CR65 SERIES
ROTARY CODE SWITCHES
F-2
APEM
F
•SAVE BOARD SPACE
Mounting in a hole pattern of 5,08 x
7,62 mm (.200 x .300), the CR65 series
rotary switches are available in BCD or
hexadecimal codes (real and comple-
ment).
Their compact housing is designed for
professional technology with modern as-
sembly processes.
•FACILITATE CODE SELECTION
A precise detent mechanism and a
rotation in both directions make code se-
lection particularly easy.
Setting is effected by means of a screw-
driver slot, segment wheel or accessory,
depending on the application.
•HIGHLY RELIABLE
The contact resistance is low and stable.
All switches are submitted to electric final
test. They are solder, flux sealed and
washable.
Production under ISO 9001 quality assu-
rance is a guarantee for highly reliable
products.
CR65
SERIES
Actuator
1Screwdriver
3Spindle
5Segment wheel
7Accessory
Terminals
(none) Straight
L254 Right angle,
spacing 2,54 (.100)
L508 Right angle,
spacing 5,08 (.200)
Codes
01 BCD
02 BCD complement
03 Hexadecimal
06 Hexadecimal complement
ELECTRICAL SPECIFICATIONS
• Operating voltage : 24 VDC max.
• Contact load, static : 400mA max.
• Contact load, dynamic : 150mA max.
• Initial contact resistance : 80 mΩmax.
• Insulation resistance : 100 MΩmin.
MECHANICAL AND THERMAL SPECS
• Torque : 0,7 Ncm min.
• Expected life : 10.000 cycles min.
• Operating temperature :
-20°C to +70°C
SOLDER RECOMMENDATIONS
(DIN CEI 68-2-20)
• Manual soldering : 340°C max.for
2 seconds max.
• Wave soldering : 260°C max. for
10 seconds max.
DIMENSIONS
Screwdriver slot, straight terminals
MATERIALS
• Base : UL94-V0, high temperature thermoplastic
• Cover : UL94-V0, high temperature thermoplastic
• Actuator : PA 4.6 nylon
• Contacts : gold over nickel plated phosphor bronze
• Terminals : tin plated
PACKAGING
• Switches for screwdriver slot or accessory actuation (CR651 and CR657) :
tubes of 50 pieces
• Switches with spindle (CR653) or segment wheel (CR655) : candy trays of
50 pieces
• Accessories : bags of 50 pieces
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.