AC- and DC-powered sensors with solid-state outputs
For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineering.com
Features
• Choose models for 10 to 30V dc or 24 to 250V ac operation
• DC models have bipolar solid-state outputs: one NPN (sinking) and one PNP
(sourcing)
• AC models have an SPST solid-state output rated for up to 3/4 amp with simple 2-
wire hookup
• All models have a rear panel sensitivity adjustment and light/dark operate switch
• DC models include Banner’s Alignment Indicating Device (AID™) system
• Choose models with integral 2 m (6.5') cable or Mini-style QD (quick-disconnect)
connector; 9 m (30') cables are also available
Opposed Mode Emitter (E) and Receiver (R) Models
OPPOSED
Infrared, 880 nm
Models Range Cable* Supply Voltage Output Type
SMA91E
60 m (200')
2 m (6.5')
10-250V ac/dc -
SMA91EQD 3-pin Mini QD
SM91R 2 m (6.5')
10-30V dc Bipolar NPN/PNP
SM91RQD 4-pin Mini QD
SM2A91R 2 m (6.5')
24-250V ac SPST SCR Solid-state 2-wire
SM2A91RQD 3-pin Mini QD
SMA91ESR
3 m (10')
2 m (6.5')
10-250V ac/dc -
SMA91ESRQD 3-pin Mini QD
SM91RSR 2 m (6.5')
10-30V dc Bipolar NPN/PNP
SM91RSRQD 4-pin Mini QD
SM2A91RSR 2 m (6.5')
24-250V ac SPST SCR Solid-state 2-wire
SM2A91RSRQD 3-pin Mini QD
* 9 m cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., SMA91E W/30).
A model with a QD connector requires a mating cable; see Quick-Disconnect Cables on page 10.
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to seri-
ous injury or death. This product does NOT include the self-checking redundant circuitry necessary to
allow its use in personnel safety applications. A sensor failure or malfunction can cause either an ener-
gized or de-energized sensor output condition.
VALU-BEAM® 912 Series
P/N 03467_web
Rev. F
4/11/2012
Retroreflective Mode Models
Visible Red, 650 nm
RETRO
Non-Polarized
P
POLAR RETRO
Polarized
Models Range†Cable* Supply Voltage Output Type
Non-Polarized
SM912LV
0.15 to 9 m (6" to 30')
2 m (6.5') 10-30V dc
Bipolar NPN/PNP
SM912LVQD 4-Pin Mini QD
SM2A912LV 2 m (6.5') 24-250V ac
SPST SCR Solid-state 2-Wire
SM2A912LVQD 3-Pin Mini QD
Polarized††
SM912LVAG
0.3 to 4.5 m (1' to 15')
2 m (6.5')
10-30V dc Bipolar NPN/PNP
SM912LVAGQD 4-Pin Mini QD
SM2A912LVAG 2 m (6.5')
24-250V ac SPST SCR Solid-state 2-Wire
SM2A912LVAGQD 3-Pin Mini QD
† Retroreflective range is specified using one model BRT-3 retroreflector (3" diameter). Actual sensing range may be more or less than
specified, depending upon the efficiency and reflective area of the retroreflector used.
†† Use polarized models when shiny objects will be sensed.
Diffuse Mode Models
DIFFUSE
Infrared, 880 nm
Models Range†Cable* Supply Voltage Output Type
SM912D
760 mm (30")
2 m (6.5')
10-30V dc Bipolar NPN/PNP
SM912DQD 4-Pin Mini QD
SM2A912D 2 m (6.5')
24-250V ac SPST SCR Solid-state 2-Wire
SM2A912DQD 3-Pin Mini QD
SM912DSR
380 mm (15")
2 m (6.5')
10-30V dc Bipolar NPN/PNP
SM912DSRQD 4-Pin Mini QD
SM2A912DSR 2 m (6.5')
24-250V ac SPST SCR Solid-state 2-Wire
SM2A912DSRQD 3-Pin Mini QD
VALU-BEAM® 912 Series
2 www.bannerengineering.com - tel: 763-544-3164 P/N 03467_web
Rev. F
Convergent Mode Models
CONVERGENT
VISIBLE RED
CONVERGENT
Visible Red or Infrared; see below
Models Range Cable* Supply Voltage Output Type
Visible Red 650 nm
SM912CV
38 mm (1.5")
Spot Size at Focus:
1.5 mm (0.06")
2 m (6.5')
10-30V dc Bipolar NPN/PNP
SM912CVQD 4-Pin Mini QD
SM2A912CV 2 m (6.5')
24-250V ac SPST SCR Solid-state 2-Wire
SM2A912CVQD 3-Pin Mini QD
Infrared 880 nm
SM912C
38 mm (1.5")
2 m (6.5')
10-30V dc Bipolar NPN/PNP
SM912CQD 4-Pin Mini QD
SM2A912C 2 m (6.5')
24-250V ac SPST SCR Solid-state 2-Wire
SM2A912CQD 3-Pin Mini QD
Glass Fiber Optic Individual Emitter or Receiver Models
GLASS FIBER
TWO SENSORS
Infrared, 880 nm
Use where the separation between emitting and receiving fibers is more than a few feet, or where it is inconvenient to run both fibers from
a single sensor. Watertight o-ring-sealed sensor/fiber interface.
Models Range Cable* Supply Voltage Output Type
SMA91EF
Range varies with fi-
ber used
2 m (6.5')
10-250V ac/dc –
SMA91EFQD 3-Pin Mini QD
SM91RF 2 m (6.5')
10-30V dc Bipolar NPN/PNP
SM91RFQD 4-Pin Mini QD
SM2A91RF 2 m (6.5')
24-250V ac SPST SCR Solid-state 2-Wire
SM2A91RFQD 3-Pin Mini QD
* 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., SMA91EF W/30).
A model with a QD connector requires a mating cable; see Quick-Disconnect Cables on page 10.
VALU-BEAM® 912 Series
P/N 03467_web
Rev. F
www.bannerengineering.com - tel: 763-544-3164 3
Glass Fiber Optic Models
GLASS FIBER
Infrared 880 nm
Watertight o-ring-sealed sensor/fiber interface.
Models Range Cable* Supply Voltage Output Type
SM912F
Range varies with
sensing mode and fi-
ber optics used
2 m (6.5')
10-30V dc Bipolar NPN/PNP
SM912FQD 4-Pin Mini QD
SM2A912F 2 m (6.5')
24-250V ac SPST SCR Solid-state 2-Wire
SM2A912FQD 3-Pin Mini QD
* 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., SM912F W/30).
A model with a QD connector requires a mating cable; see Quick-Disconnect Cables on page 10.
Dimensions
VALU-BEAM® 912 Series
4 www.bannerengineering.com - tel: 763-544-3164 P/N 03467_web
Rev. F
Specifications - DC Models
Supply Voltage and Current
10 to 30V dc at 20 mA maximum, exclusive of load;
except for SMA91E, ESR and EF emitters, which oper-
ate from 10 to 250V ac or dc
Supply Protection Circuitry
Protected against reverse polarity and transient voltag-
es
Output Configuration
Bipolar: One current sourcing (PNP) and one current
sinking (NPN) open-collector transistor
Output Rating
250 mA continuous, each output
Off-state leakage current: less than 10 microamps
Output saturation voltage: (PNP output) less than 1
volt at 10 mA and less than 2 volts at 250 mA
Output saturation voltage: (NPN output) less than
200 millivolts at 10 mA and less than 1 volt at 250 mA
Output Response Time
Receivers only: 8 milliseconds ON and 4 milliseconds
OFF, independent of signal strength.
All other models: 4 milliseconds ON/OFF
NOTE: millisecond delay on power-up; outputs do not
conduct during this delay.
Repeatability
Opposed and Glass Fiber Optic Emitter-Receiver
pairs: 1.0 millisecond
Retro, Diffuse, Convergent and Glass Fiber Optic
Models: 1.3 milliseconds
Adjustments
Light/Dark Operate select switch and Sensitivity control
potentiometer, both located at rear of sensor
Indicators
Alignment Indicating Device (AID™) lights a top-moun-
ted red LED indicator whenever the sensor sees a
“light” condition; its pulse rate is proportional to the light
signal strength (the stronger the signal, the faster the
pulse rate).
Model SMA91E and SM91ESR emitters: visible-red
“tracer beam” indicates “Power ON” and enables line-
of-sight alignment.
Construction
Reinforced thermoplastic polyester housing, totally en-
capsulated, molded acrylic lenses and stainless steel
hardware
Environmental Rating
Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 12 and 13
IEC IP66
Connections
PVC-jacketed 2 m (6.5') or 9 m (30') cables or 4-pin
Mini-style quick-disconnect (QD) fitting available.
NOTE: Opposed-mode emitters use 3-pin Mini-style
QD fitting. See Quick-Disconnect Cables on page 10.
Operating Conditions
Temperature: -20° to +70° C (-4° to +158° F)
Maximum relative humidity: 90% at 50° C (non-con-
densing)
Certifications
DC Hookups
Emitters - Cabled Emitters - QD (3-Pin Mini-Style)
3-Pin Mini-Style Pinout (Cable Connector
Shown)
bn
bu
+
–
10-250V ac/dc
bn
bk
bu 10-250V ac/dc
+
–
2
3
1
1 = Black
2 = Brown
3 = Blue
VALU-BEAM® 912 Series
P/N 03467_web
Rev. F
www.bannerengineering.com - tel: 763-544-3164 5
Other DC Models - Cabled
Other DC Models - QD (4-Pin Mini-
Style)
4-Pin Mini-Style Pinout (Cable Connector
Shown)
bn
wh
bu
+
–
bk Load
Load
10-30V dc
bn
wh
bu
+
–
bk Load
Load
10-30V dc
4
3
1
2
1 = Brown
2 = White
3 = Blue
4 = Black
Specifications - AC Models
Supply Voltage and Current
24 to 250V ac (50/60 Hz);
except for SMA91E, ESR and EF emitters, which oper-
ate from 10 to 250V ac or dc
Supply Protection Circuitry
Protected against transient voltages
Output Configuration
SPST SCR solid-state relay with either normally closed
or normally open contact (light/dark operate selecta-
ble); 2-wire hookup
Output Rating
Minimum load current 10 mA, max. steady-state load
capability 750 mA to 50° C ambient (122° F), 500 mA
to 70° C ambient (158° F)
Inrush capability: 4 amps for 1 second (non-repeti-
tive)
Off-state leakage: current less than 1.7 mA rms
On-state voltage drop: ≤ 5 volts rms at 750 mA load,
≤ 10 volts rms at 15 mA load
Output Protection Circuitry
Protected against false pulse on power-up
Output Response Time
Receivers only: 8 milliseconds ON and 4 milliseconds
OFF, independent of signal strength.
All other models: 4 milliseconds ON/OFF
OFF time does not include load response of up to 1/2
ac cycle (8.3 milliseconds).
Response time specification of the load should be con-
sidered when total response time is important.
NOTE: millisecond delay on power-up; outputs do not
conduct during this delay.
Repeatability
Opposed and Glass Fiber Optic Emitter-Receiver
pairs: 1.0 millisecond
Retro, Diffuse, Convergent and Glass Fiber Optic
Models: 2.6 milliseconds
Adjustments
Light/Dark Operate select switch and Sensitivity control
potentiometer, both located at rear of sensor
Indicators
Top-mounted red LED indicator lights when output is
conducting.
Model SMA91E and SM91ESR emitters: visible-red
“tracer beam” indicates “Power ON” and enables line-
of-sight alignment.
Construction
Reinforced thermoplastic polyester housing, totally en-
capsulated, molded acrylic lenses and stainless steel
hardware
Environmental Rating
Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 12 and 13
IEC IP66
Connections
PVC-jacketed 2 m (6.5') or 9 m (30') cables or 3-pin
Mini-style (QD) fitting available. See Quick-Disconnect
Cables on page 10.
Operating Conditions
Temperature: -20° to +70° C (-4° to +158° F)
Maximum relative humidity: 90% at 50° C (non-con-
densing)
Application Notes
1.) 912 Series ac sensors can be destroyed from over-
load conditions.
2.) Use on low voltage requires careful analysis of the
load to determine if the leakage current or on-state
voltage of the sensor will interfere with proper opera-
tion of the load.
3.) The false-pulse protection feature may cause mo-
mentary drop-out of the load when the sensor is wired
in series or parallel with mechanical switch contacts.
Certifications
VALU-BEAM® 912 Series
6 www.bannerengineering.com - tel: 763-544-3164 P/N 03467_web
Rev. F
AC Hookups
Emitters - Cabled Emitters - QD (3-Pin Mini-Style)
3-Pin Mini-Style Pinout (Cable Connector
Shown)
bn
bu
+
–
10-250V ac/dc
bn
bk
bu 10-250V ac/dc
+
–
2
3
1
1 = Black
2 = Brown
3 = Blue
Other AC Models - Cabled Other AC Models - QD (3-Pin Mini-Style)
bn
bu Load
24-250V ac
bn
bk
bu 24-250V ac
Load
+
–
Excess Gain
Mode
Opposed Mode Emitter and
Receiver Models
DISTANCE
EXCESS GAIN
1
10
100
1.0 m
3.3'
10 m
33'
100 m
330'
0.1 m
0.33'
1000
SMA91E / SM91R,
SMA91E / SM2A91R
Opposed Mode
DISTANCE
EXCESS GAIN
1
10
100
0.10 m
0.33'
1.0 m
3.3'
10 m
33'
0.01 m
0.033'
1000
SMA91ESR / SM91RSR,
SMA91ESR / SM2A91RSR
Opposed Mode
Retroreflective Mode Models
DISTANCE
EXCESS GAIN
1
10
100
0.10 m
0.33'
1.0 m
3.3'
10 m
33'
0.01 m
0.033'
1000
SM912LV,
SM2A912LV
Retroreflective Mode
With BRT-3 Reflector
1
10
100
0.10 m
0.33'
1.0 m
3.3'
10 m
33'
0.01 m
0.033'
DISTANCE
1000
SM912LVAG,
SM2A912LVAG
Retroreflective Mode
With BRT-3 Reflector
EXCESS GAIN
VALU-BEAM® 912 Series
P/N 03467_web
Rev. F
www.bannerengineering.com - tel: 763-544-3164 7
Mode
Diffuse Mode Models
DISTANCE
EXCESS GAIN
1
10
100
10 mm
0.4"
100 mm
4"
1000 mm
40"
1 mm
0.04"
1000
SM912D,
SM2A912D
Diffuse Mode
DISTANCE
EXCESS GAIN
1
10
100
10 mm
0.4"
100 mm
4"
1000 mm
40"
1 mm
0.04"
1000
SM912DSR,
SM2A912DSR
Diffuse Mode
Convergent Mode Models
Visible Red 650 nm
DISTANCE
EXCESS GAIN
1
10
100
10 mm
0.4"
100 mm
4"
1000 mm
40"
1 mm
0.04"
1000
SM912CV,
SM2A912CV
Convergent Mode
Infrared 880 nm
DISTANCE
EXCESS GAIN
1
10
100
10 mm
0.4"
100 mm
4"
1000 mm
40"
1 mm
0.04"
1000
SM912C,
SM2A912C
Convergent Mode
Glass Fiber Optic Individual
Emitter or Receiver Models
DISTANCE
EXCESS GAIN
1
10
100
1.0 m
3.3'
10 m
33'
100 m
330'
0.1 m
0.33'
1000
SMA91EF & SM91RF,
SMA91EF & SM2A91RF
Opposed Mode
IT23S Fibers
W/L9 Lenses
IT23S Fibers
W/L16F Lenses
Glass Fiber Optic Models
DISTANCE
EXCESS GAIN
1
10
100
10 mm
0.4"
100 mm
4"
1000 mm
40"
1 mm
0.04"
1000
SM912F
SM2A912F
Opposed Mode
IT13S Fibers
IT23S Fibers
DISTANCE
EXCESS GAIN
1
10
100
10 mm
0.4"
100 mm
4"
1000 mm
40"
1 mm
0.04"
1000
SM912F
SM2A912F
Diffuse Mode
BT23S Fiber
BT13S Fiber
VALU-BEAM® 912 Series
8 www.bannerengineering.com - tel: 763-544-3164 P/N 03467_web
Rev. F
Beam Patterns
Mode
Opposed Mode Emitter and
Receiver Models
75 m
250'
60 m
200'
45 m
150'
30 m
100'
15 m
50'
0
0
500 mm
1000 mm
1500 mm
500 mm
1000 mm
1500 mm
0
20"
40"
60"
20"
40"
60"
DISTANCE
SMA91E / SM91R,
SMA91E / SM2A91R
Opposed Mode
3.0 m
10'
2.4 m
8'
1.8 m
6'
1.2 m
4'
.6 m
2'
0
0
100 mm
200 mm
300 mm
100 mm
200 mm
300 mm
0
4"
8"
12"
4"
8"
12"
DISTANCE
SMA91ESR / SM91RSR,
SMA91ESR / SM2A91RSR
Opposed Mode
Retroreflective Mode Models
Non-Polarized
10 m
33'
8 m
26'
6 m
20'
4 m
13'
2 m
6.6'
0
0
50 mm
100 mm
150 mm
50 mm
100 mm
150 mm
0
2.0"
4.0"
6.0"
2.0"
4.0"
6.0"
DISTANCE
SM912LV, SM2A912LV
Retroreflective Mode
With BRT-3 Reflector
Polarized
5 m
16'
4 m
13'
3 m
10'
2 m
6.6'
1 m
3.3'
0
0
25 mm
50 mm
75 mm
25 mm
50 mm
75 mm
0
1.0"
2.0"
3.0"
1.0"
2.0"
3.0"
DISTANCE
SM912LVAG, SM2A912LVAG
Retroreflective Mode
With BRT-3 Reflector
Diffuse Mode Models
750 mm
30"
600 mm
24"
450 mm
18"
300 mm
12"
150 mm
6"
0
0
6 mm
12 mm
18 mm
6 mm
12 mm
18 mm
0
0.25"
0.50"
0.75"
0.25"
0.50"
0.75"
DISTANCE
SM912D, SM2A912D
Diffuse Mode
375 mm
15"
300 mm
12"
225 mm
9"
150 mm
6"
75 mm
3"
0
0
6 mm
12 mm
18 mm
6 mm
12 mm
18 mm
0
0.25"
0.50"
0.75"
0.25"
0.50"
0.75"
DISTANCE
SM912DSR, SM2A912DSR
Diffuse Mode
Convergent Mode Models
Visible Red 650 nm
62.5 mm
2.5"
50 mm
2.0"
37.5 mm
1.5"
25 mm
1.0"
12.5 mm
0.5"
0
0
0.8 mm
1.6 mm
2.4 mm
0.8 mm
1.6 mm
2.4 mm
0
0.03"
0.06"
0.09"
0.03"
0.06"
0.09"
DISTANCE
SM912CV, SM2A912CV
Convergent Mode
Infrared 880 nm
75 mm
3.0"
60 mm
2.4"
45 mm
1.8"
30 mm
1.2"
15 mm
0.6"
0
0
0.8 mm
1.6 mm
2.4 mm
0.8 mm
1.6 mm
2.4 mm
0
0.03"
0.06"
0.09"
0.03"
0.06"
0.09"
DISTANCE
SM912C, SM2A912C
Convergent Mode
Glass Fiber Optic Individual
Emitter or Receiver Models
12 m
40'
9.6 m
32'
7.2 m
24'
4.8 m
16'
2.4 m
8'
0
0
100 mm
200 mm
300 mm
100 mm
200 mm
300 mm
0
4"
8"
12"
4"
8"
12"
DISTANCE
SMA91EF & SM91RF,
SMA91EF & SM2A91RF
Opposed Mode
IT23S Fibers
With L9 lenses
IT23S Fibers
With L16F lenses
VALU-BEAM® 912 Series
P/N 03467_web
Rev. F
www.bannerengineering.com - tel: 763-544-3164 9
Mode
Glass Fiber Optic Models
500 mm
20"
400 mm
16"
300 mm
12"
200 mm
8"
100 mm
4"
0
0
25 mm
50 mm
75 mm
25 mm
50 mm
75 mm
0
1"
2"
3"
1"
2"
3"
DISTANCE
SM912F/SM2A912F
Opposed Mode
IT13S IT23S
37.5 mm
1.5"
30 mm
1.2"
22.5 mm
0.9"
15 mm
0.6"
7.5 mm
0.3"
0
0
0.7 mm
1.3 mm
1.9 mm
0.7 mm
1.3 mm
1.9 mm
0
0.03"
0.05"
0.08"
0.03"
0.05"
0.08"
DISTANCE
SM912F/SM2A912F
Diffuse Mode
BT23SBT13S
Accessories
Quick-Disconnect Cables
Model Length Style Dimensions Pinout (Female View)
MBCC-306 2 m (6.5') 3-Pin Mini-style
straight
7/8-16UN-2B
ø 28 mm max.
(1.1")
61 mm max.
(2.4")
2
3
1
1 = Black
2 = Brown
3 = Blue
MBCC-312 4 m (12')
MBCC-330 9 m (30')
MBCC-406 2 m (6.5') 4-Pin Mini-style
straight
4
3
1
2
1 = Brown
2 = White
3 = Blue
4 = Black
MBCC-412 4 m (12')
MBCC-430 9 m (30')
Cabling Accessories
Model Description
AC-6 2 m (6.5') armored cable jacket I.D. 5/16"; O.D. 7/16"
PVC-6 2 m (6.5') flexible PVC tubing (not for QD models) I.D. 1/4"; O.D. 3/8"
RF1-2NPS Compression fitting for attaching armored cable or PVC tubing –
HF1-2NPS • Flexible black nylon cable protector
• Includes a neoprene gland that compresses around the VALU-BEAM ca-
ble to provide an additional seal against moisture
• Resistant to gasoline, alcohol, oil, grease, solvents and weak acids
• Working temperature range of -30° to +100° C (-22° to +212° F)
VALU-BEAM® 912 Series
10 www.bannerengineering.com - tel: 763-544-3164 P/N 03467_web
Rev. F
Extension Cables (without connectors)
The following cables are available for extending the length of existing sensor cable. These are 30 m (100') lengths of VALU-BEAM cable.
This cable may be spliced to existing cable. Connectors, if used, must be customer-supplied.
Model Type Used With:
EC312-100 4-conductor SM912 Series dc sensors
EC312A-100 2-conductor For all emitters and SM2A912 Series ac sensors
Retroreflective Targets
Banner offers a wide selection of high-quality retroreflective targets. See the Acces-
sories section of your current Banner Photoelectric Sensors catalog for complete in-
formation.
NOTE: Polarized sensors require corner cube type ret-
roreflective targets. Non-polarized sensors may use any
retroreflective target.
Replacement Lens Assemblies
VALU-BEAM lens assemblies are field-replaceable. In addition, some lenses may be used to convert from one sensing mode to another,
or to change the sensing range of a particular sensor. The possible conversions are listed in the table below.
Models Description Possible Sensing Mode or Range Changes
UC-900AG Replacement lens for LVAG Change LV to LVAG
UC-900C Replacement lens for C and CV Change LV to CV
UC-900DSR Replacement lens for DSR, ESR, and RSR Change D or F to DSR, EF to ESR, and RF to RSR
UC-900F Replacement lens for F Change D to F and DSR to F
UC-900FP Replacement lens for FP –
UC-900L Replacement lens for E, R, LV, and D Change LVAG to LV, CV to LV, DSR to D, and F to D
UC-900J Attach to E, R, ESR, RSR, LV, and D models Flat polycarbonate dust cover
VALU-BEAM® 912 Series
P/N 03467_web
Rev. F
www.bannerengineering.com - tel: 763-544-3164 11
Mounting Brackets
SMB30C
• 30 mm split clamp, black
PBT bracket
• Stainless steel mounting
hardware included
• Mounting hole for 30 mm
sensor
66
56
13
A
B
Hole center spacing: A=ø 45
Hole size: B=ø 27.2
SMB30SC
• Swivel bracket with 30 mm
mounting hole for sensor
• Black reinforced thermo-
plastic polyester
• Stainless steel mounting
and swivel locking hard-
ware included
67
58
29
B
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
SMB30MM
• 12-ga. stainless steel
bracket with curved
mounting slots for versatile
orientation
• Clearance for M6 (¼")
hardware
• Mounting hole for 30 mm
sensor
70
57
A
B
C
57
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of
shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned
to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse,
abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (IN-
CLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND
WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL
BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPEN-
SES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY
PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WAR-
RANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or
liabilities relating to any product previously manufactured by Banner Engineering Corp.
VALU-BEAM® 912 Series