Quietaire Sintered Bronze Silencers T40 Series M5, G1 8 - G1, R1 8 - R1 Reduce the noise levels of pneumatic equipment Compact and efficient Screw directly into the exhaust port Prevent the ingress of dirt Technical Data Medium: Compressed air, filtered, lubricated or non lubricated, vacuum, Inert gases Operation: Exhaust silencer or inlet filter e.g. T40B3800 for the R3 8 model Alternative Models M/S & C/S range of porous plastic models, see page 10.5.011.01 Mounting: Directly in exhaust or vent port Port sizes: Male thread Metric BSPP M5 T40M0500 G1 8 G1 4 G3 8 G1 2 G3 4 G1 Ordering Information To order, quote appropriate product number from the tables on the following pages. Quietaire range of heavy duty models, see page 10.5.031.01 BSPT T40C1800 T40C2800 T40C3800 T40C4800 T40C6800 T40C8800 R1 8 R1 4 R3 8 R1 2 R3 4 R1 T40B1800 T40B2800 T40B3800 T40B4800 T40B6800 T40B8800 Operating Pressure: 10 bar maximum Operating Temperature: -20C to +80C Consult our Technical Service for use below +2C Materials Sintered bronze element, brass body 04/96 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N/UK 10.5.021.01 Quietaire Sintered Bronze Silencers General Information Model Metric/ BSPP T40M0500 T40C1800 T40C2800 T40C3800 T40C4800 T40C6800 T40C8800 Model BSPT(R) Port Connection Flow Factor Cv** 0,2 0,54 1,6 3,5 5,1 9 11,6 M5 1 8" T40B1800 T40B2800 T40B3800 T40B4800 T40B6800 T40B8800 1 4" 3 8" 1 2" 3 4" 1" Continuous Sound Pressure Level 0.7 bar 6 bar 56 70 66 75 68 78 75 84 75 88 87 96 93 100 C* 1 2,5 6,3 14 21 37 48 Weight (Kg) 0,004 0,001 0,02 0,045 0,07 0,13 0,2 *C measured in dm3/(s.bar) **CV measured in US gall/min SPL in dBA at 1m from unit Silencers Model T40M0500 T40C1800 T40C2800 T40C3800 T40C4800 T40C6800 T40C8800 OD E A F B G C A M5 G1 8 G1 4 G3 8 G1 2 G3 4 G1 B 5 6 8 10 12 14 16 C 15 18 25 34 44 66 66 D 5 9,5 12 17 20 26 31 E 2,5 6 8,5 12 14,8 19 25 F 20 24 33 44 56 80 82 G 7 13 17 22 27 32 41 C 18 25 34 44 66 66 D 9,5 12 17 20 26 31 E 6 8,5 12 14,8 19 25 F 27,5 36 46,5 60 85 88,5 G 13 17 22 27 32 41 A - according to ISO - 228/1 Model T40B1800 T40B2800 T40B3800 T40B4800 T40B6800 T40B8800 OD E A F B C G A R1 8 R1 4 R3 8 R1 2 R3 4 R1 B 9,5 11 12,5 16 19 22,5 A - according to ISO - 7/1 Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under `Technical Data'. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where applicable. N/UK 10.5.021.02 Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 04/96