Preface RUGGEDCOM SFP Transceivers Catalog 04/2019 RC1251-EN-14 Introduction 1 Copper SFP Transceivers 2 Fast Ethernet SFP Transceivers 3 Active 100 Mbps SFP Transceivers 4 Gigabit Ethernet SFP Transceivers 5 Bidirectional Gigabit Ethernet SFP Transceivers 6 10-Gigabit Ethernet SFP+ Transceivers 7 Installation/Removal 8 RUGGEDCOM SFP Transceivers Catalog Copyright (c) 2019 Siemens Canada Ltd All rights reserved. Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized except where expressly permitted. Violations are liable for damages. All rights reserved, particularly for the purposes of patent application or trademark registration. This document contains proprietary information, which is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without the prior written consent of Siemens Canada Ltd. Disclaimer Of Liability Siemens has verified the contents of this document against the hardware and/or software described. However, deviations between the product and the documentation may exist. Siemens shall not be liable for any errors or omissions contained herein or for consequential damages in connection with the furnishing, performance, or use of this material. The information given in this document is reviewed regularly and any necessary corrections will be included in subsequent editions. We appreciate any suggested improvements. We reserve the right to make technical improvements without notice. Registered Trademarks RUGGEDCOMTM and ROSTM are trademarks of Siemens Canada Ltd. Other designations in this manual might be trademarks whose use by third parties for their own purposes would infringe the rights of the owner. Security Information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens' products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit https://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit https:// support.automation.siemens.com. Warranty For warranty details, visit https://www.siemens.com/ruggedcom or contact a Siemens customer service representative. Contacting Siemens Address Siemens Canada Ltd Industry Sector 300 Applewood Crescent Concord, Ontario Canada, L4K 5C7 ii Telephone Toll-free: 1 888 264 0006 Tel: +1 905 856 5288 Fax: +1 905 856 1995 E-mail ruggedcom.info.i-ia@siemens.com Web https://www.siemens.com/ruggedcom RUGGEDCOM SFP Transceivers Catalog Table of Contents Table of Contents Preface ............................................................................................................. v Alerts .................................................................................................................................................. v Training .............................................................................................................................................. vi Customer Support ............................................................................................................................... vi Ordering RUGGEDCOM Products ........................................................................................................... vi Chapter 1 Introduction ..................................................................................................... 1 1.1 Selecting an SFP Transceiver .......................................................................................................... 2 1.2 Available SFP Transceivers ............................................................................................................. 3 Chapter 2 Copper SFP Transceivers ................................................................................... 5 2.1 RUGGEDCOM SFP1112-1 ............................................................................................................... 6 Chapter 3 Fast Ethernet SFP Transceivers .......................................................................... 9 3.1 RUGGEDCOM SFP1121-1FX2 ........................................................................................................ 10 3.2 RUGGEDCOM SFP1131-1FX20 ...................................................................................................... 12 3.3 RUGGEDCOM SFP1131-1FX50 ...................................................................................................... 14 3.4 RUGGEDCOM SFP1131-1FX90 ...................................................................................................... 16 Chapter 4 Active 100 Mbps SFP Transceivers ................................................................... 17 4.1 RUGGEDCOM SFP1121-1FX2A ...................................................................................................... 18 4.2 RUGGEDCOM SFP1131-1FX10A .................................................................................................... 20 4.3 RUGGEDCOM SFP1131S-1FX40A .................................................................................................. 22 Chapter 5 Gigabit Ethernet SFP Transceivers ................................................................... 25 5.1 RUGGEDCOM SFP1122-1SX ......................................................................................................... 26 5.2 RUGGEDCOM SFP1122-1SX2 ........................................................................................................ 28 5.3 RUGGEDCOM SFP1132-1LX10 ...................................................................................................... 29 5.4 RUGGEDCOM SFP1132-1LX25 ...................................................................................................... 31 5.5 RUGGEDCOM SFP1132-1LX40 ...................................................................................................... 32 5.6 RUGGEDCOM SFP1132-1LX70 ...................................................................................................... 33 iii Table of Contents RUGGEDCOM SFP Transceivers Catalog 5.7 RUGGEDCOM SFP1132-1LX100 .................................................................................................... 34 5.8 RUGGEDCOM SFP1132-1LX115 .................................................................................................... 35 Chapter 6 Bidirectional Gigabit Ethernet SFP Transceivers ................................................ 37 6.1 RUGGEDCOM SFP1132-1BX10R .................................................................................................... 38 6.2 RUGGEDCOM SFP1132-1BX10T .................................................................................................... 40 6.3 RUGGEDCOM SFP1132-1BX40R .................................................................................................... 42 6.4 RUGGEDCOM SFP1132-1BX40T .................................................................................................... 44 Chapter 7 10-Gigabit Ethernet SFP+ Transceivers ............................................................. 47 7.1 RUGGEDCOM SFP2123-1SR .......................................................................................................... 48 7.2 RUGGEDCOM SFP2133-1LR10 ...................................................................................................... 50 7.3 RUGGEDCOM SFP2133-1ER40 ...................................................................................................... 52 7.4 RUGGEDCOM SFP2133-1ZR80 ...................................................................................................... 54 Chapter 8 Installation/Removal ........................................................................................ 55 8.1 Handling SFP Transceivers ........................................................................................................... 56 8.2 Required Tools ............................................................................................................................ 57 8.3 Installation ................................................................................................................................. 58 8.4 Removal ..................................................................................................................................... 60 iv RUGGEDCOM SFP Transceivers Catalog Preface Preface This document details the available SFP transceivers, including compatibility with the RUGGEDCOM product line, technical specifications, installation/removal instructions, and ordering information. It is intended for use by network technical support personnel responsible for the installation, commissioning and maintenance of routers and switches. It is also recommended for use by network and system planners, system programmers, and line technicians. CONTENTS * "Alerts" * "Training" * "Customer Support" * "Ordering RUGGEDCOM Products" Alerts The following types of alerts are used when necessary to highlight important information. DANGER! DANGER alerts describe imminently hazardous situations that, if not avoided, will result in death or serious injury. WARNING! WARNING alerts describe hazardous situations that, if not avoided, may result in serious injury and/or equipment damage. CAUTION! CAUTION alerts describe hazardous situations that, if not avoided, may result in equipment damage. IMPORTANT! IMPORTANT alerts provide important information that should be known before performing a procedure or step, or using a feature. NOTE NOTE alerts provide additional information, such as facts, tips and details. Alerts v RUGGEDCOM SFP Transceivers Preface Catalog Training Siemens offers a wide range of educational services ranging from in-house training of standard courses on networking, Ethernet switches and routers, to on-site customized courses tailored to the customer's needs, experience and application. Siemens' Educational Services team thrives on providing our customers with the essential practical skills to make sure users have the right knowledge and expertise to understand the various technologies associated with critical communications network infrastructure technologies. Siemens' unique mix of IT/Telecommunications expertise combined with domain knowledge in the utility, transportation and industrial markets, allows Siemens to provide training specific to the customer's application. For more information about training services and course availability, visit https://www.siemens.com/ruggedcom or contact a Siemens Sales representative. Customer Support Customer support is available 24 hours, 7 days a week for all Siemens customers. For technical support or general information, contact Siemens Customer Support through any of the following methods: Online Visit http://www.siemens.com/automation/support-request to submit a Support Request (SR) or check on the status of an existing SR. Telephone Call a local hotline center to submit a Support Request (SR). To locate a local hotline center, visit http:// www.automation.siemens.com/mcms/aspa-db/en/automation-technology/Pages/default.aspx. Mobile App Install the Industry Online Support app by Siemens AG on any Android, Apple iOS or Windows mobile device and be able to: * * * * Access Siemens' extensive library of support documentation, including FAQs and manuals Submit SRs or check on the status of an existing SR Contact a local Siemens representative from Sales, Technical Support, Training, etc. Ask questions or share knowledge with fellow Siemens customers and the support community Ordering RUGGEDCOM Products Use the RUGGEDCOM-Selector to select and configure RUGGEDCOM products and accessories. Once selected, an item(s) can be transferred to the Siemens Industry Mall and ordered. RUGGEDCOM-Selector http://www.siemens.com/ruggedcom-selector. For more information, refer to https://www.siemens.com/ruggedcom. vi Training RUGGEDCOM SFP Transceivers Catalog Chapter 1 Introduction Introduction Siemens offers a wide range of convenient and cost-effective Fast Ethernet Small Form-Factor Pluggable (SFP) transceivers for select RUGGEDCOM routers and switches. SFP transceivers offer a variety of options for speed, distance and interfaces to extend the reach and functionality of networks. IMPORTANT! Only use SFP transceivers approved by Siemens for RUGGEDCOM products. Siemens accepts no liability as a result of performance issues related in whole or in part to third-party components. IMPORTANT! SFP transceivers contain no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void. Changes or modifications not expressly approved by Siemens could invalidate specifications, test results, and agency approvals, and void the user's authority to operate the product. NOTE All SFP transceivers are compatible with the Small Form-Factor Pluggable 20-pin Multi-Source Agreement (MSA). NOTE Maximum segment length is greatly dependent on factors such as fiber quality and the number of patches and splices. Consult a Siemens sales associate when determining maximum segment lengths. NOTE All optical power numbers are listed as dBm averages. CONTENTS * Section 1.1, "Selecting an SFP Transceiver" * Section 1.2, "Available SFP Transceivers" 1 Chapter 1 Introduction RUGGEDCOM SFP Transceivers Catalog Section 1.1 Selecting an SFP Transceiver The following process for selecting an SFP transceiver is recommended: 1. Determine the basic application requirements, such as SFP type, link speed and operating distance, and then select an SFP transceiver. 2. Determine which RUGGEDCOM product(s) support the chosen SFP transceiver. 3. If the chosen SFP transceiver will be connected a fixed port or to a non-RUGGEDCOM device, review the full technical specifications for the SFP transceiver to make sure it is compatible with the other end of the link. For a list of available SFP transceivers and general specifications, refer to Section 1.2, "Available SFP Transceivers". If assistance is required to select the appropriate SFP transceiver for the application, contact Siemens Customer Support. 2 Selecting an SFP Transceiver RUGGEDCOM SFP Transceivers Catalog Chapter 1 Introduction Section 1.2 Available SFP Transceivers Each available SFP transceiver has been tested for compatibility with the following RUGGEDCOM routers and switches. Use in any other RUGGEDCOM or third-party router/switch is not supported or recommended by Siemens. NOTE Compatibility with some RUGGEDCOM routers/switches may contain restrictions. For more information about product-specific deviations, refer to the detailed description of the relevant SFP transceiver(s) in this catalog. Available SFP Transceivers 3 4 10 Gbps SM MM SM 6GK6000-8FB51-0AA0 6GK6000-8FB52-0AA0 6GK6000-8FB53-0AA0 6GK6000-8FB54-0AA0 SFP1132-1BX10R SFP1132-1BX10T SFP1132-1BX40R SFP1132-1BX40T SFP2133-1LR10 10 80 40 0.4 SFP2133-1ZR80 SFP2133-1ER40 SFP2123-1SR SFP1132-1LX100 SFP1132-1LX115 SFP1132-1LX70 100 115 70 SFP1132-1LX40 SFP1132-1LX25 40 25 SFP1132-1LX10 SFP1122-1SX2 2 10 SFP1122-1SX 6GK6000-8FG52-0AA0 6GK6000-8FT52-0AA0 6GK6000-8FT53-0AA0 6GK6000-8FT51-0AA0 6GK6000-8FT50-0AA0 6GK6000-8FG55-0AA0 6GK6000-8FE56-0AA0 6GK6000-8FG54-0AA0 6GK6000-8FG57-0AA0 6GK6000-8FG53-0AA0 6GK6000-8FE58-0AA0 6GK6000-8FG51-0AA0 6GK6000-8FE54-0AA0 6GK6000-8FE53-0AA0 SFP1131-1FX90 SFP1131-1FX50 0.5 40 10 90 50 6GK6000-8FE51-0AA0 6GK6000-8FE52-0AA0 RS940G MM SM SM SFP1131-1FX20 SFP1121-1FX2 RSG2288 1 Gbps 1 Gbps Single-fiber Bidirectional 100 Mbps 2 RSL910 20 6GK6000-8FE60-0AA0 6GK6000-8FE62-0AA0 RS950G MM SFP1131S-1FX40A SFP1131-1FX10A Media 10 Distance (km) 40 RS900G SM RS900GP 100 Mbps Active RSG908C RSG910C RSG920P RSG2100(P) RSG2200 RSG2300(P) RSG2488 6GK6000-8FE50-0AA0 RSG907R 6GK6000-8CG01-0AA0 RSG909R SFP1112-1 RX1400 SFP1121-1FX2A Ports 1-4 0.1 Modules FG50 2 FX50/6FX50 4FG50 MM Article Number SM69 RJ45 SFP Name RX15xx SM09/SM39 Copper Type RX5000 8FX50 RST2228(P) Chapter 1 Introduction RUGGEDCOM SFP Transceivers Catalog Available SFP Transceivers RUGGEDCOM SFP Transceivers Catalog Chapter 2 Copper SFP Transceivers Copper SFP Transceivers The following copper triple-speed SFP transceivers are available from Siemens for select RUGGEDCOM routers and switches. To determine compatibility, refer to Section 1.2, "Available SFP Transceivers". CONTENTS * Section 2.1, "RUGGEDCOM SFP1112-1" 5 Chapter 2 RUGGEDCOM SFP Transceivers Copper SFP Transceivers Catalog Section 2.1 RUGGEDCOM SFP1112-1 Siemens' RUGGEDCOM SFP1112-1 is a 1 Gbps copper SFP transceiver that operates within a wide temperature range (0 to 70 C or 32 to 158 F) and provides high performance Gigabit Ethernet communication up to 100 m (328.1 ft). NOTE This SFP transceiver is not recommended for use with IEEE 1588. Highlights * Compliant with SFP MSA and IEEE 802.3ab for 10/100/1000Base-T * Transmission distance up to 100 m (328.1 ft) Specifications Characteristics * Bail latch * Hot swappable * RoHS compliant Environment Speed 10/100/1000 Mbps Operating Temperature 0 to 70 C (32 to 158 F) Connector RJ-45 Storage Temperature -40 to 85 C (-40 to 185 F) Cable Type > CAT-5e Duplex FDX/HDX Wiring Standard TIA/EIA T568A/B Nominal Distance 100 m (328.1 ft) Isolation 1.5 kV Product-Specific Deviations The RUGGEDCOM SFP1112-1 supports the following ratings when installed in the specified Siemens RUGGEDCOM routers and/or switches: Product(s) Specification Rating RUGGEDCOM RSG907R, RSG909R Speed Supports only 1000 Mbps on the coupler port on RUGGEDCOM ROS v5.2 firmware versions RUGGEDCOM RSG908C, RSG910C Speed Supports only 1000 Mbps on RUGGEDCOM ROS v5.2 firmware versions Regulatory Compliance The RUGGEDCOM SFP1112-1 meets the following standards when installed in Siemens RUGGEDCOM routers and/ or switches: 6 RUGGEDCOM SFP1112-1 RUGGEDCOM SFP Transceivers Chapter 2 Catalog Copper SFP Transceivers Feature Standard Performance Electromagnetic Interference (EMI) FCC Class A, CE Class A, VCCI Class A, C-Tick Compliant RoHS EU RoHS Directive 2002/95/EC Compliant Ordering Information Article Number 6GK6000-8CG01-0AA0 RUGGEDCOM SFP1112-1 Name RUGGEDCOM SFP1112-1 Description 1000Base-T SFP - RJ45, 100 m 7 Chapter 2 Copper SFP Transceivers 8 RUGGEDCOM SFP Transceivers Catalog RUGGEDCOM SFP1112-1 RUGGEDCOM SFP Transceivers Catalog Chapter 3 Fast Ethernet SFP Transceivers Fast Ethernet SFP Transceivers The following Fast Ethernet SFP transceivers are available from Siemens for select RUGGEDCOM routers and switches. To determine compatibility, refer to Section 1.2, "Available SFP Transceivers". CONTENTS * Section 3.1, "RUGGEDCOM SFP1121-1FX2" * Section 3.2, "RUGGEDCOM SFP1131-1FX20" * Section 3.3, "RUGGEDCOM SFP1131-1FX50" * Section 3.4, "RUGGEDCOM SFP1131-1FX90" 9 Chapter 3 RUGGEDCOM SFP Transceivers Fast Ethernet SFP Transceivers Catalog Section 3.1 RUGGEDCOM SFP1121-1FX2 Siemens' RUGGEDCOM SFP1121-1FX2 industrial grade 100 Mbps fiber optic fast Ethernet SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Fast Ethernet communication up to 2 km (1.2 mi) using multi-mode fiber. Highlights * Compliant with SFP MSA and IEEE 802.3ab for 100Base-FX * Transmission distance up to 2 km (1.2 mi) * LC duplex connector optical interface * Operates with 50/125 m and 62.5/125 m multi-mode fiber Specifications Optical Characteristics * Bail latch * Hot swappable * RoHS compliant Cabling Transmit Power (50/125 m) -23.5 to -14.0 dBm Speed 100 Mbps Transmit Power (62.5/125 m) -20.0 to -14.0 dBm Mode MM (Multi-Mode) Receiver Sensitivity -31.0 to -3.0 dBm Interface FX Power Budget (50/125 m) 7.5 dB Connector LC Power Budget (62.5/125 m) 11 dB Cable Type 50/125 or 62.5/125 m Wavelength 1310 nm Nominal Distance 2 km (1.2 mi) Environment Operating Temperature -40 to 85 C (-40 to 185 F) Storage Temperature -40 to 100 C (-40 to 212 F) Regulatory Compliance The RUGGEDCOM SFP1121-1FX2 meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883C HBM 2 kV Electrostatic Discharge (ESD) to the Duplex LC Receptacle Variation of IEC 61000-4-2 Compliant Electromagnetic Interference (EMI) CENELEC CEN55022 Class B Compliant Immunity Variation of IEC 61000-4-3 Compliant Eye Safety AEL Class 1 Compliant EN 60825-1 (+A11) RoHS 10 EU RoHS Directive 2002/95/EC Compliant RUGGEDCOM SFP1121-1FX2 RUGGEDCOM SFP Transceivers Chapter 3 Catalog Fast Ethernet SFP Transceivers Ordering Information Article Number 6GK6000-8FE51-0AA0 RUGGEDCOM SFP1121-1FX2 Name RUGGEDCOM SFP1121-1FX2 Description 100Base-FX SFP - MM, 1310 nm, LC, 2 km 11 Chapter 3 RUGGEDCOM SFP Transceivers Fast Ethernet SFP Transceivers Catalog Section 3.2 RUGGEDCOM SFP1131-1FX20 Siemens' RUGGEDCOM SFP1131-1FX20 industrial grade 100 Mbps fiber optic fast Ethernet SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Fast Ethernet communication up to 20 km (12.4 mi) using single-mode fiber. NOTE Maximum distance is 15 km (9.3 mi) in OC-3 mode. Highlights * Compliant with SFP MSA for 100Base-FX * Transmission distance up to 20 km (12.4 mi) * Bail latch * Hot swappable * LC duplex fiber connector * RoHS compliant Specifications Optical Characteristics Cabling Transmit Power -15 to -8 dBm Speed 100 Mbps Receiver Sensitivity -31 to -8 dBm Interface FX Power Budget 16 dB Mode SM (Single-Mode) Connector LC Cable Type 9/125 m Wavelength 1300 nm Nominal Distance 20 km (12.4 mi) Environment Operating Temperature -40 to 85 C (-40 to 185 F) Operating Relative Humidity 0 to 85% (non-condensing) Storage Temperature -40 to 85 C (-40 to 185 F) Regulatory Compliance The RUGGEDCOM SFP1131-1FX20 complies with the following regulatory requirements when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883C, Method 3015.4 Class 2 (2000 V) Electrostatic Discharge (ESD) to the Duplex LC Receptacle Bellcore GR1089-CORE Electromagnetic Interference (EMI) FCC Class B Compliant Immunity Variation of IEC 61000-4-3 Compliant Eye Safety US FDA CDRH AEL Class 1 Compliant with Class 1 laser product JEDEC/EIA JESD22-A114-A 25 kV Air Discharge 10 Zaps at 8 kV (contact discharge) on the electrical faceplate on panel IEC/EN 60825-1 and 60825-2 12 RUGGEDCOM SFP1131-1FX20 RUGGEDCOM SFP Transceivers Chapter 3 Catalog Fast Ethernet SFP Transceivers Feature Standard Performance EN 60950 Class 1 RoHS EU RoHS Directive 2002/95/EC Compliant Ordering Information Article Number 6GK6000-8FE52-0AA0 RUGGEDCOM SFP1131-1FX20 Name RUGGEDCOM SFP1131-1FX20 Description 100Base-FX SFP - SM, 1300 nm, LC, 20 km 13 Chapter 3 RUGGEDCOM SFP Transceivers Fast Ethernet SFP Transceivers Catalog Section 3.3 RUGGEDCOM SFP1131-1FX50 Siemens' RUGGEDCOM SFP1131-1FX50 industrial grade 100 Mbps fiber optic fast Ethernet SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Fast Ethernet communication up to 50 km (31.1 mi) using single-mode fiber. Highlights * Compliant with SFP MSA and SFF 8074i for 100BaseFX * Compliant with SFF-8472 Digital Diagnostic Monitoring Interface * LC duplex fiber connector * Bail latch * Hot swappable * RoHS compliant * Compliant with ITU-T G957 STM-1 L1.1 Optical Interface * Compliant with Telcordia GR253 OC3 LR-1 Optical Interface * Transmission distance up to 50 km (31.1 mi) Specifications Optical Characteristics Cabling Transmit Power -5 to -0 dBm Speed 100 Mbps Receiver Sensitivity -34 to -0 dBm Mode SM (Single-Mode) Power Budget 29 Interface FX Connector LC Cable Type 9/125 m Wavelength 1300 nm Nominal Distance 50 km (31.1 mi) Environment Operating Temperature -40 to 85 C (-40 to 185 F) Operating Relative Humidity 0 to 85% (non-condensing) Storage Temperature -40 to 85 C (-40 to 185 F) Regulatory Compliance The RUGGEDCOM SFP1131-1FX50 complies with the following regulatory requirements when installed in Siemens RUGGEDCOM routers and/or switches: Feature 14 Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883C, Method 3015.4 Class 2 (2000 V) Electrostatic Discharge (ESD) to the Duplex LC Receptacle Bellcore GR1089-CORE Electromagnetic Interference (EMI) FCC Class B Compliant Immunity Variation of IEC 61000-4-3 Compliant Eye Safety US FDA CDRH AEL Class 1 Class 1 JEDEC/EIA JESD22-A114-A 25 kV Air Discharge 10 Zaps at 8 kV (contact discharge) on the electrical faceplate on panel RUGGEDCOM SFP1131-1FX50 RUGGEDCOM SFP Transceivers Chapter 3 Catalog Fast Ethernet SFP Transceivers Feature Standard Performance IEC/EN 60825-1 and 60825-2 EN 60950 Class 1 RoHS EU RoHS Directive 2002/95/EC Compliant Ordering Information Article Number 6GK6000-8FE53-0AA0 RUGGEDCOM SFP1131-1FX50 Name RUGGEDCOM SFP1131-1FX50 Description 100Base-FX SFP - SM, 1300 nm, LC, 50 km 15 Chapter 3 RUGGEDCOM SFP Transceivers Fast Ethernet SFP Transceivers Catalog Section 3.4 RUGGEDCOM SFP1131-1FX90 Siemens' RUGGEDCOM SFP1131-1FX90 industrial grade 100 Mbps fiber optic fast Ethernet SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Fast Ethernet communication up to 90 km (55.9 mi) using single-mode fiber. Highlights * Compliant with SFP MSA for 100Base-FX * Transmission distance up to 90 km (55.9 mi) * LC duplex fiber connector Specifications Optical Characteristics * Bail latch * Hot swappable * RoHS compliant Cabling Transmit Power -5 to -0 dBm Speed 100 Mbps Receiver Sensitivity -34 to -10 dBm Mode SM (Single-Mode) Power Budget 29 Interface FX Connector LC Cable Type 9/125 m Wavelength 1550 nm Nominal Distance 90 km (55.9 mi) Environment Operating Temperature -40 to 85 C (-40 to 185 F) Operating Relative Humidity 0 to 85% (non-condensing) Storage Temperature -40 to 85 C (-40 to 185 F) Regulatory Compliance The RUGGEDCOM SFP1131-1FX90 complies with the following regulatory requirements when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Laser Eye Safety IEC/EN 60825 Class 1 Electrical Safety IEC/EN 60950 Compliant RoHS EU RoHS Directive 2002/95/EC Compliant Ordering Information Article Number 6GK6000-8FE54-0AA0 16 Name RUGGEDCOM SFP1131-1FX90 Description 100Base-FX SFP - SM, 1550 nm, LC, 90 km RUGGEDCOM SFP1131-1FX90 RUGGEDCOM SFP Transceivers Catalog Chapter 4 Active 100 Mbps SFP Transceivers Active 100 Mbps SFP Transceivers The following active 100 Mbps Ethernet SFP transceivers are available from Siemens for select RUGGEDCOM routers and switches. To determine compatibility, refer to Section 1.2, "Available SFP Transceivers". CONTENTS * Section 4.1, "RUGGEDCOM SFP1121-1FX2A" * Section 4.2, "RUGGEDCOM SFP1131-1FX10A" * Section 4.3, "RUGGEDCOM SFP1131S-1FX40A" 17 Chapter 4 RUGGEDCOM SFP Transceivers Active 100 Mbps SFP Transceivers Catalog Section 4.1 RUGGEDCOM SFP1121-1FX2A Siemens' RUGGEDCOM SFP1121-1FX2A industrial grade 100 Mbps fiber optic fast Ethernet SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Fast Ethernet communication up to 2 km (1.2 mi) using multi-mode fiber. NOTE This SFP transceiver is not recommended for use with IEEE 1588. Highlights * Compliant with SFP MSA and IEEE 802.3 for 100Base-FX * Bail latch * Hot swappable * Transmission distance up to 2 km (1.2 mi) * LC duplex connector optical interface * Operates with 50/125 m and 62.5/125 m multimode fiber * RoHS compliant Specifications Optical Characteristics Cabling Transmit Power -20 to -14 dBm Speed 100 Mbps Receiver Sensitivity -31.5 to -8 dBm Mode MM (Multi-Mode) Power Budget 11.5 dB Interface FX Connector LC Cable Type 50/125 or 62.5/125 m Wavelength 1310 nm Nominal Distance 2 km (1.2 mi) Environment Operating Temperature -40 to 85 C (-40 to 185 F) Operating Relative Humidity 5 to 95% (non-condensing) Storage Temperature -40 to 85 C (-40 to 185 F) Regulatory Compliance The RUGGEDCOM SFP1121-1FX2A meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883E, Method 3015.7 Class 1 Electrostatic Discharge (ESD) to the Duplex LC Receptacle IEC 61000-4-2 Compliant Electromagnetic Interference (EMI) FCC Part 15, Class B Compliant Laser Eye Safety US FDA 21CFR 1040.10 and 1040.11 Compliant with Class 1 laser product GR-1089-CORE IEC/EN 60825-1 and 60825-2 18 RUGGEDCOM SFP1121-1FX2A RUGGEDCOM SFP Transceivers Chapter 4 Catalog Active 100 Mbps SFP Transceivers Feature Standard RoHS EU RoHS Directive 2011/65/EU Performance Compliant Ordering Information Article Number 6GK6000-8FE50-0AA0 RUGGEDCOM SFP1121-1FX2A Name RUGGEDCOM SFP1121-1FX2A Description 100Base-FX SFP - MM, 1310 nm, LC, 2 km 19 Chapter 4 RUGGEDCOM SFP Transceivers Active 100 Mbps SFP Transceivers Catalog Section 4.2 RUGGEDCOM SFP1131-1FX10A Siemens' RUGGEDCOMSFP1131-1FX10A industrial grade 100 Mbps fiber optic fast Ethernet SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Fast Ethernet communication up to 10 km (6.2 mi) using single-mode fiber. Highlights * Compliant with SFP MSA for 100Base-FX * Transmission distance up to 10 km (6.2 mi) * Bail latch * Hot swappable * LC duplex fiber connector * RoHS compliant Specifications Optical Characteristics Cabling Transmit Power -15 to -8 dBm Speed 100 Mbps Receiver Sensitivity -31.5 to -8 dBm Interface FX Power Budget 16.5 Mode SM (Single-Mode) Connector LC Cable Type 9/125 m Wavelength 1310 nm Nominal Distance 10 km (6.2 mi) Environment Operating Temperature -40 to 85 C (-40 to 185 F) Operating Relative Humidity 0 to 85% (non-condensing) Storage Temperature -40 to 85 C (-40 to 185 F) Regulatory Compliance The RUGGEDCOM SFP1131-1FX10A complies with the following regulatory requirements when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883E, Method 3015.7 Class 1 Electrostatic Discharge (ESD) to the Duplex LC Receptacle IEC 61000-4-2 Compliant Electromagnetic Interference (EMI) FCC Part 15, Class B Compliant Eye Safety US FDA 21CFR 1040.10 and 1040.11 Compliant with Class 1 laser product GR-1089-CORE IEC/EN 60825-1 and 60825-2 RoHS 20 EU RoHS Directive 2011/65/EU Compliant RUGGEDCOM SFP1131-1FX10A RUGGEDCOM SFP Transceivers Chapter 4 Catalog Active 100 Mbps SFP Transceivers Ordering Information Article Number 6GK6000-8FE60-0AA0 RUGGEDCOM SFP1131-1FX10A Name RUGGEDCOM SFP1131-1FX10A Description 100Base-LX SFP - SM, 1310 nm, LC, 10 km 21 Chapter 4 RUGGEDCOM SFP Transceivers Active 100 Mbps SFP Transceivers Catalog Section 4.3 RUGGEDCOM SFP1131S-1FX40A Siemens' RUGGEDCOMSFP1131S-1FX40A industrial grade 100 Mbps fiber optic fast Ethernet SFP transceiver operates within a wide temperature range (-5 to 70 C or 23 to 158 F) and provides high performance Fast Ethernet communication up to 40 km (24.9 mi) using single-mode fiber. Highlights * Compliant with SFP MSA for 100Base-FX * Transmission distance up to 40 km (24.9 mi) * Bail latch * Hot swappable * LC duplex fiber connector * RoHS compliant Specifications Optical Characteristics Cabling Transmit Power -5 to 0 dBm Speed 100 Mbps Receiver Sensitivity -23 to 0 dBm Interface FX Power Budget 18 Mode SM (Single-Mode) Connector LC Cable Type 9/125 m Wavelength 1310 nm Nominal Distance 40 km (24.9 mi) Environment Operating Temperature -5 to 70 C (23 to 158 F) Operating Relative Humidity 0 to 85% (non-condensing) Storage Temperature -5 to 70 C (23 to 158 F) Regulatory Compliance The RUGGEDCOM SFP1131S-1FX40A complies with the following regulatory requirements when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883E, Method 3015.7 Class 1 Electrostatic Discharge (ESD) to the Duplex LC Receptacle IEC 61000-4-2 Compliant Electromagnetic Interference (EMI) FCC Part 15, Class B Compliant Eye Safety US FDA 21CFR 1040.10 and 1040.11 Compliant with Class 1 laser product GR-1089-CORE IEC/EN 60825-1 and 60825-2 RoHS 22 EU RoHS Directive 2011/65/EU Compliant RUGGEDCOM SFP1131S-1FX40A RUGGEDCOM SFP Transceivers Chapter 4 Catalog Active 100 Mbps SFP Transceivers Ordering Information Article Number 6GK6000-8FE62-0AA0 Name RUGGEDCOM SFP1131S-1FX40A RUGGEDCOM SFP1131S-1FX40A Description 100Base-LX SFP - SM, 1310 nm, LC, 40 km 23 Chapter 4 Active 100 Mbps SFP Transceivers 24 RUGGEDCOM SFP Transceivers Catalog RUGGEDCOM SFP1131S-1FX40A RUGGEDCOM SFP Transceivers Catalog Chapter 5 Gigabit Ethernet SFP Transceivers Gigabit Ethernet SFP Transceivers The following Gigabit Ethernet SFP transceivers are available from Siemens for select RUGGEDCOM routers and switches. To determine compatibility, refer to Section 1.2, "Available SFP Transceivers". CONTENTS * Section 5.1, "RUGGEDCOM SFP1122-1SX" * Section 5.2, "RUGGEDCOM SFP1122-1SX2" * Section 5.3, "RUGGEDCOM SFP1132-1LX10" * Section 5.4, "RUGGEDCOM SFP1132-1LX25" * Section 5.5, "RUGGEDCOM SFP1132-1LX40" * Section 5.6, "RUGGEDCOM SFP1132-1LX70" * Section 5.7, "RUGGEDCOM SFP1132-1LX100" * Section 5.8, "RUGGEDCOM SFP1132-1LX115" 25 Chapter 5 RUGGEDCOM SFP Transceivers Gigabit Ethernet SFP Transceivers Catalog Section 5.1 RUGGEDCOM SFP1122-1SX Siemens' RUGGEDCOM SFP1122-1SX industrial grade 1 Gbps fiber optic SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Gigabit Ethernet communication up to either 0.5 km (0.3 mi) or 0.3 km (0.2 mi) using multi-mode fiber, depending on the cable type in use. Highlights * Compliant with SFP MSA and IEEE 802.3 for 1000Base-SX * Transmission distance up to 0.5 km (0.3 mi) or 0.3 km (0.2 mi) * Bail latch * Hot swappable * RoHS compliant * LC duplex connector optical interface * Operates with 50/125 m and 62.5/125 m multimode fiber Specifications Optical Characteristics Cabling Transmit Power -9 to -2.5 dBm Speed 1 Gbps Receiver Sensitivity -20 to 0 dBm Mode MM (Multi-Mode) Power Budget 11 dB Interface SX Connector LC Cable Type 50/125 or 62.5/125 m Wavelength 850 nm Nominal Distance (50/125 m) 0.5 km (0.3 mi) Nominal Distance (62.5/125 m) 0.3 km (0.2 mi) Environment Operating Temperature -40 to 85 C (-40 to 185 F) Operating Relative Humidity 5 to 95% (non-condensing) Storage Temperature -40 to 100 C (-40 to 212 F) Regulatory Compliance The RUGGEDCOM SFP1122-1SX meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature 26 Standard Performance Laser Eye Safety IEC/EN 60825 Class 1 Electrical Safety IEC/EN 60950 Compliant RoHS EU RoHS Directive 2002/95/EC Compliant RUGGEDCOM SFP1122-1SX RUGGEDCOM SFP Transceivers Chapter 5 Catalog Gigabit Ethernet SFP Transceivers Ordering Information Article Number 6GK6000-8FG51-0AA0 RUGGEDCOM SFP1122-1SX Name RUGGEDCOM SFP1122-1SX Description 1000Base-SX SFP - MM, 850 nm, LC, 0.5 km 27 Chapter 5 RUGGEDCOM SFP Transceivers Gigabit Ethernet SFP Transceivers Catalog Section 5.2 RUGGEDCOM SFP1122-1SX2 Siemens' RUGGEDCOM SFP1122-1SX2 industrial grade 1 Gbps fiber optic SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Gigabit Ethernet communication up to 2 km (1.2 mi) using multi-mode fiber. Highlights * Compliant with SFP MSA and IEEE 802.3z for 1000Base-SX * Transmission distance up to 2 km (1.2 mi) * LC duplex connector optical interface * Operates with 50/125 m and 62.5/125 m multimode fiber Specifications Optical Characteristics * Bail latch * Hot swappable * RoHS compliant Cabling Transmit Power -9 to 1 dBm Speed 1 Gbps Receiver Sensitivity -23 to -3 dBm Mode MM (Multi-Mode) Power Budget 14 dB Interface SX Connector LC Cable Type 50/125 or 62.5/125 m Wavelength 1310 nm Nominal Distance 2 km (1.2 mi) Environment Operating Temperature -40 to 85 C (-40 to 185 F) Operating Relative Humidity 5 to 85% (non-condensing) Storage Temperature -40 to 85 C (-40 to 185 F) Regulatory Compliance The RUGGEDCOM SFP1122-1SX2 meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Laser Eye Safety IEC/EN 60825 Class 1 Electrical Safety IEC/EN 60950 Compliant RoHS EU RoHS Directive 2002/95/EC Compliant Ordering Information Article Number 6GK6000-8FE58-0AA0 28 Name RUGGEDCOM SFP1122-1SX2 Description 1000Base-SX SFP - MM, 1310 nm, LC, 2 km RUGGEDCOM SFP1122-1SX2 RUGGEDCOM SFP Transceivers Chapter 5 Catalog Gigabit Ethernet SFP Transceivers Section 5.3 RUGGEDCOM SFP1132-1LX10 Siemens' RUGGEDCOM SFP1132-1LX10 industrial grade 1 Gbps fiber optic long haul SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Gigabit Ethernet communication up to 10 km (6.2 mi) using single-mode fiber. Highlights * Compliant with SFP MSA and IEEE 802.3 for 1000Base-LX * Compliant with SFF-8472 Digital Diagnostic Monitoring Interface * Transmission distance up to 10 km (6.2 mi) * LC duplex connector optical interface Specifications Optical Characteristics * Bail latch * Hot swappable * RoHS compliant Cabling Transmit Power -9.5 to -3.0 dBm Speed 1 Gbps Receiver Sensitivity -19.0 to -3.0 dBm Mode SM (Single-Mode) Power Budget 9.5 dB Interface LX Connector LC Cable Type 9/125 m Wavelength 1310 nm Nominal Distance 10 km (6.2 mi) Environment Operating Temperature -40 to 85 C (-40 to 185 F) Operating Relative Humidity 5 to 95% (non-condensing) Storage Temperature -40 to 85 C (-40 to 185 F) Regulatory Compliance The RUGGEDCOM SFP1132-1LX10 meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883C, Method 3015.4 Class 2 (> 2000 V) Electrostatic Discharge (ESD) to the Duplex LC Receptacle Bellcore GR1089-CORE Compliant Electromagnetic Interference (EMI) FCC Class B Compliant Immunity Variation of IEC 61000-4-3 Compliant Eye Safety US FDA CDRH AEL Class 1 Compliant JEDEC/EIA JESD22-A114-A IEC/EN 60825-1 and 60825-2 EN 60950 Class 1 RoHS RUGGEDCOM SFP1132-1LX10 EU RoHS Directive 2002/95/EC Compliant 29 Chapter 5 RUGGEDCOM SFP Transceivers Gigabit Ethernet SFP Transceivers Catalog Ordering Information Article Number 6GK6000-8FG52-0AA0 30 Name RUGGEDCOM SFP1132-1LX10 Description 1000Base-LX SFP - SM, 1310 nm, LC, 10 km RUGGEDCOM SFP1132-1LX10 RUGGEDCOM SFP Transceivers Chapter 5 Catalog Gigabit Ethernet SFP Transceivers Section 5.4 RUGGEDCOM SFP1132-1LX25 Siemens' RUGGEDCOM SFP1132-1LX25 industrial grade 1 Gbps fiber optic long haul SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Gigabit Ethernet communication up to 25 km (15.5 mi) using single-mode fiber. Highlights * Compliant with SFP MSA for 1000Base-LX * Compliant with SFF-8472 Digital Diagnostic Monitoring Interface * Bail latch * Hot swappable * Transmission distance up to 25 km (15.5 mi) * LC duplex connector optical interface Specifications Optical Characteristics * RoHS compliant Cabling Transmit Power -7.0 to -3.0 dBm Speed 1 Gbps Receiver Sensitivity -23.0 to -3.0 dBm Mode SM (Single-Mode) Power Budget 16 dB Interface LX Connector LC Cable Type 9/125 m Wavelength 1310 nm Nominal Distance 25 km (15.5 mi) Environment Operating Temperature -40 to 85 C (-40 to 185 F) Storage Temperature -40 to 85 C (-40 to 185 F) Regulatory Compliance The RUGGEDCOM SFP1132-1LX25 meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electromagnetic Interference (EMI) FCC Class B Compliant Eye Safety IEC/EN 60825-1 Compliant RoHS EU RoHS Directive 2002/95/EC Compliant Ordering Information Article Number 6GK6000-8FG53-0AA0 RUGGEDCOM SFP1132-1LX25 Name RUGGEDCOM SFP1132-1LX25 Description 1000Base-LX SFP - SM, 1310 nm, LC, 25 km 31 Chapter 5 RUGGEDCOM SFP Transceivers Gigabit Ethernet SFP Transceivers Catalog Section 5.5 RUGGEDCOM SFP1132-1LX40 Siemens' RUGGEDCOM SFP1132-1LX40 industrial grade 1 Gbps fiber optic long haul SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Gigabit Ethernet communication up to 40 km (24.9 mi) using single-mode fiber. Highlights * Compliant with SFP MSA for 1000Base-LX * Compliant with SFF-8472 Digital Diagnostic Monitoring Interface * Transmission distance up to 40 km (24.9 mi) * LC duplex connector optical interface Specifications Optical Characteristics * Bail latch * Hot swappable * RoHS compliant Cabling Transmit Power -6.0 to 0.0 dBm Speed 1 Gbps Receiver Sensitivity -23.0 to -3.0 dBm Mode SM (Single-Mode) Power Budget 17 dB Interface LX Connector LC Cable Type 9/125 m Wavelength 1550 nm Nominal Distance 40 km (24.9 mi) Environment Operating Temperature -40 to 85 C (-40 to 185 F) Storage Temperature -40 to 85 C (-40 to 185 F) Regulatory Compliance The RUGGEDCOM SFP1132-1LX40 meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electromagnetic Interference (EMI) FCC Class B Compliant Eye Safety IEC/EN 60825-1 Compliant RoHS EU RoHS Directive 2002/95/EC Compliant Ordering Information Article Number 6GK6000-8FG57-0AA0 32 Name RUGGEDCOM SFP1132-1LX40 Description 1000Base-LX SFP - SM, 1550 nm, LC, 40 km RUGGEDCOM SFP1132-1LX40 RUGGEDCOM SFP Transceivers Chapter 5 Catalog Gigabit Ethernet SFP Transceivers Section 5.6 RUGGEDCOM SFP1132-1LX70 Siemens' RUGGEDCOM SFP1132-1LX70 industrial grade 1 Gbps fiber optic long haul SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Gigabit Ethernet communication up to 70 km (43.5 mi) using single-mode fiber. Highlights * Compliant with SFP MSA for 1000Base-LX * Compliant with SFF-8472 Digital Diagnostic Monitoring Interface * Bail latch * Hot swappable * Transmission distance up to 70 km (43.5 mi) * LC duplex connector optical interface Specifications Optical Characteristics * RoHS compliant Cabling Transmit Power -0.0 to 5.0 dBm Speed 1 Gbps Receiver Sensitivity -23.0 to -3.0 dBm Mode SM (Single-Mode) Power Budget 23 dB Interface LX Connector LC Cable Type 9/125 m Wavelength 1550 nm Nominal Distance 70 km (43.5 mi) Environment Operating Temperature -40 to 85 C (-40 to 185 F) Storage Temperature -40 to 85 C (-40 to 185 F) Regulatory Compliance The RUGGEDCOM SFP1132-1LX70 meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electromagnetic Interference (EMI) FCC Class B Compliant Eye Safety IEC/EN 60825-1 Compliant RoHS EU RoHS Directive 2002/95/EC Compliant Ordering Information Article Number 6GK6000-8FG54-0AA0 RUGGEDCOM SFP1132-1LX70 Name RUGGEDCOM SFP1132-1LX70 Description 1000Base-LX SFP - SM, 1550 nm, LC, 70 km 33 Chapter 5 RUGGEDCOM SFP Transceivers Gigabit Ethernet SFP Transceivers Catalog Section 5.7 RUGGEDCOM SFP1132-1LX100 Siemens' RUGGEDCOM SFP1132-1LX100 industrial grade 1 Gbps fiber optic long haul SFP transceiver operates within a wide temperature range (0 to 70 C or 32 to 158 F) and provides high performance Gigabit Ethernet communication up to 100 km (62.1 mi) using single-mode fiber. Highlights * Compliant with SFP MSA and IEE 802.3 for 1000Base-LX * Compliant with SFF-8472 Digital Diagnostic Monitoring Interface * Bail latch * Hot swappable * RoHS compliant * Transmission distance up to 100 km (62.1 mi) * LC duplex connector optical interface Specifications Optical Characteristics Cabling Transmit Power -0.0 to 5.0 dBm Speed 1 Gbps Receiver Sensitivity -30.0 to -8.0 dBm Mode SM (Single-Mode) 30 dB Interface LX Connector LC Cable Type 9/125 m Wavelength 1550 nm Nominal Distance: 100 km (62.1 mi) a Power Budget Environment a Operating Temperature 0 to 70 C (32 to 158 F) Storage Temperature -40 to 85 C (-40 to 185 F) Assumes the same SFP transceiver is used on both ends of the connection. Regulatory Compliance The RUGGEDCOM SFP1132-1LX100 meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electromagnetic Interference (EMI) FCC Class B Compliant Eye Safety IEC/EN 60825-1 Compliant RoHS EU RoHS Directive 2002/95/EC Compliant Ordering Information Article Number 6GK6000-8FG55-0AA0 34 Name RUGGEDCOM SFP1132-1LX100 Description 1000Base-LX SFP - SM, 1550 nm, LC, 100 km RUGGEDCOM SFP1132-1LX100 RUGGEDCOM SFP Transceivers Chapter 5 Catalog Gigabit Ethernet SFP Transceivers Section 5.8 RUGGEDCOM SFP1132-1LX115 Siemens' RUGGEDCOM SFP1132-1LX115 industrial grade 1 Gbps fiber optic long haul SFP transceiver operates within a wide temperature range (-10 to 70 C or 14 to 158 F) and provides high performance Gigabit Ethernet communication up to 115 km (71.5 mi) using single-mode fiber. Highlights * Compliant with SFP MSA for 1000Base-LX * Transmission distance up to 115 km (71.5 mi) * LC duplex fiber connector Specifications Optical Characteristics * Bail latch * Hot swappable * RoHS compliant Cabling Transmit Power 0 to 5 dBm Speed 1 Gbps Receiver Sensitivity -30 to -9 dBm Mode SM (Single-Mode) Receiver Sensitivity 30 dB Interface LX Connector LC Cable Type 9/125 m Wavelength 1550 nm Nominal Distance 115 km (71.5 mi) Environment Operating Temperature -10 to 70 C (14to 158 F) Operating Relative Humidity 0 to 85% (non-condensing) Storage Temperature -40 to 85 C (-40 to 185 F) Regulatory Compliance The RUGGEDCOM SFP1132-1LX115 meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Laser Eye Safety IEC/EN 60825 Class 1 Electrical Safety IEC/EN 60950 Compliant RoHS EU RoHS Directive 2002/95/EC Compliant Ordering Information Article Number 6GK6000-8FE56-0AA0 RUGGEDCOM SFP1132-1LX115 Name RUGGEDCOM SFP1132-1LX115 Description 1000Base-LX SFP - SM, 1550 nm, LC, 115 km 35 Chapter 5 Gigabit Ethernet SFP Transceivers 36 RUGGEDCOM SFP Transceivers Catalog RUGGEDCOM SFP1132-1LX115 RUGGEDCOM SFP Transceivers Catalog Chapter 6 Bidirectional Gigabit Ethernet SFP Transceivers Bidirectional Gigabit Ethernet SFP Transceivers The following Bidrectional (BiDi) SFP transceivers are available from Siemens for select RUGGEDCOM routers and switches. To determine compatibility, refer to Section 1.2, "Available SFP Transceivers". CONTENTS * Section 6.1, "RUGGEDCOM SFP1132-1BX10R" * Section 6.2, "RUGGEDCOM SFP1132-1BX10T" * Section 6.3, "RUGGEDCOM SFP1132-1BX40R" * Section 6.4, "RUGGEDCOM SFP1132-1BX40T" 37 Chapter 6 RUGGEDCOM SFP Transceivers Bidirectional Gigabit Ethernet SFP Transceivers Catalog Section 6.1 RUGGEDCOM SFP1132-1BX10R Siemens' RUGGEDCOM SFP1132-1BX10R industrial grade 1 Gbps fiber optic bi-directional SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Gigabit Ethernet communication up to 10 km (6.2 mi) using single-mode fiber. Highlights * Compliant with SFP MSA for 1000BASE-BX10-U * Compliant with SFF-8472 Digital Diagnostic Monitoring Interface * Transmission distance up to 10 km (6.2 mi) * LC duplex fiber connector * Bail latch * Hot swappable * RoHS compliant Specifications Optical Characteristics Cabling Transmit Power -9.0 to -3.0 dBm Speed 1000 Mbit/s Receiver Sensitivity -19.5 to -3.0 dBm Mode SM 10.5 db Interface BX Connector LC Cable Type (m) 9/125 Wavelength (Tx) 1310 nm Wavelength (Rx) 1490 nm Nominal Distance 10 km (6.2 mi) a Power Budget Environment a Operating Temperature -40 to 85 C (-40 to 185 F) Operating Relative Humidity 5 to 95% (non-condensing) Storage Temperature -40 to 85 C (-40 to 185 F) Assumes an SFP1132-1BX10T is used at the other end of the connection. Regulatory Compliance The RUGGEDCOM SFP1132-1BX10R meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883E, Method 3015.7 Class 1 Electrostatic Discharge (ESD) to the Duplex LC Receptacle IEC 61000-4-2 Compliant Electromagnetic Interference (EMI) FCC Part 15, Class B Compliant Laser Eye Safety US FDA 21CRF 1040.10 and 1040.11 Compliant with Class 1 laser product IEC/EN 60825-1 and 60825-2 EN 60950 RoHS 38 EU RoHS Directive 2011/65/EU Compliant RUGGEDCOM SFP1132-1BX10R RUGGEDCOM SFP Transceivers Chapter 6 Catalog Bidirectional Gigabit Ethernet SFP Transceivers Ordering Information Article Number 6GK6000-8FB51-0AA0 RUGGEDCOM SFP1132-1BX10R Name RUGGEDCOM SFP1132-1BX10R Description 1000Base-BX SFP - SM, 1310/1490 nm, LC, 10 km 39 Chapter 6 RUGGEDCOM SFP Transceivers Bidirectional Gigabit Ethernet SFP Transceivers Catalog Section 6.2 RUGGEDCOM SFP1132-1BX10T Siemens' RUGGEDCOM SFP1132-1BX10T industrial grade 1 Gbps fiber optic bi-directional SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Gigabit Ethernet communication up to 10 km (6.2 mi) using single-mode fiber. Highlights * Compliant with SFP MSA for 1000BASE-BX10-D * Compliant with SFF-8472 Digital Diagnostic Monitoring Interface * Transmission distance up to 10 km (6.2 mi) * LC duplex fiber connector * Bail latch * Hot swappable * RoHS compliant Specifications Optical Characteristics Cabling Transmit Power -9.0 to -3.0 dBm Speed 1 Gbps Receiver Sensitivity -19.5 to -3.0 dBm Mode SM (Single-Mode) 10.5 dB Interface BX Connector LC Cable Type 9/125 m Wavelength (Tx) 1490 nm Wavelength (Rx) 1310 nm Nominal Distance 10 km (6.2 mi) b Power Budget Environment b Operating Temperature -40 to 85 C (-40 to 185 F) Operating Relative Humidity 5 to 95% (non-condensing) Storage Temperature -40 to 85 C (-40 to 185 F) Assumes an SFP1132-1BX10R is used at the other end of the connection. Regulatory Compliance The RUGGEDCOM SFP1132-1BX10T meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883E, Method 3015.7 Class 1 Electrostatic Discharge (ESD) to the Duplex LC Receptacle IEC 61000-4-2 Compliant Electromagnetic Interference (EMI) FCC Part 15, Class B Compliant Laser Eye Safety US FDA 21CRF 1040.10 and 1040.11 Compliant with Class 1 laser product IEC/EN 60825-1 and 60825-2 EN 60950 RoHS 40 EU RoHS Directive 2011/65/EU Compliant RUGGEDCOM SFP1132-1BX10T RUGGEDCOM SFP Transceivers Chapter 6 Catalog Bidirectional Gigabit Ethernet SFP Transceivers Ordering Information Article Number 6GK6000-8FB52-0AA0 RUGGEDCOM SFP1132-1BX10T Name RUGGEDCOM SFP1132-1BX10T Description 1000Base-BX SFP - SM, 1490/1310 nm, LC, 10 km 41 Chapter 6 RUGGEDCOM SFP Transceivers Bidirectional Gigabit Ethernet SFP Transceivers Catalog Section 6.3 RUGGEDCOM SFP1132-1BX40R Siemens' RUGGEDCOM SFP1132-1BX40R industrial grade 1 Gbps fiber optic bi-directional SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Gigabit Ethernet communication up to 40 km (24.9 mi) using single-mode fiber. Highlights * Compliant with SFP MSA and IEEE 802.3ah for 1000Base-BX40-U * Bail latch * Hot swappable * Compliant with SFF-8472 Digital Diagnostic Monitoring Interface * RoHS compliant * Transmission distance up to 40 km (24.9 mi) * LC duplex fiber connector Specifications Optical Characteristics Cabling Transmit Power -2.0 to 3.0 dBm Speed 1 Gbps Receiver Sensitivity -23.0 to -3.0 dBm Mode SM (Single-Mode) 21 dB Interface BX Connector LC Cable Type 9/125 m Wavelength (Tx) 1310 nm Wavelength (Rx) 1490 nm Nominal Distance 40 km (24.9 mi) c Power Budget Environment c Operating Temperature -40 to 85 C (-40 to 185 F) Operating Relative Humidity 5 to 95% (non-condensing) Storage Temperature -40 to 85 C (-40 to 185 F) Assumes an SFP1132-1BX40T is used at the other end of the connection. Regulatory Compliance The RUGGEDCOM SFP1132-1BX40R meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883E, Method 3015.7 Class 1 Electrostatic Discharge (ESD) to the Duplex LC Receptacle IEC 61000-4-2 Compliant Electromagnetic Interference (EMI) FCC Part 15, Class B Compliant Immunity Variation of IEC 61000-4-3 Compliant Laser Eye Safety US FDA 21CRF 1040.10 and 1040.11 Compliant with Class 1 laser product IEC/EN 60825-1 and 60825-2 42 RUGGEDCOM SFP1132-1BX40R RUGGEDCOM SFP Transceivers Chapter 6 Catalog Bidirectional Gigabit Ethernet SFP Transceivers Feature Standard Performance EN 60950 RoHS EU RoHS Directive 2011/65/EU Compliant Ordering Information Article Number 6GK6000-8FB53-0AA0 RUGGEDCOM SFP1132-1BX40R Name RUGGEDCOM SFP1132-1BX40R Description 1000Base-BX SFP - SM, 1310/1490 nm, LC, 40 km 43 Chapter 6 RUGGEDCOM SFP Transceivers Bidirectional Gigabit Ethernet SFP Transceivers Catalog Section 6.4 RUGGEDCOM SFP1132-1BX40T Siemens' RUGGEDCOM SFP1132-1BX40T industrial grade 1 Gbps fiber optic bi-directional SFP transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Gigabit Ethernet communication up to 40 km (24.9 mi) using single-mode fiber. Highlights * Compliant with SFP MSA and IEEE 802.3ah for 1000Base-BX-D * Bail latch * Hot swappable * Compliant with SFF-8472 Digital Diagnostic Monitoring Interface * RoHS compliant * Transmission distance up to 40 km (24.9 mi) * LC duplex fiber connector Specifications Optical Characteristics Cabling Transmit Power -2.0 to 3.0 dBm Speed 1 Gbps Receiver Sensitivity -23.0 to -3.0 dBm Mode SM (Single-Mode) 21 dB Interface BX Connector LC Cable Type 9/125 m Wavelength (Tx) 1490 nm Wavelength (Rx) 1310 nm Nominal Distance 40 km (24.9 mi) d Power Budget Environment d Operating Temperature -40 to 85 C (-40 to 185 F) Operating Relative Humidity 5 to 95% (non-condensing) Storage Temperature -40 to 85 C (-40 to 185 F) Assumes an SFP1132-1BX40R is used at the other end of the connection. Regulatory Compliance The RUGGEDCOM SFP1132-1BX40T meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883E, Method 3015.7 Class 1 Electrostatic Discharge (ESD) to the Duplex LC Receptacle IEC 61000-4-2 Compliant Electromagnetic Interference (EMI) FCC Part 15, Class B Compliant Immunity Variation of IEC 61000-4-3 Compliant Laser Eye Safety US FDA 21CRF 1040.10 and 1040.11 Compliant with Class 1 laser product IEC/EN 60825-1 and 60825-2 44 RUGGEDCOM SFP1132-1BX40T RUGGEDCOM SFP Transceivers Chapter 6 Catalog Bidirectional Gigabit Ethernet SFP Transceivers Feature Standard Performance EN 60950 RoHS EU RoHS Directive 2011/65/EU Compliant Ordering Information Article Number 6GK6000-8FB54-0AA0 RUGGEDCOM SFP1132-1BX40T Name RUGGEDCOM SFP1132-1BX40T Description 1000Base-BX SFP - SM, 1490/1310 nm, LC, 40 km 45 Chapter 6 Bidirectional Gigabit Ethernet SFP Transceivers 46 RUGGEDCOM SFP Transceivers Catalog RUGGEDCOM SFP1132-1BX40T RUGGEDCOM SFP Transceivers Catalog Chapter 7 10-Gigabit Ethernet SFP+ Transceivers 10-Gigabit Ethernet SFP+ Transceivers The following 10-Gigabit Ethernet SFP+ transceivers are available from Siemens for select RUGGEDCOM routers and switches. To determine compatibility, refer to Section 1.2, "Available SFP Transceivers". CONTENTS * Section 7.1, "RUGGEDCOM SFP2123-1SR" * Section 7.2, "RUGGEDCOM SFP2133-1LR10" * Section 7.3, "RUGGEDCOM SFP2133-1ER40" * Section 7.4, "RUGGEDCOM SFP2133-1ZR80" 47 Chapter 7 RUGGEDCOM SFP Transceivers 10-Gigabit Ethernet SFP+ Transceivers Catalog Section 7.1 RUGGEDCOM SFP2123-1SR Siemens' RUGGEDCOM SFP2123-1SR industrial grade 10 Gbps fiber optic long reach SFP+ transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Gigabit Ethernet communication up to 400 m (1312 ft) using multi-mode fiber. Highlights * Compliant with SFP+ MSA and IEEE 802.3ae for 10GBase-SR * Compliant with SFF-8431 (Rev 2) * Compliant with SFF-8432 (Rev 4.3) * Transmission distance up to 400 m (1312 ft) Specifications Optical Characteristics * LC duplex connector optical interface * Bail latch * Hot swappable * RoHS compliant Cabling Transmit Power -5.0 to -1.0 dBm Speed 10 Gbps Tx Typical OMA -1.5 Mode MM (Multi-Mode) Minimum Extinction Ratio 3.0 Interface SR Rx Sensitivity OMA (dBm) -11.1 Connector LC Stressed RX Sensitivity (dBm) -7.5 Cable Type 50/125 or 62.5/125 m Rx Saturation (dBm) 0.5 Wavelength 850 nm Nominal Distance 400 m (1312 ft) Environment Operating Temperature -40 to 85 C (-40 to 185 F) Operating Relative Humidity 0 to 85% (non-condensing) Storage Temperature -40 to 85 C (-40 to 185 F) Regulatory Compliance The RUGGEDCOM SFP2123-1SR meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electromagnetic Interference (EMI) FCC Class B Compliant Eye Safety US FDA 21CRF 1040.10 and 1040.11 Class 1 IEC/EN 60825-1 RoHS 48 EU RoHS Directive 2002/95/EC Compliant RUGGEDCOM SFP2123-1SR RUGGEDCOM SFP Transceivers Chapter 7 Catalog 10-Gigabit Ethernet SFP+ Transceivers Ordering Information Article Number 6GK6000-8FT50-0AA0 RUGGEDCOM SFP2123-1SR Name RUGGEDCOM SFP2123-1SR Description 10GBase-SR SFP - SM, 850 nm, LC, 400 m 49 Chapter 7 RUGGEDCOM SFP Transceivers 10-Gigabit Ethernet SFP+ Transceivers Catalog Section 7.2 RUGGEDCOM SFP2133-1LR10 Siemens' RUGGEDCOM SFP2133-1LR10 industrial grade 10 Gbps fiber optic long reach SFP+ transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Gigabit Ethernet communication up to 10 km (6.2 mi) using single-mode fiber. Highlights * Compliant with SFP+ MSA and IEEE 802.3ae for 10GBase-LR/LW * LC duplex connector optical interface * Bail latch * Compliant with SFF-8431 (Rev 2) * Compliant with SFF-8432 (Rev 4.3) * Transmission distance up to 10 km (6.2 mi) Specifications Optical Characteristics * Hot swappable * RoHS compliant Cabling Transmit Power -8.2 to 0.5 dBm Speed 10 Gbps Tx Minimum OMA -5.2 Mode SM (Single-Mode) Minimum Extinction Ratio 3.5 Interface LR Rx Sensitivity OMA (dBm) -12.6 Connector LC Stressed RX Sensitivity (dBm) -10.3 Cable Type 9/125 m Rx Saturation (dBm) 0.5 Wavelength 1310 nm Power Budget (dB) 4.4 Nominal Distance 10 km (6.2 mi) Channel Insertion Loss (dB) 5.1 Allocation for Penalties (dB) 2.3 Environment Operating Temperature -40 to 85 C (-40 to 185 F) Operating Relative Humidity 0 to 85% (non-condensing) Storage Temperature -40 to 85 C (-40 to 185 F) Product-Specific Deviations The RUGGEDCOM SFP2133-1LR10 supports the following ratings when installed in the specified Siemens RUGGEDCOM routers and/or switches: Product(s) 50 Specification Rating RUGGEDCOM RX5000 Operating Temperature -40 to 80 C (-40 to 176 F) RUGGEDCOM MX5000 Operating Temperature -40 to 80 C (-40 to 176 F) RUGGEDCOM SFP2133-1LR10 RUGGEDCOM SFP Transceivers Chapter 7 Catalog 10-Gigabit Ethernet SFP+ Transceivers Regulatory Compliance The RUGGEDCOM SFP2133-1LR10 meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard Performance Electromagnetic Interference (EMI) FCC Class B Compliant Eye Safety US FDA 21CRF 1040.10 and 1040.11 Class 1 IEC/EN 60825-1 RoHS EU RoHS Directive 2002/95/EC Compliant Ordering Information Article Number 6GK6000-8FT51-0AA0 RUGGEDCOM SFP2133-1LR10 Name RUGGEDCOM SFP2133-1LR10 Description 10GBase-LR SFP - SM, 1310 nm, LC, 10 km 51 Chapter 7 RUGGEDCOM SFP Transceivers 10-Gigabit Ethernet SFP+ Transceivers Catalog Section 7.3 RUGGEDCOM SFP2133-1ER40 Siemens' RUGGEDCOM SFP2133-1ER40 industrial grade 10 Gbps fiber optic extended reach SFP+ transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Gigabit Ethernet communication up to 40 km (24.9 mi) using single-mode fiber. Highlights * Compliant with SFP+ MSA and IEEE 802.3ae for 10GBase-ER/EW * Compliant with SFF-8431 (Rev 2) * Compliant with SFF-8432 (Rev 4.3) * Compliant with SFF-8472 Digital Diagnostic Monitoring Interface (Rev 10.4) * Transmission distance up to 40 km (24.9 mi) Specifications Optical Characteristics * LC duplex connector optical interface * Bail latch * Hot swappable * RoHS compliant Cabling Transmit Power -4.4 to 4.0 dBm Speed 10 Gbps Tx Minimum OMA -1.7 Mode SM (Single-Mode) Minimum Extinction Ratio 8.2 Interface ER Rx Sensitivity OMA (dBm) -14.1 Connector LC Stressed RX Sensitivity (dBm) -11.3 Cable Type 9/125 m Rx Saturation (dBm) -1.0 Wavelength 1550 nm Power Budget (dB) 9.4 Nominal Distance 40 km (24.9 mi) Channel Insertion Loss (dB) 10.9 Allocation for Penalties (dB) 4.1 Environment Operating Temperature -40 to 85 C (-40 to 185 F) Storage Temperature -40 to 85 C (-40 to 185 F) Regulatory Compliance The RUGGEDCOM SFP2133-1ER40 meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature RoHS 52 Standard EU RoHS Directive 2002/95/EC Performance Compliant RUGGEDCOM SFP2133-1ER40 RUGGEDCOM SFP Transceivers Chapter 7 Catalog 10-Gigabit Ethernet SFP+ Transceivers Ordering Information Article Number 6GK6000-8FT53-0AA0 RUGGEDCOM SFP2133-1ER40 Name RUGGEDCOM SFP2133-1ER40 Description 10GBase-ER SFP - SM, 1550 nm, LC, 40 km 53 Chapter 7 RUGGEDCOM SFP Transceivers 10-Gigabit Ethernet SFP+ Transceivers Catalog Section 7.4 RUGGEDCOM SFP2133-1ZR80 Siemens' RUGGEDCOM SFP2133-1ZR80 industrial grade 10 Gbps fiber optic extended reach SFP+ transceiver operates within a wide temperature range (-40 to 85 C or -40 to 185 F) and provides high performance Gigabit Ethernet communication up to 80 km (49.7 mi) using single-mode fiber. Highlights * Compliant with SFP+ MSA and OC-192/STM-64 for 10GBase-ZR/ZW * Compliant with SFF-8431 (Rev 2) * Compliant with SFF-8432 (Rev 4.3) * Compliant with SFF-8472 Digital Diagnostic Monitoring Interface (Rev 10.4) * Transmission distance up to 80 km (49.7 mi) Specifications Optical Characteristics * LC duplex connector optical interface * Bail latch * Hot swappable * RoHS compliant Cabling Transmit Power -1.0 to 4.0 dBm Speed 10 Gbps Minimum Extinction Ratio 9.0 Mode SM (Single-Mode) Rx Sensitivity OMA (dBm) -23.0 Interface ZR Rx Saturation (dBm) -7.0 Connector LC Power Budget (dB) 22.0 Cable Type 9/125 m Wavelength 1550 nm Nominal Distance 80 km (49.7 mi) Environment Operating Temperature -40 to 85 C (-40 to 185 F) Storage Temperature -40 to 85 C (-40 to 185 F) Regulatory Compliance The RUGGEDCOM SFP2133-1ZR80 meets the following standards when installed in Siemens RUGGEDCOM routers and/or switches: Feature Standard RoHS EU RoHS Directive 2002/95/EC Performance Compliant Ordering Information Article Number 6GK6000-8FT52-0AA0 54 Name RUGGEDCOM SFP2133-1ZR80 Description 10GBase-ZR SFP - SM, 1550 nm, LC, 80 km RUGGEDCOM SFP2133-1ZR80 RUGGEDCOM SFP Transceivers Catalog Chapter 8 Installation/Removal Installation/Removal All SFP transceivers are hot swappable, making it possible to install or remove them while the router/switch is in operation. IMPORTANT! SFP transceivers can only be hot swapped with SFPs supported by the router/switch. To determine compatibility, refer to Section 1.2, "Available SFP Transceivers". CONTENTS * Section 8.1, "Handling SFP Transceivers" * Section 8.2, "Required Tools" * Section 8.3, "Installation" * Section 8.4, "Removal" 55 Chapter 8 RUGGEDCOM SFP Transceivers Installation/Removal Catalog Section 8.1 Handling SFP Transceivers Before handling an SFP transceiver, note the following: WARNING! Radiation hazard - risk of serious personal injury. SFP transceivers are equipped with a Class 1 laser. When installed, each SFP emits invisible radiation even when a cable is not connected. Avoid exposure to laser radiation and do not stare into open SFP ports. CAUTION! Electrical hazard - risk of damage to equipment. Use only components certified by Siemens with RUGGEDCOM products. Damage to the router/switch may occur if compatibility and reliability have not been properly assessed. CAUTION! Static electricity hazard - risk of damage to equipment. SFP transceivers are sensitive to static electricity. An electrostatic discharge (ESD) can cause serious damage to the component once it is outside the chassis. Make sure to wear an ESD-preventive wrist strap connected to the chassis to prevent an electrostatic discharge (ESD). CAUTION! Dirt/debris hazard - risk of damage to equipment. SFP transceivers and sockets are sensitive to the ingress of dirt/debris. Always install a dust plug in both the SFP transceiver and the socket on the router/switch after removing the SFP. Do not remove the plugs until inserting the SFP. CAUTION! Mechanical hazard - risk of damage to equipment. Do not install/remove SFP transceivers more than necessary. Repeated installation/removal can reduce the life of the transceiver. IMPORTANT! Only permit trained and qualified personnel to install and remove SFP transceivers. 56 Handling SFP Transceivers RUGGEDCOM SFP Transceivers Catalog Chapter 8 Installation/Removal Section 8.2 Required Tools The following tools are required for installing/removing SFP transceivers: * An ESD-preventive wrist trap or other personal grounding device * An anti-static mat or foam to set the transceiver on Required Tools 57 Chapter 8 RUGGEDCOM SFP Transceivers Installation/Removal Catalog Section 8.3 Installation To install an SFP transceiver, do the following: WARNING! Explosion hazard - risk of serious personal injury and/or equipment damage. Do not install or remove SFP transceivers when an explosive atmosphere is present. IMPORTANT! Only install SFP transceivers that are compatible with the RUGGEDCOM router/switch. For information about which RUGGEDCOM routers/switches are compatible with an SFP transceiver, refer to Section 1.2, "Available SFP Transceivers". 1. Make sure all potential electrostatic build-up has been properly discharged to prevent an electrostatic discharge (ESD). This can be accomplished by wearing an ESD-preventive wrist trap connected to either the chassis ground connector or a bare metal surface on the router/switch. 2. Remove the SFP transceiver from its packaging. CAUTION! Mechanical hazard - risk of component damage. SFP transceivers are designed to insert in only one orientation. Do not force the SFP transceiver into the socket. 3. Remove the dust plug from the socket and store for future use. 4. Insert the SFP transceiver into the socket, and then swing the bail-latch on the SFP transceiver up and push it in to lock the transceiver in place. 1 2 Figure 1: Installing an SFP Transceiver (Typical) 1. SFP Transceiver 2. Bail-Latch IMPORTANT! Only remove the dust plug when ready to connect a cable to the SFP transceiver. 58 5. Remove the dust plug from the SFP transceiver and store for future use. 6. Remove the dust cap from the cable and immediately connect it to the SFP transceiver. 7. Connect the cable to a network and observe the LED associated with the SFP transceiver. State Description Green (Solid) Link established Green (Blinking) Link activity Installation RUGGEDCOM SFP Transceivers Chapter 8 Catalog Installation Installation/Removal State Description Off No link detected 59 Chapter 8 RUGGEDCOM SFP Transceivers Installation/Removal Catalog Section 8.4 Removal To remove an SFP transceiver, do the following: WARNING! Explosion hazard - risk of serious personal injury and/or equipment damage. Do not install or remove SFP transceivers when an explosive atmosphere is present. 1. Make sure all potential electrostatic build-up has been properly discharged to prevent an electrostatic discharge (ESD). This can be accomplished by wearing an ESD-preventive wrist trap connected to either the chassis ground connector or a bare metal surface on the router/switch. 2. Disconnect the cable from the SFP transceiver and install the dust cap to the cable end. 3. Pull the bail-latch out and down on the SFP transceiver, and then immediately insert a dust plug into the SFP transceiver port. 4. Remove the transceiver from the socket and then immediately insert a dust plug into the socket. 1 2 Figure 2: Removing an SFP Transceiver (Typical) 1. SFP Transceiver 2. Bail-Latch NOTE Refer to the specifications for the specific SFP transceiver to determine the required storage temperature range. 60 5. Store the SFP port in an ESD-safe bag or other suitable ESD-safe environment, free from moisture and stored at the proper temperature. 6. Insert a dust plug into the socket opening to prevent the ingress of dust and dirt. Removal