NON-CATALOG Drop-In Monolithic Amplifier 50 MAR-7+ DC to 2000 MHz Features * wideband, DC to 2000 MHz * high gain, up to 32.5 dB @ 100 MHz * low noise * MAR-7+ is equivalent to MSA-0785 * cascadable * protected by US Patent, 6,943,629 (except MAR-6+) CASE STYLE: VV105 + RoHS compliant in accordance with EU Directive (2002/95/EC) The +Suffix has been added in order to identify RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications. Applications * cellular * PCN instrumentation Electrical Specifications * MODEL NO. MAR-7+ FREQ.2 (MHz) GAIN (dB) Typical at MHz MAXIMUM POWER (dBm) fL fU 100 1000 2000 Note 1 Min. DC 2000 13.5 12.5 11.0 8.5 DYNAMIC RANGE VSWR (:1) Typ. Output (1 dB Compr.) Typ. Input (no damage) NF (dB) Typ. IP3 (dBm) Typ. In +7.0 +13 5.0 +19.0 1.7 ABSOLUTE MAXIMUM RATING6 (25C) DC OPERATING POWER7 at Pin 3 THERMAL RESISTANCE5 Out I (mA) P (mW) Current (mA) Device Volt Typ. C/W 1.7 60 275 22 4.0 120 * Test data based on models tested with bent leads per case style WW107 MTTF vs. Junction Temp. NOTES: 1. Minimum gain over the full frequency range and temperature range. 2. Low frequency cutoff determined by external coupling capacitors. 5. Thermal resistance jc is from hottest junction in device to mounting surface of leads. 6. Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation. 7. Supply voltage must be connected to pin 3 through a bias resistor in order to prevent damage. See "Biasing MMIC Am plifiers" in minicircuits.com/application.html. Reliability predictions are applicable at specified current & normal operating conditions. 1,000,000 MTTF (Years) 100,000 10,000 1,000 100 10 Maximum Ratings Operating Temperature Storage Temperature 1 -40C to 85C 0 80 -55C to 100C 90 100 110 120 130 140 150 160 170 180 190 200 210 Junction Temperature ( C) Pin Connections RF IN 1 RF OUT 3 DC 3 GROUND 2,4 Model Identification Model No. MAR-7+ Marking 07 Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site TM Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. REV. OR M107249 MAR-7+ 100222 Page 1 of 2 MAR-7+ Outline Drawing Typical Biasing Configuration R bias (R equired) V cc C bypas s 4 C block IN Ibias R F C (Optional) 3 Vd 1 2 OUT C block Resistor Values ("1%" Res.) Vcc MAR-7+ 7 137 8 182 9 226 10 274 11 316 12 365 13 412 14 456 15 499 Outline Dimensions ( inch mm ) A .085 2.16 B .060 1.52 C .008 0.20 D .020 0.51 E .250 6.35 F .012 0.30 G .025 0.64 wt grams .015 Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site TM Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. Page 2 of 2