HMC241ALP3E v00.0513 SWITCHES - MULTI-THROW - SMT GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4 GHz Typical Applications Features The HMC241ALP3E is ideal for: High Isolation: 43 dB @ 2 GHz * Base Stations & Repeaters Low Insertion Loss: 0.7 dB @ 2 GHz * WLAN, WiMAX & WiBro Single Positive Supply: Vdd = +5V * CATV / DBS Integrated 2:4 TTL Decoder * Test Equipment 16 Lead 3x3mm SMT Package: 9mm Functional Diagram General Description The HMC241ALP3E is a general purpose nonreflective SP4T switch in a low cost leadless surface mount package. Covering DC - 4 GHz, this switch offers high isolation and has a low insertion loss of 0.7 dB at 2 GHz. The switch offers a single positive bias and true TTL/CMOS compatibility. A 2:4 decoder is integrated on the switch requiring only 2 control lines and a positive bias to select each path, replacing 4 to 8 control lines normally required by GaAs SP4T switches. Electrical Specifications, TA = +25 C, For TTL Control and Vdd = +5V in a 50 Ohm System Parameter Frequency Insertion Loss DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 4.0 GHz Isolation DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 4.0 GHz Return Loss "On State" DC - 2.5 GHz DC - 4.0 GHz Return Loss RF1-4 "Off State" 0.3 - 4.0 GHz Input Power for 1dB Compression 0.3 - 4.0 GHz Input Third Order Intercept (Two-Tone Input Power = +10 dBm Each Tone) 0.3 - 4.0 GHz Switching Characteristics 0.3 - 4.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 1 Min. 40 38 35 25 23 Typ. Max. Units 0.6 0.7 0.9 1.2 0.9 1.0 1.2 1.5 dB dB dB dB 45 43 41 32 dB dB dB dB 18 12 dB dB 12 dB 29 dBm 47 dBm 30 100 ns ns Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC241ALP3E v00.0513 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4 GHz Insertion Loss Isolation -10 -1 -2 -3 -20 -30 -40 -50 -4 -60 -5 -70 0 1 2 3 4 5 6 0 1 2 FREQUENCY (GHz) +25 C +85 C 5 6 RF3 RF4 0.1 and 1 dB Input Compression Point 35 INPUT COMPRESSION POINT (dBm) 0 -5 RETURN LOSS (dB) 4 RF1 RF2 -40 C Return Loss -10 -15 -20 -25 -30 -35 0 1 2 3 4 5 6 30 25 20 15 0 FREQUENCY (GHz) RFC RF1-4 ON 1 2 3 4 5 6 FREQUENCY (GHz) 1.0dB Compression Point 0.1dB Compression Point RF1-4 OFF Bias Voltage & Current Input Third Order Intercept Point THIRD ORDER INTERCEPT POINT (dBm) 3 FREQUENCY (GHz) SWITCHES - MULTI-THROW - SMT 0 ISOLATION (dB) INSERTION LOSS (dB) 0 55 Vdd Range = +5.0 Vdc 10% 50 45 Vdd (Vdc) Idd (Typ.) (mA) Idd (Max.) (mA) +5.0 2.5 5.0 TTL/CMOS Control Voltages 40 State Bias Condition Low 0 to +0.8 Vdc @ 0.2A Typ. 35 High +2.0 to +5.0 Vdc @ 40 A Typ. 0 1 2 3 4 FREQUENCY (GHz) 5 6 NOTE: DC Blocking capacitors are required at ports RFC and RF1, 2, 3, 4. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC241ALP3E v00.0513 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4 GHz SWITCHES - MULTI-THROW - SMT Absolute Maximum Ratings Bias Voltage Range (Vdd) +7.0 Vdc Control Voltage Range (A & B) -0.5V to Vdd +1 Vdc Channel Temperature 150 C Thermal Resistance Insertion Loss Path Terminated Path 144 C/W 300 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C Maximum Input Power Vdd = +5 Vdc Insertion Loss Path Terminated Path +28.5 dBm +25 dBm ESD Sensitivity (HBM) Class 1A Truth Table Control Input Signal Path State A B RFC to: LOW LOW RF1 HIGH LOW RF2 LOW HIGH RF3 HIGH HIGH RF4 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL N/C LEADS, GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Leadframe Plating HMC241ALP3E RoHS-compliant Low Stress Injection Molded Plastic 100% Matte Tin MSL Rating MSL1 [1] Package Marking [2] 241A XXXX [1] Max peak reflow temperature of 260 C [2] 4-Digit lot number XXXX 3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC241ALP3E v00.0513 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4 GHz Pin Descriptions Function Description 1, 4, 9, 12, 15 RF4, RF3, RF2, RF1, RFC This Pin is DC coupled and matched to 50 Ohm. Blocking capacitors are required. 2, 3, 10, 11, 13 N/C This pin should be connected to PCB RF ground to maximize isolation. 5, 14, 16 GND Package bottom has exposed metal paddle that must also be connected to PCB RF ground. 6 Vdd Supply Voltage +5V 10% 7 B See truth table and control voltage table. 8 A See truth table and control voltage table. Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com SWITCHES - MULTI-THROW - SMT Pin Number 4 HMC241ALP3E v00.0513 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4 GHz SWITCHES - MULTI-THROW - SMT Evaluation PCB List of Materials for Evaluation PCB 108333 - HMC241ALP3 [1] Item Description J1 - J5 PCB Mount SMA RF Connector J6 - J9 DC Pin C1 - C5 100 pF Capacitor, 0402 Pkg. C6 10k pF Capacitor, 0603 Pkg. U1 HMC241ALP3E SP4T Switch PCB [2] 104708 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB The circuit board used in the application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [2] Circuit Board Material: Rogers 4350 5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC241ALP3E v00.0513 SWITCHES - MULTI-THROW - SMT GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4 GHz Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC241QS16E-AN HMC241QS16ETR-AN HMC241LP3E-AN HMC241LP3ETR-AN HMC241ALP3E 108333HMC241ALP3 HMC241ALP3ETR