VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series www.vishay.com Vishay Semiconductors Power Silicon Rectifier Diodes, (Stud Version), 35 A, 40 A, 60 A FEATURES * Low leakage current series * Good surge current capability up to 1000 A * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DO-5 (DO-203AB) PRIMARY CHARACTERISTICS IF(AV) 35 A, 40 A, 60 A Package DO-5 (DO-203AB) Circuit configuration Single MAJOR RATINGS AND CHARACTERISTICS PARAMETER IF(AV) IFSM I2t TEST CONDITIONS TC 1N3765 1N1183A 1N2128A 35 (1) 35 (1) 40 (1) 60 (1) A 140 (1) 140 (1) 150 (1) 140 (1) C 50 Hz 480 380 765 860 60 Hz 500 (1) 400 (1) 800 (1) 900 (1) 50 Hz 1140 730 2900 3700 60 Hz 1040 670 2650 3400 I2t VRRM 1N1183 16 100 Range TJ 50 to 600 10 300 (1) -65 to +200 700 to 1000 41 000 (1) -65 to +200 50 to 600 UNITS A A2s A2s 52 500 (1) -65 to +200 50 to 600 (1) V -65 to +200 C Note (1) JEDEC(R) registered values ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VS-1N1183 VS-1N1184 VS-1N1185 VS-1N1186 VS-1N1187 VS-1N1188 VS-1N1189 VS-1N1190 VS-1N3765 VS-1N3766 VS-1N3767 VS-1N3768 VS-1N1183A VS-1N1184A VS-1N1185A VS-1N1186A VS-1N1187A VS-1N1188A VS-1N1189A VS-1N1190A VS-1N2160 VS-1N2128A VS-1N2129A VS-1N2130A VS-1N2131A VS-1N2133A VS-1N2135A VS-1N2137A VS-1N2138A VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE (TJ = -65 C to +200 C (2)) V VRM, MAXIMUM DIRECT REVERSE VOLTAGE (TJ = -65 C to +200 C (2)) V 50 (1) 100 (1) 150 (1) 200 (1) 300 (1) 400 (1) 500 (1) 600 (1) 700 (1) 800 (1) 900 (1) 1000 (1) 50 (1) 100 (1) 150 (1) 200 (1) 300 (1) 400 (1) 500 (1) 600 (1) 700 (1) 800 (1) 900 (1) 1000 (1) Notes * Basic type number indicates cathode to case. For anode to case, add "R" to part number, e.g., 1N1188R, 1N3766R, 1N1186RA, 1N2135RA (1) JEDEC(R) registered values (2) For 1N1183 Series and 1N3765 Series T = -65 C to +190 C C Revision: 10-Jul-2018 Document Number: 93492 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL Maximum average forward current at case temperature IF(AV) TEST CONDITIONS IFSM Half cycle 60 Hz sine wave or 5 ms rectangular pulse Half cycle 50 Hz sine wave or 6 ms rectangular pulse 140 40 (1) (1) 150 (1) 60 (1) 140 (1) 480 380 765 860 500 (1) 400 (1) 800 (1) 900 (1) A C A Following any rated load condition and with 1/2 VRRM applied following surge = 0 910 1000 595 475 950 1050 1140 730 2900 3700 1040 670 2650 3400 1610 1030 4150 5250 1470 940 3750 4750 16 100 10 300 41 500 52 500 1.7 (1) 1.8 (1) 1.3 (1) 1.3 (1) V 110 110 126 188 A VRRM = 700 - 5.0 (1) - - VRRM = 800 - 4.0 (1) - - - 3.0 (1) - - - 2.0 (1) - - 10 (1) - 2.5 (1) 10 (1) for fusing t = 8.3 ms I2t t = 10 ms Maximum I2t for individual device fusing t = 8.3 ms Maximum I2t for individual device fusing I2t (2) Maximum peak forward voltage at maximum forward current (IFM) Maximum average reverse current Following any rated load condition and with rated VRRM applied 35 (1) 455 t = 10 ms Maximum 140 (1) 1N3765 1N1183A 1N2128A UNITS 570 Half cycle 60 Hz sine wave or 5 ms rectangular pulse I2t 35 (1) 1-phase operation, 180 sinusoidal conduction Half cycle 50 Hz sine wave or 6 ms rectangular pulse Maximum peak one cycle non-repetitive surge current 1N1183 VFM IR(AV) VRRM = 900 With rated VRRM applied following surge, initial TJ = TJ maximum With VRRM = 0 following surge, initial TJ = TJ maximum t = 0.1 to 10 ms, VRRM = 0 following surge TJ = 25 C Maximum rated IF(AV) and TC VRRM = 1000 Maximum rated IF(AV), VRRM and TC A2s A2s mA Notes (1) JEDEC(R) registered values (2) I2t for time t = I2t x t x x THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum operating case temperature range SYMBOL TEST CONDITIONS 1N1183 1N3765 1N1183A 1N2128A UNITS TC -65 to +190 (1) -65 to +200 Maximum storage temperature range TStg -65 to +175 (1) -65 to +200 Maximum internal thermal resistance, junction to case RthJC DC operation Thermal resistance, case to sink RthCS Mounting surface, smooth, flat and greased C 1.00 (1) Not lubricated thread, tighting on hexagon Approximate weight JEDEC(R) 0.25 3.4 (30) Lubricated thread, tighting on nut (2) Lubricated thread, tighting on hexagon (3) Case style 0.65 (1) C/W Not lubricated thread, tighting on nut (2) Maximum allowable mounting torque (+ 0 %, - 10 %) 1.1 (1) 2.3 (20) (3) 4.2 (37) N*m (lbf * in) 3.2 (28) 17 g 0.6 oz. DO-5 (DO-203AB) Notes (1) JEDEC registered values(R) (2) Recommended for pass-through holes (3) Recommended for holed threaded heatsinks Revision: 10-Jul-2018 Document Number: 93492 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series Vishay Semiconductors 190 180 O 170 Conduction Period 160 150 DC 140 +60 C +120 C +180 C 130 120 110 100 0 10 20 30 50 40 60 IF - Instantaneous Forward Current (A) Maximum Allowable Case Temperature (C) www.vishay.com TJ = 190 C 101 TJ = 25 C 1 0 1 2 3 4 5 6 IF - Instantaneous Forward Voltage (V) Fig. 1 - Maximum Allowable Case Temperature vs. Average Forward Current, 1N1183 and 1N3765 Series Fig. 4 - Typical Forward Voltage vs. Forward Current, 1N1183 and 1N3765 Series 60 50 +180 C 40 DC 30 20 O 10 Peak Half Sine Wave Forward Current (Per Unit) 1.0 +60 C +120 C TJ = 190 C At any rated load condition and with rated VRRM applied following surge Series Per Unit Base-A 1N1183 500 1N3765 400 0.9 0.8 0.7 0.6 50 Hz 60 Hz 0.5 0.4 Conduction Period 0 0.3 0 10 20 30 40 50 1 20 40 60 90 Average Forward Current Over Full Cycle (A) +180 C +120 C +60 C 103 102 Conduction Period 10 102 103 80 70 104 Average Forward Power Loss Over Full Cycle (W) Fig. 3 - Typical High Level Forward Power Loss vs. Average Forward Current (Sinusoidal Current Waveform), 1N1183 and 1N3765 Series DC +180 C Wave +120 C & 60 50 +180 C Wave Wave 40 30 20 10 O 10 6 8 10 100 TJ = 140 C DC 104 4 Fig. 5 - Maximum Non-Repetitive Surge Current vs. Number of Current Pulses, 1N1183 and 1N3765 Series Fig. 2 - Typical Low Level Forward Power Loss vs. Average Forward Current (Sinusoidal Current Waveform), 1N1183 and 1N3765 Series 105 2 Number of Equal Amplitude Current Pulses (N) Average Forward Current Over Full Cycle (A) Average Forward Current Over Full Cycle (A) Typical 102 Average Forward Current Over Full Cycle (A) 70 Average Forward Power Loss Over Full Cycle (W) 103 +60 C & Wave +Conduction Period 0 110 120 130 140 150 160 170 180 190 200 Maximum Allowable CaseTemperature (C) Fig. 6 - Average Forward Current vs. Maximum Allowable Case Temperature, 1N1183A Series Revision: 10-Jul-2018 Document Number: 93492 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series www.vishay.com Vishay Semiconductors 1.0 +180 C Wave +180 C Wave 90 80 +120 C 70 +60 C & & DC Maximum Peak Half Sine Wave Forward Current (Per Unit) Average Forward Power Loss Over Full Cycle (W) 100 Wave Wave 60 50 40 TJ = 200 C 30 20 +Conduction Period 10 0 10 20 30 40 50 60 0.7 0.6 60 Hz 0.5 50 Hz 0.4 70 1 2 4 6 8 10 20 40 60 Number of Equal Amplitude Current Pulses (N) Fig. 10 - Maximum Non-Repetitive Surge Current vs. Number of Current Pulses, 1N1183A Series Average Forward Current Over Full Cycle (A) Fig. 7 - Maximum Low Level Forward Power Loss vs. Average Forward Current, 1N1183A Series 1.0 104 +180 C Wave +180 C Wave +120 C 103 +60 C & & DC Maximum Peak Half Sine Wave Forward Current (Per Unit) Average Forward Power Loss Over Full Cycle (W) 0.8 0.3 0 Wave Wave 102 TJ = 200 C +Conduction Period At any rated load condition and with rated VRRM applied following surge Series Per Unit Base-A 1N2128A 900 0.9 0.8 0.7 0.6 60 Hz 0.5 0.4 50 Hz 0.3 1 10 102 10 103 1 Average Forward Current Over Full Cycle (A) 103 2 10 TJ = 25 C 10 TJ = 200 C 1 10-1 0 0.5 1 1.5 2 2.5 3 3.5 Instantaneous Forward Voltage (V) Fig. 9 - Maximum Forward Voltage vs. Forward Current, 1N1183A Series Maximum Allowable Case Temperature (C) 104 2 4 6 8 10 20 40 60 Number of Equal Amplitude Current Pulses (N) Fig. 11 - Maximum Non-Repetitive Surge Current vs. Number of Current Pulses, 1N2128A Series Fig. 8 - Maximum High Level Forward Power Loss vs. Average Forward Current, 1N1183A Series Instantaneous Forward Current (A) At any rated load condition and with rated VRRM applied following surge Series Per Unit Base-A 1N1183A 800 0.9 200 +60 C & +120 C & +180 C +180 C 180 Wave Wave Wave Wave 160 140 DC 120 100 +Conduction Period 80 60 0 10 20 30 40 50 60 70 80 90 100 Average Forward Current Over Full Cycle (A) Fig. 12 - Maximum Allowable Case Temperature vs. Average Forward Current, 1N2128A Series Revision: 10-Jul-2018 Document Number: 93492 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series www.vishay.com Vishay Semiconductors 103 +60 C 60 50 40 30 TJ = 140 C +60 C & +120 C & +180 C +180 C Wave Wave Wave Wave +Conduction Period 20 & +90 C & +180 C +180 C Average Forward Power Loss Over Full Cycle (W) Average Forward Power Loss Over Full Cycle (W) 70 DC 10 TJ = 140 C +Conduction Period 102 +180 C +180 C +120 C & +60 C & 10 10 20 30 40 104 DC DC 0 0 105 Wave Wave Wave Wave 50 102 10 103 Wave Wave Wave Wave 104 103 Average Forward Current Over Full Cycle (A) Fig. 13 - Maximum Low Level Forward Power Loss vs. Average Forward Current, 1N2128A Series Fig. 14 - Maximum High Level Forward Power Loss vs. Average Forward Current, 1N2128A Series Instantaneous Forward Current (A) Average Forward Current Over Full Cycle (A) 104 103 102 TJ = 140 C 101 TTJJ == 25 C C 1.0 0 1 2 3 4 5 6 7 Instantaneous Forward Voltage (V) Fig. 15 - Maximum Forward Voltage vs. Forward Current, 1N2128A Series LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95360 Revision: 10-Jul-2018 Document Number: 93492 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors DO-203AB (DO-5) for 1N1183, 1N3765, 1N1183A, 1N2128A, 1N3208 Series DIMENSIONS in millimeters (inches) O 14.6 (0.57) 6.1 (0.24) 7.0 (0.28) O 4.10 (0.16) O 3.80 (0.15) 1.03 (0.04) MAX. 4 (0.16) MIN. 25.4 (1.0) MAX. 10.8 (0.43) 11.4 (0.45) 10.7 (0.42) 11.5 (0.45) 1/4" 28UNF-2A for metric devices: M6 x 1 1.0 (0.04) MAX. Document Number: 95360 Revision: 29-Sep-08 17.40 (0.68) MIN. Across flats For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-1N1184A VS-1N1188A VS-1N1190RA VS-1N2133RA VS-1N2137A VS-1N3765 VS-1N2138A VS-1N3768R VS-1N2131RA VS-1N2128A VS-1N2129A VS-1N2135RA VS-1N3767 VS-1N1184 VS-1N1185 VS-1N1186A VS1N1188 VS-1N1188R VS-1N1189R VS-1N1189A VS-1N1190A VS-1N1183A VS-1N1188RA VS-1N1183 VS1N1184R VS-1N1184RA VS-1N1186RA VS-1N2129RA VS-1N2130RA VS-1N2131A VS-1N3766 VS-1N3766R VS-1N3768 VS-1N1187R VS-1N2128RA VS-1N1190R VS-1N1189 VS-1N1190 VS-1N1189RA VS-1N1183R VS1N1186 VS-1N1186R VS-1N1187 VS-1N2138RA VS-1N1187A VS-1N2135A VS-1N1183RA VS-1N1185R VS1N2130A VS-1N1185A VS-1N2133A VS-1N1187RA