www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
B-38
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
Dimensions in inches (millimeters) and are subject to change without notice.
AS85049
B
AS85049/18
Straight EMI/RFI Environmental Backshell
TABLE I: Shell Size,
Thread and Dimensions
Shell
Size A Thread
Class 2B B Dia
Max
9 M12 X 1 - 6H .750 (19.1)
11 M15 X 1 - 6H .850 (21.6)
13 M18 X 1 - 6H 1.000 (25.4)
15 M22 X 1 - 6H 1.150 (29.2)
17 M25 X 1 - 6H 1.250 (31.8)
19 M28 X 1 - 6H 1.400 (35.6)
21 M31 X 1 - 6H 1.550 (39.4)
23 M34 X 1 - 6H 1.650 (41.9)
25 M37 X 1 - 6H 1.850 (47.0)
TABLE II:
Shell Size and
Clamp Size
Shell
Size Clamp Size
Min Max
9 01 02
11 01 03
13 02 04
15 02 05
17 02 06
19 03 07
21 03 08
23 03 09
25 04 10
APPLICATION NOTES
1. For complete dimensions
see the applicable Military
Speciîš¿cation.
2. Metric dimensions (mm) are in
parentheses.
3. Cable Range is deîš¿ned as
the accommodation range
for the wire bundle or cable.
Dimensions shown are not
intended for inspection criteria.
TABLE III: Clamp Size, Cable Range and Dimensions
Clamp
Size Cable Range
Min Max E
Max F
Max
01 .062 (1.6) .125 (3.2) .781 (19.8) 1.250 (31.8)
02 .125 (3.2) .250 (6.4) .969 (24.6) 1.250 (31.8)
03 .250 (6.4) .375 (9.5) 1.062 (27.0) 1.250 (31.8)
04 .375 (9.5) .500 (12.7) 1.156 (29.4) 1.250 (31.8)
05 .500 (12.7) .625 (15.9) 1.250 (31.8) 1.312 (33.3)
06 .625 (15.9) .750 (19.1) 1.375 (34.9) 1.375 (34.9)
07 .750 (19.1) .875 (22.2) 1.500 (38.1) 1.500 (38.1)
08 .875 (22.2) 1.000 (25.4) 1.625 (41.3) 1.625 (41.3)
09 1.000 (25.4) 1.125 (28.6) 1.750 (44.5) 1.625 (41.3)
10 1.125 (28.6) 1.250 (31.8) 1.875 (47.6) 1.625 (41.3)
TABLE IV: Length Code
Length
Code Available
Shell Sizes Length
Standard 9 - 25 1.500 (38.1)
A9 - 25 2.500 (63.5)
B9 - 25 3.500 (88.9)
C9 - 25 4.500 (114.3)
CONNECTOR DESIGNATOR:
HMIL-DTL-38999, Series III and IV
EN3645
Basic
Part Number
M85049/18 11 N 03 A
Shell Size
(Table I)
Length Code
(Table IV)
Omit for Standard
Clamp Size
(Table III)
Finish
N = Electroless Nickel X = Aluminum, Nickel Flurocarbon Polymer
W = 1,000 Hr. Cadmium Olive Drab Z = Aluminum, Zinc-Nickel, Black
over Electroless Nickel