1010 Thin Film Chip Resistor
Standard Grade, Wraparound
02/08/0802/08/08
PERFORMANCE CHARACTERISTICSPERFORMANCE CHARACTERISTICS
MECHANICAL
Length
Width
Thickness
Top Term
Bottom Term
Gap
Approx. Weight
Length
Width
Thickness
Top Term
Bottom Term
Gap
Approx. Weight
.104 (.102 - .110)
.098 (.096 - .104)
.017 (.013 - .023)
.015 (.010 - .020)
.014 (.010 - .020)
.076 (.072 - .080)
0.01005 grams
.104 (.102 -.110)
.098 (.096 -.104)
.017 (.013 -.023)
.015 (.010 -.020)
.014 (.010 -.020)
.076 (.072 -.080)
0.01005 grams
2.65 (2.60 - 2.80)
2.50 (2.45 - 2.65)
0.38 (0.33 - 0.58)
0.38 (0.25 - 0.50)
0.36 (0.25 - 0.51)
1.91 (1.81 - 2.01)
2.65 (2.60 -2.80)
2.50 (2.45 -2.65)
0.38 (0.33 -0.58)
0.38 (0.25 -0.50)
0.36 (0.25 -0.51)
1.91 (1.81 -2.01)
PART NUMBERING
MINIMUM
RECOMMENDED
MOUNTING
PADS
(INCHES)
MINIMUM
RECOMMENDED
MOUNTING
PADS
(INCHES)
.134
.104
.070
INCHES MILLIMETERSINCHES MILLIMETERS
.032
“Specifications subject to change without notice.”“Specifications subject to change without notice.”
(1) Minimum resistance range at 0.1% tolerance is 100ohms.
(2) +/- 0.05% limited availability - consult factory
(1) Minimum resistance range at 0.1% tolerance is 100ohms.
(2) +/- 0.05% limited availability - consult factory
Resistance Range(1)
Tolerances (2)
TCR
Thermal Resistance
Maximum Power
Maximum Voltage
Resistance Range(1)
Tolerances (2)
TCR
Thermal Resistance
Maximum Power
Maximum Voltage
5.6W- 1.6MW
0.1%, 0.25%, 0.5%,1%, 2%, 5%
35°C/W
500 mW
75 Volts
±25, ±50, ±100 ppm
5.6W- 1.6MW
0.1%, 0.25%, 0.5%,1%, 2%, 5%
35°C/W
500 mW
75 Volts
±25, ±50, ±100 ppm
ENVIRONMENTAL PERFORMANCE (3)ENVIRONMENTAL PERFORMANCE (3)
±0.02%
±0.02%
±0.02%
±0.02%
±0.03%
±0.03%
See Chart
±0.02%
±0.02%
±0.02%
±0.02%
±0.03%
±0.03%
See Chart
Thermal Shock
Low Temperature Operation
Short-time Overload
Resistance to Bonding Exposure
Moisture Resistance
High Temperature Exposure
Life Test
Thermal Shock
Low Temperature Operation
Short-time Overload
Resistance to Bonding Exposure
Moisture Resistance
High Temperature Exposure
Life Test
(3)Typical resistance change, test methods and criteria
per MIL-PRF-55342.
(3)Typical resistance change, test methods and criteria
per MIL-PRF-55342.
SIZE CODESIZE CODE
TOLERANCE: B: 01% C: 0.25% D: 0.5% F: 1% G: 2% J: 5%TOLERANCE: B: 01% C: 0.25% D: 0.5% F: 1% G: 2% J: 5%
PRODUCT DESIGNATION: A: Thin film on aluminaPRODUCT DESIGNATION: A: Thin film on alumina
S 1010 C A 1001FHB-TRS1010 C A 1001 F H B - TR
TERMINATION FINISH: B: Sn60 over nickel barrier W: GoldTERMINATION FINISH: B: Sn60 over nickel barrier W: Gold
PACKAGING CODE: - TR = Tape/Reel - W = Waffle Carrier (Default packaging is Bulk)PACKAGING CODE: -TR= Tape/Reel - W = Waffle Carrier (Default packaging is Bulk)
TEMPERATURE CHARACTERISTIC TCR: E: ±25 ppm H: ±50 ppm K: ±100 ppmTEMPERATURE CHARACTERISTIC TCR: E: ±25 ppm H: ±50 ppm K: ±100 ppm
RESISTANCE VALUE:
Three or Four digits are used, with all leading digits significant. Four digits are used for 1% tolerance or lower; otherwise, three digits are
used. The last digit specifies the number of zeros to add. The letter "R" is used to represent the decimal for fractional ohmic values.
Example: 5R6 is 5.6 ohms.
RESISTANCE VALUE:
Three or Four digits are used, with all leading digits significant. Four digits are used for 1% tolerance or lower; otherwise, three digits are
used. The last digit specifies the number of zeros to add. The letter "R" is used to represent the decimal for fractional ohmic values.
Example: 5R6 is 5.6 ohms.
GRADE: S: Standard Production H: High Reliability (For Screening options, contact the factory)GRADE: S: Standard Production H: High Reliability (For Screening options, contact the factory)
TERMINATION TYPE: C: Wraparound terminationTERMINATION TYPE: C: Wraparound termination
PROTECTIVE
ENCAPSULANT
PROTECTIVE
ENCAPSULANT
WRAPAROUND
TERMINATIONS
WRAPAROUND
TERMINATIONS 99.6% ALUMINA99.6% ALUMINA
PRECISION
THIN FILM
PRECISION
THIN FILM
STATE OF THE ART, INC.STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-17972470 Fox Hill Road, State College, PA 16803-1797
Phone (814) 355-8004 Fax (814) 355-2714Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-3401Toll Free 1-800-458-3401
www.resistor.com
POWER DERATING
CURRENT NOISE
TYPICAL LIFE TEST PERFORMANCE
POWER DISSIPATION
TEMPERATURERISE(°C)
POWER DISSIPATION (WATTS)
fiber epoxy board
ceramic board
