VS-10BQ030PbF www.vishay.com Vishay Semiconductors High Performance Schottky Rectifier, 1.0 A FEATURES * Small foot print, surface mountable * Very low forward voltage drop Cathode Anode * High frequency operation * Guard ring for enhanced ruggedness and long term reliability * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C SMB * Designed and qualified for industrial level * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRODUCT SUMMARY Package SMB IF(AV) 1.0 A VR 30 V VF at IF 0.420 V IRM max. 15 mA at 125 C TJ max. 150 C Diode variation Single die EAS 3.0 mJ DESCRIPTION The VS-10BQ030PbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS IF(AV) VALUES UNITS 1.0 A 30 V Rectangular waveform VRRM IFSM tp = 5 ms sine 430 A VF 1.0 Apk, TJ = 125 C 0.30 V TJ Range -55 to +150 C VS-10BQ030PbF UNITS 30 V VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average forward current IF(AV) 50 % duty cycle at TL = 106 C, rectangular waveform 1.0 A Maximum peak one cycle non-repetitive surge current See fig. 6 5 s sine or 3 s rect. pulse 430 IFSM Non-repetitive avalanche energy Repetitive avalanche current 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied A 90 EAS TJ = 25 C, IAS = 1 A, L = 6 mH 3.0 mJ IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 1.0 A Revision: 19-May-14 Document Number: 94111 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-10BQ030PbF www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 1A VFM (1) Maximum forward voltage drop VALUES 0.420 TJ = 25 C 2A 1A 0.470 0.370 TJ = 25 C Maximum reverse leakage current IRM (1) V 0.300 TJ = 125 C 2A UNITS 0.5 TJ = 100 C VR = Rated VR mA 5.0 TJ = 125 C 15 Maximum junction capacitance CT VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 C 200 pF Typical series inductance LS Measured lead to lead 5 mm from package body 2.0 nH 10 000 V/s VALUES UNITS -55 to +150 C Maximum voltage rate of change dV/dt Rated VR Note (1) Pulse width < 300 s, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ (1), TStg Maximum thermal resistance, junction to lead RthJL (2) Maximum thermal resistance, junction to ambient RthJA TEST CONDITIONS DC operation 25 C/W 80 Approximate weight Marking device 0.10 g 0.003 oz. Case style SMB (similar DO-214AA) V1E Notes IF - Instantaneous Forward Current (A) (2) dP tot 1 ------------- < -------------- thermal runaway condition for a diode on its own heatsink dT J R thJA Mounted 1" square PCB 10 10 TJ = 125 C IR - Reverse Current (mA) (1) TJ = 125 C TJ = 25 C 1 0.1 TJ = 100 C 1 TJ = 75 C 0.1 TJ = 50 C 0.01 TJ = 25 C 0.001 0.0001 0 0.2 0.4 0.6 0.8 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 0 10 20 30 VR - Reverse Voltage (V) Fig. 2 - Typical Peak Reverse Current vs. Reverse Voltage Revision: 19-May-14 Document Number: 94111 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-10BQ030PbF www.vishay.com Vishay Semiconductors 0.5 Average Power Loss (W) CT - Junction Capacitance (pF) 1000 TJ = 25 C 100 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 0.4 0.3 DC 0.2 RMS limit 0.1 0 10 0 10 20 0 30 Square wave (D = 0.50) 80 % rated VR applied DC D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 100 See note (1) 90 0.4 0.8 1.2 1.6 IFSM - Non-Repetitive Surge Current (A) Allowable Case Temperature (C) 130 0 1.6 1.2 Fig. 5 - Maximum Average Forward Dissipation vs. Average Forward Current Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 110 0.8 IF(AV) - Average Forward Current (A) VR - Reverse Voltage (V) 120 0.4 1000 100 At any rated load condition and with rated VRRM applied following surge 10 10 100 1000 10 000 IF(AV) - Average Forward Current (A) tp - Square Wave Pulse Duration (s) Fig. 4 - Maximum Average Forward Current vs. Allowable Lead Temperature Fig. 6 - Maximum Peak Surge Forward Current vs. Pulse Duration Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR Revision: 19-May-14 Document Number: 94111 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-10BQ030PbF www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 10 B Q 030 TR PbF 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Current rating 3 - B = single lead diode 4 - Q = Schottky "Q" series 5 - Voltage rating (030 = 30 V) 6 - None = box (1000 pieces) TR = tape and reel (3000 pieces) - 7 PbF = lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information www.vishay.com/doc?95029 Tape and reel www.vishay.com/doc?95034 Bulk www.vishay.com/doc?95397 Revision: 19-May-14 Document Number: 94111 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay High Power Products SMB DIMENSIONS in millimeters (inches) 2.15 (0.085) 1.80 (0.071) 3.80 (0.150) 3.30 (0.130) 1 2 1 Polarity 4.70 (0.185) 4.10 (0.161) 2.5 TYP. (0.098 TYP.) 2 Part Number Soldering pad 2.40 (0.094) 1.90 (0.075) 1.30 (0.051) 0.76 (0.030) 5.60 (0.220) 5.00 (0.197) 0.30 (0.012) 0.15 (0.006) 2.0 TYP. (0.079 TYP.) 4.2 (0.165) 4.0 (0.157) Document Number: 95017 Revision: 25-Jun-07 For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com www.vishay.com 1 Outline Dimensions Vishay Semiconductors SMB DIMENSIONS in inches (millimeters) DO-214AA (SMB) Cathode band Mounting Pad Layout 0.085 (2.159) MAX. 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.077 (1.95) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.060 (1.52) MIN. 0.012 (0.305) 0.006 (0.152) 0.220 (5.59) REF. 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) Document Number: 95401 Revision: 09-Jul-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: 10BQ030 10BQ030TR VS-10BQ030PBF VS-10BQ030TRPBF