To : DIGI-KEY CORPORATION Issue No. : 151EYG101014007 Date of Issue : 14.Oct.2010 Classification : New Changed SPECIFICATION SHEET Product Description Product Part Number : : PGS Graphite Sheet EYGA121807M Customers Part Number Country of Origin Applications : : : Japan Circuit Components Business Unit Panasonic Electronic Devices Co.,Ltd. 1037-2 Kamiosatsu, Chitose City, Hokkaido 066-8502 Japan Engineering Section Prepared by : Phone : +81-123-23-8149 (Direct) CLASSIFICATION SPECIFICATION SHEET SUBJECT No. 151S- EYGA121807M PAGE 1 of 4 Part Number PGS Graphite Sheet EYGA121807M DATE 14.Oct.2010 1.Scope This specification applies to Panasonic's PGS Graphite Sheet 2.Explanation of Part Number Subject : PGS Graphite Sheet Part Number : EYGA121807M E Y G A 1 2 1 8 0 7 M Shorter Side Product Code (cm) Longer Side Design Number Form Thickness (cm) Code Thickness Code Form S Sheet 10 0.1mm 07 0.07mm M Multi-layered A Tape attached 03 0.025mm 02 0.017mm 3.Operating and storage Temperature Range Operating Temperature Range : -20 to 100 cels. Storage Temperature Range : -20 to 80 cels. 4.Performance 4-1.Appearance Contents 4-1-1 Appearance Performance There shall be no mechanical scars,tears,hollows which affect the performance 4-1-2 Shown in the figure Shape and Dimension Page 4 of 4 4-2.Initial Performance Contents 4-2-1 Thermal Diffusivity Performance 2 More than 5.0 cm /sec ( PGS ) 4-3. Reliability Tests Contents 4-3-1 Damp Heat Test Test Method Compared with limit sample -- Test Method Test piece;30mmx5mm sheet Testing equipment;"Laser Pit" Model PIT-IM type (The Manufacturer of the Equipment is SINKU-RIKO) Performance Test Method Shall meet the performance Test temperature : 853 cels. prescribed clause 4-1 and 4-2-1 Relative humidity : 855 %RH Test period : 1000 hours Circuit Components Business Unit Panasonic Electronic Devices Co.,Ltd. 1037-2 Kamiosatsu, Chitose City, Hokkaido, Japan APPROVAL CHECK DESIGN Funaba Kubo Kawamura CLASSIFICATION SPECIFICATION SHEET SUBJECT Part Number PGS Graphite Sheet EYGA121807M No. 151S- EYGA121807M PAGE 2 of 4 DATE 14.Oct.2010 4-3-2 Temperature cycle Shall meet the performance Condition the specimen to each prescribed clause 4-1 and 4-2-1 temperature from 1 to 4 for the period shown in the table below. Regarding this conditions as one cycle, perform 1000 cycles continuously. step temperature period(min) -20 cels. 1 10 2 Room Temp. 3 max. +105 cels. 3 10 4 Room Temp. 3 max. 4-3-3 High Temperature Resistance 4-3-4 Low Temperature Resistance Test temperature : 100 cels. Shall meet the performance prescribed clause 4-1 and 4-2-1 Test period : 1000 hours Test temperature : -20 cels. Shall meet the performance prescribed clause 4-1 and 4-2-1 Test period : 1000 hours 5. Packaging 10 sheets of PGS Graphite Sheets shall be put in a plastic bag and the plastic bag shall be sealed. Maximum 20 plastic bags shall be put in an inner carton and a tag on goods specifying Product Name, Part No., Lot No, Quantity shall be put on the top face of the inner carton. (Max 200 pcs. per inner carton) Maximum 5 inner cartons shall be put in an outer packaging box and a label specifying Product Name, Part No., Lot No, Quantity (Max 1,000 pcs.), County of Origin in English shall be put on the side of the outer packaging box. 6. Handling Precautions 6.1 ! Safety Precaution 6.1.1 The PGS shall be used within the specified operating temperature range. 6.1.2 The PGS is soft, do not rub or touch it with rough materials to avoid scratching it. 6.1.3 Lines or folds in the PGS may affect thermal conductivity. 6.1.4 The PGS shall not be used with acid. The PGS shall not be used in contact with a soldering iron at 400 or more. 6.1.5 The PGS shall not be exposed to salt water or direct sunlight during use. The PGS shall not be used in corrosive gases (hydrogen sulfide, sulfurous acid, chlorine, ammonia etc.) 6.1.6 Our PGS has been developed for general industry application. Prior to using the PGS for special applications such as medical, aerospace and aircraft work please contact our engineering staff or the factory. 6.1.7 Never touch a PGS during use because it may be extremely hot. Note: CLASSIFICATION SPECIFICATION SHEET SUBJECT Part Number PGS Graphite Sheet EYGA121807M No. 151S- EYGA121807M PAGE 3 of 4 DATE 14.Oct.2010 6.2 Application notes 6.2.1 Use protective materials when handling and/or applying the PGS, do not use items with sharp edges as they might tear or puncture the PGS. 6.2.2 The PGS dose not work properly if overheated. 6.2.3 Thermal conductivity is dependant on the way it is used. Test the adaptability of PGS to your application before use. 6.2.4 The PGS has conductivity. If required, the PGS should be provided insulation. 6.2.5 Punching Graphite sheets sends graphite powder; therefore, your check whether or not the graphite powder fall harms devices is necessary. 6.2.6 The PGS shall not be stored under severe conditions of salt water, direct sunlight or corrosive gases (hydrogen sulfide, sulfurous acid, chlorine, ammonia etc.). The PGS shall not be stored near acid. 7.Substance of this product 7-1 This product not been manufactured with any ozone depleting chemical controlled under the Montreal Protocol. 7-2 This product comply with RoHS(Restriction of the use of certain Hazardous Substance in electrical and electronic equipment) Directive(2002/95/EC). 7-3 All the materials used in this part are registered material under the Law Concerning the Examination and Regulation of Manufacture,etc.of Chemical Substance. Note: