MKP1848 DC-Link www.vishay.com Vishay Roederstein Metallized Polypropylene Film Capacitors DC-Link Capacitor FEATURES * * * * * * * High performance DC filter Low ESR High peak current capabilities High RMS current capabilities AEC-Q200 qualified Mounting: Radial Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS * * * * * High performance DC filtering HEV/EV: i.e. power train and OBC Renewable energies inverters Motor drives Power supplies QUICK REFERENCE DATA Rated capacitance range 1 F to 400 F Capacitance tolerance 5% 450 V to 1200 V Rated voltage range, UNDC Climatic testing class 40/105/56 Rated temperature 85 C Maximum permissible case temperature 105 C, observing voltage derating Maximum applicable peak to peak ripple voltage 0.2 x UNDC Reference standards IEC 61071, IEC 60068 Dielectric Polypropylene film Electrodes Metallized dielectric capacitor Construction Mono construction Encapsulation Plastic case, sealed with resin; flame retardant Terminals Tinned wires Self inductance (LS) < 1 nH per mm of lead spacing Withstanding DC voltage between terminals (1) 1.5 UNDC for 10 s, cut off current 10 mA, rise time 1000 V/s Insulation resistance RC between leads, after 1 min > 10 000 s For UNDC 500 V measuring voltage 100 V For UNDC > 500 V measuring voltage 500 V Life time expectancy Useful life time: > 100 000 h at UNDC and 70 C FIT: < 10 x 10-9/h (10 per 109 component h) at 0.5 x UNDC, 40 C Marking C-value; tolerance; rated voltage; code for dielectric material; code for manufacturing origin; manufacturer's type designation; manufacturer's logo; year and week of manufacture Notes * For more detailed data and test requirements, contact dc-film@vishay.com * For general information like characteristics and definitions used for film capacitors follow the link: www.vishay.com/doc?28147 (1) See document "Voltage Proof Test for Metalized Film Capacitors" (www.vishay.com/doc?28169) DC VOLTAGE RATINGS UNDC at 85 C 450 V 700 V 800 V 900 V 1100 V 1200 V UOPDC at 70 C 500 V 800 V 900 V 1100 V 1350 V 1500 V UOPDC at 105 C 300 V 500 V 570 V 650 V 800 V 850 V Revision: 13-Nov-12 Document Number: 28164 1 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein COMPOSITION OF CATALOG NUMBER CAPACITANCE (numerically) MULTIPLIER (nF) 10 4 100 5 512 1200 nF 1.2 F P1 (mm) PITCH CODE 1000 6 612 12 000 nF 12 F 27.5 K 10 000 7 712 120 000 nF 120 F 37.5 P 52.5 Y MKP 1848 Example: 6 12 09 4 P 4 TYPE CONSTRUCTION METALLIZED POLYPROPYLENE SPECIAL CODE FOR TERMINAL TOLERANCE 2 2 pins 4 4 4 pins P2 = 10.2 mm UN = 70 = 700 VDC 5 4 pins P2 = 20.3 mm UN = 08 = 800 VDC (1) Customized VOLTAGE UN = 45 = 450 VDC 5% UN = 09 = 900 VDC UN = 91 = 1100 VDC UN = 92 = 1200 VDC Note (1) Tabs terminals or customized terminals are available on request DIMENSIONS in millimeters 2 PINS w I h P1 6-1 O dt P1 0.4 - PCM 27.5 mm P1 0.5 - PCM 37.5 mm 4 PINS w I Marking P2 P2 h P1 6-2 O dt P1 0.5 Revision: 13-Nov-12 P2 0.5 Document Number: 28164 2 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein DIMENSIONS in millimeters 6 PINS w I Marking P2 h P2 lt P1 P1 O dt P2 2 x P2 12 PINS w I Marking P1 h P2 lt P1 O dt 2 x P2 3 x P2 P2 2 x P2 4 x P2 3 x P2 5 x P2 4 x P2 5 x P2 Note * O dt 10 % of standard diameter specified ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 C (F) (V) DIMENSION (5) (mm) P1 (mm) P2 (mm) dV/dt IPEAK (V/s) (A) IRMS (2) (A) ESR (3) (m) tan 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS w h l 1 9.0 19.0 32.0 27.5 - 75 75 2.5 - 54 - 85 - MKP1848510454K2 2 9.0 19.0 32.0 27.5 - 75 150 3 - 34.5 - 85 - MKP1848520454K2 3 11.0 21.0 32.0 27.5 - 75 225 4 - 23.0 - 85 - MKP1848530454K2 4 11.0 21.0 32.0 27.5 - 75 300 4 - 20.5 - 85 - MKP1848540454K2 5 13.0 23.0 32.0 27.5 - 75 375 5 - 16.5 - 85 - MKP1848550454K2 6 15.0 25.0 32.0 27.5 - 75 450 6 - 13.5 - 85 - MKP1848560454K2 7 15.0 25.0 32.0 27.5 - 75 525 6.5 - 11.5 - 85 - MKP1848570454K2 8 18.0 28.0 32.0 27.5 - 75 600 8.5 - 8.5 - 85 - MKP1848580454K2 9 18.0 28.0 32.0 27.5 - 75 675 8.5 - 9.0 - 85 - MKP1848590454K2 10 18.0 28.0 32.0 27.5 - 75 750 9 - 8.0 - 85 - MKP1848610454K2 UOPDC AT 70 C = 500 V, UOPDC AT 105 C = 300 V 450 12 21.0 31.0 32.0 27.5 - 75 900 10 - 7.0 - 85 - MKP1848612454K2 15 20.0 35.0 32.0 27.5 - 75 1125 11.5 - 6.0 - 85 - MKP1848615454K2 10 18.5 35.5 43.0 37.5 10.2 40 400 7.5 8 13.5 12.0 160 140 MKP1848610454P* Revision: 13-Nov-12 Document Number: 28164 3 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 C (F) (V) DIMENSION (5) (mm) P1 (mm) P2 (mm) dV/dt IPEAK (V/s) (A) IRMS (2) (A) ESR (3) (m) tan 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS w h l 12 18.5 35.5 43.0 37.5 10.2 40 480 15 18.5 35.5 43.0 37.5 10.2 40 600 9 10 9.0 8.0 160 140 MKP1848615454P* 20 21.5 38.5 43.0 37.5 10.2 40 800 11 12 7.0 6.0 160 140 MKP1848620454P* 22 21.5 38.5 43.0 37.5 10.2 40 880 11 11.5 7.5 6.5 160 140 MKP1848622454P* 25 21.5 38.5 43.0 37.5 10.2 40 1000 11.5 12.5 6.5 5.5 160 140 MKP1848625454P* 30 24.0 44.0 42.0 37.5 10.2 40 1200 13.5 15 5.5 4.5 160 140 MKP1848630454P* 35 30.0 45.0 42.0 37.5 10.2/20.3 40 1400 17 18.5 4.0 3.5 160 140 MKP1848635454P* 40 30.0 45.0 42.0 37.5 10.2/20.3 40 1600 17 18.5 4.0 3.5 160 140 MKP1848640454P* 40 25.0 45.0 57.5 52.5 10.2 20 800 13 13.5 6.5 6.0 310 280 MKP1848640454Y* 45 25.0 45.0 57.5 52.5 10.2 20 900 12.5 13.5 7.0 6.0 310 280 MKP1848645454Y* 50 30.0 45.0 57.5 52.5 20.3 20 1000 15 15.5 5.5 5.0 310 280 MKP1848650454Y* 55 30.0 45.0 57.5 52.5 20.3 20 1100 15 15.5 5.5 5.0 310 280 MKP1848655454Y* 60 30.0 45.0 57.5 52.5 20.3 20 1200 15.5 16.5 5.0 4.5 310 280 MKP1848660454Y* 65 35.0 50.0 57.5 52.5 20.3 20 1300 19 20.5 4.0 3.5 310 280 MKP1848665454Y* 70 35.0 50.0 57.5 52.5 20.3 20 1400 18 19 4.5 4.0 310 280 MKP1848670454Y* 75 35.0 50.0 57.5 52.5 20.3 20 1500 19 20.5 4.0 3.5 310 280 MKP1848675454Y* 80 35.0 50.0 57.5 52.5 20.3 20 1600 19 20.5 4.0 3.5 310 280 MKP1848680454Y* 90 45.0 45.0 57.5 52.5 20.3 20 1800 - 21.5 - 3.0 - 280 MKP1848690454Y5 95 45.0 45.0 57.5 52.5 20.3 20 1900 - 21.5 - 3.0 - 280 MKP1848695454Y5 100 45.0 45.0 57.5 52.5 20.3 20 2000 - 23.5 - 2.5 - 280 MKP1848710454Y5 200 70.0 65.0 57.5 52.5 20.3 20 2000 - 30.5 - 2.0 - 310 MKP1848720454Y5 (6) 400 130 65.0 57.5 52.5 20.3 10 4000 - 50.5 - 1.5 - 380 MKP1848740454Y5 (7) 1 9 19 32 27.5 - 75 75 2.5 - 54 - 68 - MKP1848510704K2 2 9 19 32 27.5 - 75 150 3 - 34.5 - 68 - MKP1848520704K2 3 11 21 32 27.5 - 75 225 4 - 23 - 68 - MKP1848530704K2 4 13 23 32 27.5 - 75 300 5 - 17 - 68 - MKP1848540704K2 5 15 25 32 27.5 - 75 375 6 - 14 - 68 - MKP1848550704K2 6 18 28 32 27.5 - 75 450 7.5 - 11.5 - 68 - MKP1848560704K2 7 18 28 32 27.5 - 75 525 8 - 10 - 68 - MKP1848570704K2 8 18 28 32 27.5 - 75 600 8.5 - 8.5 - 68 - MKP1848580704K2 9 21 31 32 27.5 - 75 675 10 - 7.5 - 68 - MKP1848590704K2 10 21 31 32 27.5 - 75 750 10 - 7 - 68 - MKP1848610704K2 UOPDC AT 70 C = 500 V, UOPDC AT 105 C = 300 V 450 8 8.5 11.5 10.0 160 140 MKP1848612454P* UOPDC AT 70 C = 800 V, UOPDC AT 105 C = 500 V 700 12 20 35 32 27.5 - 75 900 11.5 - 6 - 68 - MKP1848612704K2 10 18.5 35.5 43 37.5 10.2 40 400 7.5 8 13.5 12 135 120 MKP1848610704P* 12 18.5 35.5 43 37.5 10.2 40 480 8 8.5 11.5 10 135 120 MKP1848612704P* 15 18.5 35.5 43 37.5 10.2 40 600 9 10 9 8 135 120 MKP1848615704P* 20 21.5 38.5 43 37.5 10.2 40 800 11 12 7 6 135 120 MKP1848620704P* 22 24 44 42 37.5 10.2 40 880 13 13.5 6 5.5 135 120 MKP1848622704P* 25 24 44 42 37.5 10.2 40 1000 13.5 14.5 5.5 5 135 120 MKP1848625704P* 30 30 45 42 37.5 10.2/20.3 40 1200 16 17 4.5 4 135 120 MKP1848630704P* Revision: 13-Nov-12 Document Number: 28164 4 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 C (F) (V) DIMENSION (5) (mm) w h P1 (mm) P2 (mm) dV/dt IPEAK (V/s) (A) l IRMS (2) (A) ESR (3) (m) tan 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS UOPDC AT 70 C = 800 V, UOPDC AT 105 C = 500 V 700 35 30 45 42 37.5 10.2/20.3 40 1400 17 18.5 4 3.5 135 120 MKP1848635704P* 30 25 45 57.5 52.5 10.2 20 600 11 12 9 8 270 240 MKP1848630704Y* 35 25 45 57.5 52.5 10.2 20 700 12 12.5 7.5 7 270 240 MKP1848635704Y* 40 25 45 57.5 52.5 10.2 20 800 13 13.5 6.5 6 270 240 MKP1848640704Y* 45 30 45 57.5 52.5 20.3 20 900 14.5 15 6 5.5 270 240 MKP1848645704Y* 50 30 45 57.5 52.5 20.3 20 1000 15 15.5 5.5 5 270 240 MKP1848650704Y* 55 35 50 57.5 52.5 20.3 20 1100 17 18 5 4.5 270 240 MKP1848655704Y* 60 35 50 57.5 52.5 20.3 20 1200 18 19 4.5 4 270 240 MKP1848660704Y* 65 35 50 57.5 52.5 20.3 20 1300 19 20.5 4 3.5 270 240 MKP1848665704Y* 70 45 45 57.5 52.5 20.3 20 1400 - 20 - 3.5 - 240 MKP1848670704Y5 75 45 45 57.5 52.5 20.3 20 1500 - 21.5 - 3 - 240 MKP1848675704Y5 80 45 45 57.5 52.5 20.3 20 1600 - 21.5 - 3 - 240 MKP1848680704Y5 160 70 65 57.5 52.5 20.3 20 3200 - 30.5 - 2.5 - 280 MKP1848716704Y5 (6) 320 130 65 57.5 52.5 20.3 20 6400 - 54 - 1.3 - 280 MKP1848732704Y5 (7) UOPDC AT 70 C = 900 V, UOPDC AT 105 C = 570 V 800 1 9 19 32 27.5 - 75 75 2 - 62.5 - 60 - MKP1848510084K2 2 11 21 32 27.5 - 75 150 3.5 - 31 - 60 - MKP1848520084K2 3 13 23 32 27.5 - 75 225 4.5 - 21 - 60 - MKP1848530084K2 4 15 25 32 27.5 - 75 300 5.5 - 15.5 - 60 - MKP1848540084K2 5 18 28 32 27.5 - 75 375 7 - 12.5 - 60 - MKP1848550084K2 6 18 28 32 27.5 - 75 450 7.5 - 10.5 - 60 - MKP1848560084K2 7 21 31 32 27.5 - 75 525 9 - 9 - 60 - MKP1848570084K2 8 21 31 32 27.5 - 75 600 9.5 - 8 - 60 - MKP1848580084K2 9 20 35 32 27.5 - 75 675 10 - 8 - 60 - MKP1848590084K2 10 18.5 35.5 43 37.5 10.2 40 400 8 8.5 12.5 11 122 110 MKP1848610084P* 12 18.5 35.5 43 37.5 10.2 40 480 8.5 9 10.5 9 122 110 MKP1848612084P* 15 21.5 38.5 43 37.5 10.2 40 600 10 11 8.5 7.5 122 110 MKP1848615084P* 20 24 44 42 37.5 10.2 40 800 13 13.5 6 5.5 122 110 MKP1848620084P* 22 30 45 42 37.5 10.2/20.3 40 880 14.5 15.5 5.5 5 122 110 MKP1848622084P* 25 30 45 42 37.5 10.2/20.3 40 1000 15.5 16 5 4.5 122 110 MKP1848625084P* 30 25 45 57.5 52.5 10.2 10 300 12 12 8 7.5 240 215 MKP1848630084Y* 35 30 45 57.5 52.5 20.3 10 350 13 14.5 7 6 240 215 MKP1848635084Y* 40 30 45 57.5 52.5 20.3 10 400 14.5 15 6 5.5 240 215 MKP1848640084Y* 45 35 50 57.5 52.5 20.3 10 450 16 17 5.5 5 240 215 MKP1848645084Y* 50 35 50 57.5 52.5 20.3 10 500 17 18 5 4.5 240 215 MKP1848650084Y* 55 45 45 57.5 52.5 20.3 10 550 - 18.5 - 4 - 215 MKP1848655084Y5 60 45 45 57.5 52.5 20.3 10 600 - 20 - 3.5 - 215 MKP1848660084Y5 120 70 65 57.5 52.5 20.3 10 1600 - 27 - 3.2 - 215 MKP1848712084Y5 (6) 240 130 65 57.5 52.5 20.3 10 3200 - 48.5 - 1.6 - 215 MKP1848724084Y5 (7) Revision: 13-Nov-12 Document Number: 28164 5 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 C (F) (V) DIMENSION (5) (mm) P1 (mm) P2 (mm) dV/dt IPEAK (V/s) (A) IRMS (2) (A) ESR (3) (m) tan 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS w h l 1 9 19 32 27.5 - 40 40 2 2 13 23 32 27.5 - 80 160 3.5 - 32 - 50 - MKP1848520094K2 3 15 25 32 27.5 - 80 240 5 - 21 - 50 - MKP1848530094K2 4 18 28 32 27.5 - 80 320 6 - 16 - 50 - MKP1848540094K2 5 21 31 32 27.5 - 80 400 7.5 - 13 - 50 - MKP1848550094K2 6 21 31 32 27.5 - 80 480 8.5 - 10 - 50 - MKP1848560094K2 MKP1848570094K2 UOPDC AT 70 C = 1100 V, UOPDC AT 105 C = 650 V 900 - 63 - 50 - MKP1848510094K2 7 20 35 32 27.5 - 80 560 9 - 9 - 50 - 5 18.5 35.5 43 37.5 10.2 20 100 6 6.5 21 19 100 90 MKP1848550094P* 6 18.5 35.5 43 37.5 10.2 40 240 6.5 7 18 16 100 90 MKP1848560094P* 7 18.5 35.5 43 37.5 10.2 40 280 6.5 7 18 16 100 90 MKP1848570094P* 8 18.5 35.5 43 37.5 10.2 40 320 7 7.5 16 14 100 90 MKP1848580094P* 9 18.5 35.5 43 37.5 10.2 40 360 7.5 8 14 12 100 90 MKP1848590094P* 10 21.5 38.5 43 37.5 10.2 40 400 8.5 9 12 11 100 90 MKP1848610094P* 12 21.5 38.5 43 37.5 10.2 40 480 9.5 10 10 9 100 90 MKP1848612094P* 15 24 44 42 37.5 10.2 40 600 11 12 8 7 100 90 MKP1848615094P* 16 24 44 42 37.5 10.2 40 640 11 12 8 7 100 90 MKP1848616094P* 20 30 45 42 37.5 10.2/20.3 40 800 14 15.5 6 5 100 90 MKP1848620094P* 15 25 45 57.5 52.5 10.2 20 300 9 9.5 14 12 200 185 MKP1848615094Y* 20 25 45 57.5 52.5 10.2 20 400 9.5 10 12 11 200 185 MKP1848620094Y* 22 25 45 57.5 52.5 10.2 20 440 10 10.5 11 10 200 185 MKP1848622094Y* 25 30 45 57.5 52.5 20.3 20 500 11 11.5 10 9 200 185 MKP1848625094Y* 30 30 45 57.5 52.5 20.3 20 600 12.5 13 8 7 200 185 MKP1848630094Y* 35 35 50 57.5 52.5 20.3 20 700 14.5 15.5 7 6 200 185 MKP1848635094Y* 40 35 50 57.5 52.5 20.3 20 800 15.5 17 6 5 200 185 MKP1848640094Y* 45 45 45 57.5 52.5 20.3 20 900 - 16.5 - 5 - 185 MKP1848645094Y5 50 45 45 57.5 52.5 20.3 20 1000 - 18.5 - 4 - 185 MKP1848650094Y5 100 70 65 57.5 52.5 20.3 20 2000 - 26.5 - 3.3 - 205 MKP1848710094Y5 (6) 200 130 65 57.5 52.5 20.3 20 4000 - 48.5 - 1.6 - 205 MKP1848720094Y5 (7) 1 11 21 32 27.5 - 95 95 3 - 2 15 25 32 27.5 - 95 190 4.5 3 18 28 32 27.5 - 95 285 6 4 21 31 32 27.5 - 95 380 8 UOPDC AT 70 C = 1350 V, UOPDC AT 105 C = 800 V 1100 45.5 - 45 - MKP1848510914K2 - 23 - 45 - MKP1848520914K2 - 15.5 - 45 - MKP1848530914K2 - 11.5 - 45 - MKP1848540914K2 5 20 35 32 27.5 - 95 475 9 - 9.5 - 45 - MKP1848550914K2 5 18.5 35.5 43 37.5 10.2 45 225 6.5 7 18 16 90 80 MKP1848550914P* 6 18.5 35.5 43 37.5 10.2 45 270 7 7.5 15 13.5 90 80 MKP1848560914P* 7 21.5 38.5 43 37.5 10.2 45 315 8 8.5 13 11.5 90 80 MKP1848570914P* 8 21.5 38.5 43 37.5 10.2 45 360 9 9.5 11 10 90 80 MKP1848580914P* 9 24 44 42 37.5 10.2 45 405 10 10.5 10 9 90 80 MKP1848590914P* 10 24 44 42 37.5 10.2 45 450 10.5 11 9 8 90 80 MKP1848610914P* 12 30 45 42 37.5 10.2/20.3 45 540 12.5 13.5 7.5 6.5 90 80 MKP1848612914P* Revision: 13-Nov-12 Document Number: 28164 6 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 C (F) (V) DIMENSION (5) (mm) P1 (mm) P2 (mm) dV/dt IPEAK (V/s) (A) IRMS (2) (A) ESR (3) (m) tan 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS w h l 10 25 45 57.5 52.5 10.2 23 230 8 12 25 45 57.5 52.5 10.2 23 276 8.5 9 15 13 175 155 MKP1848612914Y* 15 25 45 57.5 52.5 10.2 23 345 9.5 10.5 12 10.5 175 155 MKP1848615914Y* 20 30 45 57.5 52.5 20.3 23 460 11.5 12.5 9 8 175 155 MKP1848620914Y* 22 35 50 57.5 52.5 20.3 23 506 13.5 14.5 8 7 175 155 MKP1848622914Y* 25 35 50 57.5 52.5 20.3 23 575 14.5 15 7 6.5 175 155 MKP1848625914Y* 30 45 45 57.5 52.5 20.3 23 690 - 16.5 - 5 - 155 MKP1848630914Y5 60 70 65 57.5 52.5 20.3 23 1380 - 40 - 2.5 - 180 MKP1848660914Y5 (6) 70 70 65 57.5 52.5 20.3 23 1610 - 34.5 - 2 - 180 MKP1848670914Y5 (6) 120 130 65 57.5 52.5 20.3 23 2760 - 39.5 - 2.4 - 180 MKP1848712914Y5 (7) 140 130 65 57.5 52.5 20.3 23 3220 - 43.5 - 2 - 180 MKP1848714914Y5 (7) UOPDC AT 70 C = 1350 V, UOPDC AT 105 C = 800 V 1100 8.5 18 16 175 155 MKP1848610914Y* UOPDC AT 70 C = 1500 V, UOPDC AT 105 C = 850 V 1200 1 11 21 32 27.5 - 100 100 3 - 43 - 40 - MKP1848510924K2 2 15 25 32 27.5 - 100 200 5 - 21.5 - 40 - MKP1848520924K2 3 18 28 32 27.5 - 100 300 6.5 - 14.5 - 40 - MKP1848530924K2 4 21 31 32 27.5 - 100 400 8 - 11 - 40 - MKP1848540924K2 5 18.5 35.5 43 37.5 10.2 48 240 6.5 7 17 15 80 70 MKP1848550924P* 6 18.5 35.5 43 37.5 10.2 48 288 7.5 8 14 12.5 80 70 MKP1848560924P* 7 21.5 38.5 43 37.5 10.2 48 336 8.5 9 12 11 80 70 MKP1848570924P* 8 21.5 38.5 43 37.5 10.2 48 384 9 9.5 10.5 9.5 80 70 MKP1848580924P* 9 24 44 42 37.5 10.2 48 432 10.5 11 9.5 8.5 80 70 MKP1848590924P* 10 24 44 42 37.5 10.2 48 480 11 11.5 8.5 7.5 80 70 MKP1848610924P* MKP1848612924P* 12 30 45 42 37.5 10.2/20.3 48 576 13 13.5 7 6.5 80 70 10 25 45 57.5 52.5 10.2 24 240 8 8.5 17 15 165 150 MKP1848610924Y* 12 25 45 57.5 52.5 10.2 24 288 9 9.5 14 12.5 165 150 MKP1848612924Y* 15 25 45 57.5 52.5 10.2 24 360 10 10.5 11 10 165 150 MKP1848615924Y* 20 35 50 57.5 52.5 20.3 24 480 13 14 8.5 7.5 165 150 MKP1848620924Y* 22 35 50 57.5 52.5 20.3 24 528 14 14.5 7.5 7 165 150 MKP1848622924Y* 25 35 50 57.5 52.5 20.3 24 600 15 15.5 6.5 6 165 150 MKP1848625924Y* 30 45 45 57.5 52.5 20.3 24 720 - 16.5 - 5 - 150 MKP1848630924Y5 60 70 65 57.5 52.5 20.3 24 1440 - 23 - 4.5 - 170 MKP1848660924Y5 (6) 120 130 65 57.5 52.5 20.3 24 2280 - 40.5 - 2.3 - 170 MKP1848712924Y5 (7) Notes (1) Change the * symbol with special code for the terminals (2) Maximum RMS current at 10 kHz, + 85 C, t = + 15 C, capacitance tolerlance 5 % (3) Equivalent series resistance typical values at f = 10 kHz to 100 kHz for P = 27.5 mm, at f = 10 kHz to 70 kHz for P = 37.5 mm, at f = 10 kHz to 50 kHz for P = 52.5 mm (4) Maximum tan values (5) Standard dimension (6) 6 pins (7) 12 pins (8) Intermediate capacitance values available on request Revision: 13-Nov-12 Document Number: 28164 7 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC AT 85 C (V) HEIGHT (mm) CAP. (5) (F) MASS (g) SPQ (2) (pcs) 19 1 0.8 MKP1848510454K2 6 160 19 2 21 3 0.8 MKP1848520454K2 5.5 160 0.8 MKP1848530454K2 8.5 130 21 23 4 0.8 MKP1848540454K2 8.5 130 5 0.8 MKP1848550454K2 10.5 115 25 6 0.8 MKP1848560454K2 12.5 100 25 7 0.8 MKP1848570454K2 11.5 100 28 8 0.8 MKP1848580454K2 15 80 28 9 0.8 MKP1848590454K2 16 80 28 10 0.8 MKP1848610454K2 15 80 31 12 0.8 MKP1848612454K2 21.5 65 O dt ORDERING CODE (1) UOPDC AT 70 C = 500 V, UOPDC AT 105 C = 300 V 450 35 15 0.8 MKP1848615454K2 20 70 35.5 10 1.0 MKP1848610454P* 34 105 35.5 12 1.0 MKP1848612454P* 32 105 35.5 15 1.0 MKP1848615454P* 30 105 38.5 20 1.0 MKP1848620454P* 36 91 38.5 22 1.0 MKP1848622454P* 38 91 38.5 25 1.0 MKP1848625454P* 36 91 44 30 1.0 MKP1848630454P* 48 77 45 35 1.0 MKP1848635454P* 57 63 45 40 1.0 MKP1848640454P* 60 63 45 40 1.2 MKP1848640454Y* 66 55 45 45 1.2 MKP1848645454Y* 70 55 45 50 1.2 MKP1848650454Y* 88 45 45 55 1.2 MKP1848655454Y* 96 45 45 60 1.2 MKP1848660454Y* 91 45 50 65 1.2 MKP1848665454Y* 100 40 50 70 1.2 MKP1848670454Y* 112 40 50 75 1.2 MKP1848675454Y* 108 40 50 80 1.2 MKP1848680454Y* 102 40 45 90 1.2 MKP1848690454Y5 127 30 45 95 1.2 MKP1848695454Y5 124 30 45 100 1.2 MKP1848710454Y5 120 30 (3) 266 20 490 10 65 200 1.2 MKP1848720454Y5 65 400 1.2 MKP1848740454Y5 (4) 19 1 0.8 MKP1848510704K2 6 160 19 2 0.8 MKP1848520704K2 5.5 160 21 3 0.8 MKP1848530704K2 8.5 130 23 4 0.8 MKP1848540704K2 10.5 115 25 5 0.8 MKP1848550704K2 12 100 28 6 0.8 MKP1848560704K2 17 80 28 7 0.8 MKP1848570704K2 16 80 UOPDC AT 70 C = 800 V, UOPDC AT 105 C = 500 V 700 Revision: 13-Nov-12 Document Number: 28164 8 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC AT 85 C (V) HEIGHT (mm) CAP. (5) (F) MASS (g) SPQ (2) (pcs) 28 8 0.8 31 9 0.8 MKP1848580704K2 15 80 MKP1848590704K2 22 65 31 10 35 12 0.8 MKP1848610704K2 21 65 0.8 MKP1848612704K2 20 35.5 70 10 1.0 MKP1848610704P* 34 105 35.5 12 1.0 MKP1848612704P* 32 105 35.5 15 1.0 MKP1848615704P* 30 105 O dt ORDERING CODE (1) UOPDC AT 70 C = 800 V, UOPDC AT 105 C = 500 V 700 38.5 20 1.0 MKP1848620704P* 36 91 44 22 1.0 MKP1848622704P* 49 77 44 25 1.0 MKP1848625704P* 47 77 45 30 1.0 MKP1848630704P* 62 63 45 35 1.0 MKP1848635704P* 55 63 45 30 1.2 MKP1848630704Y* 76 55 45 35 1.2 MKP1848635704Y* 71 55 45 40 1.2 MKP1848640704Y* 66 55 45 45 1.2 MKP1848645704Y* 95 45 45 50 1.2 MKP1848650704Y* 88 45 50 55 1.2 MKP1848655704Y* 112 40 50 60 1.2 MKP1848660704Y* 107 40 50 65 1.2 MKP1848665704Y* 100 40 45 70 1.2 MKP1848670704Y5 128 30 45 75 1.2 MKP1848675704Y5 123 30 45 80 1.2 MKP1848680704Y5 119 30 (3) 264 20 359 10 65 160 1.2 MKP1848716704Y5 65 320 1.2 MKP1848732704Y5 (4) UOPDC AT 70 C = 900 V, UOPDC AT 105 C = 570 V 800 Revision: 13-Nov-12 19 1 0.8 MKP1848510084K2 6.5 160 21 2 0.8 MKP1848520084K2 9 130 23 3 0.8 MKP1848530084K2 11 115 25 4 0.8 MKP1848540084K2 12 100 28 5 0.8 MKP1848550084K2 17 80 28 6 0.8 MKP1848560084K2 16 80 31 7 0.8 MKP1848570084K2 23 65 31 8 0.8 MKP1848580084K2 21 65 35 9 0.8 MKP1848590084K2 21 70 35.5 10 1.0 MKP1848610084P* 32 105 35.5 12 1.0 MKP1848612084P* 30 105 38.5 15 1.0 MKP1848615084P* 37 91 44 20 1.0 MKP1848620084P* 47 77 45 22 1.0 MKP1848622084P* 65 63 45 25 1.0 MKP1848625084P* 61 63 45 30 1.2 MKP1848630084Y* 69 55 45 35 1.2 MKP1848635084Y* 97 45 Document Number: 28164 9 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC AT 85 C (V) HEIGHT (mm) CAP. (5) (F) 45 40 1.2 MKP1848640084Y* 91 45 50 45 1.2 MKP1848645084Y* 112 40 O dt ORDERING CODE (1) MASS (g) SPQ (2) (pcs) UOPDC AT 70 C = 900 V, UOPDC AT 105 C = 570 V 800 50 50 1.2 MKP1848650084Y* 104 40 45 55 1.2 MKP1848655084Y5 131 30 45 60 1.2 MKP1848660084Y5 125 30 (3) 276 20 393 10 65 120 1.2 MKP1848712084Y5 65 240 1.2 MKP1848724084Y5 (4) 19 1 0.8 MKP1848510094K2 6 160 23 2 0.8 MKP1848520094K2 11 115 25 3 0.8 MKP1848530094K2 12 100 28 4 0.8 MKP1848540094K2 16.5 80 31 5 0.8 MKP1848550094K2 22.5 65 31 6 0.8 MKP1848560094K2 21 65 35 7 0.8 MKP1848570094K2 21 70 35.5 5 1.0 MKP1848550094P* 32 105 35.5 6 1.0 MKP1848560094P* 30 105 35.5 7 1.0 MKP1848570094P* 33 105 35.5 8 1.0 MKP1848580094P* 31 105 35.5 9 1.0 MKP1848590094P* 30 105 38.5 10 1.0 MKP1848610094P* 39 91 38.5 12 1.0 MKP1848612094P* 36 91 44 15 1.0 MKP1848615094P* 47 77 44 16 1.0 MKP1848616094P* 45 77 45 20 1.0 MKP1848620094P* 57 63 45 15 1.2 MKP1848615094Y* 70 55 45 20 1.2 MKP1848620094Y* 73 55 45 22 1.2 MKP1848622094Y* 70 55 45 25 1.2 MKP1848625094Y* 98 45 45 30 1.2 MKP1848630094Y* 89 45 50 35 1.2 MKP1848635094Y* 109 40 UOPDC AT 70 C = 1100 V, UOPDC AT 105 C = 650 V 900 50 40 1.2 MKP1848640094Y* 99 40 45 45 1.2 MKP1848645094Y5 124 30 45 50 1.2 MKP1848650094Y5 117 30 (3) 259 20 608 10 65 100 1.2 MKP1848710094Y5 65 200 1.2 MKP1848720094Y5 (4) UOPDC AT 70 C = 1350 V, UOPDC AT 105 C = 800 V 1100 Revision: 13-Nov-12 21 1 0.8 MKP1848510914K2 9 130 25 2 0.8 MKP1848520914K2 12 100 28 3 0.8 MKP1848530914K2 16 80 31 4 0.8 MKP1848540914K2 21.5 65 35 5 0.8 MKP1848550914K2 21.5 65 35.5 5 1.0 MKP1848550914P* 33 105 Document Number: 28164 10 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC AT 85 C (V) HEIGHT (mm) CAP. (5) (F) 35.5 6 1.0 38.5 7 1.0 O dt MASS (g) SPQ (2) (pcs) MKP1848560914P* 30 105 MKP1848570914P* 39 91 ORDERING CODE (1) UOPDC AT 70 C = 1350 V, UOPDC AT 105 C = 800 V 1100 38.5 8 1.0 MKP1848580914P* 37 91 44 9 1.0 MKP1848590914P* 50 77 44 10 1.0 MKP1848610914P* 48 77 45 12 1.0 MKP1848612914P* 63 63 45 10 1.2 MKP1848610914Y* 81 55 45 12 1.2 MKP1848612914Y* 77 55 45 15 1.2 MKP1848615914Y* 70 55 45 20 1.2 MKP1848620914Y* 91 45 50 22 1.2 MKP1848622914Y* 115 40 50 25 1.2 MKP1848625914Y* 108 40 45 30 1.2 MKP1848630914Y5 126 30 65 60 1.2 MKP1848660914Y5 (3) 256 20 65 70 1.2 MKP1848670914Y5 (3) 257 20 (4) 606 10 608 10 65 120 1.2 MKP1848712914Y5 65 140 1.2 MKP1848714914Y5 (4) UOPDC AT 70 C = 1500 V, UOPDC AT 105 C = 850 V 1200 21 1 0.8 MKP1848510924K2 9 130 25 2 0.8 MKP1848520924K2 11.5 100 28 3 0.8 MKP1848530924K2 15 80 31 4 0.8 MKP1848540924K2 20 65 35.5 5 1.0 MKP1848550924P* 31 105 35.5 6 1.0 MKP1848560924P* 29 105 38.5 7 1.0 MKP1848570924P* 37 91 38.5 8 1.0 MKP1848580924P* 35 91 44 9 1.0 MKP1848590924P* 48 77 44 10 1.0 MKP1848610924P* 45 77 45 12 1.0 MKP1848612924P* 60 63 45 10 1.2 MKP1848610924Y* 79 55 45 12 1.2 MKP1848612924Y* 74 55 45 15 1.2 MKP1848615924Y* 67 55 50 20 1.2 MKP1848620924Y* 115 40 50 22 1.2 MKP1848622924Y* 109 40 50 25 1.2 MKP1848625924Y* 100 40 45 30 1.2 MKP1848630924Y5 119 30 65 60 1.2 MKP1848660924Y5 (3) 264 20 1.2 (4) 612 10 65 120 MKP1848712924Y5 Notes (1) Change the * symbol with special code for the terminals (2) SPQ = Standard Packing Quantity (3) 6 pins (4) 12 pins (5) Intermediate capacitance values available on request Revision: 13-Nov-12 Document Number: 28164 11 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein CONSTRUCTION DESCRIPTION Low inductive wound cell elements of metallized polypropylene film, potted with resin in a flame retardant case. Specific Method of Mounting to Withstand Vibration and Shock The capacitor unit is designed for mounting on a printed circuit board. In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed circuit board. The capacitors shall be mechanically fixed by the leads and the body clamped. Space Requirements on Printed-Circuit Board The maximum length and width of film capacitors is shown in the figure: * Product height with seating plane as given by "IEC 60717" as reference: Wmax. P2 2 x P2 0.5 mm 3 x P2 0.5 mm 4 x P2 0.5 mm 5 x P2 0.5 mm Lmax. P1 OD P1 (mm) Lmax. (mm) Wmax. (mm) O D (mm) H (mm) 27.5 l + 1.6 w + 2.0 1.2 h + 0.2 37.5 l + 2.0 w + 3.0 1.5 h + 0.5 52.5 l + 2.4 w + 4.0 1.7 h + 0.5 SOLDERING CONDITIONS For general soldering conditions and wave soldering profile, we refer to the application note: "Soldering Guidelines for Film Capacitors": www.vishay.com/doc?28171 Storage Temperature Tstg = - 25 C to + 35 C with RH maximum 75 % without condensation. Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 C 1 C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % 2 %. For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 13-Nov-12 Document Number: 28164 12 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein CHARACTERISTICS 105 4 3 2 0 RC (s) C/C (%) 1 -1 104 -2 -3 -4 -5 -6 - 60 - 40 - 20 0 20 40 60 80 100 120 Tamb (C) 103 0 20 40 Insulation resistance (typical curve) Capacitance (typical curve) 100 1.3 Pitch 27.5 mm 1.2 10 70 C 1.1 1 F 1.0 1 85 C Z () UOPDC/UNDC (V) 80 100 Tamb (C) 60 0.9 12 F 0.1 0.8 0.7 0.01 105 C 0.6 0.5 103 104 105 106 Lifetime expectancy (h) 0.001 104 105 106 107 f (Hz) Impedance vs. frequency (typical curve) Lifetime expectancy (typical curve) 10.0 10.0 Pitch 37.5 mm Pitch 52.5 mm 1.0 1.0 10 F 0.1 Z () Z () 40 F 80 F 0.1 80 F 0.01 0.01 0.001 104 105 106 107 f (Hz) Impedance vs. frequency (typical curve) Revision: 13-Nov-12 0.001 104 105 106 f (Hz) 107 Impedance vs. frequency (typical curve) Document Number: 28164 13 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein 1.6 IRMS operational/IRMS max. 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 50 60 70 80 90 100 Maximum ambient temperature (C) 110 Maximum IRMS current in function of the ambient temperature HEAT CONDUCTIVITY DIMENSIONS (mm) w h l HEAT CONDUCTIVITY (mW/C) 9.0 19.0 32.0 24 11.0 21.0 32.0 28 13.0 23.0 32.0 32 15.0 25.0 32.0 36 18.0 28.0 32.0 44 21.0 31.0 32.0 51 21.0 35.0 32.0 56 18.5 35.5 43.0 54 21.5 38.5 43.0 61 24.0 44.0 42.0 70 30.0 45.0 42.0 81 25.0 45.0 57.5 77 30.0 45.0 57.5 85 35.0 50.0 57.5 100 45.0 45.0 57.5 94 70.0 65.0 57.5 152 130.0 65.0 57.5 243 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The component temperature rise (T) can be measured or calculated by T = P/G: * T = TC - Tamb = Case temperature rise (C) with a maximum of 15 C at rated temperature. * P = IRMS2 x ESR = Power dissipation of the component (mW) * G = Heat conductivity of the component (mW/C) Revision: 13-Nov-12 Document Number: 28164 14 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein MEASURING THE COMPONENT TEMPERATURE Thermocouple The case temperature is measured in unloaded (Tamb) and maximum loaded condition (TC). To avoid thermal radiation or convection, the capacitor must be tested in a closed area from air circulation. APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: * The continuous peak voltage (UP+) shall not exceed the rated DC voltage rating (UNDC) * The peak-to-peak ripple voltage (UPP) shall not be greater than 0.2 x (UNDC) Voltage (V) Non reversing recurrent waveform Up+ UNDC Upt * For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com * The voltage peak slope (dU/dt) shall not exceed the pulse slope at the DC voltage rating. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by UNDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: T dU 2 dU 2 x ------- x dt U NDC x ------- dt dt rated 0 T is the pulse duration Maximum Repetitive Peak Voltages The capacitor unit may be subjected to the following surge without any significant reduction of lifetime expectancy REPETITIVE SURGE VOLTAGE MAXIMUM DURATION PER DAY 1.1 x UNDC 30 % on load duration 1.15 x UNDC 30 min 1.2 x UNDC 5 min Revision: 13-Nov-12 1.3 x UNDC 1 min 1.5 x UNDC 110 ms Document Number: 28164 15 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the "Sectional Specification, Publication IEC 61071". SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS ROUTINE TEST-FINAL INSPECTION 5.14.2.1 External inspection, visual examination Legible marking as specified 5.14.2.2 Dimensions See specification drawing 5.3.1 Capacitance 1 kHz at room temperature See specific reference data 5.3.2 tan 1 kHz at room temperature 10 kHz at room temperature See specific reference data 5.5.1.2 Voltage test between terminal 1.5 x UNDC at Tamb Duration 10 s No visible damage or puncture No flashover 5.7 Insulation resistance UNDC 500 V measuring voltage 100 V at room temperature See specific reference data UNDC > 500 V measuring voltage 500 V at room temperature Duration 1 min TYPE TESTS 5.14.2 External inspection Check for finish, marking and overall dimensions 5.14.0 Initial measurements Capacitance at 1 kHz tan at 10 kHz 5.14.1.1.4 Robustness of terminations IEC 60068-2-21 Tensile Ua1 Wire diameter section 0.8 mm 0.5 mm2 1.25 mm 1.2 mm2 Duration 10 s 1 s Bending Ub method 1 Wire diameter section 0.8 mm 0.05 mm3 1.25 mm 0.019 mm3 20 N 4 x 90 , Duration 2 s to 3 s/bend 5.14.1.6 Resistance to soldering heat IEC 60068-2-20 No predrying, Method 1A Solder bath: 260 C Duration 10 s 1 s 5.14.4 Final measurements Capacitance tan 5.14.0 Initial measurements Capacitance at 1 kHz tan at 10 kHz Revision: 13-Nov-12 Legible marking and finish as specified Dimensions: See specific drawing load 10 N 20 N load 10 N |C/C| 0.5 % Increase of tan 0.0050 Compared to values measured in 5.14.0 Document Number: 28164 16 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS TYPE TESTS 5.14.3.1 5.14.3.2 Vibration IEC 60068-2-6 Shock or impact IEC 60068-2-6 10 Hz to 55 Hz: Amplitude 0.35 mm or acceleration 98 m/s2 Test duration: 10 frequency cycles, 3 axes offset from each other by 90 1 octave/min Visual examination No visible damages Pulse shape: Half sine Acceleration: 490 m/s2 Duration t of pulse: 11 ms Visual examination No visible damage 5.14.4 Final measurements Capacitance tan 5.5.3.1 Initial measurements Capacitance at 1 kHz tan at 10 kHz R insulation 5.5.3.2 Voltage test between terminal 1.5 x UNDC at Tamb Duration 60 s 5.5.3.3 Final measurements Capacitance tan R insulation 5.9.1 Initial measurements Capacitance at 1 kHz tan at 10 kHz 5.9.2 Surge discharge test 1.1 x UNDC Number of discharges: 5 Time lapse: Every 2 min (10 min total) 5.9.3 Voltage test between terminal Within 5 min after the surge discharge test Duration 60 s 1.5 x UNDC at Tamb 5.9.3 Final measurements Capacitance tan at 10 kHz 5.11.1 Initial measurements Capacitance at 1 kHz tan at 10 kHz 5.11.2 Self healing test 1.5 x UNDC Duration 10 s Number of clearings 5 Clearing = Voltage drop of 5 % increase the voltage at 100 V/s till 5 clearings occur with a max. of 2.5 x UNDC for a duration of 10 s 5.11.3 Final measurements Capacitance tan Revision: 13-Nov-12 |C/C| 0.5 % Increase of tan 0.0050 Compared to values measured in 5.14.0 |C/C| 0.5 % Increase of tan 1.2 initial tan + 0.0001 R insulation 50 % of specified values |C/C| 1.0 % tan 1.2 initial tan + 0.0001 Compared to values measured in 5.9.1 |C/C| 0.5 % tan 1.2 x initial tan + 0.0001 Compared to values measured in 5.11.1 Document Number: 28164 17 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS TYPE TESTS 5.13.0 Initial measurements Capacitance at 1 kHz tan at 10 kHz 5.13.1 Change of temperature acc. to IEC 60068-2-14 Test Nb Tmax. = 85 C Tmin. = - 40 C Transition time: 1 h, equivalent to 1 C/min 5.13.2 Damp heat steady state acc. to IEC 60068-2-78 Test Ca Tmax. = 40 C 2 C RH = 93 % 3 % Duration 56 days 5.5.3.2 Voltage test between terminal 1.5 x UNDC at ambient temperature Duration 60 s 5.13.3 Final measurements Visual examination No puncturing or flashover Self healing punctures are permitted Capacitance tan at 1 URMS 10 kHz |C/C| 2.0 % Increase of tan 0.0150 Compared to values measured in 5.13.0 5.10.0 Initial measurements Capacitance at 1 kHz tan at 10 kHz 5.10.1 Thermal stability test under overload conditions Natural cooling Tamb 5 C 1.21 x Pmax. = (U2/2) x W2 x C x tan = 121 x (I2max./W2 x c) x tan 2 with W2 = 2 x p x f2 for Imax. (see specific reference data) f2 = 10 kHz Duration 48 h 5.10.2 Final measurements Measure the temperature every 1.5 h during the last 6 h Capacitance tan at 10 kHz Temperature rise < 1 C |C/C| 2 % Increase of tan 1.2 x initial + 0.0150 5.12 Impedance analyser at Tamb < 0.9 times the value as specified in typical curve "Resonant frequency" of this specification Resonance frequency measurement 5.10.0 Initial measurements Capacitance at 1 kHz tan at 10 kHz 5.15.1 Endurance test between terminals Sequence 1.4 x UNDC at Tmax. = 85 C 1.4 x UOPDC at 105 C Duration 250 h 1000 x discharge at 1.4 x I (maximum repetitive peak current in continuous operation) 1.4 x UNDC at Tmax. = 85 C 1.4 x UOPDC at 105 C Duration 250 h 5.15.2 Final measurements Capacitance tan Revision: 13-Nov-12 |C/C| 3 % Increase of tan 0.0150 Compared to values measured in 5.15.0 Document Number: 28164 18 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com SUB-CLAUSE NUMBER AND TEST Vishay Roederstein CONDITIONS PERFORMANCE REQUIREMENTS TYPE TESTS 5.16.3.0 Initial measurements Capacitance at 1 kHz at Tmax. = 85 C 5.16.3.1 Destruction test sequence High DC voltage test Product enveloped with chees cloth 3 x UNDC or DC voltage Until repetitive product healings occur Duration = 15 min High AC voltage test 5.16.3.2 Final measurements Revision: 13-Nov-12 Audible healings or check healings with oscilloscope ACRMS voltage = UNDC x 2 2 with minimum of 250 VAC Duration = 5 min Repeat destruction sequence 3 x Visual examination No puncturing or flashover Self healing punctures are permitted Document Number: 28164 19 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000