VLSL3012A2, VLSL3024A2
www.vishay.com Vishay Semiconductors
Rev. 1.3, 05-Dec-11 1Document Number: 83383
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Brightness LED Power Module
DESCRIPTION
The VLSL3012A2, VLSL3024A2 are metal core based high
brightness LED power modules, assembled with 12 or 24 HB
white LEDs. The color temperature is cool white in the typical
range of 5000 K to 7000 K. The modules are designed for
flexible use due to the option for using special reflectors to
adjust the emission characteristics.
PRODUCT GROUP AND PACKAGE DATA
Product group: LED
•Package: LED module
Product series: power
Angle of half intensity: ± 80°
FEATURES
Metal core PCB: Al > 0.75 thickness
Single side/single layer PCB
Shiny white surface
12 or 24 LEDs, max. current per LED 1 A
Conductive top layer: Cu (min. 18 μm)
Isolation layer prepreg > 63 μm
Standard solder mask material
ESD withstand voltage: up to 2 kV according to
JESD22-A114-B
LM80 certified LEDs
Compliant to RoHS Directive 2002/95/EC
Note
** Please see document “Vishay Material Category Policy”:
www.vishay.com/doc?99902
APPLICATIONS
Streetlight
Internal lighting in buildings
Tunnel lights
General lighting application
22454
22139
PARTS TABLE
PART COLOR LUMINOUS FLUX
(at IF = 700 mA typ.)
COLOR TEMPERATURE
KTECHNOLOGY
VLSL3012A2 Cool white ΦV = 2100 lm 5000 to 7000 InGaN
VLSL3024A2 Cool white ΦV = 4200 lm 5000 to 7000 InGaN
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
VLSL3012A2, VLSL3024A2
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Forward current Per row IF750 mA
Power dissipation VLSL3012A2 Total (max.) Ptot 34.5 W
Power dissipation VLSL3024A2 Ptot 69 W
Junction temperature Tj120 °C
Operating temperature range Tamb - 40 to + 85 °C
Storage temperature range Tstg - 40 to + 85 °C
VLSL3012A2, VLSL3024A2
www.vishay.com Vishay Semiconductors
Rev. 1.3, 05-Dec-11 2Document Number: 83383
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of ± 0.1 V. Luminous flux is measured at a current pulse
duration of 25 ms and an accuracy of ± 11 %.
(1) Calculated based on single LED unit.
(2) VF classes are marked at the LED cluster and represent the technical classification only. The single groups cannot be specifically ordered.
Notes
Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of ± 0.1 V. Luminous flux is measured at a current pulse
duration of 25 ms and an accuracy of ± 11 %.
(1) Calculated based on single LED unit.
(2) VF classes are marked at the LED cluster and represent the technical classification only. The single groups cannot be specifically ordered.
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
VLSL3012A2, COOL WHITE
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Luminous flux per row (1) IF = 700 mA ΦV860 1050 - lm
Luminous flux total (1) Iboard = 2 x 700 mA ΦV1720 2100 - lm
Color temperature IF = 700 mA TK 5000 - 7000 K
Forward voltage per row IF = 700 mA VF19 21 23 V
Class A (VFmax. - VFmin.) all rows (2) IF = 700 mA ΔVF--0.9V
Temperature coefficient of VF per row IF = 350 mA TCVF -- 20-mV/K
Temperature coefficient of ΦVIF = 350 mA (per row) TCΦV- - 0.4 - %/K
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
VLSL3024A2, COOL WHITE
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Luminous flux per row (2) IF = 700 mA ΦV860 1050 - lm
Luminous flux total (2) Iboard = 4 x 700 mA ΦV3440 4200 - lm
Color temperature IF = 700 mA TK 5000 - 7000 K
Forward voltage per row IF = 700 mA VF19 21 23 V
Class A (VFmax. - VFmin.) all rows (3) IF = 700 mA ΔVF--0.9V
Temperature coefficient of VF per row IF = 350 mA TCVF -- 20-mV/K
Temperature coefficient of ΦVIF = 350 mA (per row) TCΦV- - 0.4 - %/K
VLSL3012A2, VLSL3024A2
www.vishay.com Vishay Semiconductors
Rev. 1.3, 05-Dec-11 3Document Number: 83383
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
COLOR RANGE AND COLOR BINNING
VLSL3012A2, VLSL3024A2: 5000 K to 7000 K group 6P to7R
Fig. 1 - Chromaticity Coordinates of Colorgroups
CHROMATICITY COORDINATED GROUPS FOR COOL WHITE SMD LED
GROUP X Y GROUP X Y GROUP X Y
6P
0.309 0.302
6Q
0.307 0.311
6R
0.305 0.322
0.307 0.311 0.305 0.322 0.304 0.329
0.317 0.331 0.317 0.346 0.317 0.356
0.317 0.318 0.317 0.331 0.317 0.346
7P
0.317 0.318
7Q
0.317 0.331
7R
0.317 0.356
0.317 0.331 0.317 0.356 0.322 0.365
0.334 0.365 0.334 0.365 0.330 0.373
0.338 0.360 0.317 0.331 0.334 0.365
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.3 0.31 0.32 0.33 0.34
7R
7Q
7P
6R
6Q
6P
22138 x - Coordinate
y - Coordinate
Black body curve
VLSL3012A2, VLSL3024A2
www.vishay.com Vishay Semiconductors
Rev. 1.3, 05-Dec-11 4Document Number: 83383
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PCB BASIC DESIGN VLSL3012A2 DIMENSIONS in millimeters
Assembled with all jumpers. Jumpers can be removed according driver design
specications
according to DIN
technical drawings
Not indicated tolerances ± 0.2
Drawing-No.: 9.920-6752.01-4
Issue: 2; 02.11.10
22456
7.5
20
4 x 20 = 80
4.5
84.5
3
64.5
129
135
18.25 18.5
5 x 18.5 = 92.5
121
7
30
50
2.5
6
95
1.2
4 ± 0.4
JP
JP
Ø 3.5 (13x)
row 1234
- + - ++ - + -
VLSL3012A2, VLSL3024A2
www.vishay.com Vishay Semiconductors
Rev. 1.3, 05-Dec-11 5Document Number: 83383
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PCB BASIC DESIGN VLSL3024A2 DIMENSIONS in millimeters
Assembled with all jumpers. Jumpers can be removed according driver design
specications
according to DIN
technical drawings
Not indicated tolerances ± 0.2
Drawing-No.: 9.920-6751.01-4
Issue: 2; 02.11.10
22455
row 1 2 3 4
- + - ++ - + -
4.5
7.5
20
4 x 20 = 80
84.5
10 20
3 x 20 = 60
3
64.5
129
135
18.25 18.5
5 x 18.5 = 92.5
121
7
2.5
6
95
1.2
4 ± 0.4
JP JP JP
JP JP JP
Ø 3.5 (13x)
VLSL3012A2, VLSL3024A2
www.vishay.com Vishay Semiconductors
Rev. 1.3, 05-Dec-11 6Document Number: 83383
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PCB CHARACTERISTICS
Metal core PCB with typical Al thickness of 800 μm
Prepreg thickness typical 127 μm
Conductive pattern Cu typical 25 μm
Total board thickness: 1 mm ± 15 %
Warpage max. 0.75 % of board dimension
Solder resist on top side
Shiny white surface
Galvanic of solder pads pure matte Sn ( 0.8 μm),
immersion plated
Assembled with 12 or 24 high brightness power LEDs.
LED position accuracy ± 0.125 mm from middle axis,
horizontal tilt max. 2°
EMISSION CHARACTERISTIC
Fig. 2 - Rel. Luminous Intensity vs. Angular Displacement
Fig. 3 - Sample Board with Reflectors (for Info only)
BAR CODE PRODUCT LABEL
A. Type of component
B. Manufacturing plant
C. SEL - selection code (bin):
e.g.: code for VF class (A, B, C)
D. Batch:
200707 = year 2007, week 07
PH19 = plant code
E. Total quantity
0.4 0.2 00.6
0.9
0.8
10° 20° 30°
40°
50°
60°
70°
80°
0.7
1.0
I
V rel
- Relative Luminous Intensity
ϕ - Angular Displacement
horizontal vertical
22143
21853
A
C
B
D
E
20613
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
VLSL3012A2 VLSL3024A2