BC COMPONENTS DATA SHEET MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors Product specification Supersedes data of October 1996 File under BC Components, BC05 1999 Apr 29 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors MKT RADIAL EPOXY LACQUERED TYPE PITCH 10/15/22.5/27.5 mm PITCH 7.5 (bent back leads) handbook, full pagewidth 467 (10 mm) 468 (7.5/15 - 22.5 -27.5 mm) CBA819 Fig.1 Simplified outlines. APPLICATIONS * Blocking and coupling * Bypass and energy reservoir. QUICK REFERENCE DATA DESCRIPTION VALUE Capacitance range (E12 series) 0.01 to 10 F Capacitance tolerance 10%; 5% FEATURES Rated (DC) voltage 100 V; 250 V; 400 V; 630 V; 1000 V * Low-inductive wound cell of metallized (PETP) film Rated (AC) voltage 63 V; 160 V; 200 V; 250 V; 400 V Climatic category 55/100/56 * Cell protected by epoxy lacquer Rated temperature 85 C * Radial leads of solder-coated wire Maximum application temperature 100 C * Withstands solvents and rinsing liquids Tangent of loss angle at 10 kHz 100 x 10-4 Reference specifications IEC 60384-2 Performance grade grade 1 (long life) * Small stand-off pips allow removal of solder flux. DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-02/102". 1999 Apr 29 2 BC Components Product specification Metallized polyester film capacitors MKT 467 COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 467 MULTIPLIER (nF) 10.0 mm CAPACITANCE (numerically) 0.1 2 1 3 10 4 100 5 Example: 104 = 10 x 10 = 100 nF 2222 TYPE PACKAGING 467 XX XX X LEAD CONFIGURATION lead length 3.5 mm loose in box 467 lead length 19.0 mm taped on reel 1999 Apr 29 H = 16.0 mm; P0 = 12.7 mm 3 C-TOL 100 V 250 V 400 V 630 V 10% 04 16 28 40 5% 05 17 29 41 10% 51 53 55 57 5% 52 54 56 58 10% 06 18 30 42 5% 07 19 31 43 BC Components Product specification Metallized polyester film capacitors MKT 468 TYPE AND PITCHES MULTIPLIER (nF) 15/7.5 mm MKT 468 0.1 2 CAPACITANCE 1 3 (numerically) 10 4 100 5 15.0 mm 22.5 mm 27.5 mm 15.0 mm MKT/MKT 468 22.5 mm 27.5 mm Example: 104 = 10 x 10 = 100 nF 2222 TYPE PACKAGING 468 XX XX X LEAD CONFIGURATION C-TOL lead length 3.5 mm loose in box long leads MKT 468 taped on reel H = 16.0 mm; P0 = 12.7 mm taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm lead length 3.5 mm MKT/MKT loose in box 468 1999 Apr 29 4 100 V 250 V 400 V 630 V 1000 V 10% 04 16 28 40 - 5% 05 17 29 41 - 10% 51 53 55 57 - 5% 52 54 56 58 - 10% 06 18 30 42 - 5% 07 19 31 43 - 10% 61 63 65 67 - 5% 62 64 66 68 - 10% - - - - 60 BC Components Product specification Metallized polyester film capacitors MKT 467 MKT 467 GENERAL DATA PITCH 10 mm (kinked leads) b l handbook, full pagewidth seating plane(1) h (2) lt P dt A CBA100 (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. Fig.4 Outline. Specific reference data for the 100 V DC capacitors VALUE DESCRIPTION at 1 kHz at 10 kHz 75 x 10-4 120 x 10-4 Tangent of loss angle: 0.56 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 100 V (DC) 30 V/s RC between leads, for C > 0.33 F at 100 V; 1 minute >5000 s R between interconnecting leads and casing; 100 V; 1 minute >30000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute Withstanding (DC) voltage between leads and case 200 V; 1 minute Available 100 V DC versions PACKAGING(1) DIMENSIONS lt = 3.5 0.5 mm Loose in box lt = 19.0 4.0 mm Taped on reel H = 16.0 mm; note 2 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 467 04... preferred 5% 2222 467 05... preferred 10% 2222 467 51... on request 5% 2222 467 52... on request 10% 2222 467 06... on request 5% 2222 467 07... on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 5 BC Components Product specification Metallized polyester film capacitors MKT 467 URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x h max x lmax (mm) LOOSE IN BOX MASS (g) C-tol = 10% catalogue number(1) C-tol = 5% last 5 digits(1) Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 0.5 mm 0.56 4.5 x 13.5 x 12.5 0.5 2222 467 04564 .. 05564 0.68 5.0 x 14.0 x 12.5 0.6 2222 467 04684 .. 05684 0.82 5.5 x 14.5 x 12.5 0.7 2222 467 04824 .. 05824 1.0 6.0 x 15.0 x 12.5 0.7 2222 467 04105 .. 05105 Note 1. The shading indicates preferred types. 1999 Apr 29 6 BC Components Product specification Metallized polyester film capacitors MKT 467 MKT 467 GENERAL DATA PITCH 10 mm (kinked leads) b l handbook, full pagewidth seating plane(1) h (2) lt dt A P CBA100 (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. Fig.5 Outline. Specific reference data for the 250 V DC capacitors VALUE DESCRIPTION at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 120 x 10-4 225 x 10-4 Tangent of loss angle: 0.18 F < C 0.22 F Rated voltage pulse slope (dU/dt)R at 250 V (DC) 120 V/s R between leads, for C 0.33 F at 100 V; 1 minute >30000 M R between interconnecting leads and casing; 100 V; 1 minute >30000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute Withstanding (DC) voltage between leads and case 500 V; 1 minute Available 250 V DC versions PACKAGING(1) DIMENSIONS lt = 3.5 0.5 mm Loose in box lt = 19.0 4.0 mm Taped on reel H = 16.0 mm; note 2 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 467 16... preferred 5% 2222 467 17... preferred 10% 2222 467 53... on request 5% 2222 467 54... on request 10% 2222 467 18... on request 5% 2222 467 19... on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 7 BC Components Product specification Metallized polyester film capacitors MKT 467 URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) C-tol = 10% catalogue number(1) C-tol = 5% last 5 digits(1) Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 0.18 5.5 x 14.5 x 12.5 0.5 2222 467 16184 .. 17184 0.22 6.0 x 15.0 x 12.5 0.6 2222 467 16224 .. 17224 Note 1. The shading indicates preferred types. 1999 Apr 29 8 BC Components Product specification Metallized polyester film capacitors MKT 467 MKT 467 GENERAL DATA PITCH 10 mm (kinked leads) b l h seating plane(1) h (2) lt (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. A P Fig.6 Outline. dt CBA100 Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 120 x 10-4 200 x 10-4 Tangent of loss angle: C 0.1 F Rated voltage pulse slope (dU/dt)R at 400 V (DC) 170 V/s R between leads, for C 0.33 F at 100 V; 1 minute >30000 M R between interconnecting leads and casing; 100 V; 1 minute >30000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute Withstanding (DC) voltage between leads and case 800 V; 1 minute Available 400 V DC versions PACKAGING(1) DIMENSIONS lt = 3.5 0.5 mm Loose in box lt = 19.0 4.0 mm Taped on reel H = 16.0 mm; note 2 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 467 28... preferred 5% 2222 467 29... preferred 10% 2222 467 55... on request 5% 2222 467 56... on request 10% 2222 467 30... on request 5% 2222 467 31... on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 9 BC Components Product specification Metallized polyester film capacitors MKT 467 URdc = 400 V; URac = 200 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) C-tol = 10% catalogue number(1) C-tol = 5% last 5 digits(1) Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 0.039 5.0 x 14.0 x 12.5 0.5 2222 467 28393 .. 29393 0.047 5.5 x 14.5 x 12.5 0.6 2222 467 28473 .. 29473 0.056 4.5 x 13.5 x 12.5 0.4 2222 467 28563 .. 29563 0.068 5.0 x 14.0 x 12.5 0.5 2222 467 28683 .. 29683 0.082 5.5 x 14.5 x 12.5 0.6 2222 467 28823 .. 29823 0.7 2222 467 28104 .. 29104 0.1 Note 1. The shading indicates preferred types. 1999 Apr 29 10 BC Components Product specification Metallized polyester film capacitors MKT 467 MKT 467 GENERAL DATA PITCH 10 mm (kinked leads) b l handbook, full pagewidth seating plane(1) h (2) lt dt A P CBA100 (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. Fig.7 Outline. Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 120 x 10-4 200 x 10-4 Tangent of loss angle: C 0.033 F Rated voltage pulse slope (dU/dt)R at 630 V (DC) 120 V/s R between leads, for C 0.33 F at 500 V; 1 minute >30000 M R between interconnecting leads and casing; 100 V; 1 minute >30000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute Withstanding (DC) voltage between leads and case 1260 V; 1 minute Available 630 V DC versions PACKAGING(1) DIMENSIONS lt = 3.5 0.5 mm Loose in box lt = 19.0 4.0 mm Taped on reel H = 16.0 mm; note 2 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 467 40... preferred 5% 2222 467 41... preferred 10% 2222 467 57... on request 5% 2222 467 58... on request 10% 2222 467 42... on request 5% 2222 467 43... on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 11 BC Components Product specification Metallized polyester film capacitors MKT 467 URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) C-tol = 10% catalogue number(1) C-tol = 5% last 5 digits(1) Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 0.01 4.0 x 13.0 x 12.5 0.4 0.012 4.5 x 13.5 x 12.5 0.5 2222 467 40123 .. 41123 0.015 5.0 x 14.0 x 12.5 0.5 2222 467 40153 .. 41153 0.018 5.5 x 14.5 x 12.5 0.6 2222 467 40183 .. 41183 2222 467 40103 .. 41103 0.022 5.0 x 14.0 x 12.5 0.5 2222 467 40223 .. 41223 0.027 5.5 x 14.5 x 12.5 0.6 2222 467 40273 .. 41273 0.033 6.0 x 15.0 x 12.5 0.6 2222 467 40333 .. 41333 Note 1. The shading indicates preferred types. 1999 Apr 29 12 BC Components Product specification Metallized polyester film capacitors MKT 468 MKT 468 GENERAL DATA PITCH 15/22.5 mm; PITCH 7.5 mm (bent back leads) l handbook, full pagewidth l b seating plane(1) b h h' F' (3) (2) F lt H dt 10 P Odt A Dimensions in mm. (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm.; F = 7.5 +0.6/-0.1 mm. 15 CBA818 Fig.8 Outline. Specific reference data for the 100 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 10.0 F Rated voltage pulse slope (dU/dt)R at 100 V (DC): lmax = 17.5 mm lmax = 26.0 mm RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz at 10 kHz 75 x 10-4 120 x 10-4 20 V/s 10 V/s >5000 s >30000 M 160 V; 1 minute 200 V; 1 minute Available 100 V DC versions PACKAGING(1) DIMENSIONS C-tol 10% 5% 10% 5% 10% 5% 10% 5% lt = 3.5 0.5 mm Loose in box long leads; note 2 Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 3 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 3 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 468 04... 2222 468 05... 2222 468 51... 2222 468 52... 2222 468 06... 2222 468 07... 2222 468 61... 2222 468 62... ORDERING preferred preferred on request on request on request on request preferred preferred Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. Length of long leads: lt = 19.0 4.0 mm for lead pitch = 15.0 mm and 25.0 4.0 mm for lead pitch = 22.5 mm. 3. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 13 BC Components Product specification Metallized polyester film capacitors MKT 468 URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = mm(2) short leads pitch 7.5 mm (bent back) C-tol = 10% C-tol = 5% catalogue number(3) last 5 digits(3) C-tol = 10% C-tol = 5% last 5 digits(3) Pitch = 15.0 0.4 mm (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 1.2 5.5 x 14.5 (16.0) x 17.5 0.7 2222 468 04125 .. 05125 .. 61125 .. 62125 1.5 6.0 x 15.0 (16.5) x 17.5 0.9 2222 468 04155 .. 05155 .. 61155 .. 62155 1.8 6.5 x 15.5 (17.0) x 17.5 1.0 2222 468 04185 .. 05185 .. 61185 .. 62185 2.2 7.0 x 16.0 (17.5) x 17.5 1.2 2222 468 04225 .. 05225 .. 61225 .. 62225 2.7 8.0 x 17.0 (18.5) x 17.5 1.4 2222 468 04275 .. 05275 .. 61275 .. 62275 3.3 8.5 x 17.5 (19.0) x 17.5 1.5 2222 468 04335 .. 05335 .. 61335 .. 62335 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 3.9 6.5 x 18.5 x 26.0 2.8 2222 468 04395 .. 05395 4.7 7.0 x 19.5 x 26.0 3.2 2222 468 04475 .. 05475 5.6 7.5 x 20.0 x 26.0 3.5 2222 468 04565 .. 05565 6.8 8.5 x 21.5 x 26.0 4.1 2222 468 04685 .. 05685 8.2 9.5 x 22.5 x 26.0 4.8 2222 468 04825 .. 05825 10.0 10.5 x 23.5 x 26.0 5.5 2222 468 04106 .. 05106 not available Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 14 BC Components Product specification Metallized polyester film capacitors MKT 468 GENERAL DATA MKT 468 PITCH 15/22.5/27.5 mm; PITCH 7.5 mm (bent back leads) l handbook, full pagewidth l b seating plane(1) h b h' F' (3) (2) F lt H 10 P Odt A Dimensions in mm. (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm.; F = 7.5 +0.6/-0.1 mm. dt 15 CBA818 Fig.9 Outline. Specific reference data for the 250 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.47 F C > 0.47 F Rated voltage pulse slope (dU/dt)R at 250 V (DC): lmax = 17.5 mm lmax = 26.0 mm lmax = 30.0 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 120 x 10-4 120 x 10-4 225 x 10-4 - 45 V/s 20 V/s 15 V/s >30000 M >10000 s >30000 M 400 V; 1 minute 500 V; 1 minute Available 250 V DC versions PACKAGING(1) DIMENSIONS C-tol 10% 5% 10% 5% 10% 5% 10% 5% lt = 3.5 0.5 mm Loose in box long leads; note 2 Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 3 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 3 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 468 16... 2222 468 17... 2222 468 53... 2222 468 54... 2222 468 18... 2222 468 19... 2222 468 63... 2222 468 64... ORDERING preferred preferred on request on request on request on request preferred preferred Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: lt = 19.0 4.0 mm for lead pitch = 15.0 mm, 25.04.0 mm for lead pitch = 22.5 mm and 24.0 4.0 mm for lead pitch = 27.5 mm. 3. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 15 BC Components Product specification Metallized polyester film capacitors MKT 468 URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) short leads pitch 7.5 mm (bent back) C-tol = 10% C-tol = 5% catalogue number(3) last 5 digits(3) C-tol = 10% C-tol = 5% last 5 digits(3) Pitch = 15.0 0.4 mm (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.27 5.0 x 14.0 (15.5) x 17.5 0.6 2222 468 16274 .. 17274 .. 63274 .. 64274 0.33 5.5 x 14.5 (16.0) x 17.5 0.7 2222 468 16334 .. 17334 .. 63334 .. 64334 0.39 6.0 x 15.0 (16.5) x 17.5 0.9 2222 468 16394 .. 17394 .. 63394 .. 64394 0.47 6.5 x 15.5 (17.0) x 17.5 1.0 2222 468 16474 .. 17474 .. 63474 .. 64474 0.56 7.5 x 16.5 (18.0) x 17.5 1.3 2222 468 16564 .. 17564 .. 63564 .. 64564 0.68 8.0 x 17.0 (18.5) x 17.5 1.4 2222 468 16684 .. 17684 .. 63684 .. 64684 0.82 8.5 x 17.5 (19.0) x 17.5 1.5 2222 468 16824 .. 17824 .. 63824 .. 64824 1.0 8.0 x 20.0 (21.5) x 17.5 1.7 2222 468 16105 .. 17105 .. 63105 .. 64105 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 1.2 7.0 x 19.0 x 26.0 3.2 2222 468 16125 .. 17125 .. 63125 .. 64125 1.5 8.0 x 21.0 x 26.0 3.8 2222 468 16155 .. 17155 .. 63155 .. 64155 1.8 9.0 x 22.0 x 26.0 4.1 2222 468 16185 .. 17185 .. 63185 .. 64185 2.2 10.0 x 23.0 x 26.0 4.8 2222 468 16225 .. 17225 .. 63225 .. 64225 2.7 11.0 x 24.0 x 26.0 5.9 2222 468 16275 .. 17275 .. 63275 .. 64275 3.3 12.5 x 25.5 x 26.0 6.9 2222 468 16335 .. 17335 .. 63335 .. 64335 3.9 13.5 x 26.5 x 26.0 7.5 2222 468 16395 .. 17395 .. 63395 .. 64395 4.7 15.0 x 28.0 x 26.0 8.6 2222 468 16475 .. 17475 .. 63475 .. 64475 .. 17565 .. 63565 .. 64565 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 5.6 15.0 x 28.0 x 30.0 9.1 2222 468 16565 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 16 BC Components Product specification Metallized polyester film capacitors MKT 468 GENERAL DATA MKT 468 PITCH 15/22.5/27.5 mm; PITCH 7.5 mm (bent back leads) l handbook, full pagewidth l b seating plane(1) h b h' F' (3) (2) F lt H dt 10 P Odt A Dimensions in mm. (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm.; F = 7.5 +0.6/-0.1 mm. 15 CBA818 Fig.10 Outline. Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: 0.12 < C 0.47 F C > 0.47 F Rated voltage pulse slope (dU/dt)R at 400 V (DC): lmax = 17.5 mm lmax = 26.0 mm lmax = 30.0 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 120 x 10-4 120 x 10-4 225 x 10-4 - 65 V/s 30 V/s 25 V/s >30000 M >10000 s >30000 M 640 V; 1 minute 800 V; 1 minute Available 400 V DC versions PACKAGING(1) DIMENSIONS C-tol 10% 5% 10% 5% 10% 5% 10% 5% lt = 3.5 0.5 mm Loose in box long leads; note 2 Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 3 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 3 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 468 28... 2222 468 29... 2222 468 55... 2222 468 56... 2222 468 30... 2222 468 31... 2222 468 65... 2222 468 66... ORDERING preferred preferred on request on request on request on request preferred preferred Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: lt = 19.0 4.0 mm for lead pitch = 15.0 mm, 25.0 4.0 mm for lead pitch = 22.5 mm and 24.0 4.0 mm for lead pitch = 27.5 mm. 3. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 17 BC Components Product specification Metallized polyester film capacitors MKT 468 URdc = 400 V; URac = 200 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) short leads pitch 7.5 mm (bent back) C-tol = 10% C-tol = 5% catalogue number(3) last 5 digits(3) C-tol = 10% C-tol = 5% last 5 digits(3) Pitch = 15.0 0.4 mm (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.12 5.0 x 14.0 (15.5) x 17.5 0.6 2222 468 28124 .. 29124 .. 65124 .. 66124 0.15 6.0 x 15.0 (16.5) x 17.5 0.9 2222 468 28154 .. 29154 .. 65154 .. 66154 0.18 6.5 x 15.5 (17.0) x 17.5 1.0 2222 468 28184 .. 29184 .. 65184 .. 66184 0.22 7.0 x 16.0 (17.5) x 17.5 1.2 2222 468 28224 .. 29224 .. 65224 .. 66224 0.27 7.5 x 16.5 (18.0) x 17.5 1.3 2222 468 28274 .. 29274 .. 65274 .. 66274 0.33 8.5 x 17.5 (19.0) x 17.5 1.5 2222 468 28334 .. 29334 .. 65334 .. 66334 0.39 7.5 x 19.5 (21.0) x 17.5 1.3 2222 468 28394 .. 29394 .. 65394 .. 66394 0.47 8.5 x 20.5 (22.0) x 17.5 1.5 2222 468 28474 .. 29474 .. 65474 .. 66474 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.56 7.5 x 19.5 x 26.0 3.2 2222 468 28564 .. 29564 .. 65564 .. 66564 0.68 8.0 x 21.0 x 26.0 3.8 2222 468 28684 .. 29684 .. 65684 .. 66684 0.82 9.0 x 22.0 x 26.0 4.5 2222 468 28824 .. 29824 .. 65824 .. 66824 1.0 10.0 x 23.0 x 26.0 5.2 2222 468 28105 .. 29105 .. 65105 .. 66105 1.2 11.0 x 24.0 x 26.0 5.9 2222 468 28125 .. 29125 .. 65125 .. 66125 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 1.5 11.5 x 24.5 x 30.0 6.5 2222 468 28155 .. 29155 .. 65155 .. 66155 1.8 12.5 x 25.5 x 30.0 7.1 2222 468 28185 .. 29185 .. 65185 .. 66185 2.2 14.0 x 27.0 x 30.0 8.2 2222 468 28225 .. 29225 .. 65225 .. 66225 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 18 BC Components Product specification Metallized polyester film capacitors MKT 468 MKT 468 GENERAL DATA PITCH 15/22.5/27.5 mm; PITCH 7.5 mm (bent back leads) l handbook, full pagewidth l b seating plane(1) h b h' F' (3) (2) F lt H dt 10 P Odt A Dimensions in mm. (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm.; F = 7.5 +0.6/-0.1 mm 15 CBA818 Fig.11 Outline. Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F C > 0.47 F Rated voltage pulse slope (dU/dt)R at 630 V (DC): lmax = 17.5 mm lmax = 26.0 mm lmax = 30.0 mm R between leads, for C 0.33 F at 500 V; 1 minute RC between leads, for C > 0.33 F at 500 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 75 x 10-4 120 x 10-4 120 x 10-4 120 x 10-4 200 x 10-4 225 x 10-4 - 90 V/s 35 V/s 30 V/s >30000 M >10000 s >30000 M 1008 V; 1 minute 1260 V; 1 minute Available 630 V DC versions PACKAGING(1) DIMENSIONS C-tol 10% 5% 10% 5% 10% 5% 10% 5% lt = 3.5 0.5 mm Loose in box long leads; note 2 Taped on reel H = 16.0 mm; P0 = 12.7 mm; note 3 Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm; note 3 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 468 40... 2222 468 41... 2222 468 57... 2222 468 58... 2222 468 42... 2222 468 43... 2222 468 67... 2222 468 68... ORDERING preferred preferred on request on request on request on request preferred preferred Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: lt = 19.0 4.0 mm for lead pitch = 15.0 mm, 25.0 4.0 mm for lead pitch = 22.5 mm and 24.0 4.0 mm for lead pitch = 27.5 mm. 3. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 19 BC Components Product specification Metallized polyester film capacitors MKT 468 URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) short leads pitch 7.5 mm (bent back) C-tol = 10% C-tol = 5% catalogue number(3) last 5 digits(3) C-tol = 10% C-tol = 5% last 5 digits(3) Pitch = 15.0 0.4 mm (pitch = 7.5 0.4 mm for bent back leads); dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.039 5.0 x 14.0 (15.5) x 17.5 0.6 2222 468 40393 .. 41393 .. 67393 .. 68393 0.047 5.5 x 14.5 (16.0) x 17.5 0.7 2222 468 40473 .. 41473 .. 67473 .. 68473 0.056 6.0 x 15.0 (16.5) x 17.5 0.9 2222 468 40563 .. 41563 .. 67563 .. 68563 0.068 7.0 x 16.0 (17.5) x 17.5 1.2 2222 468 40683 .. 41683 .. 67683 .. 68683 0.082 7.5 x 16.5 (18.0) x 17.5 1.3 2222 468 40823 .. 41823 .. 67823 .. 68823 0.1 8.0 x 17.0 (18.5) x 17.5 1.4 2222 468 40104 .. 41104 .. 67104 .. 68104 0.12 7.5 x 19.5 (21.0) x 17.5 1.3 2222 468 40124 .. 41124 .. 67124 .. 68124 0.15 8.5 x 20.5 (22.0) x 17.5 1.5 2222 468 40154 .. 41154 .. 67154 .. 68154 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.18 7.5 x 19.5 x 26.0 3.5 2222 468 40184 .. 41184 .. 67184 .. 68184 0.22 8.0 x 21.0 x 26.0 3.8 2222 468 40224 .. 41224 .. 67224 .. 68224 0.27 9.0 x 22.0 x 26.0 4.5 2222 468 40274 .. 41274 .. 67274 .. 68274 0.33 10.0 x 23.0 x 26.0 5.2 2222 468 40334 .. 41334 .. 67334 .. 68334 0.39 11.0 x 24.0 x 26.0 5.9 2222 468 40394 .. 41394 .. 67394 .. 68394 0.47 12.5 x 25.5 x 26.0 6.9 2222 468 40474 .. 41474 .. 67474 .. 68474 0.56 13.5 x 26.5 x 26.0 7.5 2222 468 40564 .. 41564 .. 67564 .. 68564 0.68 15.0 x 28.0 x 26.0 8.6 2222 468 40684 .. 41684 .. 67684 .. 68684 .. 41824 .. 67824 .. 68824 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.82 15.0 x 28.0 x 30.0 8.8 2222 468 40824 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 1999 Apr 29 20 BC Components Product specification Metallized polyester film capacitors MKT/MKT 468 MKT/MKT 468 GENERAL DATA PITCH 27.5 mm b l handbook, full pagewidth h seating plane(1) (2) lt P dt A CBA266 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Fig.12 Outline. Specific reference data for the 1000 V DC capacitors VALUE DESCRIPTION at 1 kHz at 10 kHz at 100 kHz C 0.1 F 75 x 10-4 120 x 10-4 200 x 10-4 0.1 F < C 0.22 F 75 x 10-4 120 x 10-4 225 x 10-4 Tangent of loss angle: Rated voltage pulse slope (dU/dt)R at 1000 V (DC): P = 15 mm 200 V/s P = 22.5 mm 120 V/s P = 27.5 mm 100 V/s R between leads, for C 0.33 F at 500 V; 1 minute >30000 M R between interconnecting leads and casing; 100 V; 1 minute >30000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case 1600; 1 minute 2000 V; 1 minute Available 1000 V DC versions PACKAGING(1) Loose in box DIMENSIONS lt = 3.5 0.5 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 468 60... preferred Note 1. For SPQ refer to this handbook, chapter "Packaging information". 1999 Apr 29 21 BC Components Product specification Metallized polyester film capacitors MKT/MKT 468 URdc = 1000 V; URac = 400 V C (F) DIMENSIONS bmax x hmax x lmax (mm) CATALOGUE NUMBER(1) MASS (g) LOOSE IN BOX; lt = 3.5 0.5 mm C-tol = 10% Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm; A = 2.5+1.4/-0.5 mm 0.015 2222 468 60153 5.5 x 15.0 x 17.5 0.9 0.022 6.0 x 15.0 x 17.5 1.1 2222 468 60223 0.027 6.5 x 15.5 x 17.5 1.4 2222 468 60273 0.033 8.0 x 17.0 x 17.5 1.5 2222 468 60333 0.039 8.5 x 17.5 x 17.5 1.8 2222 468 60393 0.047 9.5 x 18.5 x 17.5 2.5 2222 468 60473 0.018 2222 468 60183 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5+1.4/-0.5 mm 0.056 7.0 x 20.0 x 26.0 3.1 2222 468 60563 0.068 7.5 x 20.5 x 26.0 3.6 2222 468 60683 0.082 8.5 x 21.5 x 26.0 3.9 2222 468 60823 0.1 9.0 x 22.0 x 26.0 4.2 2222 468 60104 0.12 10.0 x 23.0 x 26.0 4.5 2222 468 60124 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5+1.4/-0.5 mm 0.15 10.0 x 23.0 x 30.0 6.5 2222 468 60154 0.18 11.0 x 24.5 x 30.0 7.0 2222 468 60184 0.22 12.0 x 25.5 x 30.0 8.0 2222 468 60224 Note 1. The shading indicates preferred types. 1999 Apr 29 22 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors CONSTRUCTION Mounting Description NORMAL USE * Low-inductive wound cell of metallized polyethylene terephthalate film The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter "Packaging information". * Protected by a hard, water repellent, solvent resistant epoxy lacquer * Radial leads, copper wire, solder coated. SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK metallized polyester film In order to withstand vibration and shock tests, it must be ensured that the underside of the crimps are in good contact with the printed-circuit board: handbook, halfpage * For pitches 15 mm capacitors shall be mechanically fixed by the leads. * For larger pitches the capacitors shall be mounted in the same way and the body clamped. metal spray layer Storage temperature * Storage temperature: Tstg = -25 to +40 C with RH maximum 80% without condensation. connecting wire CBA073 RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Fig.13 Construction: MKT 100, 250, 400 and 630 V. Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. metallized polyester film For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. handbook, halfpage metal spray layer connecting wire CBA229 Fig.14 Construction: MKT/MKT 1000 V. 1999 Apr 29 23 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors CHARACTERISTICS Capacitance CBA074 2 handbook, full pagewidth C C (%) 1 0 -1 -2 -3 102 103 104 105 f (Hz) Fig.15 Capacitance change as a function of frequency: typical curve. CBA922 6 C C (%) 4 handbook, full pagewidth 2 0 -2 max. 400 V - 630 V - 1000 V 250 V typical 100 V -4 min. -6 -60 - 20 20 60 Tamb (C) Fig.16 Capacitance as a function of ambient free air temperature, measured at 1 kHz, 1 V. 1999 Apr 29 24 100 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors Impedance CBA820 103 handbook, full pagewidth MKT 467/468 Impedance () 102 400 V; 3 9 0 nF 10 1 10-1 10-2 103 104 105 106 107 f (Hz) Fig.17 Impedance as a function of frequency: typical curve. Maximum DC and AC voltage as a function of temperature CBA086 1.2 handbook, full pagewidth factor 1.0 0.8 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 80 100 Tamb (C) Fig.18 Multiplying factor for DC and AC voltage as a function of temperature. 1999 Apr 29 25 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors Maximum RMS voltage and AC current (sinewave) as a function of frequency CBA809 102 handbook, full pagewidth MKT 467/468 AC voltage (V) 10 1 102 1 F (lmax = 12.5 mm) 1.5 F (lmax = 17.5 mm) 3.9 F (lmax = 26.0 mm) 10 F (lmax = 26.0 mm) 103 104 105 106 f (Hz) Fig.19 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 100 V. CBA810 102 handbook, full pagewidth MKT 467/468 AC voltage (V) 10 1 F (lmax = 12.5 mm) 1.5 F (lmax = 17.5 mm) 3.9 F (lmax = 26.0 mm) 10 F (lmax = 26.0 mm) 1 10 102 103 104 f (Hz) 105 Fig.20 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 100 C for URdc = 100 V. 1999 Apr 29 26 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors CBA811 103 handbook, full pagewidth MKT 467/468 AC voltage (V) 102 10 220 nF (lmax = 12.5 mm) 2.2 F (lmax = 26.0 mm) 5.6 F (lmax = 30.0 mm) 1 10 102 103 104 105 106 f (Hz) Fig.21 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V. CBA812 103 handbook, full pagewidth MKT 467/468 AC voltage (V) 102 10 220 nF (lmax = 12.5 mm) 2.2 F (lmax = 26.0 mm) 5.6 F (lmax = 30.0 mm) 1 10 102 103 104 105 f (Hz) 106 Fig.22 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 100 C for URdc = 250 V. 1999 Apr 29 27 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors CBA813 103 handbook, full pagewidth MKT 467/468 AC voltage (V) 102 10 100 nF (lmax = 12.5 mm) 220 nF (lmax = 17.5 mm) 1.0 F (lmax = 26.0 mm) 2.2 F (lmax = 30.0 mm) 1 10 102 103 104 105 106 f (Hz) Fig.23 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V. CBA814 103 handbook, full pagewidth MKT 467/468 AC voltage (V) 102 10 100 nF (lmax = 12.5 mm) 220 nF (lmax = 17.5 mm) 1.0 F (lmax = 26.0 mm) 2.2 F (lmax = 30.0 mm) 1 10 102 103 104 105 f (Hz) 106 Fig.24 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 100 C for URdc = 400 V. 1999 Apr 29 28 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors CBA815 103 handbook, full pagewidth MKT 467/468 AC voltage (V) 102 10 nF (lmax = 12.5 mm) 10 100 nF (lmax = 17.5 mm) 220 nF (lmax = 26.0 mm) 470 nF (lmax = 26.0 mm) 820 nF (lmax = 30.0 mm) 1 10 102 103 104 105 106 f (Hz) Fig.25 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 630 V. CBA816 103 handbook, full pagewidth MKT 467/468 AC voltage (V) 102 10 10 nF (lmax = 12.5 mm) 100 nF (lmax = 17.5 mm) 220 nF (lmax = 26.0 mm) 470 nF (lmax = 26.0 mm) 820 nF (lmax = 30.0 mm) 1 10 102 103 104 105 f (Hz) 106 Fig.26 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 100 C for URdc = 630 V. 1999 Apr 29 29 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors CBA817 103 handbook, full pagewidth MKT/MKT 468 AC voltage (V) 102 10 220 nF 1 10 102 103 104 105 106 f (Hz) Fig.27 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 1000 V. CBA950 103 handbook, full pagewidth MKT/MKT 468 AC voltage (V) 102 10 220 nF 1 10 102 103 104 105 f (Hz) 106 Fig.28 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 100 C for URdc = 1000 V. Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = x C x U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 19 to 28. 1999 Apr 29 30 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors Tangent of loss angle CBA087 103 handbook, full pagewidth dissipation factor (x 10-4) 102 10 102 103 104 f (Hz) 105 Fig.29 Tangent of loss angle as a function of frequency: typical curve. Insulation resistance CBA088 105 RC (s) 104 103 102 -50 0 50 Tamb (C) Fig.30 RC product as a function of ambient free air temperature: typical curve. 1999 Apr 29 31 100 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors Maximum allowed component temperature rise (T) as a function of the ambient temperature (Tamb) CBA821 20 handbook, full pagewidth T (C) 15 10 5 0 -60 -40 -20 0 20 40 60 80 100 Tamb (C) Fig.31 Maximum allowed component temperature rise as a function of the ambient temperature. 1999 Apr 29 32 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/C Table 1 Heat conductivity ORIGINAL PITCH (mm) bmax (mm) 10 15 22.5 27.5 4.0 4.0 5.0 - - 4.5 4.5 6.0 - - 5.0 5.0 6.0 12.0 13.0 5.5 6.0 6.5 13.0 15.0 6.0 6.0 6.5 13.0 15.0 6.5 6.5 8.0 15.0 17.0 7.0 - 8.0 15.0 17.0 7.5 - 9.0 17.0 18.0 8.0 - 9.0 17.0 20.0 8.5 - 11.0 18.0 20.0 9.0 - 11.0 18.0 22.0 9.5 - 12.0 20.0 22.0 10.0 - 12.0 20.0 23.0 10.5 - - 22.0 25.0 11.0 - - - 25.0 11.5 - - - 27.0 12.0 - - - 27.0 12.5 - - - 30.0 13.0 - - - 30.0 13.5 - - - 30.0 14.0 - - - 30.0 14.5 - - - 33.0 15.0 - - - 33.0 15.5 - - - 37.0 16.0 - - - 37.0 Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. Power dissipation can be calculated in accordance with Chapter "Introduction" section, "Maximum power dissipation". The component temperature rise (T) can be measured (see section "Measuring the component temperature" for more details) or calculated by T = P G : * T = component temperature rise (C). * P = power dissipation of the component (mW). * G = heat conductivity of the component (mW/C). 1999 Apr 29 33 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors Measuring the component temperature A thermocouple must be attached to the capacitor body as in Fig.32. handbook, halfpage thermocouple CBA771 Fig.32 Mounting the thermocouple. The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by T = T c - T amb . To avoid radiation or convection, the capacitor should be tested in a wind-free box. 1999 Apr 29 34 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors Application note and limiting conditions These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described below. These mains applications are strictly regulated for safety standards and therefore electromagnetic interference suppression capacitors conforming to the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: T dU 2 dU 2 x -------- x dt < U Rdc x -------- dt dt rated 0 T is the pulse duration. The rated voltage pulse slope is valid for ambient temperatures up to 85 C. For higher temperatures a derating factor of 3% per K shall be applied. 4. The maximum component surface temperature rise must be lower than the limits in Fig.31. 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in Table 1. 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes and surge voltages from the mains included): VOLTAGE CONDITIONS FOR 6 ABOVE ALLOWED VOLTAGES Tamb 85 C 85 C < Tamb 100 C URac 0.8 x URac Maximum temporary RMS -overvoltage (<24 hours) 1.25 x URac 1.0 x URac Maximum peak voltage (Vo-p) (<2 s) 1.6 x URdc 1.3 x URdc Maximum continuous RMS voltage 1999 Apr 29 35 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors Example C = 3300 nF - 100 V used for the voltage signal shown in Fig.33. Up-p = 80 V; Up = 70 V; T1 = 0.5 ms; T2 = 1 ms. The ambient temperature is 35 C. Checking the conditions: 1. The peak voltage Up = 70 V is lower than 100 V (DC). 2. The peak-to-peak voltage 80 V is lower than 2 x 2 x 63 V (AC) = 178 U p - p . 3. The voltage pulse slope dU/dt = 80 V/500 s = 0.16 V/ s. This is lower than 20 V/s (see specific reference data for each version). 4. The dissipated power is 60 mW as calculated with Fourier terms. 60 mW The temperature rise for bmax = 8.5 mm and pitch = 15 mm will be ------------------------------- = 5.5 C . 11 mW C This is lower than 15 C temperature rise at 35 C; see Fig.31. 5. Not applicable. 6. Not applicable. voltage handbook, full pagewidth Up Up-p time T1 T2 CBA865 Fig.33 Voltage signal. 1999 Apr 29 36 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors MARKING Product marking handbook, halfpage STYLE MKT 467/468 470n K 100 Capacitors with original pitch = 10 mm The capacitors are marked on the top in black ink (see Fig.34) with the following information: 1. Capacitance code in accordance with "IEC 60062" CBA109 2. Tolerance on rated capacitance: K = 10%; J = 5% 3. Rated voltage (DC). Fig.34 Example of marking for a capacitor with original pitch = 10 mm. Capacitors with original pitch = 15, 22.5 and 27.5 mm The capacitors are marked on the top in black ink (see Fig.35) with the following information: handbook, halfpage 1. Manufacturer's symbol PHILIPS 2. Capacitance code in accordance with "IEC 60062" 3. Tolerance on rated capacitance: K = 10%; J = 5% 820n J 100 4. Rated voltage (DC). CBA110 Fig.35 Example of marking for a capacitor with original pitch = 15, 22.5 and 27.5 mm. STYLE MKT/MKT 468 The capacitors are marked on the top in black ink (see Fig.36) with the following information: 1. Capacitance code in accordance with "IEC 60062" handbook, halfpage 2. Tolerance on rated capacitance: K = 10%; J = 5% PHILIPS 3. Rated voltage (DC) 4. Code for dielectric material (MKT/MKT) 180n J 1000 MKT/MKT468 6 CBA651 5. Manufacturer's symbol. Fig.36 Example of marking. 1999 Apr 29 37 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors Package marking The package containing the capacitors is marked as shown in Fig.37. Please note: In due time BC COMPONENTS will replace PHILIPS COMPONENTS Barcode label marking handbook, full pagewidth 1. 2. LINE MARKING EXPLANATION 3. 1 Manufacturer's name 4. 2 Country of origin 5. 3 Sub-family 4 Type description 5 Capacitance value, tolerance, voltage and climatic category ("IEC 60068-1") 6 Batchnumber (only for capacitors from PRC) 7 * Country of origin: Belgium 6. Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO 7. 8. * Country of origin: China Preference origin code: N Country of origin in code: 260 (PRC) Responsible production centre: 07 9. 10. 8 Product type description 9 Quantity and production period, year and week code 10 Product code (12NC) CCA338 Fig.37 Barcode label. 1999 Apr 29 38 BC Components Product specification MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors QUICK REFERENCE TEST REQUIREMENTS (see note 1) TEST PROCEDURE (quick reference) REQUIREMENTS Robustness of leads Tensile: "IEC 60068-2-21" load 10 N; 10 s Bending: "IEC 60068-2-21" load 5 N; 4 x 90 Resistance to soldering heat "IEC 60068-2-20" solder bath: 260 C; 10 s Resistance to solvents isopropyl alcohol; 23 C; 5 minutes no visible damage legible marking C/C 2% tan 30 x 10-4; note 2 Robustness of component Vibration: "IEC 60068-2-6" Shock: "IEC 60068-2-27" 10 to 55 Hz; amplitude 0.75 mm or acceleration 98 m/s2; 6 hours half sinewave; 490 m/s2; 11 ms C/C 3% tan 30 x 10-4; note 2 Climatic sequence Dry heat: "IEC 60068-2-2" 16 hours; 100 C Damp heat cyclic, test Db, first cycle: "IEC 60068-2-30" Cold: "IEC 60068-2-1" C/C 5% tan 50 x 10-4; note 2 2 hours; -55 C Rins 50% of specified value Damp heat cyclic, test Db, remaining cycles: "IEC 60068-2-30" Other applicable tests Damp heat, steady state: "IEC 60068-2-3" 56 days; 40 C; 90 to 95% RH C/C 5% tan 50 x 10-4; note 2 Rins 50% of specified value Endurance (DC): "IEC 60384-2" C/C 5% 2000 hours: 1.25 x URdc; 85 C 1 x URdc; 100 C tan 30 x 10-4; note 2 Heat storage: "IEC 60384-2" 2000 hours; 100 C C/C 3% Resistance to soldering heat with preheating: "IEC 60384-2" body temperature: 100 C; bath temperature: 260 C; dwell time: 10 s Rins 50% of specified value tan 30 x 10-4; note 2 C/C 2% (C 10 nF) C/C 1% (C > 10 nF) tan 30 x 10-4; note 2 Notes 1. For detailed information, see "Type detail specification HQN-384-02/102". 2. Measuring frequency 10 kHz. 1999 Apr 29 39