3.2x1.6mm SMD CHIP LED LAMP AP3216SEC/E HYPER ORANGE Features Description !3.2mmx1.6mm SMT LED, 1.1mm THICKNESS. The Hyper Orange source color devices are made !LOW POWER CONSUMPTION. with DH InGaAlP on GaAs substrate Light Emitting !WIDE VIEWING ANGLE. Diode. !IDEAL FOR BACKLIGHT AND INDICATOR. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO:DSAC1537 APPROVED: J.Lu REV NO: V.1 CHECKED:Allen Liu DATE: DEC/12/2002 DRAWN: X.T.HU PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e AP3216SEC/E Iv (m c d ) @ 20 m A L en s Ty p e HYPER ORANGE(InGaAIP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 21/2 110 280 120 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Sy m b o l P ar am et er D ev i c e peak Peak Wavelength Hyper Orange D Dominate Wavelength 1/2 Ty p . Max . Un its Tes t Co n d it io n s 630 nm I F =20mA Hyper Orange 621 nm I F =20mA Spectral Line Half-width Hyper Orange 20 nm I F =20mA C Capacitance Hyper Orange 25 pF VF=0V;f=1MHz VF Forward Voltage Hyper Orange 2.0 2.5 V I F =20mA IR Reverse Current Hyper Orange 10 uA V R = 5V Absolute Maximum Ratings at TA=25C P ar am et er Hy p er Or an g e Un its Power dissipation 150 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO:DSAC1537 APPROVED: J.Lu REV NO: V.1 CHECKED:Allen Liu DATE: DEC/12/2002 DRAWN: X.T.HU PAGE: 2 OF 4 Hyper Orange SPEC NO:DSAC1537 APPROVED: J.Lu AP3216SEC/E REV NO: V.1 CHECKED:Allen Liu DATE: DEC/12/2002 DRAWN: X.T.HU PAGE: 3 OF 4 AP3216SEC/E SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO:DSAC1537 APPROVED: J.Lu REV NO: V.1 CHECKED:Allen Liu DATE: DEC/12/2002 DRAWN: X.T.HU PAGE: 4 OF 4