F92 Series Resin-Molded Chip, Low Profile J-Lead FEATURES * Compliant to the RoHS2 directive 2011/65/EU * SMD J-lead * Low profile case sizes LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS * Handheld electronics * USB accessories L CASE DIMENSIONS: millimeters (inches) W1 Code H A W2 S L W1 W2 H S 3.20 0.20 1.60 0.20 1.20 0.10 1.10 0.10 0.80 0.20 (0.126 0.008) (0.063 0.008) (0.047 0.004) (0.043 0.004) (0.031 0.008) 3.40 0.20 2.80 0.20 2.30 0.10 1.10 0.10 0.80 0.20 (0.134 0.008) (0.110 0.008) (0.091 0.004) (0.043 0.004) (0.031 0.008) 2.00 0.20 1.25 0.10 0.90 0.10 1.10 0.10 0.50 0.20 (0.079 0.008) (0.049 0.004) (0.035 0.004) (0.043 0.004) (0.020 0.008) B S P MARKING P CASE A CASE *Rated Capacitance Code Rated Voltage Code G J A Rated Capacitance (F) 22 10V G 226 AS 4V 6.3V 10V B CASE Rated Capacitance Code 16V 20V 25V Rated Voltage Code C D E 35V Rated Voltage (V) V *Capacitance code of "P" case products are as shown below. HOW TO ORDER F92 0J 106 Type Rated Voltage Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) M P Tolerance M = 20% Case Size See table above Packaging See Tape & Reel Packaging Section TECHNICAL SPECIFICATIONS Category Temperature Range: Rated Temperature: Capacitance Tolerance: Dissipation Factor: ESR 100kHz: Leakage Current: Capacitance Change By Temperature -55 to +125C +85C 20% at 120Hz Refer to next page Refer to next page After 1 minute's application of rated voltage, leakage current at 20C is not more than 0.01CV or 0.5A, whichever is greater. After 1 minute's application of rated voltage, leakage current at 85C is not more than 0.1CV or 5A, whichever is greater. After 1 minute's application of derated voltage, leakage current at 125C is not more than 0.125CV or 6.3A, whichever is greater. P Case A, B Case +20% Max. at +125C +15% Max. at +125C +15% Max. at +85C +10% Max. at +85C -15% Max. at -55C -10% Max. at -55C APRIL 2014 43 F92 Series Resin-Molded Chip, Low Profile J-Lead CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance F Code 0.22 224 0.33 334 0.47 474 0.68 684 1 105 1.5 155 2.2 225 3.3 335 4.7 475 6.8 685 10 106 15 156 22 226 33 336 47 476 68 686 100 107 150 157 220 227 4V (0G) P P P A/P P A/P A/P A/B/P* A/B A/B B B* Available Ratings *Codes under development - subject to change 44 APRIL 2014 6.3V (0J) P P P P A/P A/P A/P A/B A/B Rated Voltage 10V (1A) 16V (1C) P P P A/P A/P A/P A/P A A/B B B P P P P A/P A A/B/P* B A/B B 20V (1D) 25V (1E) A/P A A/P A A/P* 35V (1V) A A A A/P A A/B B B A/B A/B B *Cap Code J N S W A E J N S w a e J n s A*/B Please contact to your local AVX sales office when these series are being designed in your application. F92 Series Resin-Molded Chip, Low Profile J-Lead RATINGS & PART NUMBER REFERENCE AVX Part No. Rated Case Capacitance Voltage Size (F) (V) F920G335MPA F920G475MPA F920G685MPA F920G106MAA F920G106MPA F920G156MPA F920G226MAA F920G226MPA F920G336MAA F920G336MPA F920G476MAA F920G476MBA F920G686MAA F920G686MBA F920G107MAA F920G107MBA F920G157MBA P P P A P P A P A P A B A B A B B 3.3 4.7 6.8 10 10 15 22 22 33 33 47 47 68 68 100 100 150 F920J225MPA F920J335MPA F920J475MPA F920J685MPA F920J106MAA F920J106MPA F920J156MAA F920J156MPA F920J226MAA F920J226MPA F920J336MAA F920J336MBA F920J476MAA F920J476MBA F920J107MBA P P P P A P A P A P A B A B B 2.2 3.3 4.7 6.8 10 10 15 15 22 22 33 33 47 47 100 F921A105MPA F921A155MPA F921A225MPA F921A335MAA F921A335MPA F921A475MAA F921A475MPA F921A685MAA F921A685MPA F921A106MAA P P P A P A P A P A 1 1.5 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10 4 Volt 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6.3 Volt 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 Volt 10 10 10 10 10 10 10 10 10 10 DCL (A) DF ESR (%) () @ 120Hz @ 100kHz *1 C/C (%) 0.5 0.5 0.5 0.5 0.5 0.6 0.9 0.9 1.3 1.3 1.9 1.9 2.7 2.7 4.0 4.0 6.0 8 8 10 8 10 10 12 20 12 20 18 12 25 18 30 18 25 12.0 6.0 6.0 4.0 6.0 5.0 2.8 5.0 2.8 4.0 2.8 1.7 2.8 1.5 2.8 1.3 1.3 * * * * * * * * * * * * 15 * 15 * 15 0.5 0.5 0.5 0.5 0.6 0.6 0.9 0.9 1.4 1.4 2.1 2.1 3.0 3.0 6.3 8 8 8 10 8 10 8 10 12 20 12 12 18 12 20 12.0 12.0 6.0 6.0 4.0 6.0 4.0 6.0 2.8 5.0 2.8 1.7 2.8 1.7 1.3 * * * * * * * * * * * * 15 * 15 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.7 1.0 8 8 8 6 8 6 8 6 8 8 12.0 12.0 12.0 7.0 12.0 4.0 6.0 4.0 6.0 4.0 * * * * * * * * * * *1: C/C Marked "*" Item Damp Heat Tempereature cycles Resistance soldering heat Surge Endurance AVX Part No. Rated Case Capacitance Voltage Size (F) (V) F921A106MPA F921A156MAA F921A226MAA F921A226MBA F921A336MBA F921A476MBA P A A B B B 10 15 22 22 33 47 F921C474MPA F921C684MPA F921C105MPA F921C155MPA F921C225MAA F921C225MPA F921C335MAA F921C475MAA F921C475MBA F921C685MBA F921C106MAA F921C106MBA F921C226MBA P P P P A P A A B B A B B 0.47 0.68 1 1.5 2.2 2.2 3.3 4.7 4.7 6.8 10 10 22 F921D474MAA F921D474MPA F921D684MAA F921D105MAA F921D105MPA F921D155MAA F921D225MAA F921D475MAA F921D475MBA F921D106MBA A P A A P A A A B B 0.47 0.47 0.68 1 1 1.5 2.2 4.7 4.7 10 F921E105MAA F921E105MPA F921E225MAA F921E225MBA F921E475MAA F921E475MBA A P A B A B 1 1 2.2 2.2 4.7 4.7 F921V224MAA F921V334MAA F921V474MAA F921V105MAA F921V225MBA F921V335MBA A A A A B B 0.22 0.33 0.47 1 2.2 3.3 10 10 10 10 10 10 16 Volt 16 16 16 16 16 16 16 16 16 16 16 16 16 20 Volt 20 20 20 20 20 20 20 20 20 20 25 Volt 25 25 25 25 25 25 35 Volt 35 35 35 35 35 35 DCL (A) DF ESR (%) () @ 120Hz @ 100kHz *1 C/C (%) 1.0 1.5 2.2 2.2 3.3 4.7 14 8 14 8 12 18 6.0 4.0 4.0 1.9 1.9 1.9 * * 15 * * 15 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 1.1 1.6 1.6 3.5 8 8 8 8 6 8 6 6 6 6 8 6 12 20.0 12.0 12.0 12.0 7.0 12.0 7.0 7.0 3.0 3.0 7.0 2.0 2.0 * * * * * * * * * * 15 * 15 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.9 0.9 2.0 4 8 4 4 8 6 6 10 6 8 10.0 20.0 10.0 10.0 20.0 7.4 7.0 7.0 3.0 3.0 * * * * * * * 10 * 10 0.5 0.5 0.6 0.6 1.2 1.2 6 8 8 6 10 6 10.0 20.0 10.0 4.0 7.0 3.0 * * 15 * 10 * 0.5 0.5 0.5 0.5 0.8 1.2 4 4 4 6 6 10 10.0 10.0 10.0 10.0 4.0 4.0 * * * * 10 10 * In case of capacitance tolerance 10% type, "K" will be put at 9th digit of type numbering system P Case (%) 20 10 10 10 10 A, B Case (%) 10 5 5 5 10 We can consider the type of compliance to AEC-Q200. Please contact to your local AVX sales office when these series are being designed in your application. APRIL 2014 45 F92 Series Resin-Molded Chip, Low Profile J-Lead QUALIFICATION TABLE Damp Heat (Steady State) Temperature Cycles Resistance to Soldering Heat Surge Endurance Shear Test Terminal Strength 46 APRIL 2014 P Case A, B Case At 40C, 90 to 95% R.H., 500 hours (No voltage applied) Capacitance Change ........... Refer to page 45 (*1) Refer to page 45 (*1) Dissipation Factor ................ 150% or less than the initial specified value Initial specified value or less Leakage Current .................. Initial specified value or less Initial specified value or less -55C / +125C, 30 minutes each, 5 cycles Capacitance Change ........... Refer to page 45 (*1) Refer to page 45 (*1) Dissipation Factor ................ 150% or less than the initial specified value Initial specified value or less Leakage Current .................. Initial specified value or less Initial specified value or less 10 seconds reflow at 260C, 5 seconds immersion at 260C. Capacitance Change ........... Refer to page 45 (*1) Refer to page 45 (*1) Dissipation Factor ................ 150% or less than the initial specified value Initial specified value or less Leakage Current .................. Initial specified value or less Initial specified value or less After application of surge voltage in series with a 33 (For "P" case: 1k) resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85C, capacitors shall meet the characteristic requirements in the table above. Capacitance Change ........... Refer to page 45 (*1) Refer to page 45 (*1) Dissipation Factor ................ 150% or less than the initial specified value Initial specified value or less Leakage Current .................. Initial specified value or less Initial specified value or less After 2000 hours' application of rated voltage in series with a 3 resistor at 85C, or derated voltage in series with a 3 resistor at 125C, capacitors shall meet the characteristic requirements in the table above. Capacitance Change ........... Refer to page 45 (*1) Refer to page 45 (*1) Dissipation Factor ................ 150% or less than the initial specified value Initial specified value or less Leakage Current .................. Initial specified value or less Initial specified value or less After applying the pressure load of 5N for 101 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the terminal electrode. Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a specified jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: AVX: F920E476MBA F920J106MPA F921D225MBA F921C474MPA F920J156MPA F920J106MAA F921A335MPA F921E225MBA F920G476MBA F921C684MPA F921E475MAA F921E684MBA F921A156MAA F920G106MPA F920J225MPA F920J685MPA F921V105MAA F921A685MPA F920G107MBA F920J107MBA F921D334MPA F921A476MBA F920J475MPA F920J476MAA F921A685MAA F921A106MPA F921A335MAA F920G225MPA F921D155MAA F920G335MPA F921A225MAA F921V225MBA F920J336MAA F921C106MAA F921A105MPA F921C685MBA F920G157MBA F921D474MAA F921V335MBA F921V334MAA F920G475MAA F920J476MBA F921C155MAA F920J226MAA F921D475MBA F921C105MPA F920J335MPA F920G476MAA F920G475MPA F921A155MPA F921E105MPA F921C475MAA F921D106MBA F920J336MBA F920J105MPA F921E474MAA F921D474MPA F921A475MPA F921A106MAA F920G226MAA F921A155MAA F920J226MPA F921A225MPA F921C106MBA F921E105MAA F920G685MPA F921D224MPA F920E226MAA F920G336MAA F921A336MBA F921A685MBA F921V474MAA F921C225MPA F920E336MPA F921D684MAA F921C225MAA F920E336MBA F921V224MAA F920J226MBA F920E107MBA F921C155MPA F921E225MAA F920G686MBA F921A226MAA F920G156MPA F921D105MAA F921A106MBA F920E686MBA F921E105MBA F921C335MAA F920G336MPA F920G107MAA F921D335MBA F921C226MBA F920J155MPA F920G686MAA F921V154MAA F921D225MAA F920G226MPA F921A226MBA