www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31025
52 Revision: 11-Mar-10
ERC (Military RNC/RNR)
Vishay Dale
Metal Film Resistors, Military/Established Reliability,
MIL-PRF-55182 Qualified, Precision, Type RNC, Characteristics J, H, K
FEATURES
•Meets requirements of MIL-PRF-55182
•Very low noise (- 40 dB)
•Verified failure rate (contact factory for current level)
•100 % stabilization and screening tests. Group A testing, if
desired, to customer requirements
•Controlled temperature coefficient
•Epoxy coating provides superior moisture protection
•Standard lead on RNC product is solderable and weldable
•Traceability of materials and processing
•Monthly acceptance testing
•Vishay Dale has complete capability to develop specific
reliability programs designed to customer requirements
•Extensive stocking program at distributors and factory on
RNC50, RNC55, RNC60 and RNC65
•For MIL-PRF-55182 characteristics E and C product, see
Vishay Angstrohm’s HDN (Military RNR/RNN) datasheet
Notes
(1) Consult factory for current QPL failure rates.
(2) Continuous working voltage shall be or maximum working voltage, whichever is less.
(3) Hot solder dipped leads
(4) Standard resistance tolerances: ± 0.1 % (B), ± 0.5 % (D) and ± 1 % (F). ± 0.1 % not applicable to characteristic K.
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY
DALE
MODEL
MIL-PRF-55182
STYLE
MIL
SPEC.
SHEET
POWER
RATING TOLERANCE
(4)
± %
MAXIMUM
WORKING
VOLTAGE
(2)
V
RESISTANCE RANGE
Ω
LIFE
FAILURE
RATE
(1)
P
70 °C
W
P
125 °C
W
± 100 ppm/°C
(K)
± 50 ppm/°C
(H)
± 25 ppm/°C
(J)
ERC50,
ERC50..31
(3)
RNC50, RNR50 07 0.10 0.05 0.1, 0.5, 1 200 10 to 796K M, P, R, S
ERC55,
ERC55..65
(3)
RNC55, RNR55 01 0.125 0.10 0.1, 0.5, 1 200 10 to 2M M, P, R, S
ERC55..200,
ERC55..201
(3)
RNC60, RNR60 03 0.25 0.125 0.1, 0.5, 1 250 10 to 2M M, P, R, S
2.01M to 3.01M M
ERC65,
ERC65..65
(3)
RNC65, RNR65 05 0.50 0.25 0.1, 0.5, 1 300 10 to 3.01M M, P, R
ERC70
ERC70..4
(3)
RNC70, RNR70 06 0.75 0.50 0.1, 0.5, 1 350 10 to 3.01M M, P, R
P x R
TECHNICAL SPECIFICATIONS
PARAMETER UNIT CONDITION
Voltage Coefficient, max. ppm/V 5/V when measured between 10 % and full rated voltage
Dielectric Strength VAC RNC50, RNC55 and RNC60 = 450; RNC65 and RNC70 = 900
Insulations Resistance Ω≥ 1011 dry; ≥ 109 after moisture test
Operating Temperature Range °C - 65 to + 175
Terminal Strength lb 2 lb pull test on RNC50, RNC55, RNC60 and RNC65; 4.5 lb pull test on RNC70
Solderability Continuous satisfactory coverage when tested in accordance with MIL-STD-202, Method 208
Weight g RNC50 = 0.11; RNC55 = 0.35; RNC60 = 0.35; RNC65 = 0.84; RNC70 = 1.60
Document Number: 31025 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 11-Mar-10 53
ERC (Military RNC/RNR)
Metal Film Resistors, Military/Established Reliability,
MIL-PRF-55182 Qualified, Precision, Type RNC, Characteristics J, H, K Vishay Dale
Note
(1) 1.08 ± 0.125 (27.43 ± 3.18) if tape and reel
POWER RATING
Power ratings are based on the following two conditions:
1. ± 2.0 % maximum ΔR in 10 000 h load life
2. + 175 °C maximum operating temperature
GLOBAL PART NUMBER INFORMATION
MIL STYLE RESISTANCE
VALUE CODE
RNC = Solderable/ J
= ± 25 ppm
3 digit significant B = ± 0.1 %
D = ± 0.5 %
F = ± 1 %
M = 1.0 %/1000 h B14 = Tin/lead, bulk
BSL = Tin/lead, bulk,
single lot date code
R36 = Tin/lead,
T/R (full; 50, 55, 60)
R64 = Tin/lead,
T/R (full; 65, 70)
RE6 = Tin/lead,
T/R (1000 pieces)
RSL = Tin/lead, T/R,
single lot date code
weldable figure, followed P = 0.1 %/1000 h (Dash number)
RNR = Solderable by a multiplier
Use “R” for
values < 100 Ω
R = 0.01 %/1000 h (Up to 3 digits)
only
10R0 = 10 Ω
S = 0.001 %/1000 h From 1 to 999
2152 = 21.5 k Ω
as applicable
3014 = 3.01 M Ω
New Global Part Numbering: RNC55H2152FRR36 (preferred part numbering format)
RNC55H215 2FRR36
Historical Part Number example: RNC55H2152FR R36 (will continue to be accepted)
RNC55 H 2152 F R R36
MIL STYLE CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE FAILURE RATE PACKAGING
(see Standard
Electrical
Specifications
table)
Blank = Standard
SPECIAL
4
= Hot solder dip (70’s)
31
= Hot solder dip (50’s)
65
= Hot solder dip
(55’s, 65’s)
201
= Hot solder dip (60’s)
CHARACTERISTICS FAILURE
RATE PA C K AG I NG
K
= ± 100 ppm
H
= ± 50 ppm
TOLERANCE
DIMENSIONS in inches (millimeters)
A
D
B
E (1)
C
(Max.)
VISHAY DALE
MODEL
MIL-PRF-55182
STYLE AB
C
(Max.) DE
ERC50 RNC50,
RNR50
0.150 ± 0.020
(3.81 ± 0.51)
0.070 ± 0.010
(1.78 ± 0.25)
0.187
(4.75)
0.016 ± 0.002
(0.41 ± 0.05)
1.25 ± 0.266
(31.75 ± 6.76)
ERC55 RNC55,
RNR55
0.250 + 0.031 - 0.046
(6.35 + 0.79 - 1.17)
0.094 ± 0.012
(2.39 ± 0.30)
0.300
(7.62)
0.025 ± 0.002
(0.64 ± 0.05)
1.50 ± 0.125
(38.1 ± 3.18)
ERC55..200 RNC60,
RNR60
0.280 ± 0.020
(7.11 ± 0.51)
0.097 ± 0.012
(2.46 ± 0.30)
0.350
(8.89)
0.025 ± 0.002
(0.64 ± 0.05)
1.50 ± 0.125
(38.1 ± 3.18)
ERC65 RNC65,
RNR65
0.562 ± 0.031
(14.27 ± 0.79)
0.180 ± 0.015
(4.57 ± 0.38)
0.687
(17.45)
0.025 ± 0.002
(0.64 ± 0.05)
1.50 ± 0.125
(38.1 ± 3.18)
ERC70 RNC70,
RNR70
0.562 ± 0.031
(14.27 ± 0.79)
0.180 ± 0.015
(4.57 ± 0.38)
0.687
(17.45)
0.032 ± 0.002
(0.81 ± 0.05)
1.50 ± 0.125
(38.1 ± 3.18)
MATERIAL SPECIFICATIONS
Element Vacuum-deposited nickel-chrome alloy
Core Fire-cleaned high purity ceramic
Encapsulation Specially formulated epoxy compound
Termination
Standard lead material is solder-coated
copper Solderable and weldable per
MIL-STD-1276, Type C
APPLICABLE MIL-SPECIFICATIONS
MIL-PRF-55182:
The ERC series meets the electrical, environmental and
dimensional requirements of MIL-PRF-55182.
MIL-R-10509:
MIL-PRF-55182 supercedes MIL-R-10509 on new designs.
The ERC series meets or exceeds MIL-R-10509
requirements.
Documentation:
Qualification and failure rate verification test data is
maintained by Vishay Dale and is available upon request.
Lot traceability and identification data is maintained by
Vishay Dale for five years.
CAGE CODE: 91637
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31025
54 Revision: 11-Mar-10
ERC (Military RNC/RNR)
Vishay Dale Metal Film Resistors, Military/Established Reliability,
MIL-PRF-55182 Qualified, Precision, Type RNC, Characteristics J, H, K
Vishay Dale ERC resistors have an operating temperature range of - 65 °C to + 175 °C. They must be derated according to the
following curve:
MARKING
- Per MIL-PRF-55182
0 25 50 75 100 150 175 200
125
AMBIENT TEMPERATURE IN °C
DERATING
RATED POWER IN %
0
20
40
60
80
100
120
- 65 - 50 - 25
0
20
40
60
80
100
120
APPLIED POWER IN W
HEAT RISE (°C ABOVE AMBIENT)
0 0.125 0.25 0.375 0.5 0.625 0.75 0.875 1 1.125
THERMAL RESISTANCE
ERC50
ERC55,
ERC55-200
ERC65,
ERC70
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
