Specifications subject to change without notice.
Copyright © 2008-2012 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com 1/16/12 - R1
Built-in InfraRed Thermometer
Quickly identify overheating motors or locate hot spots on
electrical panels and HVAC vents without contact
Specifications
Display Counts 40,000 count
Basic Accuracy 0.06%
DC/AC Voltage 0.01mV to 1000V
DC/AC Current 0.01µA to 20A
Resistance 0.01Ω to 40MΩ
Capacitance 0.001nF to 10,000µF
Frequency 0.0001Hz to 40MHz
Temperature (Type K) -50 to 1382°F (-45 to 750°C)
IR Temperature -22 to 1022°F (-30 to 550°C)
Field of View 30:1 ratio
Duty Cycle 0.01 to 99.99%
Diode (2.8V)/Continuity Yes
ETL/CE approved Yes
Warranty 3 years
Dimensions 7.25x3.25x2.25" (184x83x57mm)
Weight 12.3oz (349g)
Features:
•Patented built-in non-contact IR Thermometer design with
laser pointer for locating hot spots
•True RMS CAT III-1000V, CAT IV-600V rated with
0.06% basic DCV accuracy
•Diode open circuit voltage of 2.8V DC
•Heavy duty Double molded, water resistant package
•Large backlit 40,000 count LCD with 40-segment bargraph
•Memory for storage and recall of three measurements
•1000V input protection on all functions
•Type K thermocouple contact temperature measurements
•Features include HOLD, RELATIVE and PEAK HOLD
•Min, Max and Average recording
•Auto power off with disable feature
•Capacitance, Frequency, Diode and Continuity functions
•Complete with double molded test leads, magnetic hanging
strap, general purpose Type K bead wire temperature probe,
case, and 9V battery
Ordering Information
EX570 ....................CAT IV Industrial MultiMeter + IR Thermometer
EX570-NISTL*........CAT IV Industrial MultiMeter + IR Thermometer w/NIST
*NISTL-Limited NIST for Certificate of Traceability to all functions except IR Thermometer
Accessories
TL810 ................Electrical Test Lead Kit
Patented
CAT IV Industrial MultiMeter + IR Thermometer
A. Built-in IR Thermometer quickly identifies hot
spots on electrical panels.
B. Measuring the internal temperature on a 3-phase
transformer installation
C. CAT IV application measuring voltage on a 480V
3-phase transformer
A
BC
