R (Characteristic K) 2.00 % R (Characteristic M) 4 1/2 pound pull for 30 s 0.25 % R Terminal Strength Insulation Resistance Dielectric Withstanding Voltage Revision: 10-Sep-15 10 000 M (minimum) - No evidence of arcing or damage (200 VRMS for 1 min) - Document Number: 31514 5 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000