DS14C89A
DS14C89A Quad CMOS Receiver
Literature Number: SNLS081B
DS14C89A
Quad CMOS Receiver
General Description
The DS14C89A, pin-for-pin compatible to the DS1489A/
MC1489A, ia a quad receiver designed to interface data
terminal equipment (DTE) with data circuit-terminating
equipment (DCE). These devices translate levels conform-
ing to EIA-232E and CCITT V.28 standards to TTL/CMOS
logic levels.
The device is fabricated in low threshold CMOS metal gate
technology. The device provides very low power consump-
tion compared to their bipolar equivalents: 900 µA
(DS14C89A) versus 26 mA (DS1489A).
The DS14C89A provides on chip noise filtering which elimi-
nates the need for external response control filter capacitors.
When replacing the DS1489A with the DS14C89A, the re-
sponse control filter pins can be tied high, low, or not con-
nected.
Features
nMeets EIA/TIA-232-E and CCITT V.28 Standards
nFailsafe - Output High for Open Input
nLOW Power consumption
nOn chip noise filter
nAvailable in SOIC Package
Connection Diagram
01110601
Order Number DS14C89AN, DS14C89AM,
See NS Package Number M14A, N14A
May 1998
DS14C89A Quad CMOS Receiver
© 2004 National Semiconductor Corporation DS011106 www.national.com
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
V
CC
+6V
Input Voltage −30V to +30V
Receiver Output Voltage (V
CC
) +0.3V to
GND−0.3V
Junction Temperature +150˚C
Continuous Power Dissipation @+25˚C (Note 2)
N Package 1513 mW
M Package 1063 mW
Lead Temp.
(Soldering 4 seconds) +260˚C
Storage Temp. Range −65˚C to +150˚C
ESD Rating ≥1.8 kV, Typically ≥2kV
(HMB, 1.5 kΩ, 100 pF)
Recommended Operating
Conditions
Min Max Units
V
CC
(GND = 0V) +4.5 +5.5 V
Operating Free Air Temp. (T
A
)
DS14C89A 0 +75 ˚C
Electrical Characteristics
Over recommended operating conditions, unless otherwise specified
Symbol Parameter Conditions Min Typ Max Units
V
TH
Input High Threshold 1.3 2.7 V
V
TL
Input Low Threshold 0.5 1.9 V
V
HY
Typical Input Hysteresis 1.0 V
I
IN
Input Current V
IN
= +25V V
CC
= +4.5V to +5.5V 3.6 8.3 mA
V
IN
= −25V −3.6 −8.3 mA
V
IN
= +3V 0.43 1.0 mA
V
IN
= −3V −0.43 −1.0 mA
V
IN
= +15V V
CC
= 0V (Power-Off) 2.14 5.0 mA
V
IN
= −15V (Note 4) −2.14 −5.0 mA
V
IN
= +3V 0.43 1.0 mA
V
IN
= −3V −0.43 −1.0 mA
V
OH
Output High Voltage V
IN
=V
TL
(min) I
OUT
= −3.2 mA 2.8 4.0 V
I
OUT
= −20µA 3.5 4.7 V
V
OL
Output Low Voltage V
IN
=V
TH
(max) 0.15 0.4 V
I
OUT
= +3.2 mA
I
CC
Supply Current No Load, V
IN
= 2.7V or 0.5V 0.5 900 µA
AC Electrical Characteristics (Note 3)
Over recommended operating conditions, unless otherwise specified, C
I
=50pF
Symbol Parameter ConditIons Min Typ Max Units
t
PLH
Propagation Delay Low to High Input Pulse Width ≥10 µs 3.5 6.5 µs
t
PHL
Propagation Delay High to Low Input Pulse Width ≥10 µs 3.2 6.5 µs
t
SK
Typical Propagation Delay Skew 400 ns
t
r
Output Rise TIme 40 300 ns
t
f
Output Fall Time 40 300 ns
t
nw
Pulse Width assumed to be Noise 1.0 µs
Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices
should be operated at these limits. The tables of “Electrical Characteristics” specify conditions for device operation.
Note 2: Derate N Package 12.1 mW/˚C, and M Package 8.5 mW/˚C above +25˚C.
Note 3: AC input waveforms for test purposes: tr=t
f= 200 ns, VIH = +3V, VL=−3V,f=20KHz.
Note 4: Under the power-off supply conditions it is assumed that the power supply potential drops to zero (0V) and is replaced by a low impedance or short circuit
to ground.
DS14C89A
www.national.com 2
Physical Dimensions inches (millimeters) unless otherwise noted
Order Number DS14C89AM
NS Package Number M14A
Order Number DS14C89AN
NS Package Number N14A
DS14C89A
www.national.com 4
Notes
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
BANNED SUBSTANCE COMPLIANCE
National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products
Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification
(CSP-9-111S2) and contain no ‘‘Banned Substances’’ as defined in CSP-9-111S2.
National Semiconductor
Americas Customer
Support Center
Email: new.feedback@nsc.com
Tel: 1-800-272-9959
National Semiconductor
Europe Customer Support Center
Fax: +49 (0) 180-530 85 86
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
National Semiconductor
Asia Pacific Customer
Support Center
Email: ap.support@nsc.com
National Semiconductor
Japan Customer Support Center
Fax: 81-3-5639-7507
Email: jpn.feedback@nsc.com
Tel: 81-3-5639-7560
www.national.com
DS14C89A Quad CMOS Receiver
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic."Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products Applications
Audio www.ti.com/audio Communications and Telecom www.ti.com/communications
Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers
Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps
DLP®Products www.dlp.com Energy and Lighting www.ti.com/energy
DSP dsp.ti.com Industrial www.ti.com/industrial
Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical
Interface interface.ti.com Security www.ti.com/security
Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community Home Page e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright ©2011, Texas Instruments Incorporated
