OLT-522F - Tamura Corporation Of America

AC INPUT

User-selectable for 100/120/220/230-240 VAC, 47-63 Hz.

Factory set at 120 VAC. Tolerances are: +10% and -13%

for 100, 120, 220 and 240 VAC input; + 15% and -10%

for 230 VAC input. Derate output current 10% for 50 Hz

operation. Input must be fused. See fuse rating and

jumper information table

DC OUTPUT

See power output ratings for specific models. Adjustable

range ±5% minimum. See voltage adjust specifications.

VOLTAGE ADJUST

Adjustable range ±5% minimum on fixed output models.

Voltage adjustable over range indicated (±5%) for wide

range models. Voltage non-adjustable on models OLD-

122B and OLD-15B. Models OLD-24AA, OLD-24BB and

OLD-24CC are factory set at 24V. Adding jumper allows

18 to 20V adjustable output.

EMI/RFI

Inherently low conducted and radiated noise levels.

For more detailed information and individual product specification sheets visit www.tamuracorp.com.

Tamura Corporation of America ¥ P.O. Box 892230 ¥ Temecula, CA 92589-2230 ¥ Tel: 951-699-1270 ¥ FAX: 951-676-9482 ¥ sales@tamuracorp.com

www.tamuracorp.com

20| Standard Products Catalog

LINE REGULATION

±0.05% for a 10% line change. ±1.0% for models OLD-

12B and OLD-15B.

LOAD REGULATION

±0.05% for a 50% load change. ±1.0% for models OLD-

12B and OLD-15B.

TRANSIENT RESPONSE

nal output voltage.

SHORT CIRCUIT & OVERLOAD PROTECTION

Automatic current limit/foldback. Output recovers upon

removal of fault condition.

OVERVOLTAGE PROTECTION

Built-in on all main 5V outputs. Factory set at 6.2V ±0.4V.

Other outputs use optional overvoltage protection module,

OVP-1.

OPTIONAL OVERVOLTAGE PROTECTION

OVP module, model OVP-1, may be used with any output

not supplied with factory built-in OVP . Adjustable range, 6.4

to 34V . Maximum current rating 8.0A. Module may be used

to protect dual outputs (±12 or ±15). Recommended trip

point is 1 15 to 133%

of output voltage.

NOISE AND RIPPLE

5V through 15V models: 5.0 mV p-p max. OLD-12B and

OLD-15B: 0.2% of output voltage p-p max. 24V models: 3

mV p-p plus 0.2% of output voltage max.

REMOTE SENSING

Provided on most outputs. Open sense lead protection

built-in. Exceptions are noted with an “*”. See output power

rating table for specific model.

SPECIFICATIONS

AC Input (47 to 63 Hz)

For use at 100 120 220 230/240

VAC VAC VAC VAC

Jumper 1 & 3 1 & 3

2 & 4 2 & 4 2 & 3 2 & 3

Apply AC 1 & 5 4 & 1 1 & 5 4 & 1

Case 100 120 220 240

Size VAC VAC VAC VAC

B 0.63A 0.5A 0.35A 0.25A

OLS-24B 1.0A 0.8A 0.5A 0.35A

C 1.6A 1.0A 0.8A 0.5A

N 2.0A 2.0A 1.0A 1.0A

D 2.5A 2.0A 1.25A 1.0A

131 3.0A 3.0A 1.6A 1.6A

AA 0.63A 0.5A 0.35A 0.25A

OLD-24AA 1.0A 0.8A 0.5A 0.35A

OLT-522AA 1.0A 0.8A 0.5A 0.35A

BB 1.6A 1.0A 0.8A 0.5A

CC 2.5A 2.0A 1.25A 1.0A

OUTPUT TAP AND PCB VOLTAGE CHANGES

Fig. 1 Models OLD-24AA, 24BB, 24CC

(C ) (+18~20 )(+24) (C ) (-18~20) (-24)

A AT A B BT B

SHOR T J1 & J2 FOR ALL.

TAP CHG ON OLD-24CC ONL Y

Fig. 2 Models OLD-12/15AA, 12/15BB Fig. 3 Models OLD-12/15CC Fig.4 Models OL T-522AA, 522F

(+12) (C) (-12) (+15) (-15)

A AT A B BT B C C

OL T-522AA: SHORT J1 FOR -5V . OL T-522F: TA P

CHG & OPEN J1. J2 & J3 SHORT J3 FOR -5V .

STABILITY

±0.3% for 24-hour period after 1-hour warm-up.

MTBF

Per MIL-HDBK-217D at 100% load, 120 VAC line and

25ûC ambient temperature.

TEMPERATURE RATINGS

Operating: 0ûC to +50ûC full-rated load.

Derate to 40% at 70ûC.

Storage: -40ûC to +85ûC.

TEMPERATURE COEFFICIENT

±0.03%/0C maximum.

EFFICIENCY

Typical effic iency: 5V output, 45%; 12 and 15V output,

55%; 24V to 250V outputs:60%.

VIBRATION

Per MIL-STD-810C, Method 514, Procedure X CA T. G-1.

SHOCK

Per MIL-STD-810C, Method 516, Procedure V.

DIMENSIONS AND WEIGHT

See dimensional drawings.

SAFETY

Compliance to intÕl

safety regulations for power supply

specs. UL recognized, file #E102103. CSA certfied,

cert. #LR69809. VDE registered: OLS-B, file #3212;

OLS-C, #3208; OLS-N, #3210; OLS-D, #3214; OLD-B,

#3218; OL T- F, #3206; OLD-24AA & 24BB, #3216;

OLD-5AA, 512AA, 12/15AA & OLT-522A, #3257; OLD-

5BB, 12/15BB & 512BB, #3259; OLD-5CC, 24CC,

12/15CC & 512CC, #3261.

OVP-1 Outline

(± 12) (± 12) (± 15) (± 15)

A AT A B BT B

CHG T AP & OPEN J1 & J2.

CHG T AP & OPEN J1, J2 & J3.

SHOR T J3 FOR -5V .

4 2 3 1 5

42315 42315 42315 42315

100V 120V 220V 230/240V

¥¥¥¥¥ ¥¥¥¥¥ ¥¥¥¥¥ ¥¥¥¥¥

SINGLE AND MULTIPLE OUTPUT

LINEAR POWER SUPPLIES

Case # Outputs MTBF hrs

B 1 300,000

B 2 460,000

C 1 300,000

N 1 260,000

N 2 150,000

D 1 250,000

D 3 120,000

AA 2 175,000

AA 3 140,000

BB 2 160,000

CC 2 155,000

131 3 120,000

CASE SIZE MTBF RATINGS

AC INPUT JUMPER INFORMATION

AC INPUT FUSE RATINGS

Original Connection

Move To Change Output V oltage

File No. E140527 File No. LR69809

File No.s 3206,3208, 3210,

3216, 3218, 3257, 3212,

3214,3257, 3259, 3261

For more detailed information and individual product specification sheets visit www.tamuracorp.com.

Tamura Corporation of America ¥ P.O. Box 892230 ¥ Temecula, CA 92589-2230 ¥ Tel: 951-699-1270 ¥ FAX: 951-676-9482 ¥ sales@tamuracorp.com

www.tamuracorp.com Standard Products Catalog |21

SINGLE OUTPUT MODELS

M O D E L P O W E R - O N E V O LTAGE, CURRENT2,3 C A S E

NO.1T Y P E OUTPUT 1 OUTPUT 2SIZE

Ð5 VOLT S

OLD-5AA V HAA5-1.5/OVP-A 5V,1.5A* -5V,1.5A* AA

OLD-5BBV HBB5-3/OVP-A 5V,3.0A* -5V,3.0A* BB

OLD-5CCV HCC5-6/OVP-A 5V,6.0A -5V,6.0A CC

Ð12 o r 15 VOLT S

OLD-12B HAD12-0.4-A 12V, 0.4A* -12V ,0.4A* B

OLD-15B HAD15-0.4-A 15V, 0.4A* -15V ,0.4A* B

Ð12/15 VOLT S

OLD-12/15AA HAA15-0.8-A 12V , 1.0A -12V,1.0A AA

jumper chg:

15V,0.8A -15V,0.8A

or -5V, 0.4A

OLD-12/15BB HBB15-1.5-A 12V, 1.7A -12V , 1.7A BB

jumper chg:

15V, 1.5A -15V , 1.5A

or -5V, 0.7A

OLD-12/15CC HCC15-3-A 12V, 3.4A -12V , 3.4A CC

jumper chg:

15V, 3.0A -15V , 3.0A

Ð24 o r 18 to 20 VOLT S

OLD-24AA HAA24-0.6-A 24V, 0.6A* -24V ,0.6A* AA

jumper chg:

1820V , 0.4A -1820V , 0.4A

OLD-24BB HBB24-1.2-A 24V,1.2A* -24V ,1.2A* BB

jumper chg:

1820,0.9A -1820V ,0.9A

OLD-24CC HCC24-2.4-A 24V,2.4A -24V,2.4A CC

jumper chg:

1820V ,1.8A -1820V ,1.8A

5 & 12 to 15 VOLT S

OLD-512AA HAA512-A 5V,2.0A* +1215V ,0.5A* AA

OLD-512BB HBB512-A 5V,3.0A +1215V ,1.25A BB

OLD-512CC HCC512-A 5V,6.0A +1215V ,2.5A CC

SINGLE AND MULTIPLE OUTPUT

LINEAR POWER SUPPLIES

File No. E140527 File No. LR69809

File No.s 3206,3208, 3210,

3216, 3218, 3257, 3212,

3214,3257, 3259, 3261

Tamura has set reliability standards through component upgrade design. Critical specs such as temperature,

voltage and current have been derated so that, for example, 105ÁC instead of 85ÁC electrolytic caps are used.

The result is the highest available MTBF as calculated by MIL-HDBK-217D at full load, 120VAC and 25ÁC

DUAL OUTPUT MODELS

TRIPLE OUTPUT MODELS

MOD EL P OW E R- ON E V O LTAGE CURRENT2,3

C A S E

NO.1TYPE OUTPUT 1 OUTPUT 2 OUTPUT 3 SIZE

5 & Ð12 TO 15 VOLT S

OL T-522AA HT AA-16W -A 5V,2.0A* 1215V ,0.4A* -(1215)V ,0.4A* AA

jumper chg: -5V,0.4A 4

OL T-522F CP131-A 5V,8.0A 12V, 1.7A -12V , 1.7A 131

jumper chg: 15V, 1.5A -15V, 1.5A

-or-

5V, 0.7A

Features

´ MTBF to 460,000 Hrs.

´ UL 1950, UL544, CSA 1402C,

´ VDE 0805, EN60 950.

´ 100/120/220/230/240VAC inputs.

´ Remote Sensing.

´ 2 Y ear Warranty.

´ 5V OVP Built-in.

´ Optional OVP Module.

´ Short Circuit Protection.

´ Overload Protection

´ Burn-in.

´ Voltage Adjust: Ð5% min.

´ Line/Load Reg: Ð0.05% typ.

´ Noise/Ripple: 5.0mVp-p typ.

´ Transient Response: 50 sec

(50% load chg.)

´ Stability: Ð0.3%for 24 hours.

´ 50ÁC Rated Full Load.

´ Temp coef: Ð0.3%/ÁC max.

´ V ibration: MIL-STD-810C.

´ Shock: MIL-STD-810C.

MECHANICAL DIMENSIONS

Note 1: OVP built-in on main 5V output of multiple output

units. Use OVP-1 module (up to 34V combined for

other outputs).

Note 2: Other industry standard output voltages available

on a special order.

Note 3: * indicates remote sense not provided.

Note 4: Indicates OLT-522AA short J1 for -5V.

M O D EL P O W E R - O NE V O LTA G E ,2C A S E

NO. T Y P E C U R R E N T S I Z E

5 VO LT S

OLS-5BV HB5-3/OVP-A 5V, 3.0A B

OLS-5CV HC5-6/OVP-A 5V, 6.0A C

OLS-5NV HN5-9/OVP-A 5V, 9.0A N

OLS-5DV HD5-12/OVP-A 5V, 12.0A D

12 V OLT S

OLS-12B HB12-1.7-A 12V, 1.7A B

OLS-12C HC12-3.4-A 12V, 3.4A C

OLS-12N HN12-5.1-A 12V, 5.1A N

OLS-12D HD12-6.8-A 12V, 6.8A D

15 V OLT S

OLS-15B HB15-1.5-A 15V, 1.5A B

OLS-15C HC15-3-A 15V, 3.0A C

OLS-15N HN15-4.5-A 15V, 4.5A N

OLS-15D HD15-6-A 15V, 6.0A D

24 V OLT S

OLS-24B HB24-1.2-A 24V, 1.2A B

OLS-24C HC24-2.4-A 24V, 2.4A C

OLS-24N HN24-3.6-A 24V, 3.6A N

OLS-24D HD24-4.8-A 24V, 4.8A D

OVP MODULE

OVP-1 OVP-12 6.4V34V OVP

CASE DIMENSIONS WT

SIZE (L" xW"x H") (LBS)

B 4.87X4.00X2.07 2

C 5.62X4.87X2.95 4

D 9.00X4.87X3.28 7.5

N 7.00X4.87X3.20 6

AA 6.50X4.00X2.07 2

BB 7.00X4.78X2.95 4

CC 9.38X4.87X3.28 7

131 11.0X4.87X2.75 9

OVP-1 1.58X1.58X0.50