HMC523LC4 v02.1208 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 GaAs MMIC I/Q MIXER 15 - 23 GHz Typical Applications Features The HMC523LC4 is ideal for: Wide IF Bandwidth: DC - 3.5 GHz * Point-to-Point Radios Image Rejection: 25 dB * Point-to-Multi-Point Radios & VSAT LO to RF Isolation: 47 dB * Test Equipment & Sensors High Input IP3: +25 dBm * Military End-Use RoHS Compliant 4x4 mm SMT Package Functional Diagram General Description The HMC523LC4 is a compact general purpose I /Q MMIC mixer in a leadless RoHS compliant SMT package, which can be used as either an Image Reject Mixer or a Single Sideband Upconverter. The mixer utilizes two standard Hittite double balanced mixer cells and a 90 degree hybrid fabricated in a GaAs MESFET process. A low frequency quadrature hybrid was used to produce a 100 MHz USB IF output. This product is a much smaller alternative to hybrid style Image Reject Mixers and Single Sideband Upconverter assemblies. The HMC523LC4 eliminates the need for wire bonding allowing use of surface mount manufacturing techniques. Electrical Specifi cations, TA = +25 C, IF= 100 MHz, LO = +17 dBm* Parameter Min. Frequency Range, RF/LO Frequency Range, IF Max. Min. 8 19 1 dB Compression (Input) 25 Typ. Max. 21 - 23 DC - 3.5 Conversion Loss (As IRM) Image Rejection Typ. 15 - 21 GHz DC - 3.5 10 10 19 +15 GHz 13 dB 25 dB +18 dBm LO to RF Isolation 40 47 40 45 dB LO to IF Isolation 17 22 17 22 dB dBm IP3 (Input) +25 +20 Amplitude Balance 0.3 0.3 dB 4 4 Deg Phase Balance * Unless otherwise noted, all measurements performed as downconverter. 8 - 112 Units For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC523LC4 v02.1208 GaAs MMIC I/Q MIXER 15 - 23 GHz Data Taken As IRM With External IF Hybrid Conversion Gain vs. Temperature Image Rejection vs. Temperature 40 -5 -10 +25C +85C -40C -15 -20 8 30 20 +25C +85C -40C 10 0 13 14 15 16 17 18 19 20 21 22 23 24 13 14 15 16 RF FREQUENCY (GHz) Conversion Gain vs. LO Drive 18 19 20 21 22 23 24 21 22 23 24 21 22 23 24 Return Loss 0 0 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 17 RF FREQUENCY (GHz) -10 +11 dBm +13 dBm +15 dBm +17 dBm +19 dBm -15 -20 RF LO -5 -10 -15 13 14 15 16 17 18 19 20 21 22 23 24 13 14 15 16 RF FREQUENCY (GHz) 17 18 19 20 FREQUENCY (GHz) Input IP3 vs. LO Drive Input P1dB vs. Temperature 30 20 25 20 IP3 (dBm) P1dB (dBm) 16 12 +25C +85C -40C 8 15 10 LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm 4 5 0 13 14 15 16 17 18 19 20 RF FREQUENCY (GHz) 21 22 23 24 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT IMAGE REJECTION (dB) CONVERSION GAIN (dB) 0 0 13 14 15 16 17 18 19 20 RF FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 113 HMC523LC4 v02.1208 GaAs MMIC I/Q MIXER 15 - 23 GHz Quadrature Channel Data Taken Without IF Hybrid Isolations IF Bandwidth 0 -10 RESPONSE (dB) ISOLATION (dB) -5 LO/IF2 -30 LO/IF1 -40 RF/IF1 RETURN LOSS CONVERSION GAIN RF/IF2 -60 13 14 15 16 17 18 19 20 21 22 23 -20 0.5 24 1 1.5 RF FREQUENCY (GHz) Amplitude Balance vs. LO Drive 2.5 3 3.5 Phase Balance vs. LO Drive 2 15 PHASE BALANCE (degrees) AMPLITUDE BALANCE (dB) 2 IF FREQUENCY (GHz) 1 0 LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm -1 -2 10 5 0 -5 LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm -10 -15 13 14 15 16 17 18 19 20 21 22 23 24 13 14 15 16 RF FREQUENCY (GHz) 17 18 19 20 21 22 23 24 23 24 RF FREQUENCY (GHz) Upconverter Performance Conversion Gain vs. LO Drive Upconverter Performance Sideband Rejection vs. LO Drive 0 SIDEBAND REJECTION (dBc) 0 -5 -10 LO = +11 dBm LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm -15 -20 -10 LO = +11 dBm LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm -20 -30 -40 -50 13 14 15 16 17 18 19 20 RF FREQUENCY (GHz) 8 - 114 -10 -15 LO/RF -50 CONVERSION GAIN (dB) MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 -20 21 22 23 24 13 14 15 16 17 18 19 20 21 22 RF FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC523LC4 v02.1208 GaAs MMIC I/Q MIXER 15 - 23 GHz LO Freq. (GHz) MxN Spurious Outputs nLO Spur at RF Port 1 nLO 2 mRF 0 1 2 3 4 15.5 47 51 0 xx -9 29 xx xx 17 49 56 1 34 0 46 61 xx 18.5 50 63 2 87 65 82 62 87 20 47 73 3 xx 87 92 86 90 21.5 50 72 4 xx xx 84 92 92 23 53 71 LO = + 15 dBm Values in dBc below input LO level measured at RF Port. RF = 17.6 GHz @ -10 dBm LO = 17.5 GHz @ +15 dBm Data taken without IF hybrid All values in dBc below IF power level Absolute Maximum Ratings RF / IF Input +20 dBm LO Drive + 27 dBm Channel Temperature 150C Continuous Pdiss (T=85C) (derate 5.22 mW/C above 85C) 340 mW Thermal Resistance (RTH) (junction to package bottom) 191.5 C/W Storage Temperature -65 to +150 C Operating Temperature -55 to +85 C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKLE 3. DIMENSIONS ARE IN INCHES [MILLIMETERS] 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND 7. CLASSIFIED AS A MOISTURE SENSITIVITY LEVEL (MSL) 1. Outline Drawing For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Harmonics of LO 8 - 115 HMC523LC4 v02.1208 GaAs MMIC I/Q MIXER 15 - 23 GHz Pin Descriptions MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 8 - 116 Pin Number Function Description 1, 2, 6-8, 10, 13, 17-24 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 3, 5, 12, 14, 16 GND These pins and package bottom must be connected to RF/DC ground. 4 RF This pin is AC coupled and matched to 50 Ohms from 15 to 23 GHz. 9 IF1 11 IF2 15 LO Interface Schematic This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 3mA of current or part non-function and possible part failure will result. This pin is AC coupled and matched to 50 Ohms from 15 to 23 GHz. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC523LC4 v02.1208 GaAs MMIC I/Q MIXER 15 - 23 GHz Evaluation PCB List of Materials for Evaluation PCB 109998 [1] Item Description J1 - J2 PCB Mount K RF Connector, SRI J3 - J4 PCB Mount SMA Connector, Johnson U1 HMC523LC4 PCB [2] 109996 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 8 - 117