D5100
Industrial Differential Pressure Transducer
D5100 www.meas-spec.com August 2012
1/7
• 316L Stainless Steel Wetted Surface
• Voltage, Current, and mV Outputs
• True Wet/Wet Differential
• CE Certified (amplified version only)
• Variety of Pressure Ports and Electrical
Connections
DESCRIPTION
The D5100 series from Measurement Specialties sets the price and performance standard for
differential pressure transducers used in demanding environments.
The amplified model of the D5100 series exceeds the latest heavy industrial CE requirements including
surge protection and reverse polarity protection. The amplified and mV output pressure transducers both have
two pressure ports for high and low pressures and all wetted parts are made of 316L stainless steel. They come
in a variety of electrical configurations and ranges from 1 to 500 psi (up to 35 Bar).
FEATURES APPLICATIONS
• Heavy Industrial CE Approval (amplified only) • Process Controls
• As Low As ±0.1% Pressure Non Linearity • Tank Level Measurement
• Rugged Construction: Can Withstand 50g
Shock/20g Vibration • Filter Performance Monitoring
• Up to -40°C to +125°C Operating Temperature
Range • Corrosive Fluids and Gas Measurement Systems
• Excellent Stability • Flow Measurements
• Various Output, Pressure Ports and Electrical
Connections
STANDARD RANGES
Range psiD Range BarD
0 to 1 • 0 to 0.07 •
0 to 5 • 0 to 0.35 •
0 to 15 • 0 to 1 •
0 to 30 • 0 to 2 •
0 to 50 • 0 to 3.5 •
0 to 100 • 0 to 7 •
0 to 300 • 0 to 20 •
0 to 500 • 0 to 35 •
D5100
Industrial Differential Pressure Transducer
D5100 www.meas-spec.com August 2012
2/7
PERFORMANCE SPECIFICATIONS (AMPLIFIED OUTPUT)
Typical Drive: See Output Options Table
Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS 1 PSI ≥5 PSI UNITS NOTES
MIN TYP MAX MIN TYP MAX
Accuracy -0.3 0.3 5psi: -0.25 0.25 %Span 1
≥15psi: -0.1 0.1
Isolation, Body To Any Lead 1 1 MΩ @25VDC
Pressure Cycles 1.00E+6 1.00E+6 0-FS Cycles
Proof Pressure (High Side) 10X 3X Rated 2
Proof Pressure (Low Side) 10X 3X Rated 3
Burst Pressure (High Side) 12X 4X Rated 2
Burst Pressure (Low Side) 12X 4X Rated 3
Line (common) Pressure 1000 1000 psi
Line Pressure Effect on Zero 0.004 5psi: 0.0008 TYP %Span/psi
≥15psi: 0.0005 TYP
Long Term Stability ±0.25 ±0.1 %Span/year
Total Error Band -1.5 1.5 -1 1 %Span
Compensated Temperature 0 50 0 70 °C
-20 +85
Operating Temperature -40 +85 -40 +125 °C 4
Storage Temperature -40 +125 -40 +125 ºC 4
Load Resistance (R
L
) R
L
> 100k Ω 5
Sensor Type Differential Pressure Sensor with Unidirectional Calibration
Pressure Port Material 316L Stainless Steel
Bandwidth DC to 1KHz (typical)
Shock 50g, 11 msec Half sine shock per MIL-STD-202F, Method 213B, Condition A
Vibration ±20g, MIL-STD-810C, Procedure 514.2, Fig 514.2-2, Curve L
Notes
1. Combined linearity, hysteresis and repeatability using Best Fit Straight Line.
2. 1000psi, whichever is less.
3. 150psi, whichever is less.
4. Except cable 105°C Max.
5. Voltage output.
CE Compliance
IEC 55022 Emissions Class A & B
IEC 61000-4-2 Electrostatic Discharge Immunity (6kV contact/8kV air)
IEC 61000-4-3 EM Field Immunity (30V/m)
IEC 61000-4-4 Electrical Fast Transient Immunity (1kV)
IEC 61000-4-5 Surge (1kV)
IEC 61000-4-6 Conducted Immunity (10V)
IEC 61000-4-9 Pulsed Magnetic Field Immunity (100A/m)
Pressure Port Options Dim C (inches) [mm] Electrical Connection Options
2 = 1/4-19 BSPP Male 3.08 [78.3] 1 = 2 ft cable
5 = 1/4-18 NPT Male 3.18 [80.8] 4 = Packard Connector
F = 1/4-19 BSPP Female 2.18 [55.42] 5 = Bendix Connector
G = 1/4-18 NPT Female 2.18 [55.42] 6 = Hirschmann Connector
Others available upon request Others available upon request
D5100
Industrial Differential Pressure Transducer
D5100 www.meas-spec.com August 2012
3/7
DIMENSIONS (AMPLIFIED OUTPUT)
D5100
Industrial Differential Pressure Transducer
D5100 www.meas-spec.com August 2012
4/7
DIMENSIONS (AMPLIFIED OUTPUT)
D5100
Industrial Differential Pressure Transducer
D5100 www.meas-spec.com August 2012
5/7
OUTPUT OPTIONS (AMPLIFIED OUTPUT)
Supply(V)
Code Output MIN TYP MAX
3 0.5 – 4.5V (ratiometric) 4.75 5.00 5.25
4 1 – 5V 8 15 30
5 4 – 20mA 9 15 30
PERFORMANCE SPECIFICATIONS (mV OUTPUT)
Supply Voltage: 10Vdc
Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS 1 PSI ≥5 PSI UNITS NOTES
MIN TYP MAX MIN TYP MAX
Supply Voltage 10 14 10 14 VDC
Zero Pressure Output -2.0 0 2.0 5psi: -2.0 0 2.0 mV
≥15psi: -1.0 0 1.0
Span 77 80 83 5psi: 98 100 102 mV
≥15psi: 99 100 101
Accuracy -0.3 0.3 5psi: -0.25 0.25 %Span 1
≥15psi: -0.1 0.1
Input Resistance 5.5 9.0 12.5 5.5 9.0 12.5 KΩ
Output Resistance 4.0 30.0 5psi: 4.0 30.0 KΩ
≥15psi: 4.0 25.0
Isolation, Body To Any Lead 50 50 MΩ @50VDC
Pressure Cycles 1.00E+6 1.00E+6 0-FS Cycles
Proof Pressure (High Side) 10X 3X Rated 2
Proof Pressure (Low Side) 10X 3X Rated 3
Burst Pressure (High Side) 12X 4X Rated 2
Burst Pressure (Low Side) 12X 4X Rated 3
Line (common) Pressure 1000 1000 psi
Line Pressure Effect on Zero 0.004 5psi: 0.0008 TYP %Span/psi
≥15psi: 0.0005 TYP
Long Term Stability ±0.25 ±0.1 %Span/year
Temperature Coefficient – Span -1.5 1.5 5psi: -1.5 1.5 %Span
≥15psi: -1.0 1.0
Temperature Coefficient – Offset -2.5 2.5 5psi: -1.5 1.5 %Span
≥15psi: -1.0 1.0
Output Load Resistance 5 5 MΩ
Output Noise (10Hz to 1KHz) 1.0 1.0 uV p-p
Response Time (10% to 90%) 0.1 0.1 ms
Compensated Temperature 0 50 5psi: 0 70 °C
≥15psi: -20 85
Operating Temperature -40 +85 -40 +125 °C
Storage Temperature -40 +125 -40 +125 ºC 4
Voltage Breakdown 500V rms@50Hz, Leakage Current <1mA
Sensor Type Differential Pressure Sensor with Unidirectional Calibration
Pressure Port Material 316L Stainless Steel
Shock 50g, 11 msec Half sine shock per MIL-STD-202F, Method 213B, Condition A
D5100
Industrial Differential Pressure Transducer
D5100 www.meas-spec.com August 2012
6/7
Notes
1. Combined linearity, hysteresis and repeatability using Best Fit Straight Line.
2. 1000psi, whichever is less.
3. 150psi, whichever is less.
4. Except cable 105°C Max.
Pressure Port Options Dim C (inches) [mm] Electrical Connection Options
2 = 1/4-19 BSPP Male 3.08 [78.3] 1 = 2 ft cable
5 = 1/4-18 NPT Male 3.18 [80.8]
F = 1/4-19 BSPP Female 2.18 [55.42]
G = 1/4-18 NPT Female 2.18 [55.42]
Others available upon request Others available upon request
DIMENSIONS (mV OUTPUT)
D5100
Industrial Differential Pressure Transducer
D5100 www.meas-spec.com August 2012
7/7
OUTPUT OPTIONS (mV OUTPUT)
Supply(V)
Code Output MIN TYP MAX
2 80mV (1psi), 100mV (≥5psi) [ratiometric] 10 14
ORDERING INFORMATION
D5131-000005-300PD
Type (D = Differential)
Pressure Port (See Pressure Port Options Table)
Specials (nnnnn = Custom Drawing)
Output (See Output Options Table)
Connection (See Electrical Connections Table)
Pressure Range (See Pressure Range Table)
Model
Units (P = psi, B = Bar)
NORTH AMERICA EUROPE ASIA
Measurement Specialties
45738 Northport Loop West
Fremont, CA 94538
Tel: 1-800-745-8008
Fax: 1-510-498-1578
Sales: pfg.cs.amer@meas-spec.com
Measurement Specialties
(Europe), Ltd.
26 Rue des Dames
78340 Les Clayes-sous-Bois, France
Tel: +33 (0) 130 79 33 00
Fax: +33 (0) 134 81 03 59
Sales: pfg.cs.emea@meas-spec.com
Measurement Specialties
(China), Ltd.
No. 26 Langshan Road
Shenzhen High-Tech Park (North)
Nanshan District, Shenzhen 518057
China
Tel: +86 755 3330 5088
Fax: +86 755 3330 5099
Sales: pfg.cs.asia@meas-spec.com
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for
inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the
manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement
Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does
Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims
any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different
applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement
Specialties, Inc. does not convey any license under its patent rights nor the rights of others.
