SINGLE AND MULTIPLE OUTPUT LINEAR POWER SUPPLIES File No. E140527 SPECIFICATIONS AC INPUT User-selectable for 100/120/220/230-240 VAC, 47-63 Hz. Factory set at 120 VAC. Tolerances are: +10% and -13% for 100, 120, 220 and 240 VAC input; + 15% and -10% for 230 VAC input. Derate output current 10% for 50 Hz operation. Input must be fused. See fuse rating and jumper information table LOAD REGULATION 0.05% for a 50% load change. 1.0% for models OLD12B and OLD-15B. AC INPUT FUSE RATINGS TRANSIENT RESPONSE Case Size B OLS-24B C N D 131 AA OLD-24AA OLT-522AA BB CC 100 VAC 0.63A 1.0A 1.6A 2.0A 2.5A 3.0A 0.63A 1.0A 1.0A 1.6A 2.5A 120 VAC 0.5A 0.8A 1.0A 2.0A 2.0A 3.0A 0.5A 0.8A 0.8A 1.0A 2.0A 220 VAC 0.35A 0.5A 0.8A 1.0A 1.25A 1.6A 0.35A 0.5A 0.5A 0.8A 1.25A SHORT CIRCUIT & OVERLOAD PROTECTION Automatic current limit/foldback. Output recovers upon removal of fault condition. OVERVOLTAGE PROTECTION Built-in on all main 5V outputs. Factory set at 6.2V 0.4V. Other outputs use optional overvoltage protection module, OVP-1. OPTIONAL OVERVOLTAGE PROTECTION OVP module, model OVP-1, may be used with any output not supplied with factory built-in OVP . Adjustable range, 6.4 to 34V . Maximum current rating 8.0A. Module may be used to protect dual outputs (12 or 15). Recommended trip point is 1 15 to 133% of output voltage. 120 VAC 2& 4 1& 3 2& 4 1& 3 2& 3 2& 3 1& 5 4& 1 1& 5 4& 1 Jumper Apply AC (47 to 63 Hz) 220 230/240 VAC VAC 100 VAC 100V 120V 42315 220V 230/240V 42315 STABILITY 0.3% for 24-hour period after 1-hour warm-up. MTBF Per MIL-HDBK-217D at 100% load, 120 VAC line and 25uC ambient temperature. CASE SIZE MTBF RATINGS Case # Outputs MTBF hrs B 1 300,000 B 2 460,000 C 1 300,000 N 1 260,000 N 2 150,000 D 1 250,000 D 3 120,000 AA 2 175,000 AA 3 140,000 BB 2 160,000 CC 2 155,000 131 3 120,000 TEMPERATURE RATINGS Operating: 0uC to +50uC full-rated load. Derate to 40% at 70uC. Storage: -40uC to +85uC. TEMPERATURE COEFFICIENT 0.03%/0C maximum. OVP-1 Outline 42315 - nal output voltage. AC INPUT JUMPER INFORMATION AC Input For use at LINE REGULATION 0.05% for a 10% line change. 1.0% for models OLD12B and OLD-15B. 240 VAC 0.25A 0.35A 0.5A 1.0A 1.0A 1.6A 0.25A 0.35A 0.35A 0.5A 1.0A File No.s 3206,3208, 3210, 3216, 3218, 3257, 3212, 3214,3257, 3259, 3261 File No. LR69809 42315 4 2 3 1 5 EFFICIENCY Typical effic iency: 5V output, 45%; 12 and 15V output, 55%; 24V to 250V outputs:60%. VIBRATION Per MIL-STD-810C, Method 514, Procedure X CA SHOCK Per MIL-STD-810C, Method 516, Procedure DC OUTPUT See power output ratings for specific models. Adjustable range 5% minimum. See voltage adjust specifications. VOLTAGE ADJUST Adjustable range 5% minimum on fixed output models. Voltage adjustable over range indicated (5%) for wide range models. Voltage non-adjustable on models OLD122B and OLD-15B. Models OLD-24AA, OLD-24BB and OLD-24CC are factory set at 24V. Adding jumper allows 18 to 20V adjustable output. NOISE AND RIPPLE 5V through 15V models: 5.0 mV p-p max. OLD-12B and OLD-15B: 0.2% of output voltage p-p max. 24V models: 3 mV p-p plus 0.2% of output voltage max. REMOTE SENSING Provided on most outputs. Open sense lead protection built-in. Exceptions are noted with an "*". See output power rating table for specific model. EMI/RFI Inherently low conducted and radiated noise levels. Y (C ) (+18~20 )(+24) (C ) (-18~20) (-24) A AT A B BT B Fig. 1 Models OLD-24AA, 24BB, 24CC CHG T AP & OPEN J1, J2 & J3. SHOR T J3 FOR -5V . ( 12) ( 12) ( 15) ( 15) A AT A B BT B Fig. 2 Models OLD-12/15AA, 12/15BB V. DIMENSIONS AND WEIGHT See dimensional drawings. SAFETY Compliance to intOl safety regulations for power supply specs. UL recognized, file #E102103. CSA certfied, cert. #LR69809. VDE registered: OLS-B, file #3212; OLS-C, #3208; OLS-N, #3210; OLS-D, #3214; OLD-B, #3218; OL T- F, #3206; OLD-24AA & 24BB, #3216; OLD-5AA, 512AA, 12/15AA & OL T-522A, #3257; OLD5BB, 12/15BB & 512BB, #3259; OLD-5CC, 24CC, 12/15CC & 512CC, #3261. Original Connection Move To Change Output V oltage OUTPUT TAP AND PCB VOLTAGE CHANGES SHOR T J1 & J2 FOR ALL. TAP CHG ON OLD-24CC ONL T. G-1. CHG T AP & OPEN J1 & J2. (C) (+12) (+15) (C) (-12) (-15) A AT A B BT B Fig. 3 Models OLD-12/15CC For more detailed information and individual product specification sheets visit OL T-522AA: SHORT J1 FOR -5V . OL T-522F: TA P CHG & OPEN J1. J2 & J3 SHORT J3 FOR -5V . (+12) (C) (-12) (+15) (-15) A AT A B BT B C C Fig.4 Models OL T-522AA, 522F www.tamuracorp.com. Tamura Corporation of America P.O. Box 892230 Temecula, CA 92589-2230 Tel: 951-699-1270 FAX: 951-676-9482 sales@tamuracorp.com www.tamuracorp.com 20| Standard Products Catalog SINGLE AND MULTIPLE OUTPUT LINEAR POWER SUPPLIES Tamura has set reliability standards through component upgrade design. Critical specs such as temperature, voltage and current have been derated so that, for example, 105AC instead of 85AC electrolytic caps are used. The result is the highest available MTBF as calculated by MIL-HDBK-217D at full load, 120VAC and 25AC. File No. E140527 File No.s 3206,3208, 3210, 3216, 3218, 3257, 3212, 3214,3257, 3259, 3261 File No. LR69809 UL544 for MEDICAL & DENTAL DUAL OUTPUT MODELS MODEL N O.1 POWER-ONE TYPE V O LTA G E , C U R R E N T 2,3 OUTPUT 1 OUTPUT 2 HAA5-1.5/OVP-A HBB5-3/OVP-A HCC5-6/OVP-A 5V,1.5A* 5V,3.0A* 5V,6.0A -5V,1.5A* -5V,3.0A* -5V,6.0A AA BB CC 12V, 0.4A* 15V, 0.4A* -12V ,0.4A* -15V ,0.4A* B B 12V, 1.0A jumper chg: 15V,0.8A -12V ,1.0A AA -15V ,0.8A or -5V, 0.4A -12V , 1.7A BB -15V , 1.5A or -5V, 0.7A -12V , 3.4A CC CASE SIZE 5 V O LT S OLD-5AA V OLD-5BBV OLD-5CCV 12 o r 15 VO LT S OLD-12B HAD12-0.4-A OLD-15B HAD15-0.4-A 12/15 VOLT S OLD-12/15AA HAA15-0.8-A OLD-12/15BB OLD-12/15CC HBB15-1.5-A HCC15-3-A 24 o r 18 to 20 VO LT S OLD-24AA HAA24-0.6-A OLD-24BB HBB24-1.2-A OLD-24CC HCC24-2.4-A 5 & 12 to 15 VO LT S OLD-512AA HAA512-A OLD-512BB HBB512-A OLD-512CC HCC512-A 12V, 1.7A jumper chg: 15V, 1.5A 12V, 3.4A jumper chg: 15V, 3.0A 24V, 0.6A* jumper chg: 1820V , 0.4A 24V,1.2A* jumper chg: 1820,0.9A 24V,2.4A jumper chg: 1820V ,1.8A 5V,2.0A* 5V,3.0A 5V,6.0A -15V , 3.0A -24V ,0.6A* AA -1820V , 0.4A -24V ,1.2A* BB -1820V ,0.9A -24V ,2.4A CC -1820V ,1.8A +1215V ,0.5A* +1215V ,1.25A +1215V ,2.5A AA BB CC TRIPLE OUTPUT MODELS V O LTAG E C U R R E N T2,3 MODEL POWER-ONE CASE NO.1 TYPE OUTPUT 1 OUTPUT 2 OUTPUT 3 S I Z E 5 & 12 TO 15 VOLT S OL T-522AA HTAA-16W -A 5V,2.0A* 1215V ,0.4A* -(1215)V ,0.4A* AA -5V,0.4A 4 jumper chg: OL T-522F CP131-A 5V,8.0A 12V, 1.7A -12V, 1.7A 131 -15V, 1.5A jumper chg: 15V, 1.5A -or5V, 0.7A Note 1: OVP built-in on main 5V output of multiple output units. Use OVP-1 module (up to 34V combined for other outputs). Note 2: Other industry standard output voltages available on a special order. Note 3: * indicates remote sense not provided . Note 4: Indicates OLT-522AA short J1 for -5V. Features MTBF to 460,000 Hrs. UL 1950, UL544, CSA 1402C, VDE 0805, EN60 950. 100/120/220/230/240V AC inputs. Remote Sensing. 2 Y ear Wa rranty. 5V OVP Built-in. Optional OVP Module. Short Circuit Protection. Overload Protection Burn-in. V oltage Adjust: 5% min. Line/Load Reg: 0.05% typ. Noise/Ripple: 5.0mVp-p typ. Tr ansient Response: 50 sec (50% load chg.) Stability: 0.3%for 24 hours. 50AC Rated Full Load. T emp coef : 0.3%/AC max. V ibration: MIL-STD-810C. Shock: MIL-STD-810C. SINGLE OUTPUT MODELS MODEL N O. POWER-ONE TYPE V O LTA G E ,2 CURRENT CASE SIZE 5 V O LT S OLS-5BV OLS-5CV OLS-5NV OLS-5DV HB5-3/OVP-A HC5-6/OVP-A HN5-9/OVP-A HD5-12/OVP-A 5V, 3.0A 5V, 6.0A 5V, 9.0A 5V, 12.0A B C N D 12 VO LT S OLS-12B OLS-12C OLS-12N OLS-12D HB12-1.7-A HC12-3.4-A HN12-5.1-A HD12-6.8-A 12V, 1.7A 12V, 3.4A 12V, 5.1A 12V, 6.8A B C N D 15 VO LT S OLS-15B OLS-15C OLS-15N OLS-15D HB15-1.5-A HC15-3-A HN15-4.5-A HD15-6-A 15V, 1.5A 15V, 3.0A 15V, 4.5A 15V, 6.0A B C N D 24 VO LT S OLS-24B OLS-24C OLS-24N OLS-24D HB24-1.2-A HC24-2.4-A HN24-3.6-A HD24-4.8-A 24V, 1.2A 24V, 2.4A 24V, 3.6A 24V, 4.8A B C N D 6.4V34V OVP OVP MODULE OVP-1 OVP-12 MECHANICAL DIMENSIONS CASE SIZE B C D N AA BB CC 131 OVP-1 DIMENSIONS (L" xW"x H") 4.87X4.00X2.07 5.62X4.87X2.95 9.00X4.87X3.28 7.00X4.87X3.20 6.50X4.00X2.07 7.00X4.78X2.95 9.38X4.87X3.28 11.0X4.87X2.75 1.58X1.58X0.50 WT (LBS) 2 4 7.5 6 2 4 7 9 For more detailed information and individual product specification sheets visit www.tamuracorp.com. Tamura Corporation of America P.O. Box 892230 Temecula, CA 92589-2230 Tel: 951-699-1270 FAX: 951-676-9482 sales@tamuracorp.com www.tamuracorp.com Standard Products Catalog |21