Accessories for Safety Switches Actuators for safety switches NZ.VZ, NZ.VZ.VS and TZ Dimension drawings 6 15 6 70 15 100 6 3 15 6 20 20 O5,5 100 Actuator with overtravel 4 mm for doors with normal play 16 mm for doors with large play (optional) O5,5 Straight actuator The straight actuator is used on sliding doors or hinged doors with door radii greater than 1000 mm. Safety screws prevent unscrewing of the actuator. The safety screws included can be inserted with a normal tool, but cannot be removed again. Actuator Z-GME straight Overtravel 4 mm, solid stainless steel Actuator Z-G straight Overtravel 4 mm 70 Two stainless safety screws per actuator Increased overtravel optional Packaging unit 25 pieces optional 3 15 Actuator Z-GN straight Overtravel 16 mm 15 6 20 O5,5 112 82 6 3 15 110 Subject to technical modifications; no responsibility is accepted for the accuracy of this information. Accessories for Safety Switches Selection table for actuators Actuator Actuator straight Z-G 016 849 overtravel 4 mm TZ-LE NZ TZ-RE Actuator straight Z-GME 097 436 overtravel 4 mm TZ-LE NZ TZ-RE Actuator straight Z-GN 072 251 overtravel 16 mm TZ-LE NZ TZ-RE Straight actuator Z-G 016 849 Z-GME 097 436 Z-GN 072 251 Ordering table Designation Version Z-G 4 mm overtravel incl. 2 safety screws M5 x 10 Z-GME 4 mm overtravel, made of solid stainless steel incl. 2 safety screws M5x10 Z-GN 16 mm overtravel incl. 2 safety screws M5x10 Packaging unit Order No. 1 ea. ACTUATOR-Z-G 25 ea. ACTUATOR-Z-G/V25 1000 1000 1 ea. 1000 1 ea. 016 849 074 411 097 436 ACTUATOR-Z-GME 072 251 ACTUATOR-Z-GN For safety precautions see page 179 For technical data see page 151 Actuator straight Min. door radius r [mm] Subject to technical modifications; no responsibility is accepted for the accuracy of this information. 111