10/100 Base-T Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C
RoHS-54RoHS-65Insertion Return Loss Common Mode
Compliant Compliant
Data Turns EMI1LEDs 2BST Loss (dB MIN) Crosstalk Rejection Hipot
Part No. Part No. Rate Ratios
Fingers
(L/R) (dB MAX) 100Ω±15Ω(dB MIN) (dB MIN) (Vrms)
TX RX 1-65MHz 1-10MHz 10-30MHz 30-60MHz 60-80MHz 1-30MHz 30-60MHz 60-100MHz 1-50MHz 50-150MHz @60Hz 1 MIN
J00-0014 J00-0014NL 100BT 1CT:1 1CT:1 No None Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
J00-0042 J00-0042NL 100BT 1CT:1 1CT:1 No None No -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
J00-0045 J00-0045NL 100BT 1CT:1 1CT:1 No G/Y Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
J00-0046 J00-0046NL 100BT 1CT:1 1CT:1 No G/Y No -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
J00-0061 J00-0061NL 100BT 1CT:1 1CT:1 Yes None Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
J00-0064 J00-0064NL 100BT 1CT:1 1CT:1 Yes None No -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
J00-0065 J00-0065NL 100BT 1CT:1 1CT:1 Yes G/Y Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
J00-0066 J00-0066NL 100BT 1CT:1 1CT:1 Yes G/Y No -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
STARJACKTM
1x1 Tab-DOWN RJ45
www.pulseeng.com
Features and Benefits:
RoHS-5 peak wave solder temperature rating 235°C
RoHS-6 peak wave solder temperature rating 260°C
Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP
Electrical Performance Summary:
Meets IEEE 802.3 specification
350μH minimum OCL with 8mA bias current
High performance for Max EMI suppression for cost-conscious applications
Description:
10/100 Base-TX RJ45 1x1 Tab-DOWN 8-pin Integrated Magnetics Connector, designed to support high volume
cost-conscious consumer applications such as: ADSL modems, Cable modems, STB and Video on Demand.
NOTES:
1. For an explanation of EMI fingers, refer to the mechanical drawing page.
2. LEDs Left/Right: G=green, Y=yellow.
3. IEEE802.3i (10Base-T) standard does not require these parts to achieve
350μH minimum OCL with 8mA bias current for 10Base-T parts.
4. RoHS-5 - Product does not contain 5 out of the 6 banned substances specified in the RoHS
directive. Product contains lead in applications considered as solders.
5. RoHS-6 - Product does not contain 5 out of the 6 banned substances specified in the RoHS
directive. Some internal connections may contain lead in high temperature solder (solder alloys
containing more than 85% lead).
Mating Force Unmating Force Plug to Jack
Part Number (MAX) (MAX) Durability Retention (MIN)
J00 Series 5lbs./2.268kgs. 5lbs./2.268kgs. 750 Insertions 20lbs./9.072kgs.
RJ45 Durability Testing Rating
10 Base-T Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C
RoHS-54RoHS-65Insertion Return Loss Common Mode
Compliant Compliant Data Turns EMI1LEDs 2BST Loss (dB MIN) Crosstalk Rejection Hipot
Part No. Part No. Rate Ratios Fingers (L/R) (dB MAX) 100Ω±15Ω(dB MIN) (dB MIN) (Vrms)
TX RX 1-10MHz 1-10MHz 1-10MHz 5MHz @60Hz 1 MIN
J00-0025 3J00-0025 NL310BT 1CT:2.5 1CT:1 Yes None No -1 -15 -30 -25 1500
J00-0051 3J00-0051NL 310BT 1CT:2.5 1CT:1 Yes G/Y No -1 -15 -30 -25 1500
J00-0062 3J00-0062 NL310BT 1CT:2.5 1CT:1 No None No -1 -15 -30 -25 1500
J00-0063 3J00-0063NL 310BT 1CT:2.5 1CT:1 No G/Y No -1 -15 -30 -25 1500
NOTES: 1. Connector dimensions comply with FCC dimension requirements.
2. MSL - Moisture Sensitivity Level class limits = 1 to 5 (Highest: 1; Lowest: 5).
Part Shield Contact Housing MSL2
Number Material Finish Material Plating Area Solder Area3Material Specification Rating
J00 20-40m inches Nickel over Phosphor Nickel underplating and 120μ inches Sn90/Pb10
Series Brass 10-20m inches Brass Bronze selective gold plating 15μ inches over 50μ inches nickel Thermoplastic UL 94 V-0 1
RJ45 Material Specification
3. RoHS-6 parts are tin matte finish over nickel.
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 32181071 ••China 86 755 33966678 ••Taiwan 886 3 4643715
www.pulseeng.com J414.C (8/08)
STARJACKTM
1x1 Tab-DOWN RJ45
J00-00XX Series Mechanicals
LED Configuration
www.pulseeng.com
Patent Pending
Date Code
Country of Origin
JXXXXXXXX
TM
.545
13,84
LEFT LED
RIGHT LED
.640
16,26
.140
3,56 SHIELD PIN
.290
7,37
.
425
10,80
.020
0,51
.135
3,43
.020
0,51
.125
3,18 .010
0,25
.125
3,18
SIGNAL PINS
HOUSING POST
.850
21,59MAX
.350
8,89
.100
2,54
.120
3,05 .250
6,35
.100
2,54
.024
0,61
.398
10,11
.450
11,43
.620
15,75
.498
12,65
7531
86 42
.003
0,08
8X.035
0,89
2X.064
1,63
4X .040
1,02
2X .128
3,25
11
12 10
9
.193
4,90
.133
3,38
.050
1,27
FRONT
BACK
HOUSING POST
SHIELD PIN
.560
14,22
TOP OF PCB
TO BOTTOM
OF OPENING
.010
0,25
R 2.54
6,45
4X RMAX
.010
0,25
.660
16,76
Connector Marking
(An example - parts are marked on
the top or end surface as shown)
SIDE VIEW
Part Number
Location
Green / Yellow LED Specification - (LEDs without internal resistors)
Right LED
12
11
Left LED
9
10
Yellow 585 nm 2.5 V 2.1 V
Green 565 nm 2.5 V 2.2 V
Standard LED Wavelength Forward* V(MAX) (TYP)
* Assumes bias current = 20mA
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
USA 858 674 8100 ••Germany 49 7032 7806 0 ••Singapore 65 6287 8998 ••Shanghai 86 21 32181071 ••China 86 755 33966678 ••Taiwan 886 3 4643715
www.pulseeng.com J414.C (8/08)
STARJACKTM
1x1 Tab-DOWN RJ45
www.pulseeng.com
J00-00XX Series Electrical Schematics
TD+ 1
CT 4
TD- 2
RD+ 3
CT 5
RD- 6
7
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
1CT : 1
TRANSMIT
1CT : 1
RECEIVE
CABLE SIDE
PCB SIDE TO PHY
GND* 8
*Connecting pin 8 to Ground makes J00-0042/46/64/66
footprint compatible to J00-0014/45/61/65.
J00-0042/46/64/66 J00-0014/45/61/65
J00-0025/51/62/63
0.001mF
1CT : 1
RECEIVE
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
TD+ 1
CT 4
TD- 2
RD+ 3
CT 5
RD- 6
NC 7
8
1CT : 1
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
CHS
GROUND
75
75
75
75
NOTE: Connect CHS GND to PCB ground.
TD+ 1
CT 7
TD- 2
RD+ 3
CT 8
RD- 6
4
58
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
1CT : 2.5
TRANSMIT
1CT : 1
RECEIVE
CABLE SIDE
PCB SIDE TO PHY
www.pulseeng.com J414.C (8/08)
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2008. Pulse Engineering, Inc. All rights reserved.
For More Information:
Pulse Worldwide
Headquarters
12220 World Trade Dr.
San Diego, CA 92128
U.S.A.
www.pulseeng.com
TEL: 858 674 8100
FAX: 858 674 8262
Pulse South Asia
150 Kampong Ampat
#07-01/02
KA Centre
Singapore 368324
TEL: 65 6287 8998
FAX: 65 6280 0080
Pulse North Asia
No. 26
Kao Ching Rd.
Yang Mei Chen
Taoyuan Hsien
Taiwan, R. O. C.
32667
TEL: 886 3 4643715
FAX: 886 3 4641911
Pulse China
Headquarters
B402, Shenzhen Academy of
Aerospace Technology Bldg.
10th Kejinan Rd.
High-Tech Zone
Nanshan District
Shenzen, PR China 518057
TEL: 86 755 33966678
FAX: 86 755 33966700
Pulse North China
Room 1503
XinYin Building
No. 888 YiShan Rd.
Shanghai 200233
China
TEL: 86 21 32181071
FAX: 86 21 32181396
Pulse European
Headquarters
Einsteinstrasse 1
D-71083 Herrenberg
Germany
TEL: 49 7032 7806 0
FAX: 49 7032 7806 12
