This part is no longer available from Fox, please contact IDT for this product. Model: FVXO-HC53 SERIES HCMOS 5 x 3.2mm 3.3V V C X O Freq: 0.75 MHz to 250MHz Rev. 11/28/2007 Features XTREMELY Low Jitter Low Cost XPRESS Delivery Frequency Resolution to six decimal places Absolute Pull Range (APR) of 50ppm -20 to +70C or -40 to +85C operating temperatures Tri-State Enable / Disable Feature Industry Standard Package, Footprint & Pin-Out Fully RoHS compliant Gold over Nickel Termination Finish Serial ID with Comprehensive Traceability V DD VC Enable / Disable FOX X PRESSO Frequency Control Circuit OUTPUT ASICs Applications * * * * * * * * * ANY application requiring an oscillator SONET Ethernet Storage Area Network Broadband Access Microprocessors / DSP / FPGA Industrial Controllers Test and Measurement Equipment Fiber Channel GND For more information -- Click on the drawing Description The Fox XPRESSO Crystal Oscillator is a breakthrough in configurable Frequency Control Solutions. XPRESSO utilizes a family of proprietary ASICs, designed and developed by Fox, with a key focus on noise reduction technologies. The 3rd order Delta Sigma Modulator reduces noise to the levels that are comparable to traditional Bulk Quartz and SAW oscillators. The ASICs family has ability to select the output type, input voltages, and temperature performance features. With the XPRESS lead-time, low cost, low noise, wide frequency range, excellent ambient performance, XpressO is an excellent choice over the conventional technologies. Contents page Model Selection & Part Number Guide 2 Electrical Characteristic 3 Absolute Maximums 4 Output Wave Characteristics 4 Phase Noise 5 Jitter 5 Pin Assignment 6 Recommended Circuit 6 Reflow 6 Mechanical Drawing and Pad Layout 7 Tape and Reel Specification 8 Label 8 Traceability - LOT Number & Serial Identification 9 RoHS Material Declaration 10 SGS Report 11 & 12 Mechanical Test 13 Burn-In Test 13 MTTF / FITS calculations 14 15 Other XPRESSO Links Fox Contact Information 15 Finished XPRESSO parts are 100% final tested. FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 http://www.foxonline.com EMEA Tel/Fax: +44 .1767.312632 | Asia Hong Kong Tel: +852.2854.4285 Fax +852.2854.4282 Taiwan Tel: +886.2.22073427 Fax +886.2.22073486 | Japan Tel: +81.3.3374.2079 Fax: +81.3.3374.5221 (c) 2014 FOX ELECTRONICS | ISO9001:2008 Certified Page 1 of 15 This part is no longer available from Fox, please contact IDT for this product. FVXO-HC53 Series Model Selection Guide & Fox Part Number STEP #1: Customer selects the Model Description and provides to Fox Customer Service Model Description FVXO - H C 5 3 B R - 35.328 Frequency (in MHz) Resolutions to 6 places past the decimal point blank = -20C to +70C C = Ceramic H = HCMOS Q = Quartz L = LVDS P = LVPECL X = HCMOS (comp 2nd Output) 5 = 5 x 3.2mm 7 = 7 x 5mm 3 = 3.3 V 2 = 2.5 V R = -40C to +85C B = 50ppm Absolute Pull Range STEP #2: The Fox Customer Service team provides a customer specific Part Number for use on their Bill Of Materials (BOM). Fox Part Number (The assigned Fox Part Number must be on the BOM - not the above Model Description) (This will ensure receipt of the proper part) The 1st Field Product Code # 793 = FVXO-HC5 792 = FVXO-HC7 797 = FVXO-LC5 794 = FVXO-LC7 795 = FVXO-PC5 796 = FVXO-PC7 793-35.328-2 The 3rd Field Fox Internally Generated Number The 2nd Field The Customer's Frequency (If any specification changes, the last digits change) (The same specs for a different customer also changes the last digits) This example, FVXO-HC53BR-35.328 = Voltage Controlled, HCMOS Output, Ceramic, 5 x 3.2mm Package, 3.3V, 50 PPM Absolute Pull Range, -40 to +85C Temperature Range, at 35.328 MHz Absolute Maximum Ratings (Useful life may be impaired. Parameters Input Voltage Operating Temperature Storage Temperature Junction Temperature ESD Sensitivity Symbol VDD TAMAX TSTG HBM For user guidelines only, not tested) Condition Human Body Model Page 2 of 15 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified Maximum Value (unless otherwise noted) -0.5V to +5.0V -55C to +105C -55C to +125C 150C 1 kV This part is no longer available from Fox, please contact IDT for this product. FVXO-HC53 Series Electrical Characteristics Parameters Symbol Frequency Range Absolute Pull Range Note 1 FO APR TO Temperature Range Input Current (@ 15pF LOAD) IDD Output Load HCMOS Start-Up Time Output Enable / Disable Time Moisture Sensitivity Level Termination Finish (unless otherwise noted) Standard operating Optional operating Storage Standard 0.75 ~ 20 MHz 20+ ~ 50 MHz 50+ ~ 130 MHz 130+ ~ 200 MHz 200+ ~ 250 MHz Standard Operational To 125MHz TSTG VDD Supply Voltage Maximum Value Condition TS MSL JEDEC J-STD-20 0.750 to 250.000 MHz 50 ppm MIN -20C to +70C -40C to +85C -55C to +125C 3.3 V 5% 32 mA 35 mA 47 mA 55 mA 60 mA 15 pF 30 pF 10 mS 100 nS 1 Au Note 1 - Inclusive of 25C tolerance, operating temperature range, input voltage change, load change, aging, shock and vibration. Frequency Control (VC) Input -Parameters pin # 1 Symbol 1 Control Voltage Tuning Slope 2 Control Voltage Linearity Control Voltage Tuning Range Modulation Bandwidth Nominal Control Voltage Maximum Value Condition (unless otherwise noted) 2 0V to VDD LVC VC BW VCNOM 40 ~ 75 ppm/V Typ 10% 0V ~ 3.3V 10 kHz 1.65V @ f0 NOTES: 2 Actual slope is affected by frequency and accuracy settings. For an example of linearity, see the graph below. (The middle line represents the default Fox factory setting) FVXO Oscillator Pull @ 25C -- (range of typical responses) 150.0 100.0 Pull From Vc=1.65V (PPM) 1 50.0 0.0 -50.0 -100.0 -150.0 0.00 0.30 0.60 0.90 1.20 1.50 1.80 2.10 2.40 Vc = Voltage Applied to Pin # 1 Page 3 of 15 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified 2.70 3.00 3.30 This part is no longer available from Fox, please contact IDT for this product. FVXO-HC53 Series Output Wave Characteristics Parameters Symbol Output LOW Voltage VOL Output HIGH Voltage VOH Condition 0.75 to 150 MHz 150+ to 250 MHz 0.75 to 150 MHz 150+ to 250 MHz @ 50% VDD Level Output Symmetry (See Drawing Below) Output Enable (PIN # 2) Voltage VIH Output Disable (PIN # 2) Voltage VIL Cycle Rise Time (See Drawing Below) TR Cycle Fall Time (See Drawing Below) TF Maximum Value (unless otherwise noted) 10% VDD 20% VDD 90% VDD MIN 80% VDD MIN 45% ~ 55% > 70% VDD 0.75 to 150 MHz 150+ to 250 MHz 0.75 to 150 MHz 150+ to 250 MHz < 30% VDD 3 nS (10%~90%) 3 nS (20%~80%) 3 nS (90%~10%) 3 nS (80%~20%) If 30% to 70% times are used, Rise and Fall times change to 1.5 nS from 0.75 to 250MHz If 20% to 80% times are used, Rise and Fall times change to 2 nS from 0.75 to 150MHz Rise Time / Fall Time Measurements 10% to 90% 0V to VDD 30% to 70% 20% to 80% 90% - 10% 10% - 90% Rise Time 80 - 20 Times Fall Time Oscillator Symmetry Off Time 1/2 Period On Time 1/2 Period 50% VDD Period Ideally, Symmetry should be 50/50 -- Other expressions are 45/55 or 55/45 Page 4 of 15 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified 70 - 30 Times This part is no longer available from Fox, please contact IDT for this product. FVXO-HC53 Series Phase Noise Phase Noise Graph 0 dBc (dBc / Hz) vs. offset frequency -10dBc -20dBc -30dBc -40dBc Data Collected using HP 3048A Three Frequencies from Jitter Tables -50dBc -60dBc 156.25MHz -70dBc 62.5 MHz -80dBc -90dBc -100dBc -110dBc -120dBc 106.25 MHz -130dBc 62.5 MHz -140dBc 156.25MHz -150dBc 106.25 MHz -160dBc 10 100 1k 10k Offset Frequency 100k (10Hz to 40MHz) 1M 10M 40M Jitter is frequency dependent. Below are typical values at select frequencies. Phase Jitter & Time Interval Error (TIE) Frequency Phase Jitter TIE (12kHz to 20MHz) (Sigma of Jitter Distribution) 0.93 0.86 0.75 0.77 2.8 3.2 2.7 3.3 62.5 MHz 106.25 MHz 125 MHz 156.25 MHz Units pS RMS pS RMS pS RMS pS RMS Phase Jitter is integrated from HP3048 Phase Noise Measurement System; measured directly into 50 ohm input; VDD = 3.3V. TIE was measured on LeCroy LC684 Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software; VDD = 3.3V. Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications) Random & Deterministic Jitter Composition Frequency 62.5 MHz 106.25 MHz 125 MHz 156.25 MHz Random (Rj) Deterministic (Dj) 1.28 1.28 1.20 1.27 6.8 8.4 8.0 8.6 (pS RMS) (pS P-P) Total Jitter (Tj) (14 x Rj) + Dj 25.1 pS 26.6 pS 25.2 pS 26.6 pS Rj and Dj, measured on LeCroy LC684 Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software. Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications) Page 5 of 15 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified This part is no longer available from Fox, please contact IDT for this product. FVXO-HC53 Series Pin Description and Recommended Circuit Pin # Name 1 2 3 4 5 6 VC N. C. 2 1 2 E/D GND 1 2 3 Function Control Logic Ground Output Hi Z Power 1 E/D GND Output NOTES: VC Type VDD Frequency Control by changing voltage Enable / Disable Control of Output (0 = Disabled) Electrical Ground for VDD HCMOS Oscillator Output No Connection (Factory Use ONLY) Power Supply Source Voltage Includes pull-up resistor to VDD to provide output when the pin (2) is No Connect. Installation should include a 0.01F bypass capacitor placed between VDD (Pin 6) and GND (Pin 3) to minimize power supply line noise. 6 5 4 VDD 0.01 F VC #1 #6 E/D #2 #5 #3 #4 N. C. Output GND NC OUT HCMOS LOAD (15 pF) Terminations as viewed from the Top Enable / Disable Control Pin # 2 (state) Output (Pin # 4) OPEN (No Connection) "1" Level VIH > 70% VDD "0" Level VIL < 30% VDD ACTIVE Output ACTIVE Output High Impedance Soldering Reflow Profile (2 times Maximum at 260C for 10 seconds MAX) tp 260C 225C 25C 10 Seconds Max within 5C of 260C peak Ramp-Up 3C/s Max 5010 Seconds Above 225C Reflow Area 180C 160C VDD 120 20 Seconds In Pre-heating Area 400 Seconds MAX from +25C to 260C peak Page 6 of 15 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified Ramp Down Not to exceed 6C/s This part is no longer available from Fox, please contact IDT for this product. FVXO-HC53 Series Mechanical Dimensional Drawing & Pad Layout 5.15 Max #6 TOP VIEW #5 #4 X PRESS O #1 #2 3.35 Max Actual part marking is depicted. See Traceability (pg. 9) for more information #3 0.5 1.4 Max 2.54 1.27 #1 #6 #2 #5 #3 #4 1.2 0.64 Recommended Solder Pad Layout 2.54 0.8 1.29 2.25 1.27 1.24 Pin Connections #1) VC #4) Output #2) E/D #5) NC #3) GND #6) VDD Drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary Page 7 of 15 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified This part is no longer available from Fox, please contact IDT for this product. FVXO-HC53 Series Tape and Reel Dimensions 4.0mm O1.5mm 7.5mm 5.5mm 16mm 12mm 2.15mm 8.0mm 2k Reel Dimensions in mm 1k Reel Dimensions in mm 2.0 2.0 O13.0 O21.0 178.0 62.0 120 O21.0 O13.0 2.0 2.0 255.0 80.0 2.0 17.5 17.5 Labeling (Reels and smaller packaging are labeled with the below) 793-35.328-2 * Fox Part Number: 793-35.328-2 * Quantity: * Description: * Date Code * LOT # 2000 pieces FVXO-HC53BR-35.328 0745 FVXO-HC53BR-35.328 th (YYWW 2007 45 wk) 24435 If traceability should become necessary An additional identification code is contained internally if tracking should ever be necessary Page 8 of 15 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified This part is no longer available from Fox, please contact IDT for this product. FVXO-HC53 Series Traceability - LOT Number & Serial Identification LOT Number The LOT Number has direct ties to the customer purchase order. The LOT Number is marked on the "Reel" label, and also stored internally on non-volatile memory inside the XPRESSO part. XPRESSO parts that are shipped Tape and Reel, are also placed in an Electro Static Discharge (ESD) bag and will have the LOT Number labeled on the exterior of the ESD bag. It is recommended that the XPRESSO parts remain in this ESD bag during storage for protection and identification. If the parts become separated from the label showing the LOT Number, it can be retrieved from inside one of the parts, and the information that can be obtained is listed below: * * * * * Customer Purchase Order Number Internal Fox Sales Order Number Dates that the XPRESSO part was shipped from the factory The assigned customer part number The specification that the part was designed for Serial Identification The Serial ID is the individualized information about the configuration of that particular XPRESSO part. The Serial ID is unique for each and every XPRESSO part, and can be read by special Fox equipment. With the Serial ID, the below information can be obtained about that individual, XPRESSO part: * * * * * * * Equipment that the XPRESSO part was configured on Raw material used to configure the XPRESSO part Traceability of the raw material back to the foundries manufacturing lot Date and Time that the part was configured Any optimized electrical parameters based on customer specifications Electrical testing of the actual completed part Human resource that was monitoring the configuration of the part Fox has equipment placed at key Fox locations World Wide to read the Lot Identification and Serial Number of any XPRESSO part produced and can then obtain the information from above within 24 hours Page 9 of 15 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified This part is no longer available from Fox, please contact IDT for this product. FVXO-HC53 Series RoHS Material Declaration Material Name Cover Base Kovar Ceramic + Metallization + Nickel Plating + Gold Plating Seal ring Crystal Content (mg) Content (CAS Number) Nickel (Ni) 1.890 3.09% 7440-02-0 Cobalt (Co) 1.113 1.82% 7440-48-4 Iron (Fe) 3.540 5.78% 7439-89-6 Alumina (Al2O3) 35.484 57.98% 1344-28-1 Silicon Oxide (SiO2) 1.733 2.83% 14808-60-7 Chromium Oxide (Cr2O3) 0.268 0.44% 1308-38-9 Molybdenum Oxide (MoO2) 0.364 0.59% 18868-43-4 Magnesium Oxide (MgO) 0.234 0.38% 1309-48-4 Calcium Oxide (CaO) 0.253 0.41% 1305-78-8 Tungsten (W) 6.290 10.28% 7440-33-7 Molybdenum (Mo) 0.195 0.32% 7439-98-7 Nickel (Ni) 0.810 1.32% 7440-02-0 Cobalt (Co) 0.203 0.33% 7440-48-4 Gold (Au) 0.281 0.46% 7440-57-5 Iron (Fe) 2.438 3.98% 7439-89-6 Nickel (Ni) 1.309 2.14% 7440-02-0 Cobalt (Co) 0.768 1.25% 7440-48-4 Silver (Ag) 1.191 1.95% 7440-22-4 Copper (Cu) 0.210 0.34% 7440-50-8 Aluminum (Al) 0.0021 0.00343% 7429-90-5 Silicon (Si) 0.950 1.55% 7440-21-3 Gold Gold (Au) 0.480 0.784% 7440-57-5 Adhesive Silver (Ag) 0.000210 0.000343% 7440-22-4 Epoxy 0.0000700 0.0001144% 1.170 1.91% silver solder Component Crystal Silicon Dioxide (SiO2) Electrode Silver (Ag) 0.019 0.0310% 7440-22-4 Nickel (Ni) 0.000159 0.000260% 7440-02-0 Silver (Ag) 0.00037 0.000605% 7440-22-4 Silicon (Si) 0.000125 0.000204% 7440-21-3 Adhesive TOTAL 61.196 Page 10 of 15 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified 100.00% 14808-60-7 This part is no longer available from Fox, please contact IDT for this product. FVXO-HC53 Series 3rd Party (SGS) Material Report Page 11 of 15 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified This part is no longer available from Fox, please contact IDT for this product. FVXO-HC53 Series 3rd Party (SGS) Material Report (continued) Page 12 of 15 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified This part is no longer available from Fox, please contact IDT for this product. FVXO-HC53 Series Mechanical Testing Parameter Mechanical Shock Mechanical Vibration High Temperature Burn-in Hermetic Seal Test Method Drop from 75cm to hardwood surface - 3 times 10~55Hz, 1.5mm amplitude, 1 Minute Sweep 2 Hours each in 3 Directions (X, Y, Z) Under Power @ 125C for 2000 Hours (results below) He pressure: 4 1 kgf / cm2 2 Hour soak 2,000 Hour Burn-In Burn-In Testing - under power 2000 Hours, 125C Page 13 of 15 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified This part is no longer available from Fox, please contact IDT for this product. FVXO-HC53 Series MTTF / FITS Calculations Products are grouped together by process for MTTF calculations. (All XpressO output and package types are manufactured with the same process) 360 (120 of each output type: HCMOS, LVDS, LVPECL) Number of Parts Tested: Number of Failures: 0 Test Temperature: 125C 2000 Number of Hours: MTTF was calculated using the following formulas: [1.] Device Hours (devhrs) = (number of devices) x (hours at elevated temperature in K) [2.] MTTF = [3.] FITS = Where: Label devhrs x af x 2 2 1 MTTF * 109 Name af Acceleration Factor Formula/Value eV 1 1 ( )x( - ) k t1 t2 eV Activation Energy 0.40 V k Bolzman's Constant 8.62 X 10-5 eV/K e t1 Operating Temperature (K) t2 Accelerated Temperature (K) Theta Confidence Level (60% industry standard) r Failures Number of failed devices 2 Chi-Square statistical significance for bivariate tabular analysis [table lookup] based on assumed (Theta - confidence) and number of failures (r) For zero failures (60% Confidence): 2 = 1.830 DEVICE-HOURS = 360 x 2000 HOURS = 720,000 ACCELERATION FACTOR = ( e 0.40 1 1 )x( - ) 8.625 298 398 = 49.91009 MTTF = 720,000 x 49.91009 x 2 = 15,607,065 Hours 1.833 Failure Rate = 1.833 = 6.41E-8 720,000 x 49.91009 x 2 FITS = Failure Rate *1E9 = 64 Page 14 of 15 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified This part is no longer available from Fox, please contact IDT for this product. FVXO-HC53 Series Notes : Other XPRESSO Links XPRESSO Brochure Crystal Oscillators HCMOS 5 x 3.2mm 3.3V XO 0.75 to 250MHz HCMOS 7 x 5mm 3.3V XO 0.75 to 250MHz LVPECL 5 x 3.2mm 3.3V XO 0.75 to 1.35GHz LVPECL 7 x 5mm 3.3V XO 0.75 to 1.35GHz LVDS 5 x 3.2mm 3.3V XO 0.75 to 1.35GHz LVDS 7 x 5mm 3.3V XO 0.75 to 1.35GHz Voltage Controlled Crystal Oscillators HCMOS 5 x 3.2mm 3.3V VCXO 0.75 to 250MHz HCMOS 7 x 5mm 3.3V VCXO 0.75 to 250MHz LVPECL 5 x 3.2mm 3.3V VCXO 0.75 to 1.35GHz LVPECL 7 x 5mm 3.3V VCXO 0.75 to 1.35GHz LVDS 5 x 3.2mm 3.3V VCXO 0.75 to 1.35GHz LVDS 7 x 5mm 3.3V VCXO 0.75 to 1.35GHz Main Website www.foxonline.com Patent Numbers: US 6,664,860, US 5,960,403, US 5,952,890; US 5,960,405; US 6,188,290; Foreign Patents: R.S.A. 98/0866, R.O.C. 120851; Singapore 67081, 67082; EP 0958652 China ZL 98802217.6, Malaysia MY-118540-A, Philippines 1-1998-000245, Hong Kong #HK1026079, Mexico #232179 US and Foreign Patents Pending XpressOTM Fox Electronics Contact Information Fox Hong Kong Fox Japan Tel: +852.2854.4285, Tel:+81.3.3374.2079, (USA)-Worldwide Headquarters Fax:+852.2854.4282 Fax: +81.3.3377.5221 Tel: 888-GET-2-FOX Email: www.foxonline.com/email.htm Email: www.foxonline.com/email.htm Fax:+1.239.693.1554 Fox EMEA Fox Taiwan Email: www.foxonline.com/email.htm Tel/Fax: +44 1283 568153 Outside US: +1.239.693.0099, Email: www.foxonline.com/email.htm Tel:+886-2-22073427, Fax:+886-2-22073486 Email: www.foxonline.com/email.htm The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no responsibility is assumed by Fox Electronics for inaccuracies. Page 15 of 15 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified