GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 107
Electrical 1 x 105at 5 A 240 VAC Res.
Operate Time (typical) 8 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 5000 Vrms coil to contact
(at sea level for 1 min.) 3000 Vrms between contact sets
1000 Vrms between open contacts
Insulation 1000 megohms min. at 20°C,
Resistance 500 VDC 50% RH
Dropout Greater than 30%
of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 70°C (158°F)
Storage -40°C (-40°F) to 105°C (221°F)
Vibration 0.062" DA at 10–55 Hz
Shock 10 g
Enclosure PC (94V-0)
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Weight 17 grams
CONTACTS
Arrangement DPDT (2 Form C)
Ratings Resistive load:
Max. switched power: 240 W, 2216 VA
Max. switched current: 8 A
Max. switched voltage: 150 VDC/400 VAC
Inductive load: (cosØ =0.4)
Max. switched power: 90W or 500VA
Max. Switched current: 5A
Max. switched voltage: 125VDC or 400 VAC
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Rated Load 8 A 277 VAC, resistive
UL, CUR 8 A 30 VDC resistive
1/3HP 240 VAC
TÜV 5 A at 250 VAC, resistive
5 A at 30 VDC, resistive
Material Silver cadmium oxide
Resistance 30 milliohms initially (6V, 1A method)
AZ723
8/21/02W
MINIATURE
POWER RELAY
FEATURES
•AC coils
•Dielectric strength 5000 Vrms
•Low cost
•Flux tight package
•8 Amp switching - double pole contacts
•Isolation spacing greater than 8mm
•Molded materials: all 94V-0
•UL, CUR file E43203
•TÜV file R50008783
COIL
Power
At Pickup Voltage 576 mW
(typical)
Max. Continuous 1.5 W at 20°C (68°F) ambient
Dissipation 1.2 W at 40°C (104°F) ambient
Temperature Rise 36°C (97°F) at nominal coil voltage
Temperature Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.