VS-60-70MT..KPbF Series www.vishay.com Vishay Semiconductors Three Phase Bridge (Power Modules), 60/70 A FEATURES * Package fully compatible with the industry standard INT-A-PAK power modules series * High thermal conductivity package, electrically insulated case * Excellent power volume ratio, outline for easy connections to power transistor and IGBT modules * 4000 VRMS isolating voltage * UL E78996 approved MTK * Designed and qualified for industrial level * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS IO 60 A to 70 A VRRM 800 V to 1600 V Package MTK Circuit configuration Three phase bridge DESCRIPTION A range of extremely compact, encapsulated three phase bridge rectifiers offering efficient and reliable operation. They are intended for use in general purpose and heavy duty applications. MAJOR RATINGS AND CHARACTERISTICS VALUES 60MT..K VALUES 70MT..K UNITS 60 (75) 70 (90) A 85 (61) 85 (57) C 50 Hz 420 480 60 Hz 440 500 SYMBOL IO IFSM I2t CHARACTERISTICS TC 50 Hz 870 1150 60 Hz 790 1050 8700 11 500 I2t VRRM TStg TJ Range 800 to 1600 -40 to 150 Range -40 to 150 A kA2s kA2s V C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VS-60MT..K VS-70MT..K VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 80 800 900 100 1000 1100 120 1200 1300 140 1400 1500 160 1600 1700 IRRM MAXIMUM AT TJ MAXIMUM mA 10 Revision: 14-Sep-17 Document Number: 94356 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-60-70MT..KPbF Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL Maximum DC output current at case temperature IO 120 rect. conduction angle t = 10 ms Maximum peak, one-cycle forward, non-repetitive surge current IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t Maximum I2t for fusing No voltage reapplied 100 % VRRM reapplied Initial TJ = TJ maximum 70 (90) A 85 (61) 85 (57) C 420 480 440 500 350 400 370 420 870 1150 1050 610 800 560 730 t = 0.1 ms to 10 ms, no voltage reapplied 8700 11 300 t = 10 ms No voltage reapplied 100 % VRRM reapplied Low level value of threshold voltage VF(TO)1 (16.7 % x x IF(AV) < I < IF(AV)), TJ maximum 0.85 0.86 High level value of threshold voltage VF(TO)2 (I > x IF(AV)), TJ maximum 1.07 1.08 Low level value of forward slope resistance rf1 (16.7 % x x IF(AV) < I < IF(AV)), TJ maximum 8.04 7.35 High level value of forward slope resistance rf2 (I > x IF(AV)), TJ maximum 7.08 6.53 1.75 1.55 Maximum forward voltage drop VFM Ipk = 100 A, TJ = 25 C, tp = 400 s single junction RMS isolation voltage VISOL TJ = 25 C, all terminal shorted f = 50 Hz, t = 1 s UNITS 60 (75) 790 t = 8.3 ms t = 8.3 ms I2t VALUES VALUES 60MT..K 70MT..K TEST CONDITIONS A kA2s A2s V m V 4000 THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction operating and storage temperature range Maximum thermal resistance, junction to case Mounting torque 10 % Approximate weight TJ, TStg RthJC Maximum thermal resistance, case to heatsink per module RthCS to heatsink to terminal TEST CONDITIONS VALUES VALUES 60MT..K 70MT..K UNITS -40 to 150 C DC operation per module 0.37 0.29 DC operation per junction 2.22 1.75 120 rect. conduction angle per module 0.40 0.34 120 rect. conduction angle per junction 2.42 2.01 Mounting surface smooth, flat and greased A mounting compound is recommended and the torque should be rechecked after a period of 3 h to allow for the spread of the compound. Lubricated threads. K/W 0.03 4 to 6 3 to 4 176 Nm g Revision: 14-Sep-17 Document Number: 94356 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-60-70MT..KPbF Series www.vishay.com Vishay Semiconductors Instantaneous Forward Current (A) 150 60MT..K Series Maximum Allowable Case Temperature (C) 140 130 120 120 (Rect) 110 100 90 + 80 ~ 70 - 60 50 0 10 20 30 40 50 60 70 100 TJ = 25 C TJ = 150 C 10 60MT..K Series Per junction 1 0 80 1 2 3 4 5 Total Output Current (A) Instantaneous Forward Voltage (V) Fig. 1 - Current Ratings Characteristics Fig. 2 - Forward Voltage Drop Characteristics 250 50 25 0 125 W 2 K/ W K/ W R - 75 0.5 150 K/ W 100 175 0. K/ 125 0.3 8 150 12 05 175 0. 200 0. 120 (Rect) 225 = 200 SA 60MT..K Series TJ = 150 C 225 R th Maximum Total Power Loss (W) 250 Maximum Total Power Loss (W) 1000 K/W 0.7 K/W 1 K/W 100 75 1.5 K /W 50 25 0 0 10 20 30 40 50 60 70 0 80 25 Total Output Current (A) 50 75 100 125 150 Maximum Allowable Ambient Temperature (C) Fig. 3 - Total Power Loss Characteristics At any rated load condition and with rated VRRM applied following surge. Initial TJ = 150 C at 60 Hz 0.0083 s at 50 Hz 0.0100 s Peak Half Sine Wave Forward Current (A) 350 300 250 200 150 60MT..K Series 450 Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 C No voltage reapplied Rated VRRM reapplied 400 Peak Half Sine Wave Forward Current (A) 400 350 300 250 200 150 100 100 60MT..K Series 50 1 10 100 Number of Equal Amplitude Half Cycle Current Pulses (N) Fig. 4 - Maximum Non-Repetitive Surge Current 0.01 0.1 1.0 Pulse Train Duration (s) Fig. 5 - Maximum Non-Repetitive Surge Current Revision: 14-Sep-17 Document Number: 94356 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-60-70MT..KPbF Series www.vishay.com Instantaneous Forward Current (A) 150 Vishay Semiconductors 70MT..K Series Maximum Allowable Case Temperature (C) 140 130 120 120 (Rect) 110 100 90 + 80 ~ 70 - 60 50 0 20 40 60 80 100 TJ = 25 C 10 TJ = 150 C 70MT..K Series Per junction 1 0 100 1 2 3 4 5 Total Output Current (A) Instantaneous Forward Voltage (V) Fig. 6 - Current Ratings Characteristics Fig. 7 - Forward Voltage Drop Characteristics 300 W R - 150 K/ W 50 0.5 W W K/ 100 0.3 K/ 05 150 200 1 K/ 0. 200 0. 0.2 = 120 (Rect) 250 SA 70MT..K Series TJ = 150 C 250 R th Maximum Total Power Loss (W) 300 Maximum Total Power Loss (W) 1000 K/W 0.7 K/W 1 K/W 100 50 1.5 K /W 0 0 0 10 20 30 40 50 60 70 80 0 90 25 50 75 100 125 150 Maximum Allowable Ambient Temperature (C) Total Output Current (A) Fig. 8 - Total Power Loss Characteristics At any rated load condition and with rated VRRM applied following surge. Initial TJ = 150 C at 60 Hz 0.0083 s at 50 Hz 0.0100 s Peak Half Sine Wave Forward Current (A) 400 350 300 250 200 150 70MT..K Series 500 Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 C No voltage reapplied Rated VRRM reapplied 450 Peak Half Sine Wave Forward Current (A) 450 400 350 300 250 200 150 100 70MT..K Series 100 1 10 100 1 10 100 Number of Equal Amplitude Half Cycle Current Pulses (N) Pulse Train Duration (s) Fig. 9 - Maximum Non-Repetitive Surge Current Fig. 10 - Maximum Non-Repetitive Surge Current Revision: 14-Sep-17 Document Number: 94356 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-60-70MT..KPbF Series ZthJC - Transient Thermal Impedance (K/W) www.vishay.com Vishay Semiconductors 10 Steady state value RthJC = 2.22 K/W 60MT..K Series RthJC = 1.75 K/W 1 (DC operation) 70MT..K Series 0.1 Per junction 0.01 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 11 - Thermal Impedance ZthJC Characteristics ORDERING INFORMATION TABLE Device code VS- 7 0 MT 160 1 2 3 4 5 K PbF 6 1 - Vishay Semiconductors product 2 - Current rating code: 6 = 60 A (average) 7 = 70 A (average) 3 - Three phase diodes bridge 4 - Essential part number 5 - Voltage code x 10 = VRRM (see Voltage Ratings table) 6 - PbF = Lead (Pb)-free Note * To order the optional hardware go to www.vishay.com/doc?95172 CIRCUIT CONFIGURATION + D A B ~ C - E F LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95004 Revision: 14-Sep-17 Document Number: 94356 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors MTK (with and without optional barrier) DIMENSIONS WITH OPTIONAL BARRIERS in millimeters (inches) Fast-on tab 2.8 x 0.8 (type 110) 8.5 0.5 (0.34 0.02) 30 0.5 (1.17 0.02) 24 0.5 (0.94 0.02) 38 0.5 (1.5 0.02) 25.5 0.5 (1.004 0.02) 28 1 (1.11 0.04) Screws M5 x 0.8 length 10 35 0.3 (1.38 0.01) 75 0.5 (2.95 0.02) A 2 3 4 B C 5 6 7 8 O 6.5 0.2 (O 0.26 0.01) 14 0.3 (0.55 0.01) 1 D 18 0.3 (0.71 0.01) 5 0.3 (0.2 0.01) F E 46 0.3 (1.81 0.01) 80 0.3 (3.15 0.01) 94 0.3 (3.7 0.01) Document Number: 95004 Revision: 27-Aug-07 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Outline Dimensions MTK (with and without optional barrier) Vishay Semiconductors DIMENSIONS WITHOUT OPTIONAL BARRIERS in millimeters (inches) Fast-on tab 2.8 x 0.8 (type 110) 24 0.5 (0.94 0.02) 8.5 0.5 (0.34 0.02) 30 0.5 (1.17 0.02) 25.5 0.5 (1.004 0.02) 28 1 (1.11 0.04) Screws M5 x 0.8 length 10 35 0.3 (1.38 0.01) 75 0.5 (2.95 0.02) A 2 3 4 B C 5 6 7 8 O 6.5 0.2 (O 0.26 0.01) 14 0.3 (0.55 0.01) 1 D 18 0.3 (0.71 0.01) 5 0.3 (0.2 0.01) F E 46 0.3 (1.81 0.01) 80 0.3 (3.15 0.01) 94 0.3 (3.7 0.01) www.vishay.com 2 For technical questions, contact: indmodules@vishay.com Document Number: 95004 Revision: 27-Aug-07 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-60MT120KPBF VS-60MT160KPBF VS-70MT120KPBF VS-70MT160KPBF VS-70MT80KPBF VS70MT100KPBF VS-60MT100KPBF VS-60MT80KPBF VS-70MT140KPBF VS-60MT140KPBF