www.Amprobe.com
Amprobe® Test Tools
Data Sheet
No hassle
warranty
No waiting.
No shipping
charges.
Our commitment to
high-quality products
and customer service
is demonstrated by
our industry exclusive
“No Hassle” warranty.
In the unlikely event
that an Amprobe Test
Tool requires warranty
service, any of our
local dealers are
authorized to replace
it, on the spot.
TMA10A
Anemometer Thermometer
Anemometer with remote vane
Key features:
Measure CFM by
inputting the vent
dimensions
Obtain air flow average
by taking up to eight
data points
Vane has three foot
cord for measurement
flexibility
Deluxe carrying case
■
■
■
■
Measure air velocity or air flow
RS232 interface output with
optional software and cable, TM-
SWA
Continuous moving average for up
to 2 hours
MIN/MAX/AVG reading on a single
point
Air Velocity average for multiple
points
Data Hold to freeze measurement
display of both readings
Auto power off function
Obtain air flow (CFM) average for
multi-point
The TMA10A is ideal for HVAC/R
technicians measuring Heat/Ventila-
tion/Air conditioning/Refrigeration
wind flow and temperature in resi-
dential, commercial and industrial
air conditioning systems. It offers
numerous functions—use it to check
air velocity FPM (Feet per minute),
air volume (flow) CFM (Cubic feet
per minute) plus the remote vane
allows greater measurement loca-
tion flexibility. Switch between °C
and °F. Input the area of airflow
measurement to gain accurate air
velocity results. Measure an air
flow source for a continuous mov-
ing average for up to two hours.
Determine minimum, maximum and
average readings from a single point
air source.
■
■
■
■
■
■
■
■
TMA10A
Large dual display to view both
air flow or velocity measurement
plus temperature. Long extended
flexible cord for remote vane access
capabilities.
All the TMA10A measurements
can be output to a computer for
charting or analysis by optional
model TM-SWA software and RS232
cable. Shipped in a deluxe hard
carry case to protect and transport
your Anemometer.
N10140
www.Amprobe.com
Amprobe® Test Tools
Data Sheet
©2007 Amprobe Test Tools. All rights reserved.
3/2007 PN: 2124098 Rev C
TMA10A Technical Specifications
General Specifications
Display Dual 4-digit (9999 count) LCD
Operating temperature 32 °F to 122 °F (0 °C to 50 °C)
Operating humidity Max. 80 % RH
Power supply 9 V battery (heavy-duty alkaline)
Battery life 100 hours
Dimensions Main instrument 181 mm x 71 mm x 38 mm (7.1 in x 2.8 in x 1.4 in)
Weight 363 g (0.8 lb) including battery and sensor
Warranty One-year
Measurement Accuracy
Function Range Resolution Accuracy
Air Velocity
m/s (meters per sec) 0.40 m to 25.00 m/s 0.01 m/s ± 2 % of full scale
ft/min (feet per minute) 125 ft to 4900 ft/min 1 ft/min ± 2 % of full scale
Air Flow
CMS (cubic meters per sec) 0.01 m to 99.99 m3/sec 0.01 0 to 9.999 m
CFM (cubic feet per minute) 1 ft to 9999 ft3/min 1.0 0 to 9.999 ft
Air Temperature
°C (°F) 0 °C to 50 °C (32 to 122 °F) 0.1 °C/(°F) ± 0.8 °C (1.5 °F)
Data hold Freezes displayed reading
Sensors Air velocity/flow sensor: Conventional angled vane arms with low friction ball bearing
Temperature sensor Precision thermistor
Sensor head diameter 70 mm
MIN/MAX memory Record and view minimum and maximum readings
Average reading memory Single point (up to 2 hours) or multi-point (up to 8 readings)
Automatic power off Sleep mode (with bypass) after 20 minutes to conserve energy
Measurement Units
Air velocity ft/min (feet per minute); m/s (meters per second)
Air flow CMS (m3/sec) and CFM (ft3/min)
Temperature °C and °F
Included Accessories
TMA10A Anemometer with remote
vane and cord, deluxe hard plastic
carrying case, battery (installed) and
user manual.
Optional Accessories
TM-SWA RS232 Cable and Software
• Record both channels simultaneously
• Store real-time results for further
analysis
• Chart measurements for trends
• View time stamp for event analysis
Amprobe® Test Tools Europe
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
Amprobe® Test Tools
website: www.Amprobe.com
email: info@amprobe.com
6920 Seaway Blvd.
Everett, WA 98203
tel: 877-AMPROBE
