Thermal Interface
3
THERMAL INTERFACE MATERIAL PART NUMBER GUIDE
Manufacturer Thermal Impedance Thickness,
Suffix Product C-in^2/W Inches Package Surface, Comments
-T1 Chomerics, T405 0.47 0.006 Metal/ceramic; aluminum carrier
-T1E Chomerics, T405R 0.47 0.006 RoHS-compliant version of -T1
-T3 Chomerics, T412 0.25 0.009 Metal/ceramic; very good
performance and conformity
-T4 Chomerics, T410 1.10 0.007 Plastic
-T4E Chomerics, T410R 1.10 0.007 RoHS-compliant version of -T4
-T5 Chomerics, T411 1.00 0.011 Plastic; conforms to out-of-flat packages
-T6 3M, 8810 0.88 0.010 Metal/ceramic; very good
adhesion and conformity
-T7 Bergquist, BP 108 1.28 0.008 Metal/ceramic; electrically insulating
All of the heat sinks shown in this catalog are available with any of the following thermal tape and interface materials, pre-applied at the
factory. Use the “T” series, thermally enhanced, pressure sensitive adhesives to attach the heat sink to the electronic package and provide
agood thermal link to the heat sink. The “S” series interface materials have adhesives on only one side, for pre-attachment to the heat
sink, and provide superior thermal performance. Specify these materials in applications where the heat sink will be fixed to the electronic
package by some mechanical means other than a tape. Please note that none of these materials are for use in applications requiring
electrical isolation from the electronic device. All options other than -T1 and -T4 are RoHS compliant.
Note: To obtain the estimated thermal resistance of the interface material in your application, divide the thermal impedance value by the
area of the pad in square inches. For example, a 2” x 2” piece of T4 has a resistance of 1.10 C-in^2/W 4 in^2=0.275 C/W
“T” SERIES THERMALLY ENHANCED PRESSURE SENSITIVE ADHESIVES
ORDERING INFORMATION
Once you have chosen heat sink and thermal interface material that meets your thermal & mechanical requirements it is easy to
designate the part number. Simply add the interface material suffix referenced on the chart above to the base part number for the
heat sink. The base part number already includes information regarding its size and finish.
Example:
To order the 658 Series heat sink at .350” tall with the T5 thermal interface material, specify part number:
658-35AB - T5
From Catalog Page ?? From Table on Page ??
Manufacturer Thermal Impedance Thickness,
Suffix Product C-in^2/W Inches Package Surface, Comments
-S4 Berquist Softface 0.06 0.005 All surfaces;
requires mechanical fasteners
“S” SERIES THERMAL INTERFACE PADS
Integrated Circuit
Heat Sinks
4
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
Omnidirectional Pin Fin Heat Sink for BGAs
Fin Height
Standard Base Dimensions “A” Typical Weight
P/N in. Sq. in. (mm) Applications lbs. (grams)
624-25AB .827 (21) .250 (6.4) 21mm BGA .009 (4.09)
624-35AB .827 (21) .350 (8.9) 21mm BGA .011 (4.99)
624-45AB .827 (21) .450 (11.4) 21mm BGA .015 (6.81)
624-60AB .827 (21) .600 (15.2) 21mm BGA .026 (11.80)
Material: Aluminum, Black Anodized
The 624 Series is an omnidirectional pin fin heat sink for both natural and
forced-convection applications.
Applications include network routers and switches, high-resolution printers,
digital cameras, consumer video games, digital video disks (DVD) and
global positioning systems (GPS).
PRODUCT FEATURES
•Available in four standard heights, .25 inch, .35 inch, .45 inch, and .60
inch.
•Available with pressure sensitive adhesives for quick and easy mounting.
See Page 3
624 SERIES
Omnidirectional Pin Fin Heat Sink for BGAs
625 SERIES
624 THERMAL PERFORMANCE
Fin Height
Standard Base Dimensions “A” Typical Weight
P/N in. Sq. in. (mm) Applications lbs. (grams)
625-25AB .984 (25) 0.250 (6.4) 25 mm BGA .012 (5.45)
625-35AB .984 (25) 0.350 (8.9) 25 mm BGA .014 (6.36)
625-45AB .984 (25) 0.450 (11.4) 25 mm BGA .018 (8.17)
625-60AB .984 (25) 0.600 (15.2) 25 mm BGA .030 (13.62)
Material: Aluminum, Black Anodized
The 625 Series is an omnidirectional pin fin heat sink for both natural and
forced-convection applications.
Applications include network routers and switches, high-resolution printers,
digital cameras, consumer video games, digital video disks (DVD) and
global positioning systems (GPS).
PRODUCT FEATURES
•Available in four standard heights, .25 inch, .35 inch, .45 inch, and .60
inch.
•Available with pressure sensitive adhesives for quick and easy mounting.
See Page 3
Case-to-Ambient Thermal Resistance, C/W
Approach Velocity, LFM
200 300 400 500 600
30
25
20
15
10
5
0
624-25-T4
624-35-T4
624-45-T4
624-60-T4
Case-to-Ambient Thermal Resistance, C/W
Approach Velocity, LFM
200 300 400 500 600
10
20
18
16
14
12
8
6
4
2
0
625-25-T4
625-25-T4
625-45-T4
625-60-T4
Dimensions: in.
625 THERMAL PERFORMANCE
MECHANICAL DIMENSIONS
Dimensions: in.
MECHANICAL DIMENSIONS
624 SERIES
625 SERIES
Integrated Circuit
Heat Sinks
5
Unidirectional Fin Heat Sink for BGAs
Standard Base Dimensions Height Typical Heat Sink Weight
P/N in. (mm) in. (mm) Application Finish lbs. (grams)
659-65AB 1.45 (36.8) sq 0.650 (16.5) 37mm BGA Black Anodized 0.050 (22.68)
Notes: 1. Optional factory preapplied pressure-sensitive adhesive. See Page 3
MECHANICAL DIMENSIONS NATURAL AND FORCED
CONVECTION CHARACTERISTICS
Dimensions: in. (mm)
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
Omnidirectional Pin Fin Heat Sink for BGAs and PowerPC™
Standard Base Dimensions Dimension “A” Dimension “B” Typical Heat Sink Weight
P/N in. (mm) in. (mm) in. (mm) Applications Finish lbs. (grams)
655-26AB 1.600 (40.6) sq 0.260 (6.6) 0.125 (3.2) 40mm BGA Black Anodized 0.038 (17.01)
655-53AB 1.600 (40.6) sq 0.525 (13.3) 0.145 (3.7) 40mm BGA Black Anodized 0.050 (22.68)
Notes: 1. Optional factory preapplied pressure-sensitive adhesive. See Page 3
Dimensions: in. (mm)
NATURAL AND FORCED
CONVECTION CHARACTERISTICS
MECHANICAL DIMENSIONS
Omnidirectional Pin Fin Heat Sink for BGAs and PowerPC™
Standard Base Dimensions Dimension “A” Typical Heat Sink Weight
P/N in. (mm) in. (mm) Applications Finish lbs. (grams)
658-25AB 1.100 (27.9) sq 0.250 (6.4) 27mm BGA Black Anodized 0.013 (5.67)
658-35AB 1.100 (27.9) sq 0.350 (8.9) 27mm BGA Black Anodized 0.015 (6.70)
658-45AB 1.100 (27.9) sq 0.450 (11.4) 27mm BGA Black Anodized 0.019 (8.50)
658-60AB 1.100 (27.9) sq 0.600 (15.2) 27mm BGA Black Anodized 0.031 (14.17)
Notes: 1. Optional factory preapplied pressure-sensitive adhesive. See Page 3
Dimensions: in. (mm)
NATURAL AND FORCED
CONVECTION CHARACTERISTICS
MECHANICAL DIMENSIONS
KEY: 658-25AB +658-35AB 658-45AB 658-60AB
659 SERIES
655 SERIES
658 SERIES
Integrated Circuit
Heat Sinks
6
Unidirectional Fin Heat Sink for BGAs
MECHANICAL
DIMENSIONS
NATURAL AND FORCED
CONVECTION CHARACTERISTICS
Dimensions: in. (mm)
Standard Base Dimensions Height Typical Heat Sink Weight
P/N in. (mm) in. (mm) Application Finish lbs. (grams)
660-29AB 1.530SQ. (38.9)SQ. 0.285 (7.2) 37mm BGA Black Anodized 0.031 (14.17)
Notes: 1. Optional factory preapplied pressure-sensitive adhesive. See Page 3
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
Unidirectional Fin Heat Sink for BGAs
Standard Base Dimensions Fin Height "A" Typical Weight
P/N in. Sq. in. (mm) Applications lbs. (grams)
642-25AB 1.378 (35) .250 (6.4) 35 mm BGA .022 (9.99)
642-35AB 1.378 (35) .350 (8.9) 35 mm BGA .027 (12.26)
642-45AB 1.378 (35) .450 (11.4) 35 mm BGA .031 (14.07)
642-60AB 1.378 (35) .600 (15.2) 35 mm BGA .039 (17.71)
Material: Aluminum, Black Anodized
The 642 Series is an unidirectional pin fin heat sink for both natural and
forced-convection applications.
Applications include network routers and switches, high-resolution printers,
digital cameras, consumer video games, digital video disks (DVD) and global
positioning systems (GPS).
PRODUCT FEATURES
•Available in four standard heights, .25 inch, .35 inch, .45 inch, and .60 inch.
•Available with pressure sensitive adhesives for quick and easy mounting.
See Page 3
MECHANICAL DIMENSIONS 642 SERIES
642 THERMAL PERFORMANCE
Case-to-Ambient Thermal Resistance, C/W
Performance shown is with T4 thermal adhesive applied.
Approach Velocity, LFM
200 300 400 500 600
14
12
10
8
6
4
2
0
642-25-T4
642-45-T4
642-60-T4
642-35-T4
Dimensions: in. (mm)
660 SERIES
642 SERIES
Integrated Circuit
Heat Sinks
7
Omnidirectional Pin Fin Heat Sink for Limited Height BGAs
Standard Base Dimensions Height Typical Heat Sink Weight
P/N in. (mm) in. (mm) Applications Finish lbs. (grams)
662-15AG 1.713 (43.5) sq 0.150 (3.8) 45mm BGA Gold Iridite 0.019 (8.50)
662-15AB 1.713 (43.5) sq 0.150 (3.8) 45mm BGA Black Anodized 0.019 (8.50)
Notes: 1. Optional factory preapplied pressure-sensitive adhesive. See Page 3
Dimensions: in. (mm)
MECHANICAL DIMENSIONS NATURAL AND FORCED
CONVECTION CHARACTERISTICS
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
Omnidirectional Pin Fin Heat Sink for BGAs
Standard Base Dimensions Dimensions “A” Typical Heat Sink Weight
P/N in. (mm) in. (mm) Applications Finish lbs. (grams)
628-20AB 1.750 (44.5) x 1.700 (43.2) 0.200 (5.1) 45mm BGA Black Anodized 0.031 (14.17)
628-25AB 1.750 (44.5) x 1.700 (43.2) 0.250 (6.4) 45mm BGA Black Anodized 0.038 (17.01)
628-35AB 1.750 (44.5) x 1.700 (43.2) 0.350 (8.9) 45mm BGA Black Anodized 0.044 (19.84)
628-40AB 1.750 (44.5) x 1.700 (43.2) 0.400 (10.2) 45mm BGA Black Anodized 0.050 (22.68)
628-65AB 1.750 (44.5) x 1.700 (43.2) 0.650 (16.5) 45mm BGA Black Anodized 0.056 (25.51)
Notes: 1. Optional factory preapplied pressure-sensitive adhesive. See Page 3
MECHANICAL DIMENSIONS NATURAL CONVECTION CHARACTERISTICS
FORCED CONVECTION CHARACTERISTICS
KEY: 628-20AB 628-25AB 628-35AB 628-40AB 628-65AB
Dimensions: in. (mm)
662 SERIES
628 SERIES
Integrated Circuit
Heat Sinks
8
Omnidirectional Pin Fin Heat Sink for BGAs
Fin Height
Standard Base Dimensions “A” Typical Weight
P/N in. Sq. in. (mm) Applications lbs. (grams)
630-25AB 1.378 (35) .250 (6.4) 35mm BGA .009 (4.09)
630-35AB 1.378 (35) .350 (8.9) 35mm BGA .011 (4.99)
630-45AB 1.378 (35) .450 (11.4) 35mm BGA .015 (6.81)
630-60AB 1.378 (35) .600 (15.2) 35mm BGA .026 (11.80)
Material: Aluminum, Black Anodized
The 630 Series is an omnidirectional pin fin heat sink for both natural and
forced-convection applications.
Applications include network routers and switches, high-resolution printers,
digital cameras, consumer video games, digital video disks (DVD) and global
positioning systems (GPS).
PRODUCT FEATURES
•Available in four standard heights, .25 inch, .35 inch, .45 inch, and .60
inch.
•Available with pressure sensitive adhesives for quick and easy mounting.
See Page 3
630 SERIES
630 THERMAL PERFORMANCE
Dimensions: in.
MECHANICAL DIMENSIONS
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
Omnidirectional Pin Fin Heat Sink For BGAs
Standard Base Dimensions Dimensions “A” Typical Heat Sink Weight
P/N in. (mm) in. (mm) Applications Finish lbs. (grams)
698-40AB 2.100 (53.3) sq. 0.400 (10.2) sq. 45mm BGA Black Anodized 0.075 (34.02)
698-65AB 2.100 (53.3) sq. 0.650 (16.5) sq. 45mm BGA Black Anodized 0.119 (53.86)
698-80AB 2.100 (53.3) sq. 0.800 (20.3) sq. 45mm BGA Black Anodized 0.125 (56.70)
698-100AB 2.100 (53.3) sq. 1.000 (25.4) sq. 45mm BGA Black Anodized 0.144 (65.20)
Dimensions: in. (mm)
MECHANICAL DIMENSIONS FORCED CONVECTION THERMAL PERFORMANCE DATA
(FLOW PARALLEL TO EXTRUSION DIRECTION)
KEY: 698-40AB 698-65AB 698-80AB 698-100AB
Notes: 1. Optional factory preapplied pressure-sensitive adhesive. See Page 3
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
630 SERIES
698 SERIES
Integrated Circuit
Heat Sinks
9
Pin Fin Heat Sink for BGAs
Standard Base Dimensions Dimensions “A” Typical Heat Sink Weight
P/N in. (mm) in. (mm) Applications Finish lbs. (grams)
798-40AB 2.100 (53.3) x 1.860 (47.2) 0.400 (10.2) 45mm BGA Black Anodized 0.063 (28.35)
798-65AB 2.100 (53.3) x 1.860 (47.2) 0.650 (16.5) 45mm BGA Black Anodized 0.106 (48.19)
798-80AB 2.100 (53.3) x 1.860 (47.2) 0.800 (20.3) 45mm BGA Black Anodized 0.113 (51.03)
798-100AB 2.100 (53.3) x 1.860 (47.2) 1.000 (25.4) 45mm BGA Black Anodized 0.131 (59.53)
Dimensions: in. (mm)
MECHANICAL DIMENSIONS FORCED CONVECTION THERMAL PERFORMANCE DATA
(FLOW PARALLEL TO EXTRUSION DIRECTION)
KEY: 798-40AB 798-65AB 798-80AB 798-100AB
Notes:
1 . Heat sink mounting surface flatness: 0.004" TIR
2. Optional factory preapplied pressure-sensitive adhesive. See Page 3
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
Omnidirectional Pin Fin Heat Sink for BGAs
MECHANICAL DIMENSIONS
643-35AP SERIES 643 THERMAL PERFORMANCE
Standard Base Dimensions Fin Height Typical Weight
P/N in. (mm) in. (mm) Applications lbs. (grams)
643-35AP 1.60 (40.64) x 1.10 (27.94) 0.350 (8.89) 40 mm BGA .070 (31.78)
Material: Aluminum, Plain Finish
Dimensions: in.
919541 Series Heat Sink Thermal Performance
Case-to-Ambient Thermal Resistance, C/W
Performance shown is with S5 interface material applied.
Approach Air Velocity, LFM
0 100 200 300 400 500 600 700
0
1
2
3
4
5
6
7
8
9
10
The Series 643-35AP is an omnidirectional pin fin heat sink for both natural
and forced-convection applications designed to fit a 40 mm BGA.
Applications include network routers and switches, high-resolution printers,
digital cameras, consumer video games, digital video disks (DVD) and global
positioning systems (GPS).
PRODUCT FEATURES
•Available with pressure sensitive adhesives to ensure good thermal
performance. See page 3
•Can be ordered with the 829SC clip. Order clip separately.
(Clip cannot be purchased without heat sink)
798 SERIES
643 SERIES
Integrated Circuit
Heat Sinks
10
DELTEM™COMPOSITE HEAT SINKS FOR BGAs
Pin Fin Heat Sink
Standard Base Dimensions Height Weight
P/N in. (mm) in. (mm) lbs. (grams)
D10650-40 0.650 (16.5) sq 0.400 (10.2) 0.004 (1.91)
Notes: Available with pressure sensitive adhesives for quick and easy mounting. See Page 3
Pin Fin Heat Sink
Standard Base Dimensions Height Typical Weight
P/N in. (mm) in. (mm) Applications lbs. (grams)
D10850-40 0.850 (21.6) sq 0.400 (10.2) 21mm BGA 0.006 (3.9)
Notes: Available with pressure sensitive adhesives for quick and easy mounting. See Page 3
MECHANICAL DIMENSIONS
NATURAL AND FORCED
CONVECTION CHARACTERISTICS
NATURAL AND FORCED
CONVECTION CHARACTERISTICS
DELTEM™ D10850-40 PIN FIN HEAT SINK
DELTEM™ D10650-40 PIN FIN HEAT SINK
Dimensions: in. (mm)
0
20
40
60
80
100
0 200 400 600 800 1000
AIR VELOCITY (LFM)
HEAT SINK TEMPERATURE RISE
ABOVE AMBIENT AIR (C)
0
5
10
15
20
25
30
0
HEAT DISSIPATED (WATTS)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0.25 1.25 1.000.75 0.50
0
20
40
60
80
100
02004006008001000
AIR VELOCITY (LFM)
HEAT SINK TEMPERATURE RISE
ABOVE AMBIENT AIR (C)
0
HEAT DISSIPATED (WATT S)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0.25 1.25 1.000.75 0.50
0
2
4
6
8
10
12
14
16
Deltem™ D10650-40
Deltem™ D10850-40
Integrated Circuit
Heat Sinks
11
Pin Fin Heat Sink/Clip Assembly for BGAs and PowerPC™ Packages
Standard Base Dimensions Dimensions “A” Typical Heat Sink Weight
P/N in. (mm) in. (mm) Applications Finish lbs. (grams)
609-50AB 2.895 (73.5) x 2.000 (50.8) 0.500 (12.7) 40&45mm BGA Black Anodized 0.094 (42.5)
609-100AB 2.808 (71.32) x 1.700 (43.2) 1.00 (25.4) 40&45mm BGA Black Anodized 0.130 (59.0)
Note: Optional factory preapplied thermal interface material.
S3 (Bergquist Q-Pad 3, 0.14 °C in2/w)
S4 (Bergquist Softface, 0.07 °C in2/w)
Dimensions: in. (mm)
MECHANICAL DIMENSIONS
609-50AB HEAT SINK
AND CLIP ASSEMBLY
(609-50AB)
THERMAL RESISTANCE
SINK TO AMBIENT (°C/WATT)
AIR VELOCITY (LFM)
609-50AB
609-100AB
10100 200 300 400 500
2
3
4
5
FORCED CONVECTION THERMAL PERFORMANCE DATA
(FLOW PARALLEL TO EXTRUSION DIRECTION)
Fan Heat Sink for BGA and PowerPC™ Packages
Standard Base Dimensions Height Typical Heat Sink Thermal Weight
P/N in. (mm) in. (mm) Applications Finish Performance lbs. (grams)
61995AB124D1 2.871 (72.92) x 1.98 (50.29) 0.953 (24.21) 40&45mm BGA Black Anodized 1.2° C/W .150 (68.10)
61995AB054D1 2.871 (72.92) x 1.98 (50.29) 0.953 (24.21) 40&45mm BGA Black Anodized 1.2° C/W .150 (68.10)
Note: Optional factory preapplied thermal interface material. See 609 series.
MECHANICAL DIMENSIONS
619 95 AB 124 D1 S3
Thermal Interface Material Option
Blank None
S3 Bergquist Qpad 3
S4 Bergquist Softface
Connector
Daisy Chain 2 Wire
Fan Voltage
124 12 volt
054 5 volt
Series Number = 619
Height
95 .95 in
Material Finish
AB= Aluminum Black Anodized
S5 Chomerics T710
S6 Chomerics T443
S7 Power Devices
Thermostrate AL-S
S8 Berquist, HI-Flow 2004
FEATURES AND BENEFITS:
• Captivated clips for ease of assembly
• Low acoustic noise
• Impingement air flow
• Accommodates BGA packages up to 45 mm in size
(609-100AB)
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
*
*Performance is for shrouded conditions. 609-100
will perform better than 609-50 in cases with bypass.
Designed to fit a .063” thick PCB
electronic package thickness of .110”
Dimensions: in. See 609 Series for PCB hole layout for clip attachment
609 SERIES
619 SERIES
Integrated Circuit
Heat Sinks
12
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
MECHANICAL DIMENSIONS
602 THERMAL PERFORMANCE
MECHANICAL DIMENSIONS
604 THERMAL PERFORMANCE
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
2
4
6
8
10
12
14
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
604-40AB
604-60AB
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
8
9
10
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
610-35AB
610-40AB
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AB (dashed)
614-50AB
0
1
2
3
4
5
6
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AP (dashed)
614-50AB
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
2
4
6
8
10
12
14
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
604-40AB
604-60AB
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
8
9
10
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
610-35AB
610-40AB
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AB (dashed)
614-50AB
0
1
2
3
4
5
6
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AP (dashed)
614-50AB
Unidirectional Fin Heat Sink for BGAs
Omnidirectional Pin Fin Heat Sink for BGAs
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
602-100AP .750 (19.1) sq 1.000 (25.4) Plain .021 (9.59)
Material: Aluminum, Plain Finish
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
604-40AB .850 (21.6) sq .400 (10.2) Black Anodized .012 (5.60)
604-60AB .850 (21.6) sq .600 (15.2) Black Anodized .016 (7.47)
Material: Aluminum, Black Anodized
602 SERIES
604 SERIES
Integrated Circuit
Heat Sinks
13
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
MECHANICAL DIMENSIONS
605 THERMAL PERFORMANCE
MECHANICAL DIMENSIONS
606 THERMAL PERFORMANCE
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
2
4
6
8
10
12
14
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
604-40AB
604-60AB
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
8
9
10
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
610-35AB
610-40AB
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AB (dashed)
614-50AB
0
1
2
3
4
5
6
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AP (dashed)
614-50AB
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
2
4
6
8
10
12
14
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
604-40AB
604-60AB
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
8
9
10
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
610-35AB
610-40AB
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AB (dashed)
614-50AB
0
1
2
3
4
5
6
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AP (dashed)
614-50AB
Unidirectional Fin Heat Sink for BGAs
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
605-75AB .880 (22.4) sq .750 (19.1) Black Anodized .030 (13.5)
Material: Aluminum, Black Anodized
Unidirectional Fin Heat Sink for BGAs
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
606-77AB 1.185 (30.1) sq .767 (19.5) Black Anodized .041 (18.7)
Material: Aluminum, Black Anodized
605 SERIES
606 SERIES
Integrated Circuit
Heat Sinks
14
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
MECHANICAL DIMENSIONS
607 THERMAL PERFORMANCE
MECHANICAL DIMENSIONS
610 THERMAL PERFORMANCE
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
2
4
6
8
10
12
14
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
604-40AB
604-60AB
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
8
9
10
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
610-35AB
610-40AB
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AB (dashed)
614-50AB
0
1
2
3
4
5
6
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AP (dashed)
614-50AB
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
2
4
6
8
10
12
14
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
604-40AB
604-60AB
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
8
9
10
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
610-35AB
610-40AB
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AB (dashed)
614-50AB
0
1
2
3
4
5
6
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AP (dashed)
614-50AB
Unidirectional Fin Heat Sink for BGAs
Omnidirectional Pin Fin Heat Sink for BGAs
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
607-65AB 1.200 (30.5) x 1.105 (28.1) .650 (16.5) Black Anodized .041 (18.7)
Material: Aluminum, Black Anodized
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
610-35AB 1.240 (31.5) sq .350 (8.9) Black Anodized .022 (10.0)
610-40AB 1.240 (31.5) sq .400 (10.2) Black Anodized .024 (10.8)
Material: Aluminum, Black Anodized
607 SERIES
610 SERIES
Integrated Circuit
Heat Sinks
15
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
MECHANICAL DIMENSIONS
611 THERMAL PERFORMANCE
MECHANICAL DIMENSIONS
612 THERMAL PERFORMANCE
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
2
4
6
8
10
12
14
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
604-40AB
604-60AB
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
8
9
10
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
610-35AB
610-40AB
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AB (dashed)
614-50AB
0
1
2
3
4
5
6
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AP (dashed)
614-50AB
0
1
2
3
4
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
Unidirectional Fin Heat Sink for BGAs
Unidirectional Fin Heat Sink for BGAs
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
611-80AB 1.200 (30.5) sq .800 (20.3) Black Anodized .036 (16.3)
Material: Aluminum, Black Anodized
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
612-65AB 1.390 (35.3) sq .650 (16.5) Black Anodized .054 (24.5)
Material: Aluminum, Black Anodized
611 SERIES
612 SERIES
Integrated Circuit
Heat Sinks
16
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
MECHANICAL DIMENSIONS
613 THERMAL PERFORMANCE
MECHANICAL DIMENSIONS
614 THERMAL PERFORMANCE
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
2
4
6
8
10
12
14
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
604-40AB
604-60AB
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
8
9
10
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
610-35AB
610-40AB
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AB (dashed)
614-50AB
0
1
2
3
4
5
6
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AP (dashed)
614-50AB
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
2
4
6
8
10
12
14
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
604-40AB
604-60AB
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
8
9
10
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
610-35AB
610-40AB
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AB (dashed)
614-50AB
0
1
2
3
4
5
6
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
614-30AB
614-100AP (dashed)
614-50AB
Unidirectional Fin Heat Sink for BGAs
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
613-50AB 1.450 (36.8) sq .500 (12.7) Black Anodized .046 (20.8)
Material: Aluminum, Black Anodized
Unidirectional Fin Heat Sink for BGAs
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
614-30AB 1.500 (38.1) sq .300 (7.6) Black Anodized .030 (13.8)
614-50AB 1.500 (38.1) sq .500 (12.7) Black Anodized .048 (21.8)
614-100AP 1.500 (38.1) sq 1.000 (25.4) Plain .046 (20.9)
Material: Aluminum, Black Anodized or Plain
614 SERIES
613 SERIES
Integrated Circuit
Heat Sinks
17
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
MECHANICAL DIMENSIONS
615 THERMAL PERFORMANCE
MECHANICAL DIMENSIONS
616 THERMAL PERFORMANCE
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
618-100AB
618-20AB
0
1
2
3
4
5
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
618-100AB
618-20AB
0
1
2
3
4
5
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
Unidirectional Fin Heat Sink for BGAs
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
615-41AB 1.600 (40.6) sq .410 (10.4) Black Anodized .046 (21.0)
Material: Aluminum, Black Anodized
Unidirectional Fin Heat Sink for BGAs
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
616-80AB 1.85 (47.0) sq .800 (20.3) Black Anodized .054 (24.5)
Material: Aluminum, Black Anodized
616 SERIES
615 SERIES
Integrated Circuit
Heat Sinks
18
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
MECHANICAL DIMENSIONS
617 THERMAL PERFORMANCE
MECHANICAL DIMENSIONS
618 THERMAL PERFORMANCE
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
618-100AB
618-20AB
0
1
2
3
4
5
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
618-100AB
618-20AB
0
1
2
3
4
5
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
Unidirectional Fin Heat Sink for BGAs
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
617-80AB 1.450 (36.8) x 1.850 (47.0) .800 (20.3) Black Anodized .082 (37.2)
Material: Aluminum, Black Anodized
Unidirectional Fin Heat Sink for BGAs
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
618-20AB 2.00 (50.8) sq .200 (5.1) Black Anodized .046 (21.0)
618-100AP 2.00 (80.8) sq 1.000 (25.4) Plain .122 (55.5)
Material: Aluminum, Black Anodized or Plain
618 SERIES
617 SERIES
Integrated Circuit
Heat Sinks
19
HEAT SINKS FOR BGAs, SUPER BGAs, PBGAs, and FPBGAs
MECHANICAL DIMENSIONS
620 THERMAL PERFORMANCE
MECHANICAL DIMENSIONS
622 THERMAL PERFORMANCE
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
618-100AB
618-20AB
0
1
2
3
4
5
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
4
5
6
7
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
618-100AB
618-20AB
0
1
2
3
4
5
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
0
1
2
3
100 200 300 400 500 600 700
AIR VELOCITY (LFM)
THERMAL RESISTANCE SINK TO
AMBIENT (C)
Unidirectional Fin Heat Sink for BGAs
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
620-24AB 2.500 (63.5) x 2.000 (50.8) .235 (6.0) Black Anodized .063 (28.6)
Material: Aluminum, Black Anodized
Unidirectional Fin Heat Sink for BGAs
Standard Base Dimensions Height Heat Sink Weight
P/N in. (mm) in. (mm) Finish lbs. (grams)
622-80AB 2.050 (52.1) x 2.000 (50.8) .800 (20.3) Black Anodized .123 (56.0)
Material: Aluminum, Black Anodized
620 SERIES
622 SERIES
Integrated Circuit
Heat Sinks
20
HEAT SINKS FOR MICROPROCESSORS AND ASICs
Heat Sinks & Clip for Intel’s Pentium, Pentium MMX, AMD’s K6 & K62, CYRIX’s 6x86 & Media GX,
Centaur/IDT’s WinChip C6
Fin Thermal Resistance Interface
Standard Base Dimensions Height at 200 LFM Material
P/N in. (mm) in. (mm) (°C/W) Options
569-100AK 2.34 (59.44) x 2.68 (67.95) 1.00 (25.4) 1.7 Pages 74–76
579-150AK 2.15 (54.71) x 1.95 (49.53) 1.50 (38.10) 1.6 Pages 74–76
589-150AK 2.15 (54.71) x 3.10 (78.74) 1.50 (38.10) 1.5 Pages 74–76
599X-100AB 1.96 (49.78) x 2.67 (67.95) 1.00 (25.4) 1.9 Pages 74–76
Material: Aluminum, Black Anodized
PRODUCT FEATURES
•Compact design heat sinks can comfortably fit a variety of Robust Socket 7-based PC boxes
•Robust clip attachments
•Clips are not captive to sink
•To order heat sink with optional interface material pre-applied at the factory,
add S4 or S5 suffix to the part number. (See Product Designation)
MECHANICAL DIMENSIONS
569-100AK SERIES
Dimensions: in.
Low-Cost Heat Sinks for DIPs and SRAMs 14-16 Pin DIPs
Standard Length Width Height Typical Weight
P/N in. (mm) in. (mm) in. (mm) Applications lbs. (grams)
650B 0.250 (6.4) 0.740 (18.9) 0.240 (6.1) 14-Pin, 16-Pin DIP 0.003 (1.36)
651B 0.750 (19.1) 0.415 (10.5) 0.240 (6.1) 14-Pin, 16-Pin DIP 0.005 (2.27)
These extruded heat sinks serve as low-cost heat dissipation solutions for DIPs
with pin counts from 14 to 16. Use an epoxy such as Wakefield Engineering
DeltaBond™ 152 or 155, or use Wakefield 2-part DeltaBond™ 156 modified
acrylic adhesive. The 650 and 651 are also available in natural aluminum finish.
They can be ordered as 650P or 651P.
MECHANICAL DIMENSIONS
650B 651B
NATURAL AND FORCED
CONVECTION CHARACTERISTICS
Notes:
1. Finish: black anodize
2. TIR: Total Indicator Read-
ing. This is a measure of
flatness across the greatest
dimension of a surface.
Dimensions: in. (mm)
RC01-1
Wakefield 5x9SC
SPRING CLIP OPTION
ROCKER CLIP OPTION
(SEE PRODUCT DES.) (SEE PRODUCT DES.)
OPTIONAL THERMAL INTERFACE
PAD (SEE PRODUCT DES.)
2.34 1.00 1.50
2.68
1.50
.23
.42
569 - 100 XX - XX
MODEL NUMBER
HEIGHT
100 = 1.00"
S4 = DELTALINK IV
THERMAL INTERFACE
BLANK = NO THERMAL PAD
CLIP
AK = SPRING CLIP
PRODUCT DESIGNATION
650/651 SERIES
569, 579, 589, 599 SERIES
Integrated Circuit
Heat Sinks
21
SpiderClip™ Heat Sink Assembly for IntelDX4™, AMD AM486DX2, and AM486DX4 17 x 17 SPGA
Dimensions “A” Base
Standard Base Dimensions Height Thickness Clip Standard Weight
P/N in. (mm) in. (mm) in. (mm) Color Finish lbs. (grams)
669-32AG 1.70 (43.2) sq 0.315 (8.0) 0.090 (2.3) Black Gold Iridite 0.044 (19.84)
669-33AB 1.70 (43.2) sq 0.315 (8.0) 0.090 (2.3) Black Black Anodized 0.044 (19.84)
669-40AB 1.70 (43.2) sq 0.400 (10.2) 0.090 (2.3) Black Black Anodized 0.044 (19.84)
669-52AB 1.70 (43.2) sq 0.520 (13.2) 0.090 (2.3) Black Black Anodized 0.050 (22.68)
661-32AG 1.70 (43.2) sq 0.315 (8.0) 0.090 (2.3) N/A Gold Iridite 0.044 (19.84)
661-33AB 1.70 (43.2) sq 0.315 (8.0) 0.090 (2.3) N/A Black Anodized 0.044 (19.84)
661-40AB 1.70 (43.2) sq 0.400 (10.2) 0.090 (2.3) N/A Black Anodized 0.044 (19.84)
661-52AB 1.70 (43.2) sq 0.520 (13.2) 0.090 (2.3) N/A Black Anodized 0.050 (22.68)
Dimensions:
in. (mm)
MECHANICAL
DIMENSIONS
NATURAL AND FORCED CONVECTION CHARACTERISTICS
669-32AG SPIDERCLIP™
ASSEMBLY
669-32AG 669-33AB
669-40AB
669-52AB
669-52AB SPIDERCLIP™
ASSEMBLY
Dielectric Breakdown (Nylon Clip Coating)
Dielectric Strength: 100 VDC/mil
Breakdown Voltage: 200 VDC (minimum)
HEAT SINKS FOR MICROPROCESSORS AND ASICs
669 SERIES
Heat Sink without clip
661 SERIES
669 Series SpiderClip™ Heat Sink Assemblies may be applied to the following:
• Intel 80486DX and 80486DX2™ (168 PGA) • Intel 82495 Cache Controller • Intel DX4™ (168 PGA)
• AMD AM29000 Microcontrollers • Intel 80486SX (168 PGA) and I860XR (208 PGA) • AMD AM486 Microprocessors AM486DX2, AM486DX4
• Intel I960CA, I960CF Enbedded Controllers
KEY:
669-32AG 0.315 (8.0) Pin Height, low density pin pattern
669-33AB 0.315 (8.0) Pin Height, high density pin pattern
669-40AB 0.400 (10.2) Pin Height, high density pin pattern
669-52AB 0.520 (13.2) Pin Height, high density pin pattern
SpiderClip™ Heat Sink Assembly for Motorola MC68040™, MC68060 18 x 18 PGA
Standard Base Dimensions Height Base Thickness Clip Heat Sink Weight
P/N in. (mm) in. (mm) in. (mm) Color Finish lbs. (grams)
649-33AB 1.70 (43.2) sq 0.315 (8.0) 0.090 (2.3) Gray Black Anodized 0.044 (19.84)
649-51AB 1.86 (47.2) sq 0.510 (13.0) 0.090 (2.3) Gray Black Anodized 0.056 (25.51)
MECHANICAL
DIMENSIONS
649-33AB SPIDERCLIP™
ASSEMBLY
649-51AB SPIDERCLIP™
ASSEMBLY
Dimensions: in. (mm)
NATURAL AND FORCED CONVECTION CHARACTERISTICS
649 SERIES