DATA SH EET
Product specification
Supersedes data of October 1996
File under BC Components, BC05
1999 Apr 29
BC COMPONENTS
MKT 467/468
MKT/MKT 468
Metallized polyester film capacitors
1999 Apr 29 2
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
MKT RADIAL EPOXY LACQUERED TYPE PITCH 10/15/22.5/27.5 mm
PITCH 7.5 (bent back leads)
Fig.1 Simplified outlines.
handbook, full pagewidth
467
(10 mm) 468
(7.5/15 - 22.5 -27.5 mm)
CBA819
APPLICATIONS
•Blocking and coupling
•Bypass and energy reservoir.
FEATURES
•Low-inductive wound cell of
metallized (PETP) film
•Cell protected by epoxy lacquer
•Radial leads of solder-coated wire
•Withstands solvents and rinsing
liquids
•Small stand-off pips allow removal
of solder flux.
DETAIL SPECIFICATION
For more detailed data and test
requirements see
“Type detail
specification HQN-384-02/102”
.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Capacitance range (E12 series) 0.01 to 10 µF
Capacitance tolerance ±10%; ±5%
Rated (DC) voltage 100 V; 250 V; 400 V; 630 V; 1000 V
Rated (AC) voltage 63 V; 160 V; 200 V; 250 V; 400 V
Climatic category 55/100/56
Rated temperature 85 °C
Maximum application temperature 100 °C
Tangent of loss angle at 10 kHz 100 ×10−4
Reference specifications IEC 60384-2
Performance grade grade 1 (long life)
1999 Apr 29 3
BC Components Product specification
Metallized polyester film capacitors MKT 467
COMPOSITION OF CATALOGUE NUMBER
TYPE AND PITCHES
467 10.0 mm
TYPE PACKAGING LEAD CONFIGURATION C-TOL 100 V 250 V 400 V 630 V
467 loose in box lead length 3.5 mm ±10% 04 16 28 40
±5% 05 17 29 41
lead length 19.0 mm ±10% 51 53 55 57
±5% 52 54 56 58
taped on reel H = 16.0 mm; P0= 12.7 mm ±10% 06 18 30 42
±5% 07 19 31 43
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
CAPACITANCE
(numerically)
Example:
104 = 10 ×10 = 100 nF
2222 467 XX XX X
1999 Apr 29 4
BC Components Product specification
Metallized polyester film capacitors MKT 468
TYPE PACKAGING LEAD CONFIGURATION C-TOL 100 V 250 V 400 V 630 V 1000 V
MKT 468
loose in box lead length 3.5 mm ±10% 04 16 28 40 −
±5% 05 17 29 41 −
long leads ±10% 51 53 55 57 −
±5% 52 54 56 58 −
taped on reel H = 16.0 mm; P0= 12.7 mm ±10% 06 18 30 42 −
±5% 07 19 31 43 −
taped on reel
(bent back) H = 16.0 mm; P0= 15.0 mm ±10% 61 63 65 67 −
±5% 62 64 66 68 −
MKT/MKT
468 loose in box lead length 3.5 mm ±10% −−−−60
2222 468 XX XX X
TYPE AND PITCHES
MKT 468
15/7.5 mm
15.0 mm
22.5 mm
27.5 mm
MKT/MKT 468 15.0 mm
22.5 mm
27.5 mm
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
CAPACITANCE
(numerically)
Example:
104 = 10 ×10 = 100 nF
1999 Apr 29 5
BC Components Product specification
Metallized polyester film capacitors MKT 467
MKT 467 GENERAL DATA PITCH 10 mm (kinked leads)
Specific reference data for the 100 V DC capacitors
Available 100 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz
Tangent of loss angle:
0.56 µF<C≤1.0 µF≤75 ×10−4≤120 ×10−4
Rated voltage pulse slope (dU/dt)R at 100 V (DC) 30 V/µs
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute
Withstanding (DC) voltage between leads and case 200 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 467 04... preferred
±5% 2222 467 05... preferred
lt=19.0 ±4.0 mm ±10% 2222 467 51... on request
±5% 2222 467 52... on request
Taped on reel H =16.0 mm; note 2 ±10% 2222 467 06... on request
±5% 2222 467 07... on request
Fig.4 Outline.
handbook, full pagewidth
seating plane(1)
l
P
h
lt
α
A
CBA100
b
(2)
∅dt
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
1999 Apr 29 6
BC Components Product specification
Metallized polyester film capacitors MKT 467
URdc =100 V; URac =63 V
Note
1. The shading indicates preferred types.
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
C-tol =±10% C-tol =±5%
catalogue number(1) last 5 digits(1)
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm; A =2.0 ±0.5 mm
0.56 4.5 ×13.5 ×12.5 0.5 2222 467 04564 .. 05564
0.68 5.0 ×14.0 ×12.5 0.6 2222 467 04684 .. 05684
0.82 5.5 ×14.5 ×12.5 0.7 2222 467 04824 .. 05824
1.0 6.0 ×15.0 ×12.5 0.7 2222 467 04105 .. 05105
1999 Apr 29 7
BC Components Product specification
Metallized polyester film capacitors MKT 467
MKT 467 GENERAL DATA PITCH 10 mm (kinked leads)
Specific reference data for the 250 V DC capacitors
Available 250 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
0.18 µF<C≤0.22 µF≤75 ×10−4≤120 ×10−4≤225 ×10−4
Rated voltage pulse slope (dU/dt)R at 250 V (DC) 120 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (DC) voltage between leads and case 500 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 467 16... preferred
±5% 2222 467 17... preferred
lt=19.0 ±4.0 mm ±10% 2222 467 53... on request
±5% 2222 467 54... on request
Taped on reel H =16.0 mm; note 2 ±10% 2222 467 18... on request
±5% 2222 467 19... on request
Fig.5 Outline.
handbook, full pagewidth
seating plane(1)
l
P
h
lt
α
A
CBA100
b
(2)
∅dt
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
1999 Apr 29 8
BC Components Product specification
Metallized polyester film capacitors MKT 467
URdc =250 V; URac =160 V
Note
1. The shading indicates preferred types.
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
C-tol =±10% C-tol =±5%
catalogue number(1) last 5 digits(1)
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm; A =2.0 +1.0/−0.5 mm
0.18 5.5 ×14.5 ×12.5 0.5 2222 467 16184 .. 17184
0.22 6.0 ×15.0 ×12.5 0.6 2222 467 16224 .. 17224
1999 Apr 29 9
BC Components Product specification
Metallized polyester film capacitors MKT 467
MKT 467 GENERAL DATA PITCH 10 mm (kinked leads)
Specific reference data for the 400 V DC capacitors
Available 400 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10−4≤120 ×10−4≤200 ×10−4
Rated voltage pulse slope (dU/dt)R at 400 V (DC) 170 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (DC) voltage between leads and case 800 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 467 28... preferred
±5% 2222 467 29... preferred
lt=19.0 ±4.0 mm ±10% 2222 467 55... on request
±5% 2222 467 56... on request
Taped on reel H =16.0 mm; note 2 ±10% 2222 467 30... on request
±5% 2222 467 31... on request
Fig.6 Outline.
h
seating plane(1)
l
P
h
lt
α
A
CBA100
b
(2)
∅dt
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
1999 Apr 29 10
BC Components Product specification
Metallized polyester film capacitors MKT 467
URdc =400 V; URac =200 V
Note
1. The shading indicates preferred types.
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
C-tol =±10% C-tol =±5%
catalogue number(1) last 5 digits(1)
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm; A =2.0 +1.0/−0.5 mm
0.039 5.0 ×14.0 ×12.5 0.5 2222 467 28393 .. 29393
0.047 5.5 ×14.5 ×12.5 0.6 2222 467 28473 .. 29473
0.056 4.5 ×13.5 ×12.5 0.4 2222 467 28563 .. 29563
0.068 5.0 ×14.0 ×12.5 0.5 2222 467 28683 .. 29683
0.082 5.5 ×14.5 ×12.5 0.6 2222 467 28823 .. 29823
0.1 0.7 2222 467 28104 .. 29104
1999 Apr 29 11
BC Components Product specification
Metallized polyester film capacitors MKT 467
MKT 467 GENERAL DATA PITCH 10 mm (kinked leads)
Specific reference data for the 630 V DC capacitors
Available 630 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.033 µF≤75 ×10−4≤120 ×10−4≤200 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC) 120 V/µs
R between leads, for C ≤0.33 µF at 500 V; 1 minute >30000 MΩ
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute
Withstanding (DC) voltage between leads and case 1260 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 467 40... preferred
±5% 2222 467 41... preferred
lt=19.0 ±4.0 mm ±10% 2222 467 57... on request
±5% 2222 467 58... on request
Taped on reel H =16.0 mm; note 2 ±10% 2222 467 42... on request
±5% 2222 467 43... on request
Fig.7 Outline.
handbook, full pagewidth
seating plane(1)
l
P
h
lt
α
A
CBA100
b
(2)
∅dt
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
1999 Apr 29 12
BC Components Product specification
Metallized polyester film capacitors MKT 467
URdc =630 V; URac =250 V
Note
1. The shading indicates preferred types.
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
C-tol =±10% C-tol =±5%
catalogue number(1) last 5 digits(1)
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm; A =2.0 +1.0/−0.5 mm
0.01 4.0 ×13.0 ×12.5 0.4 2222 467 40103 .. 41103
0.012 4.5 ×13.5 ×12.5 0.5 2222 467 40123 .. 41123
0.015 5.0 ×14.0 ×12.5 0.5 2222 467 40153 .. 41153
0.018 5.5 ×14.5 ×12.5 0.6 2222 467 40183 .. 41183
0.022 5.0 ×14.0 ×12.5 0.5 2222 467 40223 .. 41223
0.027 5.5 ×14.5 ×12.5 0.6 2222 467 40273 .. 41273
0.033 6.0 ×15.0 ×12.5 0.6 2222 467 40333 .. 41333
1999 Apr 29 13
BC Components Product specification
Metallized polyester film capacitors MKT 468
MKT 468 GENERAL DATA PITCH 15/22.5 mm; PITCH 7.5 mm (bent back leads)
Specific reference data for the 100 V DC capacitors
Available 100 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. Length of long leads: lt= 19.0 ±4.0 mm for lead pitch = 15.0 mm and 25.0 ±4.0 mm for lead pitch = 22.5 mm.
3. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter
“Packaging
information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz
Tangent of loss angle:
C≤10.0 µF≤75 ×10−4≤120 ×10−4
Rated voltage pulse slope (dU/dt)R at 100 V (DC):
lmax =17.5 mm 20 V/µs
lmax =26.0 mm 10 V/µs
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute
Withstanding (DC) voltage between leads and case 200 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 468 04... preferred
±5% 2222 468 05... preferred
long leads; note 2 ±10% 2222 468 51... on request
±5% 2222 468 52... on request
Taped on reel H =16.0 mm; P0=12.7 mm; note 3 ±10% 2222 468 06... on request
±5% 2222 468 07... on request
Taped on reel
(bent back) H=16.0 mm; P0=15.0 mm; note 3 ±10% 2222 468 61... preferred
±5% 2222 468 62... preferred
Fig.8 Outline.
handbook, full pagewidth
seating plane(1)
PØdt
b
l
h
lt
α
A
(2)
b
h'
l
CBA818
F'
F
(3)
10 ∅dt
H
15
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) F−F’<0.3 mm.; F =7.5 +0.6/−0.1 mm.
1999 Apr 29 14
BC Components Product specification
Metallized polyester film capacitors MKT 468
URdc =100 V; URac =63 V
Notes
1. Dimensions in brackets for bent back leads.
2. H =in-tape height;P0=sprocket hole distance; for detailed specifications refer to this handbook, chapter
“Packaging
information”
.
a) For pitch =15.0 mm: H =16.0 mm and P0=12.7 mm.
b) For pitch =15/7.5 mm (bent back): H =16.0 mm and P0=15.0 mm.
Standard reel diameter =500 mm. Small reel diameter =356 mm is available on request.
3. The shading indicates preferred types.
C
(µF)
DIMENSIONS(1)
bmax ×h (h’)max ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX REEL DIAMETER =500 mm;
H=16.0 mm; P0=mm(2)
short leads pitch 7.5 mm (bent back)
C-tol =±10% C-tol =±5% C-tol =±10% C-tol =±5%
catalogue number(3) last 5 digits(3) last 5 digits(3)
Pitch =15.0 ±0.4 mm (pitch =7.5 ±0.4 mm for bent back leads); dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
1.2 5.5 ×14.5 (16.0) ×17.5 0.7 2222 468 04125 .. 05125 .. 61125 .. 62125
1.5 6.0 ×15.0 (16.5) ×17.5 0.9 2222 468 04155 .. 05155 .. 61155 .. 62155
1.8 6.5 ×15.5 (17.0) ×17.5 1.0 2222 468 04185 .. 05185 .. 61185 .. 62185
2.2 7.0 ×16.0 (17.5) ×17.5 1.2 2222 468 04225 .. 05225 .. 61225 .. 62225
2.7 8.0 ×17.0 (18.5) ×17.5 1.4 2222 468 04275 .. 05275 .. 61275 .. 62275
3.3 8.5 ×17.5 (19.0) ×17.5 1.5 2222 468 04335 .. 05335 .. 61335 .. 62335
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
3.9 6.5 ×18.5 ×26.0 2.8 2222 468 04395 .. 05395
not available
4.7 7.0 ×19.5 ×26.0 3.2 2222 468 04475 .. 05475
5.6 7.5 ×20.0 ×26.0 3.5 2222 468 04565 .. 05565
6.8 8.5 ×21.5 ×26.0 4.1 2222 468 04685 .. 05685
8.2 9.5 ×22.5 ×26.0 4.8 2222 468 04825 .. 05825
10.0 10.5 ×23.5 ×26.0 5.5 2222 468 04106 .. 05106
1999 Apr 29 15
BC Components Product specification
Metallized polyester film capacitors MKT 468
MKT 468 GENERAL DATA PITCH 15/22.5/27.5 mm; PITCH 7.5 mm (bent back leads)
Specific reference data for the 250 V DC capacitors
Available 250 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
; taped on reel pitch = 27.5 mm is not available.
2. Length of long leads: lt= 19.0 ±4.0 mm for lead pitch = 15.0 mm, 25.0±4.0 mm for lead pitch = 22.5 mm and
24.0 ±4.0 mm for lead pitch = 27.5 mm.
3. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter
“Packaging
information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.47 µF≤75 ×10−4≤120 ×10−4≤225 ×10−4
C>0.47 µF≤75 ×10−4≤120 ×10−4−
Rated voltage pulse slope (dU/dt)R at 250 V (DC):
lmax =17.5 mm 45 V/µs
lmax =26.0 mm 20 V/µs
lmax =30.0 mm 15 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >10000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (DC) voltage between leads and case 500 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 468 16... preferred
±5% 2222 468 17... preferred
long leads; note 2 ±10% 2222 468 53... on request
±5% 2222 468 54... on request
Taped on reel H =16.0 mm; P0=12.7 mm; note 3 ±10% 2222 468 18... on request
±5% 2222 468 19... on request
Taped on reel
(bent back) H=16.0 mm; P0=15.0 mm; note 3 ±10% 2222 468 63... preferred
±5% 2222 468 64... preferred
Fig.9 Outline.
handbook, full pagewidth
seating plane
(1)
PØdt
b
l
h
l
t
α
A
(2)
b
h'
l
CBA818
F'
F
(3)
10 ∅d
t
H
15
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) F−F’<0.3 mm.; F =7.5 +0.6/−0.1 mm.
1999 Apr 29 16
BC Components Product specification
Metallized polyester film capacitors MKT 468
URdc =250 V; URac =160 V
Notes
1. Dimensions in brackets for bent back leads.
2. H =in-tape height;P0=sprocket hole distance; for detailed specifications refer to this handbook, chapter
“Packaging
information”
.
a) For pitch =15.0 mm: H =16.0 mm and P0=12.7 mm.
b) For pitch =15/7.5 mm (bent back): H =16.0 mm and P0=15.0 mm.
Standard reel diameter =500 mm. Small reel diameter =356 mm is available on request.
3. The shading indicates preferred types.
C
(µF)
DIMENSIONS(1)
bmax ×h (h’)max ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX REEL DIAMETER =500 mm;
H=16.0 mm; P0=15.0 mm(2)
short leads pitch 7.5 mm (bent back)
C-tol =±10% C-tol =±5% C-tol =±10% C-tol =±5%
catalogue number(3) last 5 digits(3) last 5 digits(3)
Pitch =15.0 ±0.4 mm (pitch =7.5 ±0.4 mm for bent back leads); dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.27 5.0 ×14.0 (15.5) ×17.5 0.6 2222 468 16274 .. 17274 .. 63274 .. 64274
0.33 5.5 ×14.5 (16.0) ×17.5 0.7 2222 468 16334 .. 17334 .. 63334 .. 64334
0.39 6.0 ×15.0 (16.5) ×17.5 0.9 2222 468 16394 .. 17394 .. 63394 .. 64394
0.47 6.5 ×15.5 (17.0) ×17.5 1.0 2222 468 16474 .. 17474 .. 63474 .. 64474
0.56 7.5 ×16.5 (18.0) ×17.5 1.3 2222 468 16564 .. 17564 .. 63564 .. 64564
0.68 8.0 ×17.0 (18.5) ×17.5 1.4 2222 468 16684 .. 17684 .. 63684 .. 64684
0.82 8.5 ×17.5 (19.0) ×17.5 1.5 2222 468 16824 .. 17824 .. 63824 .. 64824
1.0 8.0 ×20.0 (21.5) ×17.5 1.7 2222 468 16105 .. 17105 .. 63105 .. 64105
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
1.2 7.0 ×19.0 ×26.0 3.2 2222 468 16125 .. 17125 .. 63125 .. 64125
1.5 8.0 ×21.0 ×26.0 3.8 2222 468 16155 .. 17155 .. 63155 .. 64155
1.8 9.0 ×22.0 ×26.0 4.1 2222 468 16185 .. 17185 .. 63185 .. 64185
2.2 10.0 ×23.0 ×26.0 4.8 2222 468 16225 .. 17225 .. 63225 .. 64225
2.7 11.0 ×24.0 ×26.0 5.9 2222 468 16275 .. 17275 .. 63275 .. 64275
3.3 12.5 ×25.5 ×26.0 6.9 2222 468 16335 .. 17335 .. 63335 .. 64335
3.9 13.5 ×26.5 ×26.0 7.5 2222 468 16395 .. 17395 .. 63395 .. 64395
4.7 15.0 ×28.0 ×26.0 8.6 2222 468 16475 .. 17475 .. 63475 .. 64475
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
5.6 15.0 ×28.0 ×30.0 9.1 2222 468 16565 .. 17565 .. 63565 .. 64565
1999 Apr 29 17
BC Components Product specification
Metallized polyester film capacitors MKT 468
MKT 468 GENERAL DATA PITCH 15/22.5/27.5 mm; PITCH 7.5 mm (bent back leads)
Specific reference data for the 400 V DC capacitors
Available 400 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
; taped on reel pitch = 27.5 mm is not available.
2. Length of long leads: lt= 19.0 ±4.0 mm for lead pitch = 15.0 mm, 25.0 ±4.0 mm for lead pitch = 22.5 mm and
24.0 ±4.0 mm for lead pitch = 27.5 mm.
3. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter
“Packaging
information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
0.12 <C≤0.47 µF≤75 ×10−4≤120 ×10−4≤225 ×10−4
C>0.47 µF≤75 ×10−4≤120 ×10−4−
Rated voltage pulse slope (dU/dt)R at 400 V (DC):
lmax =17.5 mm 65 V/µs
lmax =26.0 mm 30 V/µs
lmax =30.0 mm 25 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >10000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (DC) voltage between leads and case 800 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 468 28... preferred
±5% 2222 468 29... preferred
long leads; note 2 ±10% 2222 468 55... on request
±5% 2222 468 56... on request
Taped on reel H =16.0 mm; P0=12.7 mm; note 3 ±10% 2222 468 30... on request
±5% 2222 468 31... on request
Taped on reel
(bent back) H=16.0 mm; P0=15.0 mm; note 3 ±10% 2222 468 65... preferred
±5% 2222 468 66... preferred
handbook, full pagewidth
seating plane
(1)
PØdt
b
l
h
l
t
α
A
(2)
b
h'
l
CBA818
F'
F
(3)
10 ∅d
t
H
15
Fig.10 Outline.
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) F−F’<0.3 mm.; F =7.5 +0.6/−0.1 mm.
1999 Apr 29 18
BC Components Product specification
Metallized polyester film capacitors MKT 468
URdc =400 V; URac =200 V
Notes
1. Dimensions in brackets for bent back leads.
2. H =in-tape height;P0=sprocket hole distance; for detailed specifications refer to this handbook, chapter
“Packaging
information”
.
a) For pitch =15.0 mm: H =16.0 mm and P0=12.7 mm.
b) For pitch =15/7.5 mm (bent back): H =16.0 mm and P0=15.0 mm.
Standard reel diameter =500 mm. Small reel diameter =356 mm is available on request.
3. The shading indicates preferred types.
C
(µF)
DIMENSIONS(1)
bmax ×h (h’)max ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX REEL DIAMETER =500 mm;
H=16.0 mm; P0=15.0 mm(2)
short leads pitch 7.5 mm (bent back)
C-tol =±10% C-tol =±5% C-tol =±10% C-tol =±5%
catalogue number(3) last 5 digits(3) last 5 digits(3)
Pitch =15.0 ±0.4 mm (pitch =7.5 ±0.4 mm for bent back leads); dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.12 5.0 ×14.0 (15.5) ×17.5 0.6 2222 468 28124 .. 29124 .. 65124 .. 66124
0.15 6.0 ×15.0 (16.5) ×17.5 0.9 2222 468 28154 .. 29154 .. 65154 .. 66154
0.18 6.5 ×15.5 (17.0) ×17.5 1.0 2222 468 28184 .. 29184 .. 65184 .. 66184
0.22 7.0 ×16.0 (17.5) ×17.5 1.2 2222 468 28224 .. 29224 .. 65224 .. 66224
0.27 7.5 ×16.5 (18.0) ×17.5 1.3 2222 468 28274 .. 29274 .. 65274 .. 66274
0.33 8.5 ×17.5 (19.0) ×17.5 1.5 2222 468 28334 .. 29334 .. 65334 .. 66334
0.39 7.5 ×19.5 (21.0) ×17.5 1.3 2222 468 28394 .. 29394 .. 65394 .. 66394
0.47 8.5 ×20.5 (22.0) ×17.5 1.5 2222 468 28474 .. 29474 .. 65474 .. 66474
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.56 7.5 ×19.5 ×26.0 3.2 2222 468 28564 .. 29564 .. 65564 .. 66564
0.68 8.0 ×21.0 ×26.0 3.8 2222 468 28684 .. 29684 .. 65684 .. 66684
0.82 9.0 ×22.0 ×26.0 4.5 2222 468 28824 .. 29824 .. 65824 .. 66824
1.0 10.0 ×23.0 ×26.0 5.2 2222 468 28105 .. 29105 .. 65105 .. 66105
1.2 11.0 ×24.0 ×26.0 5.9 2222 468 28125 .. 29125 .. 65125 .. 66125
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
1.5 11.5 ×24.5 ×30.0 6.5 2222 468 28155 .. 29155 .. 65155 .. 66155
1.8 12.5 ×25.5 ×30.0 7.1 2222 468 28185 .. 29185 .. 65185 .. 66185
2.2 14.0 ×27.0 ×30.0 8.2 2222 468 28225 .. 29225 .. 65225 .. 66225
1999 Apr 29 19
BC Components Product specification
Metallized polyester film capacitors MKT 468
MKT 468 GENERAL DATA PITCH 15/22.5/27.5 mm; PITCH 7.5 mm (bent back leads)
Specific reference data for the 630 V DC capacitors
Available 630 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
; taped on reel pitch = 27.5 mm is not available.
2. Length of long leads: lt= 19.0 ±4.0 mm for lead pitch = 15.0 mm, 25.0 ±4.0 mm for lead pitch = 22.5 mm and
24.0 ±4.0 mm for lead pitch = 27.5 mm.
3. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter
“Packaging
information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10−4≤120 ×10−4≤200 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤120 ×10−4≤225 ×10−4
C>0.47 µF≤75 ×10−4≤120 ×10−4−
Rated voltage pulse slope (dU/dt)R at 630 V (DC):
lmax =17.5 mm 90 V/µs
lmax =26.0 mm 35 V/µs
lmax =30.0 mm 30 V/µs
R between leads, for C ≤0.33 µF at 500 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 500 V; 1 minute >10000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute
Withstanding (DC) voltage between leads and case 1260 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 468 40... preferred
±5% 2222 468 41... preferred
long leads; note 2 ±10% 2222 468 57... on request
±5% 2222 468 58... on request
Taped on reel H =16.0 mm; P0=12.7 mm; note 3 ±10% 2222 468 42... on request
±5% 2222 468 43... on request
Taped on reel
(bent back) H=16.0 mm; P0=15.0 mm; note 3 ±10% 2222 468 67... preferred
±5% 2222 468 68... preferred
Fig.11 Outline.
handbook, full pagewidth
seating plane
(1)
PØdt
b
l
h
l
t
α
A
(2)
b
h'
l
CBA818
F'
F
(3)
10 ∅d
t
H
15
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) F−F’<0.3 mm.; F =7.5 +0.6/−0.1 mm
1999 Apr 29 20
BC Components Product specification
Metallized polyester film capacitors MKT 468
URdc =630 V; URac =250 V
Notes
1. Dimensions in brackets for bent back leads.
2. H =in-tape height;P0=sprocket hole distance; for detailed specifications refer to this handbook, chapter
“Packaging
information”
.
a) For pitch =15.0 mm: H =16.0 mm and P0=12.7 mm.
b) For pitch =15/7.5 mm (bent back): H =16.0 mm and P0=15.0 mm.
Standard reel diameter =500 mm. Small reel diameter =356 mm is available on request.
3. The shading indicates preferred types.
C
(µF)
DIMENSIONS(1)
bmax ×h (h’)max ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX REEL DIAMETER =500 mm;
H=16.0 mm; P0=15.0 mm(2)
short leads pitch 7.5 mm (bent back)
C-tol =±10% C-tol =±5% C-tol =±10% C-tol =±5%
catalogue number(3) last 5 digits(3) last 5 digits(3)
Pitch =15.0 ±0.4 mm (pitch =7.5 ±0.4 mm for bent back leads); dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.039 5.0 ×14.0 (15.5) ×17.5 0.6 2222 468 40393 .. 41393 .. 67393 .. 68393
0.047 5.5 ×14.5 (16.0) ×17.5 0.7 2222 468 40473 .. 41473 .. 67473 .. 68473
0.056 6.0 ×15.0 (16.5) ×17.5 0.9 2222 468 40563 .. 41563 .. 67563 .. 68563
0.068 7.0 ×16.0 (17.5) ×17.5 1.2 2222 468 40683 .. 41683 .. 67683 .. 68683
0.082 7.5 ×16.5 (18.0) ×17.5 1.3 2222 468 40823 .. 41823 .. 67823 .. 68823
0.1 8.0 ×17.0 (18.5) ×17.5 1.4 2222 468 40104 .. 41104 .. 67104 .. 68104
0.12 7.5 ×19.5 (21.0) ×17.5 1.3 2222 468 40124 .. 41124 .. 67124 .. 68124
0.15 8.5 ×20.5 (22.0) ×17.5 1.5 2222 468 40154 .. 41154 .. 67154 .. 68154
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.18 7.5 ×19.5 ×26.0 3.5 2222 468 40184 .. 41184 .. 67184 .. 68184
0.22 8.0 ×21.0 ×26.0 3.8 2222 468 40224 .. 41224 .. 67224 .. 68224
0.27 9.0 ×22.0 ×26.0 4.5 2222 468 40274 .. 41274 .. 67274 .. 68274
0.33 10.0 ×23.0 ×26.0 5.2 2222 468 40334 .. 41334 .. 67334 .. 68334
0.39 11.0 ×24.0 ×26.0 5.9 2222 468 40394 .. 41394 .. 67394 .. 68394
0.47 12.5 ×25.5 ×26.0 6.9 2222 468 40474 .. 41474 .. 67474 .. 68474
0.56 13.5 ×26.5 ×26.0 7.5 2222 468 40564 .. 41564 .. 67564 .. 68564
0.68 15.0 ×28.0 ×26.0 8.6 2222 468 40684 .. 41684 .. 67684 .. 68684
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.82 15.0 ×28.0 ×30.0 8.8 2222 468 40824 .. 41824 .. 67824 .. 68824
1999 Apr 29 21
BC Components Product specification
Metallized polyester film capacitors MKT/MKT 468
MKT/MKT 468 GENERAL DATA PITCH 27.5 mm
Specific reference data for the 1000 V DC capacitors
Available 1000 V DC versions
Note
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10-4 ≤120 ×10-4 ≤200 ×10-4
0.1 µF<C≤0.22 µF≤75 ×10−4≤120 ×10-4 ≤225 ×10-4
Rated voltage pulse slope (dU/dt)R at 1000 V (DC):
P = 15 mm 200 V/µs
P = 22.5 mm 120 V/µs
P = 27.5 mm 100 V/µs
R between leads, for C ≤0.33 µF at 500 V; 1 minute >30000 MΩ
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1600; 1 minute
Withstanding (DC) voltage between leads and case 2000 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 468 60... preferred
Fig.12 Outline.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
seating plane(1)
CBA266
P
l
lt
h
∅dt
b
A
(2) α
1999 Apr 29 22
BC Components Product specification
Metallized polyester film capacitors MKT/MKT 468
URdc =1000 V; URac =400 V
Note
1. The shading indicates preferred types.
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER(1)
LOOSE IN BOX; lt= 3.5 ±0.5 mm
C-tol =±10%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5+1.4/−0.5 mm
0.015 5.5 ×15.0 ×17.5 0.9 2222 468 60153
0.018 2222 468 60183
0.022 6.0 ×15.0 ×17.5 1.1 2222 468 60223
0.027 6.5 ×15.5 ×17.5 1.4 2222 468 60273
0.033 8.0 ×17.0 ×17.5 1.5 2222 468 60333
0.039 8.5 ×17.5 ×17.5 1.8 2222 468 60393
0.047 9.5 ×18.5 ×17.5 2.5 2222 468 60473
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5+1.4/−0.5 mm
0.056 7.0 ×20.0 ×26.0 3.1 2222 468 60563
0.068 7.5 ×20.5 ×26.0 3.6 2222 468 60683
0.082 8.5 ×21.5 ×26.0 3.9 2222 468 60823
0.1 9.0 ×22.0 ×26.0 4.2 2222 468 60104
0.12 10.0 ×23.0 ×26.0 4.5 2222 468 60124
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5+1.4/−0.5 mm
0.15 10.0 ×23.0 ×30.0 6.5 2222 468 60154
0.18 11.0 ×24.5 ×30.0 7.0 2222 468 60184
0.22 12.0 ×25.5 ×30.0 8.0 2222 468 60224
1999 Apr 29 23
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
CONSTRUCTION
Description
•Low-inductive wound cell of metallized polyethylene
terephthalate film
•Protected by a hard, water repellent, solvent resistant
epoxy lacquer
•Radial leads, copper wire, solder coated.
Fig.13 Construction: MKT
100, 250, 400 and 630 V.
handbook, halfpage
connecting wire
metallized polyester film
metal spray layer
CBA073
Fig.14 Construction: MKT/MKT 1000 V.
handbook, halfpage
metal spray layer
metallized polyester film
connecting wire
CBA229
Mounting
NORMAL USE
The capacitors are designed for mounting on
printed-circuit boards. The capacitors packed in bandoliers
are designed for mounting on printed-circuit boards by
means of automatic insertion machines.
For detailed tape specifications refer to this handbook,
chapter
“Packaging information”
.
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
AND SHOCK
In order to withstand vibration and shock tests, it must be
ensured that the underside of the crimps are in good
contact with the printed-circuit board:
•For pitches ≤15 mm capacitors shall be mechanically
fixed by the leads.
•For larger pitches the capacitors shall be mounted in the
same way and the body clamped.
Storage temperature
•Storage temperature: Tstg =−25 to +40 °C with RH
maximum 80% without condensation.
RATINGS AND CHARACTERISTICS REFERENCE
CONDITIONS
Unless otherwise specified, all electrical values apply to an
ambient free air temperature of 23 ±1°C, an atmospheric
pressure of 86 to 106 kPa and a relative humidity of
50 ±2%.
For reference testing, a conditioning period shall be
applied over 96 ±4 hours by heating the products in a
circulating air oven at the rated temperature and a relative
humidity not exceeding 20%.
1999 Apr 29 24
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
CHARACTERISTICS
Capacitance
Fig.15 Capacitance change as a function of frequency: typical curve.
handbook, full pagewidth
CBA074
−3
2
102103104105
−2
−1
0
f (Hz)
1
∆C
C
(%)
Fig.16 Capacitance as a function of ambient free air temperature, measured at 1 kHz, 1 V.
h
andbook, full pagewidth
CBA922
100−60 − 20 6020
4
2
0
−2
−4
−6
6
max.
min.
Tamb (°C)
typical
400 V - 630 V - 1000 V
250 V
100 V
∆C
C
(%)
1999 Apr 29 25
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
Impedance
Maximum DC and AC voltage as a function of temperature
Fig.17 Impedance as a function of frequency: typical curve.
handbook, full pagewidth
CBA820
103104105106107
103
10−2
10−1
1
10
102
f (Hz)
Impedance
(Ω)
400 V; 390 nF
MKT 467/468
Fig.18 Multiplying factor for DC and AC voltage as a function of temperature.
handbook, full pagewidth
CBA086
1.2
0
0.8
0.4
1.0
0.6
0.2
factor
−60 −20 8040−40 0 20 60 100
Tamb (°C)
1999 Apr 29 26
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
Maximum RMS voltage and AC current (sinewave) as a function of frequency
Fig.19 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =100 V.
handbook, full pagewidth
AC voltage
(V)
f (Hz)
CBA809
102103104105106
102
10
1
MKT 467/468
10 µF (lmax = 26.0 mm)
1 µF (lmax = 12.5 mm)
1.5 µF (lmax = 17.5 mm)
3.9 µF (lmax = 26.0 mm)
Fig.20 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤100 °C for URdc =100 V.
handbook, full pagewidth
AC voltage
(V)
f (Hz)
CBA810
10 102103104105
102
10
1
MKT 467/468
10 µF (lmax = 26.0 mm)
1.5 µF (lmax = 17.5 mm)
3.9 µF (lmax = 26.0 mm)
1 µF (lmax = 12.5 mm)
1999 Apr 29 27
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
Fig.21 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =250 V.
handbook, full pagewidth
AC voltage
(V)
f (Hz)
CBA811
10 102103104105106
103
102
10
1
220 nF (lmax = 12.5 mm)
5.6 µF (lmax = 30.0 mm)
2.2 µF (lmax = 26.0 mm)
MKT 467/468
Fig.22 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤100 °C for URdc =250 V.
handbook, full pagewidth
AC voltage
(V)
f (Hz)
CBA812
10 102103104105106
103
102
10
1
MKT 467/468
220 nF (lmax = 12.5 mm)
2.2 µF (lmax = 26.0 mm)
5.6 µF (lmax = 30.0 mm)
1999 Apr 29 28
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
Fig.23 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =400 V.
handbook, full pagewidth
AC voltage
(V)
f (Hz)
CBA813
10 102103104105106
103
102
10
1
2.2 µF (lmax = 30.0 mm)
MKT 467/468
100 nF (lmax = 12.5 mm)
220 nF (lmax = 17.5 mm)
1.0 µF (lmax = 26.0 mm)
Fig.24 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤100 °C for URdc =400 V.
handbook, full pagewidth
AC voltage
(V)
f (Hz)
CBA814
10 102103104105106
103
102
10
1
2.2 µF (lmax = 30.0 mm)
MKT 467/468
100 nF (lmax = 12.5 mm)
220 nF (lmax = 17.5 mm)
1.0 µF (lmax = 26.0 mm)
1999 Apr 29 29
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
Fig.25 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =630 V.
handbook, full pagewidth
AC voltage
(V)
f (Hz)
CBA815
10 102103104105106
103
102
10
1
10 nF (lmax = 12.5 mm)
820 nF (lmax = 30.0 mm)
MKT 467/468
470 nF (lmax = 26.0 mm)
220 nF (lmax = 26.0 mm)
100 nF (lmax = 17.5 mm)
Fig.26 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤100 °C for URdc =630 V.
handbook, full pagewidth
AC voltage
(V)
f (Hz)
CBA816
10 102103104105106
103
102
10
1
10 nF (lmax = 12.5 mm)
820 nF (lmax = 30.0 mm)
100 nF (lmax = 17.5 mm)
220 nF (lmax = 26.0 mm)
470 nF (lmax = 26.0 mm)
MKT 467/468
1999 Apr 29 30
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
Maximum RMS current (sinewave) as a function of frequency
The maximum RMS current is defined by .
U
ac
is the maximum AC voltage depending on the ambient temperature in Figs 19 to 28.
Fig.27 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =1000 V.
handbook, full pagewidth
AC voltage
(V)
f (Hz)
CBA817
10 102103104105106
103
102
10
1
220 nF
MKT/MKT 468
Fig.28 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤100 °C for URdc =1000 V.
handbook, full pagewidth
AC voltage
(V)
f (Hz)
CBA950
10 102103104105106
103
102
10
1
220 nF
MKT/MKT 468
Iac ωCU
ac
××=
1999 Apr 29 31
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
Tangent of loss angle
Insulation resistance
Fig.29 Tangent of loss angle as a function of frequency: typical curve.
handbook, full pagewidth
102103104105
103
10
102
dissipation
factor
(× 10−4)
f (Hz)
CBA087
Fig.30 RC product as a function of ambient free air temperature: typical curve.
CBA088
100−50 0 50
105
102
104
103
RC
(s)
Tamb (°C)
1999 Apr 29 32
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
Maximum allowed component temperature rise (∆T) as a function of the ambient temperature (Tamb)
Fig.31 Maximum allowed component temperature rise as a function of the ambient temperature.
handbook, full pagewidth
CBA821
20
15
0
−60 −20 80
10
5
40
−40 0 20 60 100
Tamb (°C)
∆T
(°C)
1999 Apr 29 33
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/°C
Table 1 Heat conductivity
Power dissipation and maximum component temperature rise
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a
function of the free air ambient temperature.
Power dissipation can be calculated in accordance with Chapter
“Introduction”
section,
“Maximum power dissipation”
.
The component temperature rise (∆T) can be measured (see section “Measuring the component temperature” for more
details) or calculated by :
•∆T=component temperature rise (°C).
•P=power dissipation of the component (mW).
•G=heat conductivity of the component (mW/°C).
bmax
(mm)
ORIGINAL PITCH
(mm)
10 15 22.5 27.5
4.0 4.0 5.0 −−
4.5 4.5 6.0 −−
5.0 5.0 6.0 12.0 13.0
5.5 6.0 6.5 13.0 15.0
6.0 6.0 6.5 13.0 15.0
6.5 6.5 8.0 15.0 17.0
7.0 −8.0 15.0 17.0
7.5 −9.0 17.0 18.0
8.0 −9.0 17.0 20.0
8.5 −11.0 18.0 20.0
9.0 −11.0 18.0 22.0
9.5 −12.0 20.0 22.0
10.0 −12.0 20.0 23.0
10.5 −−22.0 25.0
11.0 −−−25.0
11.5 −−−27.0
12.0 −−−27.0
12.5 −−−30.0
13.0 −−−30.0
13.5 −−−30.0
14.0 −−−30.0
14.5 −−−33.0
15.0 −−−33.0
15.5 −−−37.0
16.0 −−−37.0
∆TPG⁄=
1999 Apr 29 34
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
Measuring the component temperature
A thermocouple must be attached to the capacitor body as in Fig.32.
The temperature is measured in unloaded (Tamb) and maximum loaded
condition (Tc).
The temperature rise is given by .
To avoid radiation or convection, the capacitor should be tested in a wind-free
box.
Fig.32 Mounting the thermocouple.
handbook, halfpage
thermocouple
CBA771
∆TT
c
T
amb
–=
1999 Apr 29 35
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
Application note and limiting conditions
These capacitors are not suitable for mains applications as across-the-line capacitors without additional
protection, as described below. These mains applications are strictly regulated for safety standards and
therefore electromagnetic interference suppression capacitors conforming to the standards must be used.
To select the capacitor for a certain application, the following conditions must be checked:
1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc).
2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level.
3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and
without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied
by URdc and divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T is the pulse duration.
The rated voltage pulse slope is valid for ambient temperatures up to 85 °C. For higher temperatures a derating factor
of 3% per K shall be applied.
4. The maximum component surface temperature rise must be lower than the limits in Fig.31.
5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a
capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to
100 times the values mentioned in Table 1.
6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series
connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any
case (spikes and surge voltages from the mains included):
VOLTAGE CONDITIONS FOR 6ABOVE
ALLOWED VOLTAGES Tamb ≤85 °C85°C<T
amb ≤100 °C
Maximum continuous RMS voltage URac 0.8 ×URac
Maximum temporary RMS -overvoltage (<24 hours) 1.25 ×URac 1.0 ×URac
Maximum peak voltage (Vo-p) (<2 s) 1.6 ×URdc 1.3 ×URdc
2dU
dt
--------
2
0
T
∫dt×× URdc dU
dt
--------
rated
×<
1999 Apr 29 36
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
Example
C=3300 nF - 100 V used for the voltage signal shown in Fig.33.
Up-p =80 V; Up=70 V; T1=0.5 ms; T2=1 ms.
The ambient temperature is 35 °C.
Checking the conditions:
1. The peak voltage Up=70 V is lower than 100 V (DC).
2. The peak-to-peak voltage 80 V is lower than .
3. The voltage pulse slope dU/dt =80 V/500 µs=0.16 V/ µs.
This is lower than 20 V/µs (see specific reference data for each version).
4. The dissipated power is 60 mW as calculated with Fourier terms.
The temperature rise for bmax =8.5 mm and pitch =15 mm will be .
This is lower than 15 °C temperature rise at 35 °C; see Fig.31.
5. Not applicable.
6. Not applicable.
2 2 63 V (AC)×× 178 Upp–
=
60 mW
11 mW °C⁄
------------------------------- 5.5 °C=
Fig.33 Voltage signal.
handbook, full pagewidth
time
voltage
CBA865
T1
T2
Up
Up-p
1999 Apr 29 37
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
MARKING
Product marking
STYLE MKT 467/468
Capacitors with original pitch
=
10 mm
The capacitors are marked on the top in black ink
(see Fig.34) with the following information:
1. Capacitance code in accordance with
“IEC 60062”
2. Tolerance on rated capacitance: K =±10%; J =±5%
3. Rated voltage (DC). Fig.34 Example of marking for a capacitor with
original pitch =10 mm.
handbook, halfpage
470n K 100
CBA109
Capacitors with original pitch
=
15, 22.5 and 27.5 mm
The capacitors are marked on the top in black ink
(see Fig.35) with the following information:
1. Manufacturer’s symbol
2. Capacitance code in accordance with
“IEC 60062”
3. Tolerance on rated capacitance: K =±10%; J =±5%
4. Rated voltage (DC).
Fig.35 Example of marking for a capacitor with
original pitch =15, 22.5 and 27.5 mm.
handbook, halfpage
PHILIPS
820n J 100
CBA110
STYLE MKT/MKT 468
The capacitors are marked on the top in black ink
(see Fig.36) with the following information:
1. Capacitance code in accordance with
“IEC 60062”
2. Tolerance on rated capacitance: K =±10%; J =±5%
3. Rated voltage (DC)
4. Code for dielectric material (MKT/MKT)
5. Manufacturer’s symbol.
Fig.36 Example of marking.
handbook, halfpage
PHILIPS
180n J 1000
MKT/MKT468 6
CBA651
1999 Apr 29 38
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
Package marking
The package containing the capacitors is marked as shown in Fig.37.
handbook, full pagewidth
CCA338
1.
2.
3.
4.
5.
8.
7.
6.
9.
10.
Fig.37 Barcode label.
Barcode label marking
LINE MARKING EXPLANATION
1 Manufacturer's name
2 Country of origin
3 Sub-family
4 Type description
5 Capacitance value, tolerance, voltage and
climatic category
(“IEC 60068-1”)
6 Batchnumber (only for capacitors from PRC)
7•Country of origin: Belgium
Preference origin code: A
Country of origin in code: 170 (Belgium)
Responsible production centre: HQ
Work order: WO
•Country of origin: China
Preference origin code: N
Country of origin in code: 260 (PRC)
Responsible production centre: 07
8 Product type description
9 Quantity and production period, year and week
code
10 Product code (12NC)
Please note:
In due time BC COMPONENTS
will replace PHILIPS COMPONENTS
1999 Apr 29 39
BC Components Product specification
Metallized polyester film capacitors MKT 467/468
MKT/MKT 468
QUICK REFERENCE TEST REQUIREMENTS (see note 1)
Notes
1. For detailed information, see
“Type detail specification HQN-384-02/102”
.
2. Measuring frequency 10 kHz.
TEST PROCEDURE
(quick reference) REQUIREMENTS
Robustness of leads
Tensile:
“IEC 60068-2-21”
load 10 N; 10 s
no visible damage
legible marking
∆C/C≤2%
∆tan δ≤30 ×10−4; note 2
Bending:
“IEC 60068-2-21”
load 5 N; 4 ×90°
Resistance to soldering heat
“IEC 60068-2-20”
solder bath: 260 °C; 10 s
Resistance to solvents isopropyl alcohol; 23 °C; 5 minutes
Robustness of component
Vibration:
“IEC 60068-2-6”
10 to 55 Hz; amplitude 0.75 mm or
acceleration 98 m/s2; 6 hours ∆C/C≤3%
∆tan δ≤30 ×10−4; note 2
Shock:
“IEC 60068-2-27”
half sinewave; 490 m/s2; 11 ms
Climatic sequence
Dry heat:
“IEC 60068-2-2”
16 hours; 100 °C
∆C/C≤5%
∆tan δ≤50 ×10−4; note 2
Rins ≥50% of specified value
Damp heat cyclic, test Db, first cycle:
“IEC 60068-2-30”
Cold:
“IEC 60068-2-1”
2 hours; −55 °C
Damp heat cyclic, test Db,
remaining cycles:
“IEC 60068-2-30”
Other applicable tests
Damp heat, steady state:
“IEC 60068-2-3”
56 days; 40 °C; 90 to 95% RH ∆C/C≤5%
∆tan δ≤50 ×10−4; note 2
Rins ≥50% of specified value
Endurance (DC):
“IEC 60384-2”
2000 hours:
1.25 ×URdc; 85 °C
1×URdc; 100 °C
∆C/C≤5%
∆tan δ≤30 ×10−4; note 2
Rins ≥50% of specified value
Heat storage:
“IEC 60384-2”
2000 hours; 100 °C∆C/C≤3%
∆tan δ≤30 ×10−4; note 2
Resistance to soldering heat
with preheating:
“IEC 60384-2”
body temperature: 100 °C;
bath temperature: 260 °C;
dwell time: 10 s
∆C/C≤2% (C ≤10 nF)
∆C/C≤1% (C >10 nF)
∆tan δ≤30 ×10−4; note 2
