Common Mode Filters For general signal line ZJYS series Type: ZJYS51 Issue date: September 2011 * All specifications are subject to change without notice. * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. (1/4) Common Mode Filters For General Signal Line Conformity to RoHS Directive ZJYS Series ZJYS51 FEATURES * A common mode filter for distortion-free noise removal from transmission signals. Optimized for transmission of high quality signals. * Best filter for countering the common mode noise resulting from data signal processing by PCs, phone equipment, etc. * SMD-type designed for surface mounting. * Due to a maximum current tolerance of 2A, can also be used to counter power line noise. APPLICATIONS Personal computers, telephones, LANs, ISDNs, digital PBXs, electronic games, CTVs, CD-ROM drives, 8mm video equipment, and other electronic devices. RECOMMENDED SOLDERING CONDITIONS RECOMMENDED TEMPERATURE PROFILE FOR LEAD-FREE SOLDER Peak 245C max. 230C 180C 150C 60 to 120s Part No. ZJYS51R5-2P(T)-01 ZJYS51R5-2PB(T)-01 ZJYS51R5-2PL(T)-01 ZJYS51R5-4P(T)-01 ZJYS51R5-M4PA(T)-01 REFLOW PROFILE FOR SOLDER HEAT RESISTANCE Peak 260C max. Bulk 200 pieces 200 pieces 200 pieces 100 pieces 100 pieces 10 to 30s Time (s) PACKAGING STYLE AND QUANTITIES Taping (reel) 1500 pieces 1500 pieces 1500 pieces 1000 pieces 1000 pieces Natural cooling Natural cooling 230C 180C 150C 60 to 120s 40s max. Time (s) * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * All specifications are subject to change without notice. 001-03 / 20110926 / e971_zjys (2/4) SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERNS TRANSFER MOLD ZJYS51R5-2P(T)-01, -2PB(T)-01, -2PL(T)-01 ZJYS51R5-4P(T)-01, -M4PA(T)-01 A A 8 7 6 5 6.7 9.9 3 6.7 9.9 4 1.8 1.6 1.6 1.8 2.54 2.54 2.54 2.54 1 2 1 G 2 3 4 G B (0.6) Weight: 0.4g H D C H F E 0.1max. 0.1min. D C B (0.6) F E Weight: 0.8g Dimensions in mm Part No. A max. B max. C max. ZJYS51R5-2P(T)-01, -2PB(T)-01, -2PL(T)1-012 5.5 6.86 4.57 ZJYS51R5-4P(T)-01, -M4PA(T)-01 10.5 6.86 4.57 1 T means the taping product. 2 The "-01" designation at the end of the product code indicates lead-free compatible product. CIRCUIT DIAGRAMS ZJYS51R5-2P(T)-01,-2PB(T)-01, -2PL(T)-01 D max. 5.08 5.08 E 1.3 1.3 F 2.540.25 2.540.25 G max. 90.5 90.5 H 0.25 0.25 ZJYS51R5-4P(T)-01, -M4PA(T)-01 L1 L 2 4 3 L1 L 2 L 3 L 4 8 7 6 5 1 2 1 2 3 4 * All specifications are subject to change without notice. 001-03 / 20110926 / e971_zjys (3/4) ELECTRICAL CHARACTERISTICS ZJYS51R5-2P(T)-01, 4P(T)-01 50 2 ZJYS51R5-2PB(T)-011 ZJYS51R5-2PL(T)-012 ZJYS51R5-M4PA(T)-01 50 2 50 2 50 0.5 125 125 250 125 100 min. 100 min. 100 min. 100 min. 0.12 max. -25 to +85 200 min.[20 to 300MHz] 0.12 max. -25 to +85 300 min.[6 to 20MHz] 0.10 max. -25 to +85 100 min.[20 to 100MHz] 0.25 max. -25 to +85 200 min.[20 to 300MHz] Part No. Rated voltage Edc(V) Rated current (A) Test voltage Edc(V) [Between terminals for 5s] Insulation resistance (M ) [Between terminals at DC.50V for 1min] DC resistance ( ) [Each line] Operating temperature range (C) Impedance ( ) [+5 to +35C] 1 The improvement type on low area characteristics. winding type (for communications). * The "T" designation at the end of the product code indicates tape mounting. 2 Separate TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS (for 1 element) ZJYS51R5-2P-01, 4P(T)-01 ZJYS51R5-2PB-01 1000 Common mode Impedance () Impedance () 1000 100 Differential mode 10 1 1 ZJYS51R5-2PL-01 10000 10000 Common mode 1000 Impedance () 10000 100 Differential mode 10 3 10 30 100 Frequency (MHz) 300 1000 1 1 Common mode 100 Differential mode 10 3 10 30 100 Frequency (MHz) 300 1000 1 1 3 10 30 100 Frequency (MHz) 300 1000 ZJYS51R5-M4PA-01 10000 Impedance () 1000 Common mode 100 10 1 1 Differential mode 3 10 30 100 Frequency (MHz) 300 1000 MEASURING CIRCUIT Vector impedance meter Vector impedance meter (YHP 4191A equivalent) Measuring at each Common mode choke coil * All specifications are subject to change without notice. 001-03 / 20110926 / e971_zjys (4/4) TYPICAL APPLICATION An application example showing how radiation noise is prevented when transmitter and receiver are connected via twisted pair cables. Transmitter Receiver TYPICAL APPLICATION EFFECTS (a) Without EMC filter Radiation field intensity (dBV/m) 80 70 60 VCCI-2 50 40 30 20 10 0 30 100 300 Frequency (MHz) 1000 (b) With EMC filter (b) ZJYS51R5-2P(T)-01 Radiation field intensity (dBV/m) 80 70 60 VCCI-2 50 40 30 20 10 0 30 100 300 Frequency (MHz) 1000 * All specifications are subject to change without notice. 001-03 / 20110926 / e971_zjys