mms A | 22 \ 1 ()/| Features High Speed Programmable Logic Device 15 ns Max Propagation Delay 5 V +10% Operation e Low Power CMOS Operation Speed "L" 15,-20 All Temp Com/Mil.|\Com./MI.| Others lec(mA) | 12/15 | 90/100 55 e CMOS and TTL Compatible Inputs and Outputs 10 1A Leakage Maximum e Reprogrammable - Tested 100% for Programmabllity High Reliability CMOS Technology 2000 V ESD Protection 200 mA Latchup Immunity Full Military, Commercial and Industrial Temperature Ranges * Duakin-Line and Surface Mount Packages Logic Diagram OE PRODUCT TERMS PROGRAMMABLE 12 INTERCONNECT LOGIC 10 INPUT PINS ANO OPTION VO PINS COMBINATORIAL LOGIC ARRAY pronueT (UP To 10 FLIP-FLOPS) > Description The AT22V10 and AT22V10L are CMOS high performance EPROM-based Programmable Logic Devices (PLDs). Speeds down to 15 ns and power dissipation as low as 12 mA are offered. All speed ranges are specified over the full 5 V 10% range. All pins offer a low +10 pA leakage. The AT22V10L provides the optimum low power CMOS PLD solution, with low DC power (8 mA typical) and full CMOS output levels. The AT22V 10L significantly reduces total sys- tem power and enhances system reliability. Full CMOS output levels help reduce power in many other system components. The AT22V10 and AT22V 10L incorporate a variable product term architecture. Each output is allocated from eight to 16 product terms, which allows highly complex logic functions to be realized. Two additional product terms are included to provide synchronous preset and asynchronous reset. These terms are common to all 10 registers. All registers are automatically cleared upon power up. Register preload simplifies testing. A security fuse prevents unauthorized copying of pro- grammed fuse patterns. Pin Configurations Pin Name Function 1 2 3 4 CLK/IN Clock and Logic input 5 IN Logic Inputs vO Bidirectional Buffers 9 . No Internal Connection eee we VCC +5V Supply IN GND IN WO High Speed UV Erasable Programmable Logic DeviceATMEL Absolute Maximum Ratings* *NOTICE: Stresses beyond those listed under Absolute Maxi- : oO 0, Temperature Under Bias................. 65C to +125C mum Ratings may cause permanent damage to the device. AR? 0, This is a stress rating only and functional operation of the de- Storage Temperature... 65C to +150C vice at these or any other conditions beyond those indicated in Voltage on Any Pin with the operational sections of this specification is not implied. Respect to Ground -2.0V to 47.0 vi) Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Voltage on Input Pins . Note: tn Respect to Gr ound (1) |. Minimum voltage is -0.6 V de which may undershoot to -2.0 UFING PTOGFAMMING....srrserssersee, 2.0 V to +14.0V V for pulses of less than 20 ns. Maximum output pin voltage Programming Voltage with is Vec+0.75 V de which may overshoot to +7.0 V for pulses Respect to Ground... -2.0V to +14.0 VI) of less than 20 ns. Integrated UV Erase Dose.............. 7258 W-sec/cm* Logic Options To To 5 Output Output From se Output Output Options OE D> OE From From | Logic vo Logic vo Option Option D.C. and A.C. Operating Conditions Commercial AT22V10/L _ Industrial AT22V10/L. Military AT22V10/L -15, -20, -25 -15, -20, -25 -15, -20, -25, -30 Operating Temperature (Case) 0c - 70C -40C - 85C -55C - 125C Voc Power Supply 5V+10% V+10% 5V+10% 1-64 AT22V10/L muneees AT 22 V1 0/L D.C. Characteristics Symbol! Parameter Condition Min Typ Max Units tu Input Load Current Vin = -0.1 V to Voc+1 V 10 pA ILo Output Leakage Current Vout = -0.1 V to Vcc+0.1 V 10 pA at22v10-15,-20 Com: 90_mA Voc = MAX, Ind., Mil. 100 mA Ioc Power Supply Current uN oy A AT22V10-25,-352) 55 mA pu pe AT22V1 oL2) Com. : 1.7 12 mA Ind., Mil. 2.0 15 mA loca | Glocked Power Supply toutpats Span = MAX, at2ovi0L2) ar 7 me los | Output Short Circult Your = 0.5.V 90 mA ViL Input Low Voltage -0.6 0.8 Vv ViH Input High Voltage 2.0 Vcc+0.75 V lou = 16 mA Com.,ind. 0.5 Vv Vo. | Output Low Votage YIN Or Wile lov=12mA___Mil. 05 Vv lo. = 24 mA Com. 0.8 Vv . Vin=Vin or Vit 1oH = -100 pA Voo-0.3 V Vou Output High Voltage Voc=MIN , lou = -4.0 MA 2.4 Vv Notes: 1. Not more than one output at a time should be shorted. 2. See Icc vs. Frequency curves in the back of this data sheet. Duration of short circuit test should not exceed 30 sec, A.C. Characteristics, Commercial and Industrial AT22V10-15 AT22V10/L-20 AT22V10/L-25 Symbol | Parameter Min Typ Max Min Typ Max Min Typ Max |] Units too [ypu cctored Output 10 15 12 20 15 25] ns tEA Input to Output Enable 10 15 20 15 25 ns ten _ [Input to Output Disable 10 15 20 15 25 ns tcF [Clock to Feedback 0 1 25 0 4 8 0 5 10| ns tco Clock to Output 0 7 10 0 8 12 0 10 15 ns ts Input or Feedback Setup Time 10 8 12 8 15 12 ns tH Hold Time 0 0 0 ns tp Clock Period 12 20 24 ns tw Clock Width 6 10 12 ns External Feedback 1/(ts+tco) 50.0 41.6 33.3 | MHz FMAX | Internal Feedback 1/(ts + tcr) 80.0 50.0 40.0 | MHz No Feedback 1/(te) . 83.3 50.0 41.6 | MHz taw _ | Asynchronous Reset Width 15 8 20 3 25 10 ns Asynchronous Reset, tan | Synchronous Preset, 16 8 20 12 25 15 ns Recovery Time ue [pematronous Reset ao] 52] ta] ae id 1-65A.C. Waveforms INPUTS, 40 Y REG. FEEDBACK SYNCH. PRESET ke 1S cp | ASYNCH. RESET REGISTERED OUTPUTS PD COMBINATORIAL OUTPUTS Note: 1. Timing measurement reference is 1.5 V. Input AC driving levels are 0.0 V and 3.0 V, unless otherwise specified. A.C. Characteristics, Military AT22V10-15 AT22V10/L-20 | AT22V10/L-25 | AT22V10/L-30 Symbol | Parameter Min Typ = Max | Min Typ Max | Min Typ Max | Min Typ Max | Units Input or Feedback to tpo Non-Registered Output 10 15 12 20 15 25 20) 630 ns {EA Input to Output Enabie 10 15 20 15 25 20 30{ ns ter Input to Output Disable 10 15 20 15 25 20 30| ns tor Clock to Feedback 0 1 25{/ 0 4 #+8| 0 5S 10} 0 10 15] ns tco _| Clock to Output 0. 867 10; 0 8&8 15; 0 10 15} 0 12 20] ns tsF Feedback Setup Time 10 8 12 10 15 12 18 15 ns ts Input Setup Time 10. =8 17:14 18 15 20. (15 ns tH Hold Time 0 0 0 0 ns tp Clock Period 12 20 24 30 ns tw Clock Width 6 10 12 15 ns External Feedback 1/(ts+tco) 50.0 31.2 30,3 25.0 | MHz FMAX | Internal Feedback 1/(tsr + tcr) 80.0 50.0 40.0 30.0 | MHz No Feedback 1/{tp) 83.3 50.0 41.6 93.3 | MHz taw | Asynchronous Reset Width | 15 8 20 9 25 10 30. 15 ns Asynchronous Reset tar Recovery Time 15 8 20 12 25 15 30) 18 ns Asynchronous Reset to tap Registered Output Reset 12 20 15 22 18 25 20 630 ns Input Test Waveforms and Output Test Loads: Measurement Levels Commercial Military 3.0V 5.0V 5.0V AC c AC A DRIVING 1.5V MEASUREMENT R=250 2 159382 : OUTPUT OUTPUT LEVELS ov LEVEL PIN PIN R22167 2 (tR, tF<Sns (10% to 90%) 1-66 AT22V10/L T Cl=50pF A2=2489 t CL=50pFees /\ | 22 \ | ()/1 Functional Logic Diagram AT22V10/L INPUT LINES 24 RESET NP, Bir} ad (23,27) (1,2) (22,28) (2.3) (21,25) (3,4) (20,24) (45) (19,23) (5,8) (18,21) {8,7} (17,20) 7.9) (18,19) (8,10) (15,18) (9.11) (14,17) (10,12) SYNCHRONOUS PRESET q11,43) {13,18} AIMEL 167AIMEL Preload of Registered Outputs The registers in the AT22VJO and AT22V10L are provided with circuitry to allow loading of each register asynchronously Level forced on with either a high or a low. This feature will simplify testing registered output pin Register state since any state can be forced into the registers to control test during preload cycle after cycle sequencing. A Vin level on the YO pin will force the register Vin High high; a Vit will force it low, independent of the polarity bit (CO) setting. The preload state is entered by placing an 11.5-V to ViL Low 13- signal on pin 8 on DIPs, and pin 10 on SMPs. When the clock pin is pulsed high, the data on the I/O pins is placed into the ten registers. + tD to 10 1D tO = VH tomin = 100 ns PRELOAD CLOCK REGISTERED ye OUTPUTS OUTPUT PRELOAD ENA. | FORCE I/O'S PRELOAD DATA VOLTAGE PRELOAD OUTPUTS DIS. TOVIHOR VIL CLOCKED IN REMOVED DISABLED Power Up Reset asv 5 ree eT lll The registers in the AT22V10 and AT22V10L are designed to reset during power up. At a point delayed slightly from Vcc POWER crossing 3.8 V, all registers will be reset to the low state. The iPr > output state will depend on the polarity of the output buffer. A is criti ine initializati REGISTERED This feature is critical for state machine initialization. However, OUTPUTS ts due to the asynchronous nature of reset and the uncertainty of how Vcc actually rises in the system, the following conditions are required: w , CLOCK 1) The Vcc rise must be monotonic, 2) After reset occurs, all input and feedback setup times must be met before driving the clock pin high, and Parameter Description Min Typ Max Units 3) The clock must remain stable during tpr. ter Power-Up 600 1000 ns Reset Time Pin Capacitance (f= 1 MHz, T = 25C) Typ Max Units Conditions Cin 5 8 pF Vin = OV CouT 6 8 pF Vout =0V Note: Erasure Characteristics The entire fuse array of an AT22V10 or AT22V10L is erased after exposure to ultraviolet light at a wavelength of 2537 A. Complete erasure is assured after a minimum of 20 minutes ex- posure using 12,000 uWiem? intensity lamps spaced one inch away from the chip. Minimum erase time for lamps at other in- 1-68 1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested. tensity ratings can be calculated from the minimum integrated erasure dose of 15 W-sec/cm. To prevent unintentional era- sure, an opaque label is recommended to cover the clear window on any UV erasable PLD which will be subjected to continuous fluorescent indoor lighting or sunlight. AT22V10/U quemes f\ 122 \ | 0/1 SUPPLY CURRENT vs. INPUT FREQUENCY SUPPLY CURRENT vs. INPUT FREQUENCY AT22V10 (TA = 256, VCC = 5V) AT22V 101 (TA = 250, VCC = 5V) 60. . { c c mM 2 m 2 A A Qo oO 10 2 3 40 6 40 2 30 40 Ea) Frequency (MHz) Frequency (MHz) NORMALIZED SUPPLY CURRENT NORMALIZED ICC vs. AMBIENT TEMP. vs. SUPPLY VOLTAGE 1A t= 90 MHz w it4 " n 12 NN m 4.2 a aL TN P19 ; 4 OB o8 1 os 0.6 40 48 6.o 65 60 65 26 % oe Ld 128 Supply Voltage (V) Ambient Temperature (C) OUTPUT SINK CURRENT OUTPUT SINK CURRENT va. SUPPLY VOLTAGE (VOL = 0.5V) vs. OUTPUT VOLTAGE (TA = 250, VCC = 5V) t t e Pp t t c a me : 1 2 . t t 2a 40 48 5a $5 65 Supply Voltage (V) Output Voltage (V) OUTPUT SOURCE CURRENT OUTPUT SOURCE CURRENT ve. SUPPLY VOLTAGE (VOH = 2.4V) vs. OUTPUT VOLTAGE (TA = 25C, VCC = V) a 6 o u u t t e uo 18 v t t c mal c 90 pI ' ' Ph] t ts : 42 45 80 85 60 Supply Voltage (V) Output Voltage (V) gNORMALIZED TPD vs. SUPPLY VOLTAGE AIMEL 400 Nn m I 4 T P 9 40 45 50 55 60 Supply Voltage (V) NORMALIZED TCO vs. SUPPLY VOLTAGE N 12 aN NX 2 $10 T c o a9 40 45 50 55 80 Supply Voltage (V) NORMALIZED TS vs. SUPPLY VOLTAGE N 1 i T 8 40 45 5.0 55 60 Supply Voltage (V) DELTA TPD vs. OUTPUT LOADING (VGC = 4.5V, OUTPUT LOAD = COMMERCIAL) 12 ' 8 La t 1 4 pam P LL a oo 4 0 100 200 300 Output Load (jig included) Capacitance pF 1-70 OV4 Ben --ePZsoz ON4 sen--s3>50z O4 Qen--sg 702 Oo4 se--80 e3 NORMALIZED TPD vs. TEMPERATURE 13 | a lL Ln | a 07 55 28 6 36 65 95 125 Ambient Temperature (C) NORMALIZED TCO vs. TEMPERATURE "1 71 ad 85 25 96 6 96 128 Ambient Temperature (C) NORMALIZED TS vs. TEMPERATURE a9 09 a 55 -28 36 6s 95 125 Ambient Temperature (C) DELTA TCO vs. OUTPUT LOADING (VCC = 4.5V, OUTPUT LOAD = COMMERCIAL ) 12 0.7 9 0 100 200 300 400 Output Load (jig included) Capacitance pF AT22V10/L ceeees A | 22 \V | 0/L Ordering Information tp ts tco . . (ns) (ns) (ns) Ordering Code Package Operation Range 15 10 10 AT22V10-15DC 24DW3 Commercial AT22V10-15GC 24D3 (0C to 70C) AT22V10-15JC 28J AT22V10-15KC 28KW AT22V10-15LC 28LW AT22V10-15NC 28L AT22V10-15PC 24P3 AT22V10-15SC 24S AT22V10-15D1 24DW3 Industrial AT22V10-15Gl 24D3 (-40C to 85C) AT22V10-15Ji 28J AT22V10-15Kl 28KW AT22V10-15L1 28LW AT22V10-15NI 28L AT22V10-15PI 24P3 AT22V10-15S! 24S AT22V10-15DM 24DW3 Military AT22V10-15GM 24D3 (-55C to 125C) AT22V10-15KM 28KW AT22V10-15LM 28LW AT22V10-15NM 28 AT22V10-15DM/883 24DW3 Military/883C AT22V10-15GM/883 24D3 (-55C to 125C) AT22V10-15KM/883 28KW Class B, Fully Compliant AT22V10-15LM/883 28LW AT22V10-15NM/883 28L 20 12 16 AT22V10-20DC 24DW3 Commercial AT22V10-20GC 24D3 (0C to 70C) AT22V10-20J5C 28J AT22V10-20KC 28KW AT22V10-20LC 28LW AT22V10-20NC 28L AT22V10-20PC 24P3 AT22V10-20SC 24S AT22V10-20D1 24DW3 Industrial AT22V10-20Gl 24D3 (-40C to 85C) AT22V10-20JI 28J AT22V10-20KI 28KW AT22V10-20L1 28LW AT22V10-20NI 28L AT22V10-20PI 24P3 AT22V10-20SI 24S 20 17 15 AT22V10-200M 240W3 Military AT22V10-20GM 2403 (-55C to 125C) AT22V10-20KM 28KW AT22V10-20LM 28Lw AT22V10-20NM 28L. AIMEL VwANNEL Ordering Information (fe) (re) (ns) Ordering Code Package Operation Range 20 17 18 AT22V10-20DM/883 24DW3 Military/883C AT22V10-20GM/883 24D3 (-55C to 125C) AT22V10-20KM/883 28KW Class B, Fully Compliant AT22V10-20LM/883 28Lw AT22V10-20NM/883 28L 25 15 15 AT22V10-25DC 24DW3 Commercial AT22V10-25GC 24D3 (0C to 70C) AT22V10-25JC 28J AT22V10-25KC 28KW AT22V10-25LC 28LW AT22V10-25NC 28L AT22V10-25PC 24P3 AT22V10-25SC 248 AT22V10-25DI 24DW3 Industrial AT22V10-25GI 24D3 (-40C to 85C) AT22V10-25J! 28J AT22V10-25K1 28KW AT22V10-25LI 28Lw AT22V10-25NI 28L AT22V10-25PI 24P3 AT22V10-25SI 24S 25 18 1 AT22V10-25DM 24DW3 Military AT22V10-25GM 2403 (-55C to 125C) AT22V10-25KM 28KW AT22V10-25LM 28Lw AT22V10-25NM 28L AT22V10-25DM/883 24DW3 Military/e83C AT22V10-25GM/883 24D3 (-55C to 125C) AT22V10-25KM/883 28KW Class B, Fully Compliant AT22V10-25LM/883 28LW AT22V10-25NM/883 28L 30 20 20 AT22V10-30DM 24DW3 Military AT22V10-30GM 24D3 (-55C to 125C) AT22V10-30KM 28KW AT22V10-30LM 28Lw AT22V10-30NM 28L AT22V10-30DM/883 24DW3 Military/683C AT22V10-30GM/883 24D3 (-55C to 125C) AT22V10-30KM/883 28KW Class B, Fully Compliant AT22V10-30LM/883 28Lw AT22V10-30NM/883 28L 20 17 15 5962-87539 04 LX 24DW3 Military/883C 5962-87539 04 3X 28Lw (-55C to 125C) Class B, Fully Compliant 25 18 15 5962-87539 01 LX 24DW3 Military/883C 5962-87539 01 3X 28LW (-55C to 125C) Class B, Fully Compliant 1-72 AT22V10/L cumses AT 2 \ 10/1 Ordering Information t t (ns) (re) (ns) Ordering Code Package Operation Range 30 20 20 5962-87539 02 LX 24DW3 Military/883C 5962-87539 02 3X 28Lw (-55C to 125C) Class B, Fully Compliant 15 10 10 5962-88670 05 LX 2403 Military/883C 5962-88670 05 3X 28L (-55C to 125C) Class B, Fully Compliant 20 17 15 5962-88670 04 LX 24D3 Milttary/883C 5962-88670 04 3X 28L (-55C to 125C) Class B, Fully Compiiant 25 18 15 5962-88670 01 LX 24D3 Military/883C 5962-88670 01 3X 28L (-55C to 125C) Class B, Fully Compliant 30 20 20 5962-88670 02 LX 24D3 Military/883C 5962-88670 02 3X 28L (-55C to 125C) Class B, Fully Compliant 1-73AIMmET Ordering Information (he) (re) 9 Ordering Code Package Operation Range 20 12 15 AT22V10L-20DC 24DW3 Commercial AT22V10L-20GC 24D3 (0C to 70C) AT22V10L-20JC 28J AT22V10L-20KC 28KW AT22V10L-20LC 238Lw AT22V10L-20NC 28L AT22V10L-20PC 24P3 AT22V10L-20SC 24S AT22V10L-20DI 24DW3 Industrial AT22V10L-20GI 24D3 {-40C to 85C) AT22V10L-20J) 28J AT22V10L-20KI 28KW AT22V10L-20LI 28Lw AT22V10L-20NI 28L AT22V10L-20PI 24P3 AT22V10L-20S! 24S 20 17 15 AT22V10L-20DM 24DW3 Military AT22V10L-20GM 24D3 (-55C to 125C) AT22V10L-20KM 28KW AT22V10L-20LM 238Lw AT22V10L-20NM 28L. AT22V10L-20DM/883 24DW3 Mitlitary/883C AT22V10L-20GM/883 2403 (-55C to 125C) AT22V10L-20KM/883 28KW Class B, Fully Compliant AT22V10L-20LM/883 28LW AT22V10L-20NM/883 28L 25 15 15 AT22V10L-25DC 24DW3 Commercial AT22V10L-25GC 2403 (0C to 70C) AT22V10L-25JC 28J AT22V10L-25KC 28KW AT22V10L-25LC 28Lw AT22V10L-25NC 28L AT22V10L-25PC 24P3 AT22V10L-25SC 24S AT22V10L-25DI 24DW3 Industrial AT22V10L-25GI 24D3 (-40C to 85C) AT22V10L-25J1 28J AT22V10L-25KI 28KW AT22V10L-25LI 28LW AT22V10L-25NI 28L AT22V10L-25Pl 24P3 AT22V10L-25Sl 24S 25 18 15 AT22V10L-25DM 24DW3 Military AT22V10L-25GM 2403 (-55C to 126C) AT22V10L-25KM 28KW AT22V10L-25LM 28Lw AT22V10L-25NM 28L 1-74 AT22V10/L mummersees fA 122 \ 1 ()/L Ordering Information {PD ts tco . (ns) (ns) (ns) Ordering Code Package Operation Range 25 18 15 AT22V10L-250M/883 24DW3 Military/683C AT22V10L-25GM/883 24D3 (-55C to 125C) AT22V10L-25KM/883 28KW Class B, Fully Compliant AT22V10L-25LM/883 28LW AT22V10L-25NM/883 28L 30 20 20 AT22V10L-30DM 24DW3 Military AT22V10L-30GM 24D3 (-55C to 125C) AT22V10L-30KM 28KW AT22V10L-30LM 28LW AT22V10L-30NM 28L AT22V10L-300M/883 24DW3 Military/883C AT22V10L-30GM/883 24D3 (-55C to 125C) AT22V10L-30KM/883 28KW Class B, Fully Compliant AT22V10L-30LM/883 28LW AT22V10L-30NM/883 28L 20 17 15 5962-88724 04 LX 24DW3 Military/883C 5962-88724 04 3X 28L (-55C to 125C) Class B, Fully Compliant 25 18 15 5962-88724 01 LX 240W3 Military/883C 5962-88724 01 3X 28LW (-55C to 125C) Class B, Fully Compliant 30 20 20 5962-88724 02 LX 24DW3 Military/883C 5962-88724 02 3X 28LW (-55C to 125C) Class B, Fully Compliant 20 17 15 5962-89755 04 LX 24D3 Military/883C 5962-89755 04 3X 28L (-55C to 125C) Class B, Fully Compliant 25 18 15 5962-89755 01 LX 24D3 Military/883C 5962-89755 01 3X 28L (-55C to 125C) Class B, Fully Compliant 30 20 20 5962-89755 02 LX 24D3 Military/683C 5962-89755 02 3X 26L (-55C to 125C) Class B, Fully Compliant Package Type 24DW3 24 Lead, 0.300" Wide, Windowed, Ceramic Dual Inline Package (Cerdip) 2403 24 Lead, 0.300" Wide, Non-Windowed (OTP), Ceramic Dual Inline Package (Cerdip) 28J 28 Lead, Plastic J-Leaded Chip Carrier OTP (PLCC) 28KW 28 Lead, Windowed, Ceramic J-Leaded Chip Carrier (JLCC) 28LWw 28 Pad, Windowed, Ceramic Leadless Chip Carrier (LCC) 28 28 Pad, Non-Windowed, Ceramic Leadiess Chip Carrier OTP (LCC) 24P3 24 Lead, 0.300" Wide, Plastic Dual Inline Package OTP (PDIP) 24S 24 Lead, 0.300" Wide, Plastic Gull Wing Small Outline OTP (SOIC) AIMEL 175