API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Minimum Insertion Loss (dB)
✝SCI-9925-153
✝SCI-9925-303
✝SCI-9925-502
✝SCI-9925-000
✝SCI-9925-101
✝SCI-9925-501
✝SCI-9925-122
SCI-9925-272
This new knurled filter is designed to be pressed
into place and create a reliable mechanical bond. This
feature makes it an excellent selection for applications
where soldering is undesirable. Suitable plating is
available that allows gold bonding to the terminals.
Applications
These filters are ideal for microwave and RF applica-
tions such as attenuators, synthesizers, and oscillators.
They perform well in high impedance circuits where
large capacitance values are not practical.
Installation
■
.136" to .137" (3.45-3.48mm) diameter hole
■
Hole must be free of all insulating materials.
■
Installation tool must have a hole of sufficient depth
and diameter to accept the terminal of the filter.
■
Installation force must be applied gradually and
smoothly until the flange of the filter is seated against
the receiving part (request installation instructions).
Mechanical Specifications
Installation . . . . . . . . . . . . . Press-in
Plating . . . . . . . . . . . . . . . . Gold
Seal . . . . . . . . . . . . . . . . . . Glass sealed on one end,
. . . . . . . . . . . . . . . . . . . . . resin sealed on the other end
Termination Options . . . . . . Plating suitable for gold
. . . . . . . . . . . . . . . . . . . . . bonding
Operating Temperature . . . . -55°C to +125°C
50
50
100
200
200
200
200
200
Rated Voltage
125°C
I
Amp Cap
10
MHz
Part Number
✝Also available through API’s authorized distributors.
Note: Parts are RoHS Compliant
Figure
DC
30
MHz
100
MHz
300
MHz
1
GHz
10
GHz
1
MHz
1
1
1
1
1
1
1
1
5
5
5
5
5
5
5
5
0.015 µF +100%/-0%
0.030 µF +100%/-0%
5000 pF +100%/-0%
10 pF max.
100 pF +100%/-0%
500 pF +100%/-0%
1200 pF +100%/-0%
2700 pF +100%/-0%
7
10
—
—
—
—
—
—
25
30
15
—
—
—
5
10
30
35
20
—
—
—
10
18
40
45
30
—
3
15
20
25
40
50
35
—
10
22
28
33
60
55
45
10
20
35
35
40
60
55
55
10
28
40
45
50
Spec Mini-Press
9900 Series
Built and tested in accordance with MIL-F-15733.
.625 (15.88) ref.
.010
± .002
(.254
±.051)
.156
± .005
dia.
(3.96
± .127
dia.)
.143 ± .002
(3.63 ± .051)
.128 ± .005
dia.
(3.25 ± .127
dia.)
Glass Seal End
Straight Knurl,
160 D.P.
.110
±.005
(2.79
±.127)
.020
± .005
(.508
±.127)
.030
± .002
dia.
(.762
± .051
dia.)
Epoxy
Seal
Figure 1
.025
(0.635)
.250
± .030
(6.35
±.762)
Circuit Schematic
OutputInput
Ground
Dimensions in inches (mm)
LP10
Insertion Tool
Part Number: SCI-9925-200
