Features Protects subscribers and equipment from destructive power crosses and lightning surges Reduces frequency of service calls Increases reliability of network operation Reduces cost of network maintenance Listed per UL 497* 1965 Series - 50 Ohm Coaxial Surge Protector The Bourns 1965 Series Coaxial Surge Protector is intended for use with low power VHF and UHF transmitters, 2-way base station transceivers, and receive-only systems. All models provide GDT technology. The 1965 arrester is symmetric and bidirectional. Either end may be used for the input or output. Various power and voltage choices are available - see specifications below for proper selection. Available with a choice of connectors. Note: The arrester ground plate is common with the connector body; hence the coax cable shields will be grounded at their connection to the arrester. Characteristics Characteristic Impedance ...................................................................................................................... 50 Frequency Characteristics (DC - 1 GHz) VSWR (Max.) ................................................................................................................................... <1.2:1 Transmission/Insertion Loss (Max.) ................................................................................................. <0.2 dB Impulse Discharge 20 kA, 8/20 s .................................................................................................................................. 1 time 10 kA, 8/20 s .................................................................................................................................. 10 times 500 A, 10/1000 s ............................................................................................................................ 500 times Arc Voltage (during discharge) .............................................................................................................. 10 V Operating Temperature.......................................................................................................................... -40 to +85 C Maximum Operating Altitude ................................................................................................................. 7,000 m Impulse Sparkover (100 V/s) 1965-20* 1965-35 1965-50 1965-60 100 V/s ..............................................400 V ...................... 550 V ...................... 700 V ................. 600 V 1 kV/s ................................................500 V ...................... 650 V ...................... 800 V ................. 850 V 10 kV/s ..............................................650 V ...................... 800 V ...................... 900 V ................. 1100 V *Model 1965-20-Axx is UL Listed per UL 497 for indoor/outdoor use in a listed, compatible NID. VSWR and Insertion Loss 0 1.00 VSWR .025 1.02 1.04 .050 Insertion Loss (-dB) 1.06 .075 INSERTION LOSS .100 1.08 .125 1.10 .150 1.12 .175 1.14 .200 1.16 0 100 200 300 400 500 600 700 800 900 VSWR 1000 Frequency (MHz) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 1965 Series - 50 Ohm Coaxial Surge Protector How to Order How to Order Connector Fittings Part No. Description 1965-xx-A00 ....... N(f) and N(f) 1965-xx-A01 ....... N(f) and N(m) 1965-xx-A04 ....... BNC(f) and BNC(f) 1965-xx-A05 ....... BNC(f) and BNC(m) 1965-xx-A12 ....... UHF(f) and UHF(f) Power (Watts) 10 3 10 2 8 6 4 1965-60 1965-50 1965-35 2 1965-20 2 4 6 8 10 5 10 6 107 108 10 9 Frequency (Hz) Note: Radio frequency and transmit power should be known. The above curves apply to systems with a VSWR of 1.2:1 or less. Choose the protector whose curve lies first above the power-frequency coordinates of the radio system. For systems with a VSWR in excess of 1.2:1, or for a more exact determination if desired, multiply the actual radio power by the expression 0.83[2xVSWR/(1+VSWR)]2, and use this new power value to enter the graph. Product Dimensions 5.3 (.209) 41.0 (1.61) 4.5 DIA. (.177) 3.3 (0.13) DIMENSIONS: 46 (1.81) MM (INCHES) 57.0 (2.24) Asia-Pacific: Tel: +886-2 2562-4117 * Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 * Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 * Fax: +1-951 781-5700 www.bourns.com REV. J 04/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.