15C01M
No.7505-1/4
NPN Epitaxial Planar Silicon Transistor
Applications
•Low-frequency Amplifier, muting circuit.
Features
•Large current capacitance.
•Low collector -to-emitter saturation voltage (resistance).
RCE (sat) typ.=0.58Ω [IC=0.7A, IB=35mA].
•Ultrasmall package facilitates miniaturization in end
products.
•Small ON-resistance (Ron).
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Collector-to-Base Voltage VCBO 20 V
Collector-to-Emitter Voltage VCEO 15 V
Emitter-to-Base Voltage VEBO 5V
Collector Current IC700 mA
Collector Current (Pulse) ICP 1.4 A
Collector Dissipation PCMounted on a glass epoxy board (20✕30✕1.6mm) 300 mW
Junction Temperature Tj 150 °C
Storage Temperature Tstg --55 to +150 °C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
Collector Cutoff Current ICBO VCB=15V, IE=0 0.1 µA
Emitter Cutoff Current IEBO VEB=4V, IC=0 0.1 µA
DC Current Gain hFE VCE=2V, IC=10mA 300 800
Gain-Bandwidth Product fTVCE=2V, IC=50mA 330 MHz
Output Capacitance Cob VCB=10V, f=1MHz 3.2 pF
Collector-to-Emitter Saturation Voltage VCE(sat) IC=200mA, IB=10mA 150 300 mV
Base-to-Emitter Saturation Voltage VBE(sat) IC=200mA, IB=10mA 0.9 1.2 V
Marking : YP Continued on next page.
Ordering number : ENN7505
15C01M
O3003 TS IM TA-3683
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Low-Frequency
General-Purpose Amplifier Applications
Package Dimensions
unit : mm
2059B
[15C01M]
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
1 : Base
2 : Emitter
3 : Collector
SANYO : MCP
0.3
0.65 0.65
2.0
0.425 1.250
2.1 0.425
0.15
0 to 0.1
0.2
0.3 0.6
0.9
12
3
15C01M
No.7505-2/4
Continued from preceding page. Ratings
Parameter Symbol Conditions min typ max Unit
Collector-to-Base Breakdown Voltage V(BR)CBO IC=10µA, IE=0 20 V
Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=1mA, RBE=∞15 V
Emitter-to-Base Breakdown Voltage V(BR)EBO IE=10µA, IC=0 5 V
T urn-ON T ime ton See specified Test Circuit. 30 ns
Storage T ime tstg See specified Test Circuit. 77 ns
Fall T ime tfSee specified Test Circuit. 40 ns
Switching Time Test Circuit
VRRB
VCC=5VVBE= --5V
++
50Ω
INPUT
OUTPUT
RL
220µF 470µF
PW=20µsIB1
D.C.≤1% IB2
IC=20IB1= --20IB2=500mA
1.0 23 57
10 23 57
100 23 57
1000
100
200
300
400
600
500
700
800
0 0.2 0.4 0.6 0.8 1.0 1.2
0
0 0.4 0.8 1.2 1.60.2 0.6 1.0 1.4 1.8 2.0
10
2
3
5
7
100
2
3
5
7
1000
3
5
7
100
2
3
5
7
1000
1.0 23 57
10 23 57
100 23 57
1000
IT05492 IT05493
IT05490 IT05491
0
40
80
120
160
200
20
60
100
140
180
IB=0
0.1mA
0.2mA
0.3mA
0.4mA
0.5mA
0.6mA
0.7mA
0.8mA
1.0mA
0.9mA
VCE=2V
VCE=2V IC / IB=20
Ta=75°C
Ta=75°C
25°C
--25°C
--25°C
25°C
Ta=75°C
--25°C
25°C
hFE -- IC
IC -- VCE IC -- VBE
VCE(sat) -- IC
Collector-to-Emitter Voltage, VCE -- V
Collector Current, IC -- mA
Base-to-Emitter Voltage, VBE -- V
Collector Current, IC -- mA
Collector Current, IC -- mA
DC Current Gain, hFE
Collector Current, IC -- mA
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- mV
15C01M
No.7505-3/4
1.0 23 57
10 23 57
100 23 57
1000
5
7
100
2
3
5
7
IT05496
VCE=2V
1.0 23 57
10 23 57
100 23 57
1000
100
2
3
5
7
1000
2
3
5
7
10000
IT05495
Ta= --25°C
75°C
25°C
IC / IB=20
fT -- IC
Collector Current, IC -- mA
Gain-Bandwidth Product, fT -- MHz
VBE(sat) -- IC
Collector Current, IC -- mA
Base-to-Emitter
Saturation Voltage, VBE(sat) -- mV
0
0
IT05499
50
100
200
150
250
300
350
4020 100 12060 80 140 160
Collector Dissipation, PC -- mW
Ambient Temperature, Ta -- °C
PC -- Ta
Mounted on a glass epoxy board(20✕30✕1.6mm)
1.0 23 57
10 23 57
100 23 57
1000
10
2
3
5
7
100
2
3
5
7
1000
IT05494
IC / IB=50
Ta=75°C
--25°C
25°C
0.1 23 57
1.0 23 57
10 23
1.0
2
3
5
7
10
IT05497
f=1MHz
Cob -- VCB
VCE(sat) -- IC
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- mV
Collector Current, IC -- mA
Output Capacitance, Cob -- pF
Collector-to-Base Voltage, VCB -- V
f=1MHz
0.1
0.1
IT06067
7
5
3
2
10
7
5
3
2
7
5
3
2
1.0
100
32 57 32 57
1.0 10
OUT
IN 1kΩ
1kΩ
IB
Ron -- IB
Base Current, IB -- mA
ON-resistance, Ron -- Ω
15C01M
No.7505-4/4
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of October, 2003. Specifications and information herein are subject
to change without notice.
PS
