MICRO SWITCHTM Heavy-Duty Limit Switches HDLS Series Datasheet MICRO SWITCHTM HDLS Series Heavy-Duty Limit Switches Honeywell Sensing and Control's MICRO SWITCHTM heavy-duty limit switches' modular construction allows for a wide variety of actuator styles, operating heads, and electrical circuitry options. The plug-in versions greatly reduce downtime on production lines with high actuation rates as replacement of the switch is accomplished in seconds. The base receptacle contains all the wiring and conduit connection while the switching component with operating head easily assembles to the base and is attached with two screws. What makes our switches better? Industry-leading breadth-of-product offering: HDLS standard, HDLS harsh-duty epoxy sealed, or the HDLS stainless steel NEMA 1, 3, 4, 4X, 6, 6P, 12, 13 and IP65/66/67 environmental sealing for demanding applications UL, CSA, CE, and CCC approvals for global use Sintered bronze bearing on 303 stainless steel operating shaft for enhanced mechanical life (50 million actuation cycles) and operational reliability All-metal drive train for consistent operating characteristics, even at high temperature. Lasts longer (without need for frequent adjustment) than drive trains with plastic parts Exclusive teller tab ensures proper torque. When it cannot be moved, the lever is tight enough to prevent slippage RELIABILITY * DURABILITY MODULAR * GLOBAL 2 sensing.honeywell.com Features and Benefits SEALED TO NEMA 1, 3, 4, 4X, 6, 6P, 12, 13; IP 65/66/67 MICRO SWITCHTM HDLS limit switch NEMA/IP sealing features twin shaft seals for an extra measure of protection. They are ideal for many applications with demanding indoor and/or outdoor environments, where they may be subjected to shock or vibration from equipment, temperature extremes, dust, splashing water, coolant, and/or hose-directed water. Works the first time - every time WITHSTANDS MANY TOUGH ENVIRONMENTS Rugged, corrosion-resistant zinc head and body are phosphate treated and epoxy coated for indoor and outdoor applications. Diaphragm seal between head and body provides an extra measure of protection. Functions with exposure to severe temperatures, dust, dirt, grime, and caustic chemicals. Rapid customization and design-in time USED GLOBALLY Multiple connectivity options for international applications, as well as global approvals. Large, existing installation base and channel allows for quick delivery worldwide. UL, CSA, CE, and CCC approvals. OPTIONAL SEALS Fluorosilicone seals available for low temperature applications, and fluorocarbon seals available for chemically harsh environments and higher temperature applications. UNIQUE DESIGN FEATURES Keyed head design for secure head-to-body retention with the head in any one of four positions 90 apart. Self-lifting pressure plate terminals saves wiring time. DESIGN FLEXIBILITY Wide variety of actuators, switch options, and head styles for design flexibility. Rotary actuated heads are field adjustable for CW actuation, CCW actuation, or both to reduce inventory. EASILY CONTROLS LOW-VOLTAGE DC APPLICATIONS Limit switches available with a choice of silver or gold-plated contacts to handle a variety of electrical load requirements. INTERCHANGEABLE Plug-in and non plug-in bodies have identical operating characteristics and are dimensionally interchangeable to reduce complexity. Actuating levers for single and double pole, plug-in and non plug-in bodies provide same tracking and minimize inventory. sensing.honeywell.com 3 Potential Applications MACHINE TOOLS Determines part presence, machine slide position/stops, gates and doors AUTOMOTIVE MACHINE TOOLS Provides presence sensing on transfer machines, horizontal and vertical boring machines, stamping and forming equipment and automotive assembly line equipment MATERIAL HANDLING Used to position automated vehicle wash systems, overhead doors, garbage truck bodies, cranes, intermodal container handlers, gantry cranes, commercial aircraft boarding bridge OUTDOOR ELECTROMECHANICAL STRUCTURES End of travel indicator for equipment with moving components in harsh environments and remote locations, such as satellite and weather station arrays and solar energy harvesters BALERS/COMPACTORS Used as door interlocks for indoor and outdoor applications CONVEYORS Used for alignment/tracking, tensioning, and product/material presence FOOD AND BEVERAGE Used for process control, and packaging POWER PLANTS Used on conveyors, doors and gates OFF-ROAD EQUIPMENT Senses position of large components on wheeled or track equipment, motorized railroad switch, and rail locomotives AGRICULTURAL EQUIPMENT Grain handling and livestock equipment VALVES Indicates closed and/or open position TRANSPORTATION HUBS Commercial aircraft boarding bridge, commercial aircraft ground support equipment, intermodal container handlers, gantry cranes, shipboard conveyors, door/hatch position & valve position, railroad locomotives and rail maintenance equipment 4 sensing.honeywell.com MICRO SWITCHTM Heavy-Duty Limit Switches Figure 1. MICRO SWITCHTM HDLS SERIES FEATURES AND OPTIONS 303 stainless steel operating shaft on sintered bronze bearing for enhanced mechanical life and operational reliability. Dual bearings deliver enhanced mechanical life. Field adjustable operating head (CW and CCW, CW or CCW) matches switch to the application. Tracking interchangeability of actuator levers for singleand double-pole switches, plug-in and non-plug-in. Twin shaft seals for an extra measure of protection. Optional fluorocarbon or fluorosilicone seals. Exclusive teller tab ensures proper torque. When it cannot be moved, the lever is tight enough to prevent slippage. Boss-and-socket head design for secure head-to-body retention. Superior design of plug-in terminal between switch body and receptacle maintains electrical continuity in harsh conditions of temperature extremes, equipment vibration, and shock. Self-lifting pressure plate terminals save wiring time. Easily identified grounding terminal (inside) for compliance with regulatory standards. Diaphragm seal for exta measure of protection. Rugged, corrosionresistant zinc head and body are phosphate treated and epoxy coated. Unique, all-metal drive train for consistent operating characteristics even at high temperature; lasts longer (without the need for frequent adjustment) than drive trains with plastic parts. One piece flat gasket: seals better than gaskets that go around curves and corners. Does not contact the terminals pins to reduce possibility of fluid migration. Domestic and international conduit threads. Front mounting and interchangeability of single- and double-pole switches, plug-in and non-plug-in with one another and with other switch brands. Each switch has four mounting holes; two "through" holes for front mount, and two tapped holes in back for rear mount sensing.honeywell.com 5 HDLS Series Table 1. Specifications Characteristic Parameter MICRO SWITCHTM heavy-duty limit switches Product type Acutators Side plunger - adjustable Side roller plunger Top plunger - adjustable Top rotary Wobble - coil spring Side plunger - pin Side rotary Top plunger - pin Wobble - cable Wobble - plastic rod Circuitry 1NC 1NO SPDT snap action, double break 2NC 2NO DPDT center neutral, snap action, double break 2NC 2NO DPDT snap action, double break 2NC 2NO DPDT sequential, snap action, double break Electrical 10 A thermal Single and double pole: AC15 A600; DC13 R300 (see table on page 8) Housing material Termination types Housing type Zinc die-cast with an electrostatic epoxy coating 0.5 in - 14NPT conduit PG 13,5 conduit 4-pin mini-style connector 6 ft cable 0.75 in - 14NPT conduit 20 mm conduit 5-pin mini-style connector Manifold mounting 12 ft cable 4-pin micro-style connector 9-pin mini-style connector HDLS Plug-in, HDLS Non-Plug-in Sealing IP65/66/67; NEMA 1, 3, 4, 4X, 6, 6P, 12, 13 Operating temperature -12 C to 121 C [10 F to 250 F]; optional: -40 C to 121 C [-40 F to 250 'F] Agency approvals and standards UNSPSC code UNSPSC commodity Sealed 6 Side plunger maintained - pin Side rotary maintained Top roller plunger Wobble - cat whisker Wobble - spring wire sensing.honeywell.com UL, CE, CSA, CCC 302119 302119 Switches and controls and relays Industrial MICRO SWITCHTM Heavy-Duty Limit Switches MICRO SWITCHTM HDLS SERIES NOMENCLATURE A LS Switch Type HDLS Series Heavy-Duty Limit Switch * 3 or 4 after the "LS" indicates special metric conduit threads: 3 = PG 13,5 4 = 20 mm 1A Heads 1 Modification Codes Body/Basic Switch Codes Plug-in Single Pole Plug-in Double Pole A 4-pin mini-style PA B 5-pin mini-style XA 5-conductor STOOW-A cable, 8 ft 9-conductor STOOW-A cable, 8 ft C 5-conductor STOW-A cable, 6 ft PB 5-conductor STOOW-A cable, 30 ft Center neutral E 4-conductor SJTOW-A cable, 6 ft 1 Non-plug-in Double Pole Standard switch A Side rotary, momentary L Side rotary, sequential B Top rotary, momentary M Side rotary, center neutral 1A Standard switch 2B Standard switch 4L C Top plunger, plain N Side rotary, maintained 1E Gold contacts 2C Sequential 4M Sequential D Top roller plunger P Side rotary, momentary, low pretravel 1G manifold mount 2D Center neutral 4N E Side plunger plain, momentary R Side rotary, momentary, low torque 1H force F Side plunger roller, momentary S Side rotary, gravity return extr. low torque 5A G Side plunger plain, maintained T Side rotary, momentary, extr. low torque 8A indicator H Side rotary, momentary, low pretravel & torque U Side rotary, momentary, 5 max. pretravel 9A J Wobble stick V Top plunger, adjustable K Cat whisker W Side plunger, momentary, adjustable Gold contacts, Wobble Actuator 7A Wobble, plastic 7M Wobble, wire 7N Wobble, cable Clockwise head rotation 8A Cat whisker, 5.5 in steel Low 2R 120 V neon indicator 4S Standard switch golf contacts J 8-pin mini-style 2 Counterclockwise head rotation 8B Cat whisker, 7.5 in steel 120 V neon indicator 2S Standard switch golf contacts 4T Sequential, gold contacts M 9-conductor STOOW-A cable, 6 ft 3 Head assembled with actuator to right side 8C Coil spring, 5.5 in 240 V neon 2T Sequential, gold contacts 4U Center neutral, gold contacts P 5-conductor STOOW-A cable, 12 ft 4 Head assembled with actuator to left side 8D Cat whisker, plastic 24 V LED indicator 2U gold contacts Center neutral, 7L Standard switch, 1/2 in conduit R 9-pin mini-style 5 Head assembled with actuator to mounting surface 6B Standard switch, 1/2 in conduit 7M Sequential, 1/2 in conduit S 5-pin micro-style 6 Roller perpendicular to mounting surface 6C Sequential, 1/2 in conduit 7N Center neutral, 1/2 in conduit X 7 Indicator light wired to normally closed circuit 6D Center neutral, 1/2 in conduit 7S Stnd. switch, gold contacts, 1/2 in conduit 9-conductor STOOW-A cable, 12 ft 3-foot mini-style pigtail, single pole BB 8 Roller on side plunger in vertical position 7T Sequential, gold contacts, 1/2 in conduit DD with jumper 7U Center neutral, gold contacts, 1/2 in conduit Non-plug-in Single Pole 3K Standard switch NOTE: Not all combinations of model codes are available. Please contact your local Honeywell provider for assistance. - 120 V neon 6R indicator, 1/2 in conduit 6S 6T Stnd. switch, gold contacts, 1/2 in conduit Sequential, gold contacts, 1/2 in conduit 4-pin micro-style Center neutral, 6U gold contacts, 1/2 in conduit sensing.honeywell.com 7 HDLS Series ASSEMBLY MODIFICATIONS * ROTARY Momentary action rotary switches can be furnished in other than the normal assembled conditions. To specify modifications, add the numbers shown below to the catalog listings. Modification number suffixes are: 1 Clockwise actuation only 2 Counterclockwise actuation only 3 Shaft to right of switch front 4 Shaft to left of switch front 5 Shaft to back of switch 7 Indicator light wired to NC circuit For example, Catalog listing LSA1A23 is an LSA1A switch adjusted for counterclockwise actuation only. The operating shaft is to the right side of the switch when viewing it from the front (label side). No lever. Catalog listing LSA8A7 is an LSA8A switch with the 240 volt indicator light wired to the NC circuit. No lever. PLUNGER ASSEMBLY MODIFICATIONS Add the following modification numbers to the catalog listing in the plunger switch: 3 Side plunger to right of switch front 4 Side plunger to left of switch front 5 Side plunger to back of switch 6 Roller on top plungers perpendicular to mounting surface 7 Light on indicator versions wired to NC circuit 8 Roller on side plungers in vertical position For example, Catalog listing LSF1A3 is an LSF1A switch with the side roller plunger to the right side. PLUG-IN VS. NON-PLUG-IN MODELS Honeywell HDLS limit switches are offered in two styles: non-plugin design and plug-in design. With plug-in construction, the wiring and conduit connection is made to the base receptacle. This feature reduces downtime as the plug-in unit can be removed and replaced without disconnecting the wiring or conduit connections to the switch. 8 sensing.honeywell.com MICRO SWITCHTM HDLS SERIES ELECTRICAL RATINGS: 10 A CONTINUOUS CARRY AC VOLTS; PILOT DUTY: AC15, A600/B600 Electrical Circuitry Rating A* AC15, A600 B AC15, B600 Vac Amps at 0.35 Power Factor Make Amps at 0.35 Power Factor Break 120 60 6 240 30 3 480 15 1.5 600 12 1.2 SPDT DPDT D 120 30 3 240 15 1.5 480 7.5 0.75 600 6 0.60 D Gravity return (Model LSS..) and extra-low torque (Model LST..) MICRO SWITCHTM HDLS SERIES ELECTRICAL RATINGS: DC VOLTS; PILOT DUTY: DC13, R300 Electrical Rating Circuitry Vdc Make & Break Amps Inductive Make & Break Amps Resistive A, B* SPDT DPDT 120 0.25 0.8 240 0.15 0.4 * For switches with an indicator light, use only at voltage stated for indicator light. MICRO SWITCHTM HDLS limit switches are capable of the following low voltage dc loads Circuitry Vdc Amps Inductive Amps Resistive SPDT 24 10 10 DPDT 24 10 10 MICRO SWITCHTM Heavy-Duty Limit Switches MICRO SWITCHTM HDLS SERIES OPERATING HEADS SIDE ROTARY: Available levers provide greater versatility. Heads may be positioned with shaft on any side. All are momentary action TOP ROTARY: Available levers provide greater versatility. Heads may be positioned with shaft on any side. All are momentary action except maintained head (LSN Series). except maintained head. LSA - Standard: 60 minimum overtravel, 15 maximum pretravel, 5 (single pole) and 7 (double pole) maximum differential travel. Operating temperature range from -12 C to 121 C [10 F to 250 F].* LSR - Low operating torque: 60 minimum overtravel, 15 maximum pretravel, 0.19 Nm [1.7 in lb] maximum operating torque. Operating temperature range from -1 C to 121 C [250 F to 250 F].* LSN - Maintained contact: Maintained on counterclockwise rotation and reset on clockwise rotation, and vice versa. Operating temperature range from -1 C to 121 C [30 F to 250 F]. LSP - Low differential: 68 minimum overtravel, 7 maximum pretravel, 3 (single pole) and 4 (double pole) maximum differential travel. Operating temperature range from -12 C to 121 C [10 F to 250 F].* LSH - Low torque, low differential travel: 68 minimum overtravel. Features low operating torque and narrow differential travel. Operating temperature range from -1 C to 121 C [30 F to 250 F].* LSU - Low pretravel: 5 max. pretravel, 70 min. overtravel, and a second step of 18 max. Operating temperature range from -12 C to 121 C [10 F to 250 F].* LSL - Sequence action: 48 minimum overtravel. Delayed action between operation of two poles. Operating temperature range from -12 C to 121 C [10 F to 250 F].* LSM - Center neutral: 53 minimum overtravel. One set of contacts operates on the clockwise rotation, and another set on the counterclockwise rotation. Operating temperature range from -1 C to 121 C [30 F to 250 F].* LST - Momentary action with extra low torque: 12 in oz of operating and full travel torque with momentary action. Operating temperature range from -12 C to 121 C [10 F to 250 F].* LSB: With 100 minimum overtravel. Various levers that fit side rotary shafts may be used on the top rotary shaft. Switch is ideal when increased overtravel is required. Momentary action. Standard operating temperature range from -1 C to 121 C [30 F to 250 F].* TOP PLUNGERS: Available with 4,83 mm [0.19 in] minimum overtravel. Top pin plungers are offered in pin plunger, an adjustable plunger, and a roller plunger. Standard temperature range of -12 C to 93 C [10 F to 200 F]. LSC - Top pin plunger: A corrosionresistant steel plunger for in-line actuating motion. Oil-tight seals on plunger and between the operating head and housing keep out coolant, dust, and chips. Momentary action. LSD - Top roller plunger: A corrosionresistant steel roller and plunger that is adjustable to 90 angles to accept cam or slide operation from any of two directions. Boot seal on the plunger. Momentary action LSV - Adjustable top pin plunger: Provides easy application and saves on installation time. The operating points of the switch can be adjusted from 52,8 mm to 59,3 mm [2.085 in to 2.335 in]. Seals are the same as the pin plunger. Momentary action. LSS - Gravity return: Has no return spring mechanism so weight of the lever must provide the return force. Extremely light operating torque (5 in oz max.) is useful in conveyor applications and can be operated by small or lightweight objects. Operating temperature range from -1 C to 121 C [30 F to 250 F].* *(Fluorocarbon seals are preferred for temperatures above 93 C [200 F]). sensing.honeywell.com 9 HDLS Series MICRO SWITCHTM HDLS SERIES OPERATING HEADS SIDE PLUNGERS: Available with 4,83 mm [0.19 in] minimum overtravel. Side plungers are offered in plain plunger, an adjustable plain plunger, a roller plunger, and a maintained plunger. Standard temperature range of -12 C to 93 C [10 F to 200 F]. LSE - Side pin plunger: For actuating motion inline with the plunger travel. Actuating head may be faced in any of four positions, 90 apart. A boot seal on the plunger and a gasket seal between the head and housing keep out coolant, dust, and chips. Momentary action. LSW - Adjustable side pin plunger: Has the same features of the side plain plunger plus the means to adjust the operating points of the switch from 41 mm to 47,4 mm [1.615 in to 1.865 in]. Momentary action. LSG - Maintained contact side pin plunger: Offers a maintained contact on actuation of the switch. A reverse motion of the plunger resets the switch. Sealing is the same as other side plunger actuation heads. Operating temperature range is -1 C to 93 C [30 F to 200 F]. LSF - Side roller plunger: Fits close quarters under cams and slides. The head may be faced in any of four positions, 90 apart. The roller can be turned vertical or horizontal to the switch. Boot seal on plunger. Momentary action. WOBBLE LEVER ACTUATING HEADS: Heads come with either a spring wire, Delrin(R) plastic rod, or steel cat whisker. Any movement of the lever (except pull) will actuate the switch. Standard temperature range of -12 C to 93 C [10 F to 200 F]. LSJ1A-7M - Spring wire: 300 Series SST wire may be formed for special applications. LSJ1A-7N - Flexible actuator: Designed with a tin-plated cable. LSK1A-8C - Coil spring: Designed with a 300 Series SST coil spring. LSJ1A-7A - Plastic rod: Recommended where possible scratching or marring by the actuator is to be avoided. LSK1A-8A - Cat whisker: 300 Series SST actuator designed for low operating force applications. *(Fluorocarbon seals are preferred for temperatures above 93 C [200 F]). 10 sensing.honeywell.com MICRO SWITCHTM Heavy-Duty Limit Switches SPECIAL OPTIONS LOW TEMPERATURE SWITCHES HIGH TEMPERATURE/CHEMICAL RESISTANT SWITCHES All forms of HDLS limit switches are also available in low-temperature construction. Design features include fluorosilicone diaphragm, shaft seals, and external booth seal (where applicable). If pre-wired with a cable, low temperature limits are -10 C [14 F] flex and -30 C [-22 F] non-flex. Completely fluorocarbon (FC)-sealed switches have a full FC body gasket coving the switch cavity. Rotary types have an extra FC seal on the operating shaft, while plunger versions have FC boot seals. They are for use in many applications where the environment includes fire-resistant synthetic fluids. In addition to most all fluids, the FC-sealed switches may be used with such industrial fluids such as Cellulube, Fyrquell, Houghto-Safe, Pydraul, and other special cutting and hydraulic fluids. The additional FC seals also promote longer operating life for rotary-actuated HDLS switches in applications where the temperatures are normally -12 C to 121 C [10 F to 250 F]. If pre-wired with cable, then temperature limits are 105 C [221 F] dry and 60 C [140 F] wet. To order, insert the additional letters Y and B in the appropriate places in the standard catalog listing, as shown below: LSA1A standard, side-rotary plug-in switch LSYAB1A low-temperature version of LSA1A CONDUIT OPENINGS For conduit openings other than 1/2-NPT and 3/4-NPT, subsitute the following after LS in the catalog listing: LS3 PG13,5 LS4 20 mm To order, insert the additional letters Y and C in the appropriate places in the standard catalog listing, as shown below: LSA1A standard, side-rotary plug-in switch LSA1A side rotary with 1/2-14 NPT conduit LSYAC1A completely FC-sealed version of LSA1A LS4A1A side rotary with 20 mm conduit TEMPERATURE LIMITS Standard HDLS Low Limit -12 C [10 F] LSA - Side Rotary Momentary High Limit -1 C [30 F] 93 C [200 F] X X LSB - Top Rotary Low Temperature HDLS (Fluorosilicone Sealed): Y_B Low Limit 121 C [250 F] -40 C [-40F] X X X High Temperature HDLS (Fluorocarbon Sealed)*: Y_C High Limit -29 C [-20 F] 93 C [200 F] X Low Limit 121 C [250 F] -12 C [10 F] X X X High Limit -1 C [30 F] 121 C [250 F] X X X LSC - Top Plain Plunger X X X X X X LSD - Top Roller Plunger X X X X X X LSE - Side Plain Plunger X X X X X X LSF - Side Roller Plunger X X X X X X LSG - Side Plunger, Maintained X LSH - Side Rotary, Low PT, Low Torque X X X X LSJ - Wobble Stick X X LSK - Cat Whisker X X LSL - Side Rotary, Sequence X X X X X X X LSN - Side Rotary, Maintained X X X X X LSR - Side Rotary, Low Torque X X LSM - Side Rotary, Center Neutral LSP - Side Rotary, Low Pretravel X X X X X X X LSV - Top Adjustable Plunger X X X LSW - Side Adjustable Plunger X X X X X X X X X X X X X X X X X X X X X X X X X X LSU - 5 Low Pretravel X X X X X X X X X X X X X * For HDLS application wherein the upper temperature limit is normally above 93 C [200 F], much longer switch life can be obtained by using completely fluorocarbon-sealed switches rather than standard HDLS. sensing.honeywell.com 11 HDLS Series FACTORY SEALED PRE-WIRED LIMIT SWITCHES WIRING DIAGRAMS (STYLES B&G) Features * Pre-wired with 6 ft STOOW-A cable or other 4, 5, or 9-pin connectors (other lengths available * Wire entry area completely factory sealed * (Cable version) NEMA 1, 6, 6P, 12; IP67 * (Connector version) NEMA 1, 6, 6P, 12, 13; IP67 Connectors = Numbers (mini-style) Cables = Colors WHITE RED 2 Cable 1/2 in connector style C A (4-pin mini-style) B (5-pin mini-style) DD (4-pin micro-style) SPDT M DPDT BLACK 5 1 5 ORANGE 4 3 How to order: To order factory sealed switches, add the modification codes shown below to the standard HDLS listings: Circuitry Single-Pole Circuitry SINGLE POLE CABLE OR MINI STYLE CONNECTOR DOUBLE POLE CABLE OR MINI STYLE CONNECTOR 2 GREEN RED ORANGE RED 1 3 2 3 2 4 1 WIRING DIAGRAM (STYLE DD) 4 1 2 Pin 3 not connected 12 sensing.honeywell.com 2 1 3 4 1 7 2 8 5 9 3 YELLOW M&R) BLUE 6 4 WHITE PINK BROWN GREEN GREEN 4 Ground BLACK SINGLE POLE Examples: CABLE OR MINI STYLE CONNECTOR WIRING DIAGRAMS (STYLES LSA1AC = LSA1A with 6 feet of 5-conductor STOW-A cable WHITE BLACK LSJ2BM-7N = LSJ2B-7N with 6 feet of 9-conductor STOOW-A 1 5 RED ORANGE cable 4 2 DOUBLE POLE LSA1AB = LSA1A with a 5-pin mini-style connector 3 CABLE OR MINI STYLE CONNECTOR LSA1ADD = LSA1A with a 4-pin micro-style connector WIRING DIAGRAM (STYLE A) 4 GREEN ORANGE 3= R (9-pin mini-style) NOTE: Connector versions available with 1/2 in conduit only. 1 1 7 2 BLACK 8 5 9 WHITE PINK 4 3 YELLOW BLUE 6 BROWN Double-Pole Circuitry 8 9 4 3 2 1 5 6 7 = Ground MICRO SWITCHTM Heavy-Duty Limit Switches SIDE ROTARY * MICRO SWITCHTM HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS Standard (LSA) Snap Action 2NO/2NC Snap Action 1NO/1NC Snap Action 2NO/2NC Snap Action 1NO/1NC Snap Action 2NO/2NC 3 1 4 2 3 1 4 2 3 1 3 1 3 1 3 1 4 2 1-2 3-4 3-4 1-2 7 5 8 6 7 5 8 6 SPDT 75 2 0 5 5 9 75 4 2 1-2 3-4 3-4 1-2 1-2 3-4 3-4 1-2 0 5 DPDT 75 75 15 max. 15 max. 9 max. 9 max. 5 max. 5 max. Different. travel 5 max. 7 max. 3 max. 4 max. 3 max. 4 max. Overtravel 60 min. 60 min. 66 min. 66 min. 70 min. 70 min. Oper. torque 0,45 Nm [4 in-lb] max. 0,45 Nm [4 in-lb] max. 0,45 Nm [4 in-lb] max. CW & CCW (Momentary) -12 C to 121 C [10 F to 250 F] (for low temp, high temp, or preleaded versions, see pages 11-12) Contacts Body Style Conduit (NPT) Silver Plug-in 0.5 in LSA1A LSP1A LSU1A Gold4 Plug-in 0.5 in LSA1E LSP1E LSU1E Silver Plug-in 0.5 in 120 V Ind. lite 1 LSA5A LSP5A LSU5A Silver Plug-in 0.5 in 240 V Ind. lite1 LSA8A LSP8A LSU8A 0.5 in 24 V LED 1.5 mA max. auto polarity1 LSA9A LSP9A LSU9A Silver 2 Plug-in Options Silver Non-plug-in 0.5 in LSA3K LSP3K LSU3K Silver Plug-in 0.75 in LSA2B LSP2B LSU2B 4 Gold Plug-in 0.75 in LSA2S - - Silver Plug-in 0.5 in LSA6B LSP6B LSU6B Gold4 Plug-in 0.5 in Silver Plug-in 0.75 in Silver Non-plug-in Silver Non-plug-in DPDT Double Break 1 Pretravel Op. temp range3 DPDT 8 6 75 Action 0 SPDT 4 2 7 5 6 9 Contact closed n Contact open o SPDT Double Break 4 2 8 15 75 0 DPDT 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 10 SPDT 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 DPDT 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 SPDT 0 Low pretravel Snap Action 1NO/1NC 15 Low pretravel & low differential travel 0 5 Pretravel (LSU) Standard Description Circuitry Low Differential (LSP) LSA6S - - LSA2R LSP2R LSU2R 0.75 in LSA4L LSP4L LSU4L 0.5 in LSA7L LSP7L LSU7L 120 V Ind. lite1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93 C [200 F] 2 Plug-in listings include base receptacle 3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 C [200 F] 4 Gold-plated contacts 1 NOTE: Same polarity each pole. To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch. sensing.honeywell.com 13 HDLS Series SIDE ROTARY * MICRO SWITCHTM HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS Description Low Torque (LSR) Low Diff., Low Torque (LSH) Low operating torque Low pretravel and low torque SPDT Snap Action 2NO/2NC 3 1 4 2 3 1 4 2 3 1 3 1 4 2 7 5 8 6 7 5 8 6 10 0 75 SPDT DPDT DPDT Double Break 1-2 3-4 3-4 1-2 75 15 max. 15 max. 9 max. 9 max. 5 max. 7 max. 3 max. 4 max. Overtravel 60 min. 60 min. 66 min. 66 min. 0,19 Nm [1.7 in-lb] max. 0,19 Nm [1.7 in-lb] max. CW & CCW (Momentary) Op. temp range Different. travel 3 SPDT Double Break 5 9 75 Action 0 Pretravel Oper. torque 9 Contact closed n Contact open o 6 8 15 75 0 4 2 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 Snap Action 1NO/1NC 15 Circuitry DPDT Snap Action 2NO/2NC 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 0 DPDT 1-2 3-4 3-4 1-2 SPDT Snap Action 1NO/1NC -1 C to 121 C [30 F to 250F] (for low temp, high temp, or preleaded versions, see pages 11-12) Contacts Body Style2 Conduit (NPT) Options Silver Plug-in 0.5 in 4 Gold Plug-in 0.5 in LSR1E LSH1E Silver Plug-in 0.5 in 120 V Ind. lite1 LSR5A LSH5A Silver Plug-in 0.5 in 240 V Ind. lite1 LSR8A LSH8A 24 V LED 1.5 mA max. auto polarity1 LSR9A LSH9S LSR1A LSH1A Silver Plug-in 0.5 in Silver Non-plug-in 0.5 in LSR3K LSH3K Silver Plug-in 0.75 in LSR3B LSH2B Silver Silver Silver Silver Plug-in 0.5 in LSR6B LSH6B Plug-in 0.75 in LSR2R LSH2R Non-plug-in 0.75 in LSR4L LSH4L Non-plug-in 0.5 in LSR7L LSHJ7L 120 V Ind. lite1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93C [200 F] Plug-in listings include base receptacle 3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 C [200 F] 4 Gold-plated contacts 1 2 NOTE: Same polarity each pole. To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch. 14 sensing.honeywell.com MICRO SWITCHTM Heavy-Duty Limit Switches SIDE ROTARY * MICRO SWITCHTM HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS Maint. Contact (LSN) Center Neutral (LSM) Sequence Action (LSL) Maint. 360 Alt. Action Maintained, 2-pos1,2. Std. Center Neutral (Pole 1 operates CCW; Pole 2 operates CW) Sequential (Pole 1 operates before Pole 2, either CW, CCW, or both) DPDT DPDT SPDT DPDT Maintained Contact 3 4 2 1-2 3-4 3 1 0 4 2 1-2 3-4 3-4 1-2 0 4 1 2 7 8 5 6 Maintained Contact 0 75 0 0 8 18 7-8 5-6 3-4 1-2 3 1 1-2 3-4 5-6 7-8 SPDT Maintained Contact 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 Description Maint. Contact (LSQ) 10 15 20 25 90 8 65 0 85 SPDT SPDT Double Break DPDT 85 65 max. 65 max. 18 max. Pole 1: 15 Pole 2: add'l 10 Different. travel 40 max. 40 max. 10 max. each pole: 5 Overtravel 20 min. 20 min. Op. temp range6 75 75 Pretravel 0,45 Nm [4 in-lb] Action 0 65 5-6 7-8 7-8 5-6 270 Oper. torque Circuitry 18 1-2 3-4 3-4 1-2 Contact closed n Contact open o 25 25 180 57 min. 48 min. 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] CW & CCW (Momentary) Maintained -1 C to 121 C [30 F to 250F] (for low temp, high temp, or preleaded versions, see page 11-12) -12 C to 121 C [10 F to 250F] (for low temp, high temp, or preleaded versions, see page 11-12) Contacts Body Style5 Conduit (NPT) Options Silver Plug-in 0.5 in 3 Gold Plug-in 0.5 in - LSN1E Silver Plug-in 0.5 in 120 V Ind. lite4 - LSN5A Silver Plug-in 0.5 in 240 V Ind. lite4 - LSN8A Silver Non-plugin 0.5 in - LSN3K Silver Plug-in 0.75 in - LSN2B LSM2D LSL2C Silver Plug-in 0.5 in - LSN6B LSM6D LSL6C LSQ300 LSN1A POLE 1 POLE 2 Gold Plug-in 0.5 in - - LSM6U - Silver Non-plugin 0.75 in - LSN4L LSM4N LSL4M Silver Non-plugin 0.5 in - LSN7L LSM7N LSL7M DPDT Double Break 3 Mechanical trip before electrical trip. Total travel is approximately 80 max. Maintained contact switch normally used with LSZ53 yoke actuator. 3 Gold-plated contacts 4 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93C [200 F]. 5 Plug-in listings include base receptacle 6 Completely fluorocarbon-sealed switches are preferred for temperatures above 93 C [200 F]. 1 2 NOTE: Same polarity each pole. To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch. sensing.honeywell.com 15 HDLS Series Figure 2. MICRO SWITCHTM HDLS side rotary (single pole) dimensions Figure 3. MICRO SWITCHTM HDLS side rotary (double pole) dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 39,6 [1.56] 62,0 [2.44] 14,7 [.58] 19,0 [.75] MTG PADS 19,0 [.75] 7,32 [.29] 59,4 [2.34] 119 [4.69] 70,4 [2.77] 59,4 [2.34] 18,8 [.74] 29,4 [1.16] 41,1 [1.62] 16,5 [.65] 25,4 [1.00] 44,5 [1.75] CONDUIT OPENING LOCATION 2X 5,2 [.20] O MTG HOLES 26,4 [1.04] 2X 10-32 UNF TAPPED FROM REAR ONLY DIMS: MM [IN] 29,4 [1.16] 47,8 [1.88] 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH 45,3 [1.78] DIMS: MM [IN] LSA DPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) SPDT PLUG-IN PRODUCT DIMENSIONS SPDTLSA Non-plug-in (FOR REFERENCE ONLY) (mm[in]) DPDT Non-plug-in (mm[in]) 39,6 [1.56] 39,6 [1.56] 62,0 [2.44] 14,7 [0.58] MTG PADS 82,6 [3.53] 89,5 [3.53] 74,9 [2.95] CONDUIT OPENING LOCATION 14,7 [.58] MTG PADS 7,32 [.29] 106,7 [4.20] 39,6 [1.56] 62,0 [2.44] 19,05 [.75] 14,7 [.58] 19,0 [.75] MTG PADS 7,32 [.29] 119 [4.69] 59,5 [2.34] 70,4 [2.77] 75,9 [2.97] 20,3 [0.8] CONDUIT OPENING LOCATION 36,6 [1.44] 29,4 [1.16] 41,1 [1.62] 44,5 [1.75] DIMS: MM [IN] LSA SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 16 sensing.honeywell.com 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] O MTG HOLES 59,4 [2.34] 82,6 [3.25] 89,7 [3.53] 21,3 [.84] CONDUIT OPENING LOCATION 29,4 [1.16] 38,1 [1.50] 45,3 [1.78] DIMS: MM [IN] LSA DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 47,8 [1.88] 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH MICRO SWITCHTM Heavy-Duty Limit Switches TOP ROTARY * MICRO SWITCHTM HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS Top Rotary (LSB) Increased overtravel (100 min.). Uses same levers as side rotary SPDT DPDT Snap Action 1NO/1NC Snap Action 2NO/2NC 3 1 4 2 3 1 4 2 1-2 3-4 3-4 1-2 7 5 8 6 0 15 25 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 Description 0 13 25 135 Contact closed n Contact open o Pretravel 135 25 max. 10 max. 12 max. Overtravel 110 min. 110 min. Op. temp range3 SPDT SPDT Double Break DPDT 25 max. Different. travel 0,28 Nm [2.5 in lb] max. Oper. torque Circuitry -12 C to 121 C [10 F to 250 F] (for low temp, high temp, or preleaded versions, see pages 11-12) Contacts Body Style2 Conduit (NPT) Options Silver Plug-in 0.5 in 4 Gold Plug-in 0.5 in LSB1E - Silver Plug-in 0.5 in 120 V Ind. lite1 LSB5A - Silver Plug-in 0.5 in 240 V Ind. lite1 LSB8A - Silver Plug-in 0.5 in 24 V LED 1.5 mA max. auto polarity1 LSB9A - Silver Non-plug-in 0.5 in LSB3K - Silver Plug-in 0.75 in - LSB2B Silver Plug-in 0.5 in - LSB6B Silver Plug-in 0.75 in - LSB2R LSB1A - Silver Non-plug-in 0.75 in - LSB4L Silver Non-plug-in 0.5 in - LSB7L DPDT Double Break 120 V Ind. lite1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93 C [200 F] Plug-in listings include base receptacle Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 C [200 F] 4 Gold-plated contacts 1 2 3 NOTE: Same polarity each pole. To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch. sensing.honeywell.com 17 HDLS Series Figure 4. MICRO SWITCHTM HDLS top rotary (single pole) dimensions Figure 5. MICRO SWITCHTM HDLS top rotary (double pole) dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 21,6 [.85] MTG PADS 21,6 [.85] 39,6 [1.56] O 7,4 DIA. [O 0.29] DIA. 57,2 [2.25] 127.6 [5.02] 36,4 [1.43] 39,8 [1.56] 7,32 DIA [.29] MTG PADS 57,2 [2.25] 42,4 [1.67] 36,4 [1.43] 42,4 [1.67] 139,8 [5.5] 59,4 [2.34] 74,9 [2.95] 16,5 [.65] 25,4 [1.00] 39,1 [1.54] CONDUIT OPENING LOCATION 29,4 [1.16] 21.6 [.85] 39,6 [1.56] 36,4 [1.43] 127,6 [5.02] 36,4 [1.43] 42,4 [1.67] 139.8 [5.5] 59,4 [2.34] 29,4 [1.16] 41,1 [1.62] 20,3 [.80] 36,6 [1.44] CONDUIT OPENING LOCATION 70,4 [2.77] 44,4 [1.75] DIMS: MM [IN] LSB SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) sensing.honeywell.com 2X 5,2 [.20] O MTG HOLES 2X 10-32 UNF TAPPED FROM REAR ONLY 39.8 [1.56] 7,32 DIA [.29] MTG PADS 7,4 DIA [.29] 75,8 [2.98] 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH LSB DPDT PLUG-IN PRODUCT DIMENSIONS 57,2 [2.25] 18 2X 10-32 UNF TAPPED FROM REAR ONLY DIMS: MM [IN] DPDT (FOR Non-plug-in REFERENCE ONLY) (mm[in]) 21,6 [.85] 39,0 [1.54] 47,8 [1.88] 45,3 [1.78] CONDUIT OPENING LOCATION 2X 10-32 UNF TAPPED FROM REAR ONLY LSB SPDT PLUG-IN PRODUCT DIMENSIONS SPDT Non-plug-in (mm[in]) (FOR REFERENCE ONLY) MTG PADS 29,4 [1.16] 26,4 [1.04] 2X 5,2 [.20] O MTG HOLES DIMS: MM [IN] 82,6 [3.25] 18,8 [.74] 41,1 [1.62] 44,4 [1.75] 59,5 [2.34] 89.7 [3.53] 70,4 [2.77] 59,5 [2.34] 89.7 [3.53] 21,3 [.84] 38,1 [1.50] CONDUIT OPENING LOCATION 42,4 [1.67] 82.6 [3.25] 29,4 [1.16] 45,3 [1.78] DIMS: MM [IN] LSB DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 47.8 [1.88] 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH 36,4 [1.43] MICRO SWITCHTM Heavy-Duty Limit Switches Table 2. Common levers for use with MICRO SWITCHTM HDLS Rotary Switches Levers for use with side or top rotary actuated switches are available in a wide choice of sizes and materials. The most common listings are shown below. Rollers may be on either side of the lever to best match the external acutating mechanism. LSZ51A&C fixed rotary lever, nylon roller, front/ backl LSZ55A,LSZ55B, LSZ55C,LSZ55D offset lever, front/back LSZ52A, LSZ52B, LSZ52C, LSZ52D adj. lever, nylon/ steel, front/back LSZ51B&D fixed rotary lever, steel roller, front/ back LSZ60 one-way roller lever LSZ52J adjustable lever, nylon roller O 25,4 mm [O 1 in] LSZ59A,LSZ59B, LSZ59C,LSZ59D LSZ69CA spoke lever - 152 mm [6 in] short fixed lever, front/back LSZ53A, LSZ53B, LSZ53C, LSZ53D yoke lever, nylon and steel rollers, front/back placement LSZ52K adjustable lever, nylon roller O 38,1 mm [O 1.5 in] LSZ54M aluminum rod O 140 mm [O 5.5 in] LSZ54R spring wire 305 mm [12 in] LSZ61 loop 152 mm [6 in] LSZ67AA* Plastic conveyor roller LSZ68 rod w/ spring 305 mm [12 in] LSZ54N stainless steel rod 330 mm [13 in] * May require orientation of switch and lever to enable gravity to help restore free position of switch. sensing.honeywell.com 19 HDLS Series Table 3. HDLS SERIES ACTUATOR CODE TABLE (see previous page) Catalog Listing Material Rod/Roller Rod/Roller Roller Dia. mm Width mm Mounting [in] [in] Fixed 38,1 mm [1.5 in] radius - Rollerless n/a n/a n/a LSZ51A Nylon 19 [0.75] 6,35 [0.25] Front LSZ51B Steel 19 [0.75] 6,35 [0.25] Front LSZ51C Nylon 19 [0.75] 6,35 [0.25] Back LSZ51D Steel 19 [0.75] 6,35 [0.25] Back LSZ51F Nylon 25,4 [1.0] 12,7 [0.50] Front LSZ51G Nylon 38,1 [1.5] 6,35 [0.25] Front LSZ51J Nylon 25,4 [1.0] 12,7 [0.50] Back LSZ51L Ball bearing 19 [0.75] 6,35 [0.25] Back LSZ51M Nylon 19 [0.75] 31,7 [1.25] Back LSZ51N Steel 19 [0.75] 31,7 [1.25] Front LSZ51P Nylon 19 [0.75] 12,7 [0.50] Front Adjustable 38,1 mm to 89,0 mm [1.5 in to 3.5 in] radius - Rollerless n/a n/a n/a LSZ52A Nylon 19 [0.75] 6,35 [0.25] Back LSZ52B Steel 19 [0.75] 6,35 [0.25] Back LSZ52C Nylon 19 [0.75] 6,35 [0.25] Front LSZ52D Steel 19 [0.75] 6,35 [0.25] Front LSZ52E Nylon 19 [0.75] 33,0 [1.30] Front LSZ52J Nylon 25,4 [1.0] 12,7 [0.50] Front LSZ52K Nylon 38,1 [1.5] 6,35 [0.25] Front LSZ52L Ball bearing 19 [0.75] 6,35 [0.25] Front LSZ52M Nylon 50,8 [2.0] 6,35 [0.25] Front LSZ52N Nylon 19 [0.75] 12,7 [0.50] Front Yoke - 38,1 mm [1.5 in] radius LSZ53A Nylon 19 [0.75] LSZ53B Steel 19 [0.75] LSZ53D Steel 19 [0.75] LSZ53E Nylon 19 [0.75] LSZ53M Nylon 19 [0.75] LSZ53P LSZ53S Rod - 6,35 [0.25] 6,35 [0.25] 6,35 [0.25] 6,35 [0.25] 31,7 [1.25] Front/Back Front/Back Front/Front Back/Front Back/Front Catalog Listing Rod/Roller Dia. mm [in] Fixed 38,1 mm [1.5 in] radius - Rollerless n/a LSZ55A Nylon 19 [0.75] LSZ55B Steel 19 [0.75] LSZ55C Nylon 19 [0.75] LSZ55D Steel 19 [0.75] LSZ55E Nylon 19 [0.75] LSZ55K Nylon 38,1 [1.5] Short fixed - 33 mm [1.3 in] radius LSZ59A Nylon 19 [0.75] LSZ59B Steel 19 [0.75] LSZ59C Nylon 19 [0.75] LSZ59D Steel 19 [0.75] Rod/Roller Width mm [in] Roller Mounting n/a 6,35 [0.25] 6,35 [0.25] 6,35 [0.25] 6,35 [0.25] 12,7 [0.50] 6,35 [0.25] n/a Back Back Front Front Front Front 6,35 [0.25] 6,35 [0.25] 6,35 [0.25] 6,35 [0.25] Front Front Back Back 38,1 mm [1.5 in] radius one-way roller lever LSZ60A Nylon 19 [0.75] 6,35 [0.25] LSZ60B Steel 19 [0.75] 6,35 [0.25] Front Front Flexible loop LSZ61 O 4,8 [O 0.19] 152 mm [6 in] flexible loop Nylatron LSZ618 O 4,8 [O 0.19] 241 mm [9.5 in] flexible loop Nylatron LSZ54 Hub only n/a n/a n/a Steel Nylon 19 [0.75] 19 [0.75] 6,35 [0.25] 6,35 [0.25] Back/Back Back/Back Hub only n/a n/a n/a LSZ54M Alum, 140 mm [5.5 in] O 3,2 [O 0.125] n/a n/a LSZ54N Stainless, 330 O 3,2 mm [13 in] [O 0.125] n/a n/a LSZ54R SST spring wire, 305 mm [12 in] Flex cable (tin plated steel), 122 mm [4.8 in] Plastic rod, 305 mm [12 in] Plastic rod, 183 mm [7.2 in] 330 [13] stainless steel O 1,9 [O 0.075] n/a n/a O 4,8 [O 0.19] n/a n/a O 6,85 [O 0.27] n/a n/a O 6,85 [O 0.27] n/a n/a 38,1 mm [1.5 in] radius (offset) O 4,8 [O 0.19] n/a n/a 38,1 mm to 89,0 mm [1.5 in to 3.5 in] radius 3,2 [0.125] n/a n/a LSZ54V LSZ54P LSZ54W LSZ59T Spoke LSZ69CA 152 mm [6.0 in] Stainless Material Spring rod LSZ68 LSZ617 LSZ686 Delrin rod, 305 [12 ] Delrin rod, 406 [16] Delrin rod, 152 [6] Rubber roller levers LSZ51Y Rubber O 6,35 [O 0.25] O 6,35 [O 0.25] O 6,35 [O 0.25] n/a n/a n/a n/a n/a n/a 50 [2.0] 12,7 [0.50] front Rubber 50 [2.0] 12,7 [0.50] front Rubber 50 [2.0] 12,7 [0.50] front 38,1 [1.5] 96,5 [3.8] 38,1 mm [1.5 in] radius (std.) LSZ55Y LSZ52Y (adjustable) Plastic roller levers LSZ67AA* Plastic (conveyor) n/a * may require orientation of switch and lever to enable gravity to help restore free position of switch. 20 sensing.honeywell.com MICRO SWITCHTM Heavy-Duty Limit Switches MICRO SWITCHTM HDLS SIDE ROTARY LEVERS' CAM TRACKING Levers for side and top rotary switches are normally ordered as separate catalog listings. They also may be ordered by including a suffix to the switch catalog listing (see nomenclature tree in this document) and adding the lever price. LSZ51 TYPE LEVERS CAM TRACKING Figure 6. LSZ51 type levers cam tracking Figure 7. LSZ52 type levers cam tracking 57,4 - 63,8 [2.26 - 2.51] ADJUSTMENT LEVER INVERTED 51,0 - 57,4 [2.01 - 2.26] ADJUSTMENT 6,35 mm x 19,0 mm dia [0.25 in x 0.75 in dia] OR 56,4 mm to 62,7 mm [2.22 in to 2.47 in] adjustment 58,9 - 65,3 [2.32 - 2.57] ADJUSTMENT 6,35 mm x 38,1 mm dia [0.25 in x 1.5 in dia] OR 42,9 - 49.3 [1.69 - 1.94] ADJUSTMENT 6,35 X 19,0 DIA [.25 X .75 DIA] 12,7 mm x 25,4 mm dia [0.50 in x 1.0 in dia] 6,35 X 19,0 DIA [.25 X .75 DIA] LEVER INVERTED 21,3 [.85] 21,3 mm [0.85 in] 21,3 [.85] 38,1 [1.5] 38,1 mm to 91,1 mm [1.5 in to 3.6 in] adjustment 38,1 [1.50] 25,4 [1.00] 25,4 [1.00] 19,0 [.75] 11,0 [.43] 25,4 mm [1.00 in] 19,05 [.75] 6,35 [.25] ADJUSTMENT 11,0 [.43] 19,0 mm [0.75 in] 6,35 [.25] ADJUSTMENT 6,35 mm [0.25 in] adjustment 11,0 mm [0.43 in] Figure 8. LSZ54 type levers cam tracking Figure 9. LSZ55 type levers cam tracking 78,2 mm to 84,6 mm [3.08 in to 3.33 in] adjustment 58,7 mm to 65,0 mm [2.31 in to 2.56 in] adjustment 6,35 mm x 19,0 mm dia. [0.25 in x 0.75 in dia.] 70,9 mm to 77,2 mm [2.79 in to 3.04 in] adjustment 21,3 mm [0.85 in] 21,3 mm [0.85 in] 127,0 mm [5.0 in] max. aluminum rod 330,2 mm [13.0 in] max. stainless steel rod 38,1 mm [1.50 in] 25,4 mm [1.00 in] 25,4 mm [1.0 in] 19,05 mm [0.75 in] 9,05 mm [0.75 in] 11,0 mm [0.43 in] 5,3 mm [0.21 in] adjustment 11,0 mm [0.43 in] 6,35 mm [0.25 in] adjustment sensing.honeywell.com 21 HDLS Series TOP PLUNGERS * MICRO SWITCHTM HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS All top plungers are momentary action. Roller (LSD) Adjustable (LSV) Top plain plunger for in-line operating motion Roller plunger can be rotated at 90 increments Adjustable top plain plunger SPDT SPDT 7 5 8 6 1,4 mm [0.055 in] 1,78 mm [0.07 in] 0 in 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 0 in 4 2 4 2 1-2 3-4 3-4 1-2 3 1 3 1 6,6 mm [0.26 in] 6,6 mm [0.26 in] Contact closed n Contact open o 0 in 6,6 mm [0.26 in] Pretravel 0,38 mm [0.015 in] 0,51 mm [0.02 in] Overtravel SPDT SPDT Double Break 7 5 8 6 0 in 1,4 mm [0.07 in] 6,6 mm [0.26 in] 3 1 0 in 1,27 mm [0.050 in] 4 2 1,4 mm [0.055 in] 1,78 mm [0.07 in] 6,6 mm [0.26 in] Snap Action 2NO/2NC Snap Action 1NO/1NC 8 6 6,6 mm [0.26 in] 0,38 mm [0.015 in] 0,51 mm [0.02 in] 0,38 mm [0.015 in] 1,27 mm [0.050 in] 0,51 mm [0.02 in] 45,8 mm [1.805 in] 55,9 mm [2.20 in] 53 mm to 59 mm [2.08 in to 2.34 in] Operating force 17,8 N [4 lb] max. Op. temp range -12 C to 93 C [10 F to 200 F] (for low temp, high temp, or preleaded versions, see page 11-12) 3 Body Style2 Conduit (NPT) Options Silver Plug-in 0.5 in LSC1A LSD1A LSV1A Gold4 Plug-in 0.5 in LSC1E LSD1E LSV1E Silver Plug-in 0.5 in 1 120 V Ind. lite LSC5A LSD5A LSV5A Silver Plug-in 0.5 in 240 V Ind. lite1 LSC8A LSD8A LSV8A Non-plug-in 0.5 in LSC3K LSD3K LSV3K Plug-in 0.75 in LSC2B LSD2B LSV2B Silver Plug-in 0.5 in LSC2R LSD2R LSV2R Silver Plug-in 0.75 in LSC6B LSD6B LSV6B Silver Non-plug-in 0.75 in LSC4L LSD4L LSV4L Silver Non-plug-in 0.5 in LSC7L LSD7L LSV7L DPDT Double Break 4 2 7 5 1,4 mm [0.07 in] Silver 3 1 0 in Contacts Silver DPDT 1,4 mm [0.055 in] 4 2 4,83 mm [0.19 in] Operating point (nom.) 4 2 3 1 1,78 mm [0.07 in] Different. travel Circuitry 3 1 1,27 mm 1,78 mm [0.050 in] [0.07 in] 1,4 mm [0.07 in] Snap Action 2NO/2NC Snap Action 1NO/1NC DPDT 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 Snap Action 1NO/1NC DPDT 1-2 3-4 3-4 1-2 DPDT Snap Action 2NO/2NC 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 SPDT 1-2 3-4 3-4 1-2 Description Plain (LSC) 120 V Ind. lite1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93 C [200 F] Plug-in listings include base receptacle 3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 C [200 F] 4 Gold-plated contacts 1 2 NOTE: Same polarity each pole. To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch. 22 sensing.honeywell.com MICRO SWITCHTM Heavy-Duty Limit Switches Figure 10. MICRO SWITCHTM HDLS LSC Series (single pole plunger dimensions Figure 11. MICRO SWITCHTM HDLS LSC Series (double pole plunger dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 21,6 [.85] 14,7 [.58] 9,4 [.37] 46,0 [1.81] OPERATING POINT 59,4 [2.34] 39,6 [1.56] O 25,4 [1.0] 28,7 [1.13] 46,0 [1.81] OPERATING POINT MTG PADS 28,7 [1.13] 59,5 [2.34] 70,4 [2.77] 74,9 [2.95] CONDUIT OPENING LOCATION 9,4 [.37] 39,6 [1.56] O 25,4 [1.0] MTG PADS 14,7 [.58] 21,6 [.85] 82,6 [3.25] 89,7 [3.53] 41,1 [1.62] 25,4 [1.00] 39,1 [1.54] 29,4 [1.16] 29,4 [1.16] 16,5 [.65] CONDUIT OPENING LOCATION 26,4 [1.04] 2X 5,2 [.20] O MTG HOLES 2X 10-32 UNF TAPPED FROM REAR ONLY 44,5 [1.75] SPDT Non-plug-in (mm[in]) 2X 10-32 UNF TAPPED FROM REAR ONLY 45,3 [1.78] 2X 5,2 [.20] O MTG HOLES 9,5 [.37] O C'BORE X 7,8 [.31] DEPTH DPDT Non-plug-in (mm[in]) LSC SPDT PLUG-IN PRODUCT DIMENSIONS 21,6 (FOR REFERENCE ONLY) [.85] LSC DPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 21,6 14,7 [.58] 9,4 [.37] [.85] 46,0 [1.81] OPERATING POINT 28,7 [1.13] 59,4 [2.34] 14,7 [.58] 9,4 [.37] 39,6 [1.56] O 25,4 [1,0] MTG PADS 47,8 [1.88] 18,8 [.74] O 25,4 [1.50] 39,6 [1.56] 46,0 [1.84] OPERATING POINT MTG PADS 59,5 [2.34] 89,7 [3.53] 70,4 [2.77] 28,7 [1.13] 82,6 [3.25] 75,8 [2.98] 29,4 [1.16] CONDUIT OPENING LOCATION 41,1 [1.62] 20,3 [.80] 36,6 [1.44] 39,0 [1.54] 2X 10-32 UNF TAPPED FROM REAR ONLY 44,4 [1.75] 29,4 [1.16] CONDUIT OPENING LOCATION 38,1 [1.50] 47,8 [1.88] 21,3 [0.84] 2X 10-32 UNF TAPPED FROM REAR ONLY 45,3 [1.78] 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH 2X 5,2 [.20] O MTG HOLES LSC DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) LSC SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) sensing.honeywell.com 23 HDLS Series Figure 12. MICRO SWITCHTM HDLS LSD Series (single pole) top roller plunger dimensions Figure 13. MICRO SWITCHTM HDLS LSD Series (double pole) top roller plunger dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 39,6 [1.56] 25,4 [1.00] O12,7 [.50] 21,6 [.85] 14,7 [.58] 4,8 [.19] 39,6 [1.56] 21.46@21,6 [.85] 4,8 [1.19] MTG PADS 25,4 [1.00] O12.7 [.50] 14,7 [.58] MTG PADS 28,7 [1.13] 59,4 [2.34] 74,9 [2.95] CONDUIT OPENING LOCATION 55,9 [2.20] OPERATING POINT CONDUIT OPENING LOCATION 41,1 [1.62] 26,4 [1.04] 2X 10-32 UNF TAPPED FROM REAR ONLY 44,4 [1.54] 82,6 [3.25] 29,4 [1.16] 47,8 [1.88] 21,3 [.84] 2X 5,2 [.20] O MTG HOLES 39,1 [1.54] 59,5 [2.34] 89,7 [3.53] 29,4 [1.16] 25,4 [1.00] 28,7 [1.13] 70,4 [2.77] 16,5 [.65] 55,9 [2,20] OPERATING POINT 2X 10-32 UNF TAPPED FROM REAR ONLY 45,3 [1.78] DIMS: MM [IN] 2X 5,2 [.20] O MTG HOLES 9,5 [.37] O C'BORE X 7,8 [.31] DEPTH DPDT Non-plug-in (mm[in]) SPDT PLUG-IN PRODUCT DIMENSIONS SPDTLSDNon-plug-in (mm[in]) (FOR REFERENCE ONLY) LSD DPDT NON PLUG-IN PRODUCT DIMENSIONS 39,6 [1.56] 4,8 [1.19] 14,7 [.58] O12,7 [.50] MTG PADS 28,7 [1.13] 4,8 [0.19] MTG PADS 59,5 [2.34] 2X 5,2 [.20] O MTG HOLES 29,4 [1.16] 47,8 [1.88] 21,3 [.84] 38,1 [1.50] 2X 10-32 UNF TAPPED FROM REAR ONLY 44,4 [1.75] DIMS: MM [IN] DIMS: MM [IN] LSD DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) LSD SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 24 sensing.honeywell.com 2X 10-32 UNF TAPPED FROM REAR ONLY 45,3 [1.78] 55,9 [2.20] OPERATING POINT 82,6 [3.25] 70,4 [2.77] 29,4 [1.16] 41,1 [1.62] 20,3 [.80] 36,6 [1.44] O12,7 [.50] 28,7 [1.13] CONDUIT OPENING LOCATION CONDUIT OPENING LOCATION 25,4 [1.00] 14,7 [.58] 55,9 [2.20] OPERATING POINT 89,7 [3.53] 59,4 [2.34] 75,8 [2.98] 39,0 [1.54] 21,6 [.85] 25,4 [1.00] 21,6 [.85] 39,6 [1.56] (FOR REFERENCE ONLY) 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH MICRO SWITCHTM Heavy-Duty Limit Switches Figure 14. MICRO SWITCHTM HDLS LSV Series top adjustable plunger (single pole) dimensions Figure 15. MICRO SWITCHTM HDLS LSV Series top adjustable plunger (double pole) dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 7,9 [.31] O 25,4 [1.00] 17,5 [.69] 14,7 [.58] 21,6 [.85] 53,1 [2.09] MIN OPERATING POINT 7,9 [.31] O 25,4 [O1.00] 39,6 [1.56] 21,6 [.85] MTG PADS 14,7 [.58] 59,4 [2.34] MAX OPERATING POINT 28,7 [1.13] 59,4 [2.34] 17,5 [.69] MTG PADS 74,9 [2.95] 59,5 [2.34] 89,7 [3.53] 70,4 [2.77] 59,4 [2.34] MAX OPERATING POINT 28,7 [1.13] 53,1 [2.09] MIN OPERATING POINT 82,6 [3.25] CONDUIT OPENING LOCATION 18.8 [.74] 41,1 [1.62] 16,5 [.65] 25,4 [1.00] 39,0 [1.54] 38,1 [1.50] 2X 5,2 [.20] O MTG HOLES 44,5 [1.75] SPDT Non-plug-in (mm[in]) 36,6 [1.56] 25,4 [1.00] 17,5 [.69] 2X 10-32 UNF TAPPED FROM REAR ONLY 53,1 [2.09] MIN OPERATING POINT 2X 5,2 [.20] O MTG HOLES 9,5 [.37] O C'BORE X 7,8 [.31] DEPTH 45,3 [1.78] DIMS: MM [IN] DPDT Non-plug-in (mm[in])DIMENSIONS LSV DPDT PLUG-IN PRODUCT (FOR REFERENCE ONLY) DIMS: MM [IN] 21,6 [.85] 47,8 [1.88] 26,4 [1.04] 2X 10-32 UNF TAPPED FROM REAR ONLY LSV SPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) MTG PADS 29,4 [1.16] 29,4 [1.16] CONDUIT OPENING LOCATION 14,7 [.58] 7,9 [.31] 21,6 [.85] 59,4 [2.34] MAX OPERATING POINT 28,7 [1.13] MTG PADS 59,4 [2.34] CONDUIT OPENING LOCATION 20,3 [.80] 36,6 [1.44] 39,0 [1.54] 28,7 [1.13] 41,1 [1.62] 2X 5,2 [.20] O MTG HOLES 2X 10-32 UNF TAPPED FROM REAR ONLY DIMS: MM [IN] 59,4 [2.34] MAX OPERATING POINT 53,1 [2.09] MIN OPERATING POINT 59,5 [2.34] 82,6 [3.25] 70,4 [2.77] 29,4 [1.16] 44,4 [1.75] 7,9 [.31] 17,5 [.69] 89.65 75,8 [2.98] 14,7 [.58] O 25,4 [O1.00] CONDUIT OPENING LOCATION 38,1 [1.50] 29,4 [1.16] 21,3 [.84] 47,8 [1.88] 2X 10-32 UNF TAPPED FROM REAR ONLY 45,3 [1.78] DIMS: MM [IN] 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH LSV DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) LSV SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) sensing.honeywell.com 25 HDLS Series SIDE PLUNGERS * MICRO SWITCHTM HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS Roller (LSF) Adjustable (LSW) Maintained (LSG) Side plain plunger (momentary) Side roller plunger (momentary) Adjustable side plain plunger (momentary) Side plain plunger with maintained contact 0 in 4 2 3 1 4 2 7 5 8 6 1-2 3-4 3-4 1-2 3 1 0 in 1,4 mm [0.055 in] 2,54 mm [0.10 in] 0 in 2,03 mm [0.08 in] reset 1,4 mm [0.055 in] 2,54 mm [0.10 in] 4,32 mm [0.17 in] trip 6,35 mm [0.25 in] Contact closed n Contact open o 7,36 mm [0.29 in] Circuitry DPDT SPDT Contacts Body Style2 Conduit (NPT) Silver SPDT Double Break 6,35 mm [0.25 in] 2,29 mm [0.09 in] 4,83 mm [0.19 in] 2,0 mm [0.08 in] 33,0 mm [1.30 in] 44,1 mm [1.74 in] 41,0 mm to 47,4 mm [1.62 in to 1.87 in] 67,6 mm [1.48 in] 44,5 N [10 lb] max. 26,7 N [6 lb] max. -12 C to 93 C [10 F to 200F] (for low temp, high temp, or preleaded versions, see pags 11-12) -1 C to 93 C [30 F to 200F] (for low temp, high temp, or preleaded versions, see page 11-12) Options LSE1A LSF1A LSW1A LSG1A Plug-in 0.5 in Plug-in 0.5 in Silver Plug-in 0.5 in 120 V Ind. lite1 Silver Plug-in 0.5 in 240 V Ind. lite1 LSE8A LSF8A LSW8A LSG8A Silver Non-plug-in 0.5 in LSE3K LSF3K LSW3K LSG3K LSE2B LSF2B LSW2B LSG2B LSE2R LSF2R LSW2R LSG2R LSE6B LSF6B LSW6B LSG6B LSE1E LSF1E LSW1E LSG1E LSE5A LSF5A LSW5A LSG5A Silver Plug-in 0.75 in Silver Plug-in 0.5 in Silver Plug-in 0.75 in Gold4 Plug-in 0.5 in LSE6S - - - Silver Silver Non-plug-in 0.75 in LSE4L LSF4L LSW4L LSG4L Non-plug-in 0.5 in LSE7L LSF7L LSW7L LSG7L DPDT Double Break 4 Gold 4,32 mm [0.17 in] Operating force Op. temp range3 4,32 mm [0.17 in] trip 2,54 mm [0.10 in] Overtravel Operating point (nominal) 2,03 mm [0.08 in] reset Single pole: 0,64 mm [0.025 in] Double pole: 0,89 mm [0.035 in] Pretravel Different. travel 7,36 mm [0.29 in] 0 in 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 Snap Action 2NO/2NC Snap Action 1NO/1NC 1-2 3-4 3-4 1-2 Description Plain (LSE) 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 Heads may be positioned to accept actuation from any of four directions, 90 apart. 120 V Ind. lite1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93 C [200 F] 2 Plug-in listings include base receptacle 3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 C [200 F] 4 Gold-plated contacts 1 NOTE: Same polarity each pole. To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch. 26 sensing.honeywell.com MICRO SWITCHTM Heavy-Duty Limit Switches Figure 16. MICRO SWITCHTM HDLS LSE Series side plain plunger (single pole) dimensions Figure 17. MICRO SWITCHTM HDLS LSE Series side plain plunger (double pole) dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 21,6 [.85] MTG PADS 14,7 [.58] 33,0 [1.30] OPERATING POINT 20,3 [.80] O9,4 [.37] 39,6 [1.56] 19,0 [.75] 31,5 [1.24] 14,7 [.58] 33,0 [1.30] OPERATING POINT 21,6 [.85] 20,3 [.80] 39,6 [1.56] 19,0 [.75] O 9,4 [.37] MTG PADS 31,5 [1.24] O 25,4 [1.00] O25,4 [1.00] 59,4 [2.34] 70,4 [2.77] 74,9 [2.95] 59,5 [2.34] 89,7 [3,53] CONDUIT OPENING LOCATION CONDUIT OPENING LOCATION 29,4 [1.16] 16,5 [.65] 25,4 [1.00] 39,1 [1.54] 26,4 [1.04] 2X 10-32 UNF TAPPED FROM REAR ONLY LSE DPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) SPDT Non-plug-in (mm[in]) DPDT Non-plug-in (mm[in]) LSE SPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 33,0 [1.30] 21,6 OPERATING POINT [.85] 14,7 [.58] MTG PADS O9,4 [.37] O 25,4 [1.00] 19,0 [.75] 31,5 [1.24] CONDUIT OPENING LOCATION 70,4 [2.77] 29,4 [1.16] 41,1 [1.62] 2X 5,2 [.20] O MTG HOLES 2X 10-32 UNF TAPPED FROM REAR ONLY 44,4 [1.75] DIMS: MM [IN] 39,6 [1.56] O 9,4 [.37] 20,3 [.80] 19,0 [.75] 31,5 [1.24] O 25,4 [1.00] 59,4 [2.34] 75,8 [2.98] 14,7 [.58] 33,0 [1.30] OPERATING POINT 21,6 [.85] 39,6 [1.56] 20,3 [.80] 20,3 [.80] 36,6 [1.44] 39,0 [1.54] 2X 5,2 [.20] O MTG HOLES 9,5 [.37] O C'BORE X 7,8 [.31] DEPTH DIMS: MM [IN] DIMS: MM [IN] MTG PADS 2X 10-32 UNF TAPPED FROM REAR ONLY 38,1 [1.50] 2X 5,2 [.20] O MTG HOLES 44,5 [1.75] 29,4 [1.16] 47,8 [1.88] 18,8 [.74] 41,1 [1.62] 70,4 [2.77] 59,5 [2.34] 89,7 [3.53] 82,6 [3.25] 29,4 [1.16] CONDUIT OPENING LOCATION 47,8 [1.88] 21,3 [.84] 38,1 [1.50] 2X 10-32 UNF TAPPED FROM REAR ONLY 45,3 [1.78] DIMS: MM [IN] 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH LSE DPDT NON PLUG-IN PRODUCT DIMENSIONS LSE SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) (FOR REFERENCE ONLY) sensing.honeywell.com 27 HDLS Series Figure 18. MICRO SWITCHTM HDLS LSF Series side roller plunger (single pole) dimensions Figure 19. MICRO SWITCHTM HDLS LSF Series side roller plunger (double pole) dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 44,2 [1.74] OPERATING POINT MTG PADS 14,7 [.58] 12,7 [.50] ROLLER DIAMETER 21,6 [.85] MTG PADS 20.3 [.80] 59,4 [2.34] 2X 5,2 [.20] O MTG HOLES 38,1 [1.50] 2X 10-32 UNF TAPPED FROM REAR ONLY 44,4 [1.54] 26,4 [1.04] 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] O MTG HOLES 9,5 [.37] O C'BORE X 7,8 [.31] DEPTH 45,3 [1.78] DIMS: MM [IN] DPDT Non-plug-in (mm[in]) LSF SPDT PLUG-IN PRODUCT DIMENSIONS 44,2 [1.74] (FOR REFERENCE ONLY) OPERATING 39,6 [1.56] 12,7 [.50] ROLLER DIAMETER 20,3 [.80] DIMS: MM [IN] LSF DPDT PLUG-IN PRODUCT DIMENSIONS 44,2 (FOR REFERENCE[1.74] ONLY) 14,7 [.58] POINT 21,6 [.85] 47,8 [1.88] 18,8 [.74] SPDT Non-plug-in (mm[in]) MTG PADS 29,4 [1.16] 41,1 [1,62] 25,4 [1.00] OPERATING POINT MTG PADS 21,6 [.85] 4,8 [.19] 31,5 [1.24] 19,0 [.75] 20,3 [.80] 70,4 [2.77] 59,5 [2.34] 82,6 [3.25] 29,4 [1.16] 20,3 [.80] 36,6 [1.44] 41,1 [1,62] 2X 5,2 [.20] O MTG HOLES 2X 10-32 UNF TAPPED FROM REAR ONLY 44,4 [1.75] DIMS: MM [IN] CONDUIT OPENING LOCATION 29,4 [1.16] 21,3 [.84] 38,1 [1.50] 47,8 [1.88] 2X 10-32 UNF TAPPED FROM REAR ONLY 45,3 [1.78] DIMS: MM [IN] LSF SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 28 31,5 [1.24] 19,0 [.75] 89,7 [3.53] 39,0 [1.54] 39,6 [1.56] 4,8 [.19] n 25,4 [1.00] 59,4 [2.34] CONDUIT OPENING LOCATION 14,7 [.58] 12,7 [.50] ROLLER DIAMETER 25,4 [1.00] 75,8 [2.98] 82,6 [3.25] CONDUIT OPENING LOCATION 29,4 [1.16] 16,5 [.65] 59,5 [2.34] 89,7 [3,53] 70,4 [2.77] CONDUIT OPENING LOCATION 39,1 [1.54] 31,5 [1.24] 25,4 [1.00] 25,4 [1.00] 74,9 [2.95] 39,6 [1.56] 4,8 [.19] 19,0 [.75] 31,5 [1.24] 19,0 [.75] 14,7 [.58] 12.7 [.50] ROLLER DIAMETER 21,6 [.85] 39,6 [1.56] 4,8 [.19] 20,3 [.80] 44,2 [1.74] OPERATING POINT sensing.honeywell.com 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH LSF DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) MICRO SWITCHTM Heavy-Duty Limit Switches Figure 20. MICRO SWITCHTM HDLS LSW Series side adjustable plunger (single pole) dimensions Figure 21. MICRO SWITCHTM HDLS LSW Series side adjustable plunger (double pole) dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 21,6 [.85] 41,1 [1.62] MIN OPERATING POINT 20,3 [.80] MTG PADS 21,6 [.85] 47,5 [1.87] MAX OPERATING POINT 39,6 [1.56] 20,3 [.80] 14,7 [.58] 19,0 [.75] 31,4 [1.24] 47,5 [1.87] MAX OPERATING POINT 41,1 [1.62] MIN OPERATING POINT 14,7 [.58] 19,0 [.75] 31,4 [1.24] MTG PADS O 25,4 [1.00] O 25,4 [1.00] 7,9 [.31] ACROSS FLATS 74,9 [2.95] CONDUIT OPENING LOCATION 39,6 [1.56] 59,4 [2.34] 70,4 [2.77] 29,4 [1.16] 16,5 [.65] 89,7 [3.53] 82,6 [3.25] 29,4 [1.16] 2X 5,2 [.20] O MTG HOLES 44,5 [1.75] 59,4 [2.34] CONDUIT OPENING LOCATION 41,1 [1.62] 25,4 [1.00] 39,0 [1.54] 7,9 [.31] ACROSS FLATS 38,1 [1.50] 2X 10-32 UNF TAPPED FROM REAR ONLY 47,8 [1.88] 18,8 [.74] 26,4 [1.04] 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] O MTG HOLES 9,5 [.37] O C'BORE X 7,8 [.31] DEPTH 45,3 [1.78] DIMS: MM [IN] DIMS: MM [IN] LSW SPDT PLUG-IN PRODUCT DIMENSIONS SPDT Non-plug-in (mm[in]) DPDT Non-plug-in (mm[in]) LSW DPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 21,6 [.85] 41,1 [1.62] MIN OPERATING POINT 20,3 [.80] MTG PADS (FOR REFERENCE ONLY) 47,5 [1.87] MAX OPERATING POINT 47,5 [1.87] MAX OPERATING POINT 21,6 [.85] 39,6 [1.56] 14,7 [.58] 19,0 [.75] 31,4 [1.24] MTG PADS 41,1 [1.62] MIN OPERATING POINT 20,3 [.80] 7,9 [.31] ACROSS FLATS CONDUIT OPENING LOCATION 39,0 [1.54] 14,7 [.58] 19,0 [.75] 31,4 [1.24] O 25,4 [1.00] 75,8 [2.98] 39,6 [1.56] O 25,4 [1.00] 59,4 [2.34] 70,4 [2.77] 7,9 [.31] ACROSS FLATS 89,7 [3.53] 59,4 [2.34] 82,6 [3.25] 29,4 [1.16] 41,1 [1.62] 20,3 [.80] 36,6 [1.44] 2X 5,2 [.20] O MTG HOLES 44,4 [1.75] 2X 10-32 UNF TAPPED FROM REAR ONLY DIMS: MM [IN] LSW SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 29,4 [1.16] CONDUIT OPENING LOCATION 47,8 [1.88] 21,3 [.84] 38,1 [1.50] 45,3 [1.78] 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH LSW DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) sensing.honeywell.com 29 HDLS Series Figure 22. MICRO SWITCHTM HDLS LSG Series maintained contact side plunger (single pole) dimensions Figure 23. MICRO SWITCHTM HDLS LSG Series maintained contact side plunger (double pole) dimensions SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 76,2 [3.00] MTG PADS 76,2 [3.00] MTG PADS 14,7 [.58] 21,6 [0.85] 37,5 [1.48] OPERATING POINT O 9,47 [.38] 2X O 9,7 [.38] 2X n 25,4 [1.00] 19,0 [.75] 19,0 [.75] CONDUIT OPENING LOCATION 37,5 [1.48] OPERATING POINT 20,32 [.80] 20,3 [.80] 2X O 25,4 [1.00] 59,4 [2.34] 74,9 [2.95] 14,7 [1.56] 21,6 [.85] 119,1 [4.69] 70,4 [2.77] 41,1 [1.62] 38,1 [1.50] 2X 5,2 [.20] O MTG HOLES 44,5 [1.75] 82,6 [3.25] CONDUIT OPENING LOCATION 29,4 [1.16] 16,5 [.65] 25,4 [1.00] 39,1 [1.54] 59,4 [2.34] 89,7 [3.53] 29,4 [1.16] 47,8 [1.88] 18,8 [.74] 26,4 [1.04] 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] O MTG HOLES 9,5 [.37] O C'BORE X 7,8 [.31] DEPTH 45,3 [1.78] 2X 10-32 UNF TAPPED FROM REAR ONLY DIMS: MM [IN] DIMS: MM [IN] LSG DPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) LSG SPDT PLUG-IN PRODUCT DIMENSIONS SPDT Non-plug-in (mm[in]) (FOR REFERENCE ONLY) DPDT Non-plug-in (mm[in]) 76,2 [3.00] 76,2 [3.00] MTG PADS 21,6 [.85] 37,5 [1.48] OPERATING POINT 20,3 [.80] 75,8 [2.98] 39,0 [1.54] 70,4 [2.77] 29,4 [1.16] 36,6 [1.44] 41,1 [1.62] 44,4 [1.75] DIMS: MM [IN] 2X 5,2 [.20] O MTG HOLES 2X 10-32 UNF TAPPED FROM REAR ONLY (FOR REFERENCE ONLY) 30 sensing.honeywell.com 2X O 25,4 [1.00] 19,0 [.75] 119,1 [4.69] 59,4 [2.34] 89,7 [3.53] 21,3 [.84] 38,1 [1.50] CONDUIT OPENING LOCATION 82,6 [3.25] 29,4 [1.16] 47,8 [1.88] 45,3 [1.78] DIMS: MM [IN] LSG DPDT NON PLUG-IN PRODUCT DIMENSIONS LSG SPDT NON PLUG-IN PRODUCT DIMENSIONS 2X O 9,7 [.38] 20,3 [.80] 25,4 [1.00] 59,4 [2.34] 20,3 [.80] 37,5 [1.48] OPERATING POINT O 9,7 [.38] 19,0 [.75] CONDUIT OPENING LOCATION 14,7 [.58] 14,7 [1.56] 21,6 [0.85] 101,7 [4.0] MTG PADS (FOR REFERENCE ONLY) 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH MICRO SWITCHTM Heavy-Duty Limit Switches WOBBLES * MICRO SWITCHTM HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS LSJ Series 7N Actuator LSJ Series 7M Actuator LSK Series 8A-8C Actuator Plastic rod lever (wobble stick) Flexible cable lever Spring wire lever may be formed for special needs Cat whisker actuator for low operating force applications 4 1 2 1 3 2 4 1 2 0 0 8 12 16 -8C Snap Action 1NO/1NC Snap Action 1NO/1NC 3 4 1 2 0 20 -8A** 15 25 4 2 8 5 6 0 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 7 LSJ1A-7M - Spring wire Circuitry Contacts SPDT SPDT Double Break DPDT LSJ1A-7N - Flexible actuator 2 7 8 5 7 6 8 5 6 0 4 2 7 8 5 6 0 20 Actuator: 140 mm [5.5 in] 3 4 1 2 7 8 5 6 0 10 15 16 16 20 25 25 Actuator: 140 mm [5.5 in] Actuator: 330 mm [13 in] Pretravel 25,4 mm [1.0 in] 38,0 mm [1.5 in] 102 mm [4.0 in] Oper. force 2,78 Nm [10 oz] 1,95 Nm [7 oz] 1,39 Nm [5 oz] Op. temp range3 3 1 8A act.: 140 mm [5.5 in] SST 8C act.: 140 mm [5.5 in] steel plated 51,0 mm [2.0 in] 8A: 1,39 Nm [5 oz]; 8C: 1,95 Nm [7 oz] -12 C to 93 C [10F to 200 F] (for low temp, high temp, or preleaded versions, see pages 11-12) Conduit (NPT) Silver Plug-in 0.5 in 4 Gold Plug-in 0.5 in Silver Plug-in 0.5 in 120 V Ind. lite1 Silver Plug-in 0.5 in 240 V Ind. lite1 LSJ8A-7A LSJ8A-7N LSJ8A-7M LSK8A-8A LSK8A-8C Silver Non-plug-in 0.5 in LSJ3K-7A LSJ3K-7N LSJ3K-7M LSK3K-8A LSK3K-8C Silver Plug-in 0.75 in LSJ2B-7A LSJ2B-7N LSJ2B-7M LSK2B-8A LSK2B-8C Silver Plug-in 0.5 in LSJ6B-7A LSJ6B-7N LSJ6B-7M LSK6B-8A LSK6B-8C Silver Plug-in 0.75 in LSJ2R-7A LSJ2R-7N LSJ2R-7M LSK2R-8A LSK2R-8C Silver Non-plug-in 0.75 in LSJ4L-7A LSJ4L-7N LSJ4L-7M LSK4L-8A LSK4L-8C Silver Non-plug-in 0.5 in LSJ7L-7A LSJ7L-7N LSJ7L-7M LSK7L-8A LSK7L-8C DPDT Double Break LSK1A8C - Coil spring 4 1 Body Style LSK1A8A - Cat whisker 3 2 0 LSJ1A-7A - Plastic rod 4 8 12 Lever length from top mounting hole 3 1 Snap Action 2NO/2NC Snap Action 2NO/2NC 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 3 1 Snap Action 2NO/2NC 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 Contact closed n Contact open o Snap Action 2NO/2NC 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 2 0 25 Snap Action 2NO/2NC 4 10 16 20 3 1 1-2 3-4 3-4 1-2 3 1-2 3-4 3-4 1-2 4 1-2 3-4 3-4 1-2 0 Snap Action 1NO/1NC 3 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 Snap Action 1NO/1NC 1-2 3-4 3-4 1-2 Snap Action 1NO/1NC 1-2 3-4 3-4 1-2 Description LSJ Series 7A Actuator 2 Options LSJ1A-7A 120 V Ind. lite1 LSJ1A-7N LSJ1A-7M LSK1A-8A LSK1A-8C LSJ1E-7A - LSJ1E-7M LSK1E-8A LSK1E-8C LSJ5A-7A LSJ5A-7N LSJ5A-7M LSK5A-8A LSK5A-8C Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93C [200 F] Plug-in listings include base receptacle 3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 C [200 F] 4 Gold-plated contacts ** These cat whiskers have a 140 mm [5.5 in] long actuator. To specify a 190 mm [7.5 in] length actuator, substitute -8B for -8A. 1 2 NOTE: Same polarity each pole. To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch. sensing.honeywell.com 31 HDLS Series Figure 24. MICRO SWITCHTM HDLS LSJ_ _-7A Series wobble (single pole) dimensions 23,6 [1.56] 21,6 [.85] O 6,4 [.25] Figure 25. MICRO SWITCHTM HDLS LSJ_ _-7A Series wobble (double pole) dimensions 39,6 [1.56] 21,6 [.85] 14,7 [.58] SPDT Plug-in (mm[in]) 14,7 [.58] O 6,4 [.25] DPDT Plug-in (mm[in]) 139,7 [5.50] 139,7 [5.50] MTG PADS 15,2 [.60] 15,2 [.60] 63,5 [2.50] 63,5 [2.50] 26,4 [1.04] MTG PADS 26,4 [1.04] 74,9 [2.95] CONDUIT OPENING LOCATION 16,5 [.65] 25,4 [1.00] 39,0 [1.54] 59,5 [2.34] 59,4 [2.34] 70,4 [2.77] SPDT Non-plug-in (mm[in]) 29,4 [1.16] CONDUIT OPENING LOCATION 29,4 [1.16] 41,1 [1.62] 47,8 [1.88] 18,8 [.74] 26,4 [1.04] 38,1 [1.50] 2X 5,2 [.20] O MTG HOLES 44,5 [1.75] 82,6 [3.25] 89,7 [3.53] 2X 10-32 UNF TAPPED FROM REAR ONLY 45,3 [1.78] 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] O MTG HOLES 9,5 [.37] O C'BORE X 7,8 [.31] DEPTH DIMS: MM [IN] DPDT Non-plug-in (mm[in]) LSJ PLASTIC ROD DPDT PLUG-IN PRODUCT DIMENSIONS 39,6 DIMS: MM [IN] (FOR21,6REFERENCE ONLY) 39,6 LSJ PLASTIC ROD SPDT PLUG-IN PRODUCT DIMENSIONS [1.56] 21,6 14,7 [.85] (FOR REFERENCE ONLY) [.58] [.85] [1.56] 14,7 [.58] O 6,4 [.25] O 6,4 [.25] 139,7 [5.50] 139,7 [5.50] MTG PADS 15,2 [.60] MTG PADS 15,2 [.60] 63,5 [2.50] 63,5 [2.50] 26,4 [1.04] 26,4 [1.04] 59,4 [2.34] 75,8 [2.98] 29,4 [1.16] CONDUIT OPENING LOCATION 20,3 [.80] 36,6 [1.44] 39,0 [1.54] 41,1 [1.62] 2X 5,2 [.20] O MTG HOLES 44,4 [1.75] 2X 10-32 UNF TAPPED FROM REAR ONLY DIMS: MM [IN] LSJ PLASTIC ROD SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 32 70,4 [2.77] sensing.honeywell.com 59,5 [2.34] 89,7 [3.53] 82,6 [3.25] 29,4 [1.16] CONDUIT OPENING LOCATION 47,8 [1.88] 21,3 [.84] 38,1 [1.50] 2X 10-32 UNF TAPPED FROM REAR ONLY 45,3 [1.78] DIMS: MM [IN] 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH LSJ PLASTIC ROD DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) MICRO SWITCHTM Heavy-Duty Limit Switches Figure 26. MICRO SWITCHTM HDLS LSJ_ _-7N Series wobble (single pole) dimensions 39,6 21,6 [.850] [1.56] O 4,75 [.187] Figure 27. MICRO SWITCHTM HDLS LSJ_ _-7N Series wobble (double pole) dimensions 39,6 21,6 [.85] 14,7 [.58] [1.56] 14.7 [.58] 6,4 [.25] SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 139,7 [5.50] 139.7 [5.50] MTG PADS 15,2 [.60] 15,2 [.60] 63,5 [2.50] 59,4 [2.34] 74,9 [2.95] 63,5 [2.50] MTG PADS 26,4 [1.04] 59,5 [2.34] 70,4 [2.77] 82,6 [3.25] 89,7 [3.53] CONDUIT OPENING LOCATION 29,4 [1.16] 16,5 [.65] 25,4 [1.00] 39,0 [1.54] CONDUIT OPENING LOCATION 41,1 [1.62] 2X 5,2 [.20] O MTG HOLES 44,5 [1.75] 29,4 [1.16] 18,8 [.74] 26,4 [1.04] 38,1 [1.50] 2X 10-32 UNF TAPPED FROM REAR ONLY 47,8 [1.88] 2X 10-32 UNF TAPPED FROM REAR ONLY 45,3 [1.78] 2X 5,2 [.20] O MTG HOLES 9,5 [.37] O C'BORE X 7,8 [.31] DEPTH DIMS: MM [IN] DIMS: MM [IN] SPDT Non-plug-in LSJ (mm[in]) FLEXIBLE CABLE SPDT PLUG-IN PRODUCT DIMENSIONS (FOR21,6REFERENCE ONLY) [.850] 39,6 [1.56] DPDT Non-plug-in LSJ FLEXIBLE CABLE DPDT PLUG-IN PRODUCT DIMENSIONS (mm[in]) (FOR REFERENCE ONLY) 14,7 [.58] O 4.75 [1.87] 21,6 [.85] 39,6 [1.56] 14,7 [.58] 6,4 [.25] 139,7 [5.5] 139,7 [5.50] MTG PADS 15,2 [.60] MTG PADS 63,5 [2.50] 26,4 [1.04] 63,5 [2.50] 59,4 [2.34] 89.7 [3.53] 59,4 [2.34] 75,8 [2.98] 82,6 [3.25] 70,4 [2.77] CONDUIT OPENING LOCATION CONDUIT OPENING LOCATION 20,3 [.80] 36,6 [1.44] 39,0 [1.54] 29,4 [1.16] 41,1 [1.62] 2X 5,2 [.20] O MTG HOLES 44,4 [1.75] 2X 10-32 UNF TAPPED FROM REAR ONLY DIMS: MM [IN] 29,4 [1.16] 21,3 [.84] 38,1 [1.50] 47,8 [1.88] 2X 10-32 UNF TAPPED FROM REAR ONLY 45,3 [1.78] DIMS: MM [IN] 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH LSJ FLEXIBLE CABLE DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) FLEXIBLE CABLE SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) sensing.honeywell.com 33 HDLS Series Figure 29. MICRO SWITCHTM HDLS LSJ_ _-7M Series wobble (double pole) dimensions Figure 28. MICRO SWITCHTM HDLS LSJ_ _-7M Series wobble (single pole) dimensions O 2,0 [.08] SPDT Plug-in (mm[in]) 21,6 [.85] 21,6 [.85] n 2,0 [.08] 21,6 [.85] 39,6 [1.56] 39,6 [1.56] 21,6 [.85] DPDT Plug-in (mm[in]) 330,2 [13.00] 330,2 [13.00] 66,8 [2.63] 15,2 [.60] MTG PADS 66,8 [2.63] 15,2 [.60] MTG PADS 26,4 [1.04] 26,4 [1.04] 59,5 [2.34] 59,4 [2.34] 74,9 [2.95] CONDUIT OPENING LOCATION 70,4 [2.77] 89,7 [3.53] CONDUIT OPENING LOCATION 29,4 [1.16] 16,5 [.65] 25,4 [1.00] 39,0 [1.54] 41,1 [1.62] 2X 10-32 UNF TAPPED FROM REAR ONLY SPDT Non-plug-in (mm[in]) LSJ SPRING WIRE SPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 21,6 [.85] 2,0 [.08] 38,1 [1.50] 47,8 [1.88] 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] O MTG HOLES 9,5 [.37] O C'BORE X 7,8 [.31] DEPTH 45,3 [1.78] DPDT Non-plug-in (mm[in]) 21,6 [.85] 39,6 [1.56] DIMS: MM [IN] 2,0 [.08] 21,6 [.85] 21,6 [.85] 39,6 [1.56] 330,2 [13.00] 330,2 [13.00] MTG PADS 29,4 [1.16] 18,8 [.74] 26,4 [1.04] 2X 5,2 [.20] O MTG HOLES 44,5 [1.75] 66,8 [2.63] 15,2 [.60] MTG PADS 66,8 [2.63] 15,2 [.60] 26,4 [1.04] 26,4 [1.04] 59,4 [2.34] 75,8 [2.98] 20,3 [.80] 36,6 [1.44] 2X 5,2 [.20] O MTG HOLES 44,4 [1.75] 2X 10-32 UNF TAPPED FROM REAR ONLY DIMS: MM [IN] SCALE 1.000 34 sensing.honeywell.com 59,5 [2.34] 89,7 [3.53] 70,4 [2.77] 29,4 [1.16] 41,1 [1.62] CONDUIT OPENING LOCATION 39,0 [1.54] 82,6 [3.25] CONDUIT OPENING LOCATION 82,6 [3.25] 29,4 [1.16] 47,8 [1.88] 21,3 [.84] 38,1 [1.50] 2X 10-32 UNF TAPPED FROM REAR ONLY 45,3 [1.78] DIMS: MM [IN] 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH MICRO SWITCHTM Heavy-Duty Limit Switches Figure 31. MICRO SWITCHTM HDLS LSK_ _-8A Series wobble (double pole) dimensions Figure 30. MICRO SWITCHTM HDLS LSK_ _-8A Series wobble (single pole) dimensions 39,6 [1.56] 1,3 [.05] 39,6 [1.56] O1,3 [.05] 14,7 [.58] 21,6 [.85] 14,7 [.58] 21,6 [.85] SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 139,7 [5.50] 139,7 [5.50] MTG PADS 15,2 [.60] 15,2 [.60] 65,0 [2.56] 26,4 [1.04] 59,4 [2.34] 74,9 [2.95] 65,0 [2.56] MTG PADS 26,4 [1.04] 59,5 [2.34] 70,4 [2.77] 82,6 [3.25] 89,7 [3.53] 29,4 [1.16] CONDUIT OPENING LOCATION CONDUIT OPENING LOCATION 41,1 [1.62] 16,5 [.65] 25,4 [1.00] 39,0 [1.54] 2X 5,2 [.20] O MTG HOLES 2X 10-32 UNF TAPPED FROM REAR ONLY 44,5 [1.75] DIMS: MM [IN] SPDT Non-plug-in (mm[in]) 47,8 [1.88] 2X 10-32 UNF TAPPED FROM REAR ONLY 45,3 [1.78] 2X 5,2 [.20] O MTG HOLES 9,5 [.37] O C'BORE X 7,8 [.31] DEPTH DPDT Non-plug-in (mm[in]) LSK CAT WHISKER O1,3 SPDT PLUG-IN PRODUCT DIMENSIONS [.05] 39,6 (FOR REFERENCE ONLY) [1.56] 21,6 [.85] 29,4 [1.16] 18,8 [.74] 26,4 [1.04] 38,1 [1.50] O1,3 39,6 [.05] LSK CAT WHISKER DPDT PLUG-IN PRODUCT DIMENSIONS [1.56] 21,6 (FOR REFERENCE ONLY) [.85] 14,7 [.58] 14,7 [.58] 139,7 [5.50] 139,7 [5.50] MTG PADS 15,2 [.60] MTG PADS 15,2 [.60] 65,0 [2.56] 26,4 [1.04] 75,8 [2.98] CONDUIT OPENING LOCATION 20,3 [.80] 36,6 [1.44] 39,0 [1.54] 29,4 [1.16] 41,1 [1.62] 2X 5,2 [.20] O MTG HOLES 44,4 [1.75] J CAT WHISKER SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 2X 10-32 UNF TAPPED FROM REAR ONLY 59,5 [2.34] 89,7 [3.53] 70,4 [2.77] 59,4 [2.34] 65,0 [2.56] 26,4 [1.04] 82,6 [3.25] CONDUIT OPENING LOCATION 29,4 [1.16] 21,3 [.84] 47,8 [1.88] 38,1 [1.50] 45,3 [1.78] 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH LSJ CAT WHISKER DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) sensing.honeywell.com 35 HDLS Series Figure 32. MICRO SWITCHTM HDLS LSK_ _-8C Series wobble (single pole) dimensions 21,6 [.850] 39,6 [1.56] n 6,35 [.25] Figure 33. MICRO SWITCHTM HDLS LSK_ _-8C Series wobble (double pole) dimensions 39,6 [1.56] 21,6 [.850] 14,7 [.58] 14,7 [.58] O 6,35 [.25] SPDT Plug-in (mm[in]) DPDT Plug-in (mm[in]) 140 [5.50] 140 [5.50] MTG PADS 15,2 [.60] 15,2 [.60] 26,4 [1.04] MTG PADS 26,4 [1.04] 74,9 [2.95] CONDUIT OPENING LOCATION 59,5 [2.34] 59,4 [2.34] 70,4 [2.77] 16,5 [.65] 18,8 [.74] 41,1 [1.62] 26,4 [1.04] 38,1 [1.50] 2X 5,2 [.20] O MTG HOLES 44,5 [1.75] 2X 10-32 UNF TAPPED FROM REAR ONLY SPDT Non-plug-in (mm[in]) 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] O MTG HOLES 9,5 [.37] O C'BORE X 7,8 [.31] DEPTH 45,3 [1.78] DPDT Non-plug-in DIMS: MM [IN] (mm[in]) LSJ SPRING WIRE DPDT PLUG-IN PRODUCT DIMENSIONS 39,6 21,6 [1.56] (FOR [.850] REFERENCE ONLY) 39,6 21,6 29,4 [1.16] 47,8 [1.88] CONDUIT OPENING LOCATION 29,4 [1.16] 25,4 [1.00] 39,0 [1.54] 82,6 [3.25] 89,7 [3.53] [1.56] [.850] LSK COIL SPRING SPDT PLUG-IN PRODUCT DIMENSIONS 14,7 O 6,35 [.58] (FOR REFERENCE ONLY) [.25] 14,7 [.58] O 6.35 [.25] 140 [5.50] 140 [5.50] MTG PADS 15,2 [.60] MTG PADS 15,2 [.60] 26,4 [1.04] 26,4 [1.04] 59,4 [2.34] 75,8 [2.98] CONDUIT OPENING LOCATION 29,4 [1.16] 20,3 [.80] 36,6 [1.44] 39,0 [1.54] 41,1 [1.62] 2X 5,2 [.20] O MTG HOLES 44,4 [1.75] K COIL SPRING SPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) 36 sensing.honeywell.com 59,5 [2.34] 70,4 [2.77] 2X 10-32 UNF TAPPED FROM REAR ONLY 82,6 [3.25] 89,7 [3.53] 29,4 [1.16] CONDUIT OPENING LOCATION 21,3 [.84] 38,1 [1.50] 47,8 [1.88] 45.3 [1.78] 2X 10-32 UNF TAPPED FROM REAR ONLY 2X 5,2 [.20] O MTG HOLES 8,0 [.32] O C'BORE X 7,8 [.31] DEPTH LSK COIL WIRE DPDT NON PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) MICRO SWITCHTM Heavy-Duty Limit Switches SPECIAL APPLICATIONS HIGH CAPACITY LIMIT SWITCH Features * High dc current ratings * 20 A rating at 120 Vac (single pole) * Plug-in or non-plug in * Positive retention lever arm * High resistance to seismic shock This series has a wide gap contact block that handles a higher make/break dc load. In addition, a special lever arm has a serrated shaft hole and a cap screw with locking nut for attaching the lever to the rotary shaft. This assures a firm grip on the operating shaft and positive retention of the lever adjustment. The need for precise operation, coupled with challenging environmental conditions places rigid demands on any control. Honeywell's products are intended to satisfy these demands with its high capacity HDLS, designed to perform reliably under these conditions. SPDT Double Break Single Pole DPDT Double Break Double Pole Voltage Resistive Load Inductive Load Resistive Load Inductive Load 125 Vdc 2.0 A 1.0 A 1.0 A 0.4 A 250 Vdc 0.7 A 0.4 A 0.4 A 0.2 A 120 Vac 20 A 20 A 10 A 10 A 240 Vac 15 A 15 A 7.5 A 7.5 A 480 Vac 10 A 10 A 5A 5A 600 Vac 5A 5A 2.5 A 2.5 A Maximum operating rate - 15 operations per minute. NOTE: Same polarity each pole. Double pole, non-plug-in, 0.75 in conduit LSQ052 Double pole, plug-in, 0.75 in conduit 0 75 LSQ053 Single pole, non-plug-in, 0.5 in conduit LSQ054 Single pole, plug-in, 0.5 in conduit 9 17 0 1-2 3-4 3-4 1-2 LSQ051 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 Listings 9 17 75 LSZ616 Replacement lever for above listings Pretravel 17 max. Diff. travel 8 max. Overtravel 58 min. Oper. torque 0,45 Nm [4 in-lb] max. Action CW and CCW (spring return) sensing.honeywell.com 37 HDLS Series SPECIAL APPLICATIONS EXTRA LOW TORQUE SIDE ROTARY SWITCHES (LST) LSS1H gravity-return, side-rotary switches have no return spring mechanism. The weight of the actuating lever must provide the force to restore it to the free position. The 5 in-oz. max. operating torque is useful in conveyor applications since it enables operation by small or lightweight objects. Because the head is unsealed, the LSS1H is classified as NEMA 1. However, the switch cavity is sealed to protect the switch contacts. LST1H extra-low torque, side-rotary switches have a low force return spring and a maximim operation torque of 12 in-oz. It is rated as NEMA 1 due to an unsealed head. The switch cavity is sealed to protect the switch contacts. Description Extra-low torque side rotary Circuitry SPDT, double break LSS1H Contacts Silver Gravity-return side rotary Sealing NEMA 1 Electrical rating (B) NEMA B600 Body style Plug-in Conduit (NPT) 0.5 in Pretravel 15 max. Differential travel 5 max. Overtravel 60' min. Total travel 75 nom. Operating torque 0,085 Nm [12 in-oz] max. Circuitry SPDT, double break Contacts Silver Sealing NEMA 1 Electrical rating (B) NEMA B600 Body style Plug-in Conduit (NPT) 0.5 in Differential travel 12 max. Total travel (no stop)* 360 Operating torque 0,035 Nm [5 in-oz] max. * Switch has approximately 180 dwell of the normally closed and normally open switch contacts. NOTE: Same polarity each pole. 38 LST1H Description sensing.honeywell.com NOTE: Same polarity each pole. 0 1-2 3-4 3-4 1-2 GRAVITY RETURN SIDE ROTARY SWITCHES (LSS) 10 15 75 MICRO SWITCHTM Heavy-Duty Limit Switches This datasheet supports the following MICRO SWITCHTM HDLS Series Heavy-Duty Limit Switches. LS2A4K LS2A4KC LS2A4KPC LS2A4KY-FP LS2A4L LS2A4L-RS LS2A4LX-FP LS2C4L LS2D3N LS2D4K LS2D4KC LS2D4L LS2D4LM LS2D4L-RS LS2E4K LS2E4L LS2F4K LS2F4L LS2F4L5 LS2H3K LS2H4K LS2H4L LS2H4L3 LS2M4N LS2M4N3 LS2M4NM LS2N3K LS2YAB4K LS2YAB4L LS2YAB4L5M LS2YCB4K LS2YDB4K LS2YEB4K LS2YMB4N LS2Z1A LS2Z1AB LS2Z1D LS2Z1E LS2Z1F LS2Z1H LS2Z1N LS2Z51A LS2Z51B LS2Z51D LS2Z51R LS2Z52A LS2Z52B LS2Z52D LS2Z54N LS2Z54N-C LS2Z616 LS30218 LS3A1A LS3A2B LS3A3K LS3A3K-7AA LS3A3K-7AA-RS LS3D3K LS3F1A8 LS3F1E LS3M2D LS3YDC1A LS3YDC1E LS3YVC1A LS3YVC1E LS4A1A LS4A1E LS4A1J LS4A2B LS4A3K LS4A3K-1B LS4A3K-2B LS4A3K-7AA LS4C1A LS4C3K LS4D1A LS4D3K LS4F1A LS4F2B LS4H1A LS4J1A-7A LS4J1A-7M LS4J1A-7N LS4J2B-7N LS4K1A-8A LS4K1A-8C LS4L6C LS4M2D LS4N1A LS4N2B LS4P1A LS4W1A LS4YAC1A LS4YDC1E LS4YEC1A LS4YJC1A-7N LSA1A LSA1A1 LSA1A1-1A LSA1A1-1B LSA1A1-2J LSA1A13 LSA1A14 LSA1A15 LSA1A-1A LSA1A-1B LSA1A-1C LSA1A-1D LSA1A-1F LSA1A-1L LSA1A-1M LSA1A1S LSA1A2 LSA1A2-2J LSA1A-2A LSA1A-2B LSA1A-2C LSA1A-2D LSA1A-2E LSA1A-2J LSA1A-2K LSA1A3 LSA1A3-1B LSA1A3-5C LSA1A4 LSA1A-4 LSA1A-4M LSA1A-4N LSA1A-4R LSA1A5 LSA1A-9B LSA1AA LSA1AB LSA1AB-1B LSA1AC LSA1AC-2C LSA1AC-4M LSA1AH12 LSA1E LSA1E-1B LSA1E-2A LSA1E-2D LSA1F LSA2B LSA2B15-5D LSA2B-1A LSA2B-1B LSA2B-1C LSA2B-1D LSA2B25-5D LSA2B-2A LSA2B-2B LSA2B-2C LSA2B-2D LSA2B3-5C LSA2B4 LSA2B5 LSA2F LSA2R LSA2S LSA3K LSA3K1 LSA3K1-1A LSA3K1-1B LSA3K-1A LSA3K-1B LSA3K1C-1C LSA3K-1D LSA3K-1N LSA3K-2A LSA3K-2B LSA3K-2C LSA3K-2D LSA3K-2J LSA3K3 LSA3K4 LSA3K4-1A LSA3K4-1B LSA3K4-1D LSA3K-4M LSA3K-4N LSA3K-4R LSA3K-5C LSA3KA LSA3KC LSA3N LSA3N14-2J LSA4L LSA4L1 LSA4L-1A LSA4L-1B LSA4L-1D LSA4L23 LSA4L-2A LSA4L-2B LSA4L3-1D LSA4L4 LSA4L4-1D LSA4S LSA5A LSA5A15 LSA5A-1A LSA5A-1B LSA5A-1C LSA5A-1D LSA5A25 LSA5A7B LSA5AB-1A LSA5AB-1B LSA5ADD LSA6B LSA6B1 LSA6B-1A LSA6B-1B LSA6B-1D LSA6B-1F LSA6B-1L LSA6B-2B LSA6B-2C LSA6B-2D LSA6B-3D LSA6B4-2C LSA6R LSA6S LSA7L LSA7L-1A LSA7L-1B LSA7L-1C LSA7L-1D LSA7L-2D LSA7L-2J LSA7L3-1B LSA7L4 LSA7L-4N LSA7L-4R LSA7L-5C LSA8A LSA8A7 LSA9A LSA9A-1A LSA9A23 LSA9A-2L LSA9ADD LSA9EDD LSB1A LSB1A1 LSB1A-1B LSB1A-4M LSB1A-4N LSB1AC LSB1E LSB2B LSB2R LSB3K LSB3K-1B LSB3K-1D LSB3K-2C LSB4L LSB5A LSB5A-2D LSB6B LSB6B-4N LSB7L LSB7L-1B LSB9A LSC1A LSC1E LSC2B LSC2C LSC3K LSC3KC LSC4L LSC5A LSC6B LSC7L LSC8A LSD1A LSD1A6 LSD1E LSD1F LSD2B LSD2F LSD3K LSD3K6 LSD4L LSD5A LSD5A7 LSD6B LSD7L LSD8A LSD9A LSE1A LSE1A3 LSE1A4 LSE1A5 LSE1ADD LSE1E LSE1E4 LSE2B LSE3K LSE4L LSE5A LSE6B LSE6B5 LSE6C5 LSE6S LSE7L LSE7L3 LSE9A LSF1A LSF1A3 LSF1A4 LSF1A5 LSF1A8 LSF1E LSF1F LSF2B LSF2C LSF3K LSF3K3 LSF3K4 LSF3K5 LSF3K8 LSF3N LSF4L LSF5A LSF6B LSF6B3 LSF7L LSF7L3 LSF7L4 LSF7L5 LSF7L8 LSF8A LSF9A LSG1A LSG1E LSG2B LSG3K LSG4L LSG5A LSG6B LSG7L LSG9A LSH1A LSH1A-1B LSH1A2 LSH1A-2B LSH1A-2D LSH1AB LSH1E LSH1E-1A LSH2B LSH2B-1B LSH2B-2D LSH3K LSH4L LSH4L13 LSH4L-1B LSH4L3 LSH5A LSH5A-1L LSH5A-4N LSH6B LSH6B-1B LSH7L LSH9A LSH9A7 LSJ1A LSJ1A-1N LSJ1A-7A LSJ1A-7M LSJ1A-7N LSJ1AB-7N LSJ1AC-7M LSJ1AC-7N LSJ1ADD-7A LSJ1E-7A LSJ1E-7M LSJ2B-7A LSJ2B-7M LSJ2B-7N LSJ3K LSJ3K-7A LSJ3K-7M LSJ3K-7N LSJ4L-7A LSJ4L-7M LSJ5A-7A LSJ5A-7M LSJ5A-7N LSJ6B LSJ6B-7A LSJ6B-7M LSJ6B-7N LSJ7L-7A LSJ7L-7M LSJ7L-7N LSJ8A-7A LSK1A LSK1A-8A LSK1A-8B LSK1A-8C LSK1E-8A LSK1E-8C LSK1J-8C LSK2B-8A LSK2B-8C LSK3K LSK3K-8A LSK3K-8B LSK3K-8C LSK4L-8A LSK4L-8C LSK5A-8A LSK5A-8B LSK5A-8C LSK6B LSK6B-8A LSK6B-8B LSK6B-8C LSK7L-8A LSK7L-8B LSK7L-8C LSK8A-8A LSK8A-8B LSK8A-8C LSK9A-8C LSL2C LSL2C-2D LSL2G LSL4M LSL4M4 LSL6C LSL6C-4N LSL7M LSL7M-1P LSM2D LSM2D-1A LSM2D-1B LSM2D-1D LSM2D-2D LSM2D-2J LSM2DM LSM2H LSM2U LSM4N LSM4N-1A LSM4N-1B LSM4N-2B LSM6D LSM6D-1B LSM6D-1D LSM6D-1F LSM6D-1P LSM6D-2A LSM6D-2B LSM6D3 LSM6D4 LSM6D4-5D LSM6D-5B LSM6U LSM7N LSM7N-1A LSM7N-1B LSM7N-1D LSM7N3 LSM7N-4 LSM7U LSM7U-2D LSN1A LSN1A-1B LSN1A-2C LSN1A-3A LSN1A-3B LSN1A-3D LSN1A-3P LSN1A-3S LSN1E LSN1E-1A LSN1F LSN1F-1B LSN2B LSN3K LSN3N LSN4L LSN4L-2D LSN4L-3B LSN4L-3D LSN5A LSN6B LSN6B-3B LSN6B-3D LSN7L LSN8A LSN8A37 LSN9A LSN9EDD LSP1A LSP1A-1B LSP1A-1C LSP1A-1D LSP1A2 LSP1A25 LSP1A-2A LSP1A-2D LSP1A4 LSP1A-4M LSP1A5-1C LSP1AB LSP1E LSP1E-1A LSP1F LSP2B LSP2B-1B LSP3K LSP3K-1B LSP3K-1D LSP3K3 LSP4L LSP4L3 LSP4L-4N LSP4L5 LSP5A LSP5A7 LSP6B LSP7L LSP7L-2D LSP7L3 LSP7S3 LSP8A LS-PA5A4 LSPA5D2 LSPA5D4 LSQ037 LSQ038 LSQ051 LSQ052 LSQ053 LSQ054 LSQ081 LSQ117-QC LSQ2A4L352 LSQ2H4KP227 LSQ2L4M321 LSQ300 LSQ310-20 LSQ3A3K281-VL363 LSQ3N2D3357 LSQA1A278 LSQA1A313 LSQA1A366 LSQA3K129 LSQA3K163 LSQA3K-2C-SCO LSQA3K363 LSQA6B134 LSQA6B314 LSQD3K-SCO LSQE3K318 LSQH1A322 LSQJ1A213 LSQL7M122 LSQL7M123 LSQM6D315 LSQMC7N147 LSQMC7N148 LSQMC7N311 LSQR1A316 LSQUB1A323 LSQUB7N191 LSQUC3K170 LSQUC5K272 LSQYAB1AC365 LSQYAB4L347 LSQYAB4LX249 LSQYDB3K356 LSQYFB1A344 LSQYFB3K125-QC LSQYFB3K345 LSQYFC3K223 LSQYJB1A346 LSQYMC7N361 LSQYPB3KP364 LSQYUB1A334 LSQYUB3K336 LSQYUB3K339 LSQYUB3KC319 sensing.honeywell.com 39 HDLS Series LSQZ52J LSQZ55C259 LSR1A LSR1A-1A LSR1A-1B LSR1A-2K LSR1A-4N LSR1A-5C LSR1ADD LSR1E LSR2B LSR2B-4N LSR3K LSR3K1 LSR3K-4M LSR4L LSR5A LSR6B LSR6B-2D LSR6B-2L LSR6B-4M LSR7L LSR7L-2D LSR9A LSS1H LSS1H-4N LSS1HDD LSS1HDD-C LST1H LST1H-1C LSU1A LSU1A-1 LSU1A-1B LSU1A-1D LSU1A-2B LSU1A-2D LSU1A4 LSU1A-4R LSU1E LSU2B LSU3K LSU3K1 LSU3K-1A LSU3K-2J LSU4L LSU5A LSU6B LSU7L LSU8A LSU9A LSV1A LSV1E LSV2B LSV3K LSV4L LSV5A LSV6B LSV7L LSW1A LSW1A4 LSW1A5 LSW1AC LSW1E LSW2B LSW3K LSW3N LSW4L LSW5A LSW6B LSW7L LSYAB1A LSYAB1A-1B LSYAB1A-2A LSYAB1A3 LSYAB1A-4N LSYAB1AB LSYAB1AC LSYAB1E LSYAB1E-2B LSYAB1E4-2B LSYAB1EP-1A LSYAB1F LSYAB2B LSYAB2B3 LSYAB2F LSYAB2S LSYAB3K LSYAB3K1 LSYAB3K-1B LSYAB3K2-5C 40 LSYAB3K-2J LSYAB3K-5D LSYAB3KE-FP LSYAB3KPC-FP LSYAB3KP-FP LSYAB3KQ-FP LSYAB3N LSYAB3N-4N LSYAB4L LSYAB4L-1B LSYAB4L24 LSYAB4L24-1 LSYAB4L-2A LSYAB4L360 LSYAB4L4 LSYAB4LX-FP LSYAB4S LSYAB5A LSYAB6B LSYAB6B-1B LSYAB6B-2D LSYAB7L LSYAB7L-1A LSYAB7L-2B LSYAC1A LSYAC1A1-1D LSYAC1A-1B LSYAC1A2C LSYAC1A-2D LSYAC1A-4N LSYAC1A-C LSYAC1ADD LSYAC1ADD-1B LSYAC1ADD-4N LSYAC1ADD-C LSYAC1AH LSYAC1E LSYAC1EC LSYAC2B LSYAC2R LSYAC2S LSYAC3K LSYAC3KC-FP LSYAC3KDD-FP LSYAC3KP LSYAC3KPB-FP LSYAC3KPC-FP LSYAC3KP-FP LSYAC3KQ-1BFP LSYAC3KQ-FP LSYAC3KQ-FP-C LSYAC3KY-FP LSYAC3N LSYAC4L LSYAC4L4 LSYAC4LAA-FP LSYAC4LX-FP LSYAC5A LSYAC5KPC-FP LSYAC5KP-FP LSYAC5KQ-FP LSYAC5KY-FP LSYAC6B LSYAC6B-1A LSYAC6B-1B LSYAC6B-2L LSYAC6B-4N LSYAC7L LSYAC7LR-FP LSYAC9A LSYAC9AB LSYBB1A LSYBB2B LSYBB3K LSYBB3KP-FP LSYBB4L LSYBB5KP-FP LSYBC1A LSYBC3K LSYBC3KP-FP LSYBC3KQ-FP LSYBC5A LSYBC5KP-FP LSYBC9A-1D LSYCB1A LSYCB1E LSYCB3KQ-FP LSYCB4L LSYCB4SX-FP LSYCB6B sensing.honeywell.com LSYCB9A7 LSYCC1A LSYCC1ADD LSYCC1ADD-C LSYCC1AE LSYCC3K LSYCC3KP-FP LSYCC3KQ-FP LSYCC3KY-FP LSYCC4L LSYCC4LX-FP LSYCC5A LSYCC5KP-FP LSYCC5KY-FP LSYCC6B LSYCC7L LSYDB1A LSYDB2B LSYDB3K LSYDB4L LSYDB6B LSYDB7L LSYDC1A LSYDC1ADD LSYDC1ADD-C LSYDC1AE LSYDC3K LSYDC3KPC-FP LSYDC3KP-FP LSYDC3KQ-FP LSYDC3KY-FP LSYDC4LX-FP LSYDC5A LSYDC5AC LSYDC5AE LSYDC5KP-FP LSYDC5KQ-FP LSYDC5KY-FP LSYDC6B LSYDC7L LSYDC9KP-FP LSYEB4L5 LSYEC1A LSYEC1ADD LSYEC1ADD-C LSYEC1AE LSYEC3K LSYEC3KP-FP LSYEC3KQ-FP LSYEC3KY-FP LSYEC4LX-FP LSYEC5KP-FP LSYEC5KY-FP LSYEC6B LSYFB1A LSYFB3K LSYFB3K3 LSYFB3K4 LSYFB4L LSYFB4LM LSYFB4LX-FP LSYFB7L LSYFC1A LSYFC1ADD LSYFC1ADD-C LSYFC1AE LSYFC3K LSYFC3K48P-FP LSYFC3KP-FP LSYFC3KQ-FP LSYFC3KY-FP LSYFC5KQ-FP LSYFC6B LSYFC7L LSYFC7L3 LSYFC7L4 LSYGB1A LSYGB1E LSYGC3KP-FP LSYHB1A LSYHC1A LSYHC3K LSYHC3KA LSYHC3KP-FP LSYHC4L LSYHC4LX-FP LSYHC7L LSYJB1A-7A LSYJB1A-7M LSYJB1A-7N LSYJB1E-7A LSYJB1E-7M LSYJB1J-7A LSYJB2B-7M LSYJB3K-7A LSYJB3K-7M LSYJB3K-7N LSYJB3KQ-7MFP LSYJB4L-7M LSYJB4LX-7AFP LSYJB5A-7A LSYJB6B-7M LSYJC1A-7A LSYJC1A-7M LSYJC1A-7N LSYJC1AC-7M LSYJC1ADD-7A LSYJC1ADD-7N LSYJC3K-7A LSYJC3K-7N LSYJC3KP-7AFP LSYJC3KP-7MFP LSYJC3KQ-7AFP LSYJC3KQ-7MFP LSYJC3KQ-7NFP LSYJC5KQ-7MFP LSYJC6B-7M LSYJC7LR-7MFP LSYJC7LR-7NFP LSYKB1A-8A LSYKB1A-8C LSYKB3K-8C LSYKB4L-8C LSYKB4LM-8C LSYKB6B-8C LSYKB7L-8C LSYKC1A-8A LSYKC1A-8C LSYKC1AC-8A LSYKC1AC-8C LSYKC1ADD-8C LSYKC1ADD-8C-C LSYKC1E-8C LSYKC3K-8C LSYKC3KP-8AFP LSYKC3KQ-8CFP LSYKC4L-8C LSYKC5KQ-8BFP LSYKC7LR-8AFP LSYLB4M LSYLB6C LSYLB6T LSYLB7M LSYLB7MR-FP LSYLB7T LSYLC2C LSYLC4M LSYLC4MX-FP LSYLC6C LSYMB2D LSYMB2D3 LSYMB4N LSYMB4N-1A LSYMB4N-2K LSYMB4N3X-FP LSYMB4NX-FP LSYMB6D LSYMB6D-2D LSYMB6U LSYMB7N LSYMB7N-1C LSYMB7N-1D LSYMB7N3 LSYMB7N3-1A LSYMB7U LSYMC2D-1D LSYMC4N LSYMC4NX-1BFP LSYMC4NXB-FP LSYMC4NX-FP LSYMC6D LSYMC6D-1B LSYMC6DF LSYMC6DF-1B LSYMC7N LSYMC7NDE-FP LSYMC7NR-FP LSYNB1A LSYNB1AC LSYNB2B LSYNB3K LSYNB3K-3S LSYNB3K5-3S LSYNB3KP-FP LSYNB3KQ-3BFP LSYNB4L LSYNB4L-3P LSYNB4LX-FP LSYNB5A LSYNB7L LSYNC1A LSYNC1ADD LSYNC1E LSYNC3KPC-FP LSYNC3KP-FP LSYNC3KQ-FP LSYNC4LX-FP LSYNC5KQ-FP LSYPB1A LSYPB1AC LSYPB1E LSYPB2B LSYPB2B-4N LSYPB3K LSYPB3K3 LSYPB3K4 LSYPB3KP-FP LSYPB4L LSYPB4L-1B LSYPB4L3 LSYPB4L-4N LSYPB6B LSYPB7L LSYPB7L3 LSYPC1A LSYPC1J LSYPC2B LSYPC2B-1B LSYPC3K LSYPC3KP-FP LSYPC3KQ-FP LSYPC3KY-FP LSYPC4LX-FP LSYRB1A LSYRB3KP-FP LSYRB6B LSYRC1A LSYRC1A3 LSYRC1ADD LSYRC1ADD-C LSYRC1E3 LSYRC2B LSYRC3KP-FP LSYRC4L LSYRC4LX-FP LSYRC5KP-FP LSYRC5KQ-FP LSYRC9A LSYUB1A LSYUB1A13 LSYUB1A13-2A LSYUB1A13-2B LSYUB1A23 LSYUB1A23-2D LSYUB1A3 LSYUB2B LSYUB3K LSYUB6B LSYUB6B13 LSYUB6B3 LSYUB9AC LSYUC1A LSYUC1A-1B LSYUC1ADD LSYUC2B LSYUC3KP-FP LSYUC3KQ-FP LSYUC3KY-FP LSYUC4LX-FP LSYUC5KQ-FP LSYUC6B LSYUC9ADD LSYVB1A LSYVB2B LSYVB3K LSYVB4L LSYVC1A LSYVC3KP-FP LSYVC3KQ-FP LSYVC3KY-FP LSYVC7L LSYWB1A LSYWB3K LSYWB3KQ-FP LSYWC1A LSYWC1ADD LSYWC1F LSYWC3KP-FP LSYWC3KY-FP LSYWC5KQ-FP LSYWC6B LSYWC7L LSZ51 LSZ51A LSZ51B LSZ51B-C LSZ51C LSZ51CA LSZ51D LSZ51D-C LSZ51F LSZ51G LSZ51J LSZ51L LSZ51M LSZ51N LSZ51P LSZ51R LSZ51T LSZ51U LSZ51W LSZ51Y LSZ52 LSZ52A LSZ52B LSZ52C LSZ52D LSZ52E LSZ52J LSZ52K LSZ52L LSZ52M LSZ52N LSZ52R LSZ52W LSZ52Y LSZ53 LSZ53A LSZ53B LSZ53D LSZ53E LSZ53M LSZ53P LSZ53S LSZ53U LSZ53W LSZ54 LSZ54M LSZ54N LSZ54NA LSZ54N-C LSZ54P LSZ54R LSZ54SM LSZ54T LSZ54V LSZ54W LSZ55 LSZ55A LSZ55B LSZ55C LSZ55D LSZ55E LSZ55F LSZ55K LSZ55W LSZ55Y LSZ56 LSZ56A LSZ56B LSZ56C LSZ56D LSZ56E LSZ56J LSZ56K LSZ56L LSZ56M LSZ56N LSZ581B LSZ59 LSZ59A LSZ59AC LSZ59B LSZ59C LSZ59D LSZ59L LSZ60A LSZ60B LSZ61 LSZ616 LSZ617 LSZ618 LSZ65AA LSZ65AB LSZ65AF LSZ65BA LSZ65CA LSZ65CB LSZ65CD LSZ65DA LSZ65DB LSZ65DC LSZ65DD LSZ65EA LSZ65EB LSZ65ED LSZ65EE LSZ65FA LSZ65FB LSZ65FD LSZ65FF LSZ65GA LSZ65GB LSZ65HA LSZ65HB LSZ65HC LSZ65HD LSZ65HE LSZ65JA LSZ65JB LSZ65JD LSZ65JE LSZ65JF LSZ65KA LSZ65KB LSZ65LA LSZ65LB LSZ67AA LSZ68 LSZ686 LSZ69CA LSZ69DA MICRO SWITCHTM Heavy-Duty Limit Switches ALSO AVAILABLE Fully potted MICRO SWITCHTM HDLS heavy-duty limit switches provide an extra degree of protection in harsh environments by sealing the basic switch cavity with epoxy. These switches are the same as the non- plug-in HDLS except that the entire switch cavity is filled with epoxy in addition to the conduit entrance. The fully potted HDLS switches are pre-leaded, with either cable or connectors. * Excellent sealing capability for harsh-duty food and beverage wash downs and severe machine tool environments * Diaphragm sealing * 12 inch STOOW-A cable (other lengths available) or connector version * Cable versions: NEMA 1, 6, 6P, 12 * Connector versions: NEMA 1, 6, 6P, 12, 13 * All fluorocarbon seals (low temperature fluorosilicone seals available) * UL, CSA, CE, CCC MICRO SWITCHTM HDLS switches are also available in all stainless-steel versions. Designed for use in highly corrosive environments, such as petrochemical plants, food processing plants, shipboard, and dockside locations. The type 316 cast stainless steel body is designed to minimize crevices where food particles could become trapped in water. The actuator, operating head, and screws are also stainless steel. All seals are fluorocarbon to provide excellent chemical resistance and to withstand operating temperatures up to 121 C [250 F] and pressurized steam cleaning. Pre-leaded and epoxy-filled versions also available. * Corrosion-resistant stainless steel non-plug in body, head, and rotary shaft * Stainless steel levers * Fluorocarbon seals (low temperature fluorosilicone seals available) * NEMA 1, 3, 3R, 4, 4X, 6, 6P, and 13 * UL, CSA, CE, CCC To learn more about Honeywell's HDLS products, call +1-815-235-6847 or 1-800-537-6945. sensing.honeywell.com 41 HDLS Series ADDITIONAL INFORMATION The following associated literature is available on the Web at sensing.honeywell.com: * Product installation instructions * Product range guide * Product nomenclature tree * Product application-specific information WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. - Application Note: Sensors and Switches in Oil Rig Applications - Application Note: Sensors and Switches for Industrial Manual Process Valves - Application Note: Sensors and Switches Used in Valve Actuators and Valve Positioners WARNING MISUSE OF DOCUMENTATION * * The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. 42 sensing.honeywell.com Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell's sensing and control products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 honeywell.com 002345-5-EN IL50 GLO September 2014 Copyright (c) 2014 Honeywell International Inc. All rights reserved.