PTVA030121EA Thermally-Enhanced High Power RF LDMOS FET 12 W, 50 V, 390 - 450 MHz Description The PTVA030121EA is an LDMOS FET characterized for use in power amplifier applications in the 390 MHz to 450 MHz frequency band. Features include high gain and a thermally-enhanced package. Manufactured with Infineon's advanced LDMOS process, this device provides excellent thermal performance and superior reliability. PTVA030121EA Package H-36265-2 Features CW Power Sweep 28 90 26 80 Gain 24 70 22 60 20 50 18 40 16 14 30 Efficiency 31 33 35 37 39 41 3-1 43 Drain Effficiency (%) Gain (dB) VDD = 50 V, IDQ = 30 mA, = 450 MHz * Unmatched input and output * Integrated ESD protection * High gain, low thermal resistance * Excellent ruggedness * Capable of withstanding a 13:1 load mismatch at 50 V, 12 W, CW conditions * Pb-free and RoHS compliant 20 Output Power (dBm) RF Characteristics CW Measurements VDD = 50 V, IDQ = 50 mA, POUT = 12 W, = 450 MHz Characteristic Symbol Min Typ Max Unit Gain Gps 23 25 -- dB Drain Efficiency hD 66 69 -- % All published data at TCASE = 25C unless otherwise indicated ESD: Electrostatic discharge sensitive device--observe handling precautions! Data Sheet 1 of 10 Rev. 05, 2013-07-02 PTVA030121EA Confidential, Limited Internal Distribution DC Characteristics Characteristic Conditions Symbol Min Typ Max Unit Drain-Source Breakdown Voltage VGS = 0 V, IDS = 1 mA V(BR)DSS 105 -- -- V Drain Leakage Current VDS = 50 V, VGS = 0 V IDSS -- -- 1.0 A VDS = 105 V, VGS = 0 V IDSS -- -- 10.0 A On-State Resistance VGS = 10 V, VDS = 0.1 V RDS(on) -- 2.8 -- W Operating Gate Voltage VDS = 50 V, IDQ = 50 mA VGS -- 3.6 -- V Gate Leakage Current VGS = 10 V, VDS = 0 V IGSS -- -- 1.0 A Maximum Ratings Parameter Symbol Value Unit Drain-Source Voltage VDSS 105 V Gate-Source Voltage VGS -6 to +12 V Junction Temperature TJ 200 C Storage Temperature Range TSTG -65 to +150 C Thermal Resistance (TCASE 70C, 12 W CW) RqJC 6.5 C/W Ordering Information Type and Version Order Code Package and Description Shipping PTVA030121EA V1 PTVA030121EAV1XWSA1 H-36265-2, bolt-down Tray PTVA030121EA V1 R250 PTVA030121EAV1R250XTMA1 H-36265-2, bolt-down Tape & Reel, 250pcs Data Sheet 2 of 10 Rev. 05, 2013-07-02 PTVA030121EA Confidential, Limited Internal Distribution Typical Performance (data taken in a production test circuit) CW Performance CW Power Sweep VDD = 50 V, IDQ = 30 mA 30 Gain 22 50 40 18 14 30 Efficiency 31 33 35 37 39 41 43 60 50 18 40 14 30 Efficiency 30 32 34 36 38 40 42 a030121 3.3 44 20 Output Power (W) CW Performance, Efficiency CW Performance, Gain VDD = 50 V, = 450 MHz, series show IDQ VDD = 50 V, = 450 MHz, series show IDQ 30 80 Efficie ency (%) 30 mA 22 IDQ = 0.5 mA 18 IDQ = 60 mA IDQ = 30 mA IDQ = 0.5 mA 70 60 mA 26 Ga ain (dB) 70 22 Output Power (dBm) 14 80 Gain 26 10 20 VDD = 50 V VDD = 40 V VDD = 30 V Drain Efficiency (%) 70 60 26 10 34 Gain (dB) 30 80 Drain Effficiency (%) 450 MHz 420 MHz 390 MHz 34 Gain (dB) IDQ = 30 mA, = 450 MHz, series show VDD 60 50 40 30 32 34 36 38 40 20 42 Output Power (dBm) Data Sheet 32 34 36 38 40 42 Output Power (dBm) 3 of 10 Rev. 05, 2013-07-02 PTVA030121EA Confidential, Limited Internal Distribution Broadband Circuit Impedance Z Source Frequency MHz R Z Load jX R jX 390 22.20 34.88 4.26 15.04 405 21.95 34.74 4.46 15.82 420 21.39 34.99 4.66 16.62 435 20.61 35.80 4.88 17.42 450 19.77 37.03 5.11 18.23 Reference Circuit R808 2000 Ohm S2 8 4 R802 6200 Ohm In NC 2 Out NC 3 6 1 C802 1000 pF 7 5 R804 2000 Ohm R801 1200 Ohm R807 1200 Ohm S1 2 C 4 S B 3 E TL115 R102 1000 Ohm TL116 TL111 TL113 TL114 R805 2000 Ohm TL101 r=3.48 H=30 mil RO/RO4350 B1 RF_IN PORT 1 1 TL103 TL112 TL106 BD - v 1 _ TL107 TL102 3 2 3 R101 2.2 Ohm 1 e a C101 300 pF 2 0 1 2 TL104 a 0 3 TL105 - i n _ 1 0 - 1 3 - 2 0 1 1 R806 1300 Ohm R803 10 Ohm 3 S3 1 C801 1000 pF PORT 3 1 TL109 TL108 TL110 PORT GATE DUT 2 L1 "5nH_D" Reference circuit input schematic for = 450 MHz Data Sheet 4 of 10 Rev. 05, 2013-07-02 PTVA030121EA Confidential, Limited Internal Distribution Reference Circuit (cont.) C204 1000000 pF C205 300 pF TL239 2 TL241 C203 10000000 pF 3 TL238 3 2 TL234 3 1 2 TL240 TL237 TL236 TL235 PORT 3 1 1 L3 "43nH_M" TL215 TL224 TL222 TL204 TL203 TL223 TL233 TL242 DRAINPORT DUT 1 TL216 TL213 TL214 TL206 TL207 TL210 L1 8 nH TL211 2 TL212 3 C202 300 pF TL209 TL225 TL208 2 1 TL205 1 3 TL202 L2 8 nH TL201 TL230 TL227 C201 9.1 pF a 0 3 0 1 2 1 TL218 e a - v 1 _ B D- o u t _ 1 0 - 1 3 - 2 0 1 1 TL228 PORT RF_OUT 2 2 3 TL226 1 TL217 r=3.48 TL232 H=30 mil RO/RO4350B1 TL229 TL231 TL221 TL219 TL220 Reference circuit output schematic for = 450 MHz Reference Circuit Assembly DUT PTFA030121EA Test Fixture Part No. LTN/PTFA030121EA PCB Rogers RO4350, 0.508 mm [0.020"] thick, 1 oz. copper, r = 3.48 Find Gerber files for this test fixture on the Infineon Web site at (http://www.infineon.com/rfpower) Electrical Characteristics at 450 MHz Transmission Electrical Line Characteristics Dimensions: mm Dimensions: mils Input TL101 0.009 l, 92.76 W W = 0.51, L = 3.81 W = 20, L = 150 TL102 0.001 l, 45.29 W W1 = 2.03, W2 = 2.03, W3 = 0.51 W1 = 80, W2 = 80, W3 = 20 TL103 0.001 l, 52.21 W W = 1.63, L = 0.43 W = 64, L = 17 TL105 0.025 l, 52.21 W W = 1.63, L = 10.13 W = 64, L = 39 TL106, TL109 0.003 l, 45.29 W W = 2.03, L = 1.27 W = 80, L = 50 TL107 0.002 l, 45.29 W W = 2.03, L = 0.76 W = 80, L = 30 TL110 0.013 l, 16.51 W W = 7.62, L = 5.08 W = 300, L = 200 TL113 0.002 l, 92.76 W W = 0.51, L = 1.02 W = 20, L = 40 TL115 0.013 l, 54.31 W W = 1.52, L = 5.08 W = 60, L = 200 TL116 0.003 l, 54.31 W W = 1.52, L = 1.02 W = 60, L = 40 table continued next page Data Sheet 5 of 10 Rev. 05, 2013-07-02 PTVA030121EA Confidential, Limited Internal Distribution Reference Circuit (cont.) Electrical Characteristics at 450 MHz Transmission Electrical Line Characteristics Dimensions: mm Dimensions: mils Output TL201, TL202 0.005 l, 45.29 W W = 2.03, L = 2.04 W = 80, L = 81 TL203 0.006 l, 38.92 W W = 2.54, L = 2.54 W = 100, L = 100 TL206, TL207 0.029 l, 38.92 W W = 2.54, L = 11.43 W = 100, L = 450 TL209 0.009 l, 38.92 W W = 2.54, L = 3.56 W = 100, L = 140 TL210 0.018 l, 78.46 W W = 0.76, L = 7.62 W = 30, L = 300 TL211 0.002 l, 25.11 W W1 = 4.57, W2 = 4.57, W3 = 0.76 W1 = 180, W2 = 180, W3 = 30 TL212 0.003 l, 25.11 W W = 4.57, L = 1.27 W = 180, L = 50 TL214 0.004 l, 25.11 W W = 4.57, L = 1.52 W = 180, L = 60 TL215 0.010 l, 23.09 W W = 5.08, L = 3.81 W = 200, L = 150 TL216 0.013 l, 16.51 W W = 7.62, L = 5.08 W = 300, L = 200 TL217 0.018 l, 52.21 W W = 1.63, L = 7.29 W = 64, L = 287 TL219 0.006 l, 52.21 W W = 1.63, L = 2.41 W = 64, L = 95 TL222 0.006 l, 38.92 W W = 2.54, L = 2.54 W = 100, L = 100 TL226 0.018 l, 52.21 W W = 1.63, L = 7.34 W = 64, L = 289 TL227 0.002 l, 52.21 W W = 1.63, L = 0.84 W = 64, L = 33 TL228 0.006 l, 52.21 W W = 1.63, L = 2.30 W = 64, L = 91 TL229 0.006 l, 52.21 W W = 1.63, L = 2.41 W = 64, L = 95 TL234 0.005 l, 27.14 W W = 4.14, L = 2.12 W = 163, L = 84 TL235 0.014 l, 34.38 W W = 3.02, L = 5.51 W = 119, L = 2 17 TL240 0.026 l, 61.53 W W = 1.23, L = 10.63 W = 48, L = 419 TL241 0.010 l, 38.92 W W1 = 2.54, W2 2.54, W3 = 4.14 W1 = 100, W2 = 100, W3 = 163 Data Sheet 6 of 10 Rev. 05, 2013-07-02 PTVA030121EA Confidential, Limited Internal Distribution Reference Circuit (cont.) RO4350, .030 (60) RO4350, .030 C205 C204 R804 R808 (61) C203 C801 R802 R807 R806 VDD C802 S1 R803 R805 L3 S3 S2 R801 R102 PTVA 030121EA RF_IN L1 C101 R101 RF_OUT C201 L1 C202 L2 PTVA030121_OUT_01 PTVA030121_IN_01 a030121 ea- v1_ C D 10 - 13 - 2011 Reference circuit assembly diagram (not to scale) Component ID Description Suggested Supplier P/N C101 Chip capacitor, 300 pF ATC ATC100B301JW200XB C801, C802 Capacitor, 1000 pF Panasonic Electronic Components ECJ-1VB1H102K L1 Inductor, 5 nH Coilcraft A02TGLB R101 Resistor, 2.2 W Panasonic Electronic Components ERJ-8GEYJ2R2V R102 Resistor, 1000 W Panasonic Electronic Components ERJ-8GEYJ102V R801, R807 Resistor, 1200 W Panasonic Electronic Components ERJ-3GEYJ122V R802 Resistor, 6200 W Panasonic Electronic Components ERJ-8GEYJ622V R803 Resistor, 10 W Panasonic Electronic Components ERJ-8GEYJ100V R804, R805, R808 Resistor, 2000 W Panasonic Electronic Components ERJ-8GEYJ202V R806 Resistor, 1300 W Panasonic Electronic Components ERJ-3GEYJ132V S1 Transistor Infineon Technologies BCP56 S2 Voltage regulator Fairchild Semiconductor LM7805CT S3 Potentiometer, 2K W Bourns Inc. 3224W-1-202E Input table continued next page Data Sheet 7 of 10 Rev. 05, 2013-07-02 PTVA030121EA Confidential, Limited Internal Distribution Reference Circuit (cont.) Component ID Description Suggested Supplier P/N C201 Chip capacitor, 9.1 pF ATC ATC100B9R1BW500XB C202 Chip capacitor, 300 pF ATC ATC100B301JW200XB C203 Chip capacitor, 10 F TDK Corporation C5750X7S2A106M230KB C204 Capacitor, 1 F TDK Corporation C4532X7R2A105K230KA C205 Chip capacitor, 300 pF ATC ATC100B301JW200XB L1, L2 Inductor, 8 nH Coilcraft A03TGLB L3 Inductor, 43 nH Coilcraft B10TGLB Output See next page for package mechanical specifications Data Sheet 8 of 10 Rev. 05, 2013-07-02 PTVA030121EA Confidential, Limited Internal Distribution Package Outline Specifications Package H-36265-2 45 X 2.03 [.080] 6. ALL FOUR CORNERS 2X 7.11 [.280] 2.66.51 [.105.020] D S FLANGE 9.78 [.385] 3.05 [.120] LID 10.16.25 [.400.010] C L G 2X R1.52 [R.060] C L 4X R0.63 [R.025] MAX SPH 1.57 [.062] 15.49.51 [.610.020] 4X R1.52 [R.060] 15.23 [.600] 10.16.25 [.400.010] 3.61.38 [.142.015] h - 3 6 2 6 5 - 2 _ p o _ 0 9 - 0 8 - 2 0 1 1 1.02 [.040] 20.31 [.800] 6. Diagram Notes--unless otherwise specified: Diagram Notes--unless otherwise specified: 1. Interpret dimensions and tolerances per ASME Y14.5M-1994. 1. Interpret dimensions and tolerances per ASME Y14.5M-1994. 2. Primary dimensions are mm. Alternate dimensions are inches. 2. Primary dimensions are mm. Alternate dimensions are inches. 3. All tolerances 0.127 [.005] unless specified otherwise. 3. All tolerances 0.127 [0.005] unless specified otherwise. 4. Pins: D - drain, G - gate, S - source. 4. Pins: D - drain; G - gate; S - source 5. Lead thickness: 0.10 +0.051/-0.025 [.004 +.002/-.001]. 5. Lead thickness: 0.10 + 0.051/-0.025 mm [0.004 + 0.002/-0.001 inch]. 6. Exposed metal plane on top and bottom of ceramic insulator. 6. Exposed metal plane on top and bottom of ceramic insulator. 7. Gold plating thickness: 1.14 0.38 micron [45 15 microinch]. 7. Gold plating thickness: 1.14 0.38 micron [45 15 microinch]. (Find the latest and most complete information about products and packaging at the Infineon Internet page (highpowerRF@infineon.com) Data Sheet 9 of 10 Rev. 05, 2013-07-02 PTVA030121EA V1 Revision History: Previous Version: Page 2 7, 8 2013-07-02 2011-11-10, Data Sheet Subjects (major changes since last revision) Update DC Characteristics and Maximum Ratings table; add Order Codes. Add manufacturer. Data Sheet We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal (including a reference to this document) to: (highpowerRF@infineon.com) To request other information, contact us at: +1 877 465 3667 (1-877-GO-LDMOS) USA or +1 408 776 0600 International Edition 2013-07-02 Published by Infineon Technologies AG 85579 Neubiberg, Germany (c) 2010 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com/rfpower). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Data Sheet 10 of 10 Rev. 05, 2013-07-02 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Infineon: PTVA030121EAV1XWSA1 PTVA030121EAV1R250XTMA1