WaveAceTM Oscilloscopes 40 MHz-200 MHz Debug With Confidence THE TOOLS AND FEATURES FOR ALL YOUR DEBUG NEEDS Key Features * 40 MHz, 60 MHz, 100 MHz, and 200 MHz bandwidths * Sample rates up to 2 GS/s * Long Waveform Memory --up to 10 kpts/Ch (20 kpts interleaved) * Advanced Triggering-- Edge, Pulse Width, Video, Slope (Rise Time) * 5.7" color display on all models * * Multi-language User 32 automatic measurements Interface and Context Sensitive Help * Large internal waveform and setup storage * Four math functions plus FFT * USB host and device connections for printers, memory sticks and PC remote control A good oscilloscope should simplify how you work and shorten the time it takes to find and debug problems. The WaveAceTM combines long memory, a color display, extensive measurement capabilities, advanced triggering and excellent connectivity to improve troubleshooting and shorten debug time. With bandwidths from 40 MHz to 200 MHz, sample rates up to 2 GS/s and waveform memory up to 10 kpts/Ch (20 kpts interleaved) the WaveAce exceeds all expectations of a small affordable oscilloscope. Long Capture and Zoom Small, portable oscilloscopes often suffer from short capture time due to the small waveform memory. The WaveAce is available in 4 kpts/Ch and 10 kpts/Ch configurations which is up two to three times more than competitive products. More memory results in longer capture times showing more waveform detail with each trigger. Activate the built-in zoom function to take a closer look at the details. Digital Filter Digital filtering is available on each channel of the WaveAce. The Low-Pass, High-Pass, Band-Pass and Band-Stop filters allow you to isolate only the frequencies you want to see. Trigger Edge triggering is not always the best choice for every signal. Beyond the basic edge trigger is a set of trigger capabilities which include Pulse Width, Video and Slope (Rise Time) triggers. 2 Automatic Measurements Waveform Math Connectivity With 32 standard automatic measure- The WaveAce provides five math The WaveAce provides a USB host port ments the WaveAce simplifies functions including Add, Subtract, on the front panel for saving screen how you work. Display up to five Multiply, Divide and FFT. The FFT images, waveforms and setups to a measurements without crowding capability includes the choices of memory stick. A rear panel USB device the waveform display or show all four windows and two different port allows for connection to a PC or 32 at once with the measurement vertical scales. printer. Connecting and communicating dashboard. A wide range of advanced with a PC is simplified with EasyScope timing parameters provide insight software providing full access to the to the relationship between two oscilloscope's display, measurements, different signals. waveform data and front panel controls. Large Internal Storage Saving and recalling waveforms and setups from internal memory can save a lot of time during test and debug. The WaveAce can save up to 20 waveforms, 20 setups and two reference waveforms to the internal memory. Pass/Fail Test Waveform Sequence Recorder With built-in Pass/Fail Mask testing Capture and replay a sequence of the WaveAce can quickly identify up to 2500 waveforms to isolate problems and let you know when that runt or glitch which is causing they occur. A history of the P/F results problems in your system. can be displayed on the screen. Acquisition Modes Different applications call for different acquisitions modes. The WaveAce offers Real Time, Equivalent Time, Peak Detect and Averaging modes to ensure that any waveform can be captured and displayed. 3 SMART, SIMPLE, EFFICIENT 1. Fast Power Up 4 The WaveAce turns on and is ready for use in under 10 seconds. 2. Display 9 All WaveAce models have a 5.7" color display. 2 3. Connectivity Saving waveforms, screenshots and setups is easy with the front panel USB port for use with a memory stick. 4. Portability The small compact form factor is lightweight and only 5" deep. 5. Communication Rear panel USB and RS-232 ports enable direct remote control from a PC. The USB port also allows for connecting to a printer. 5 6. Intensity Waveform intensity can be quickly adjusted by rotating this knob, a meter on the display will appear and show the current setting. 7. Individual Vertical Controls Quickly change the vertical scale of either channel. 4 1 10 3 8. Push Knobs All WaveAce knobs can be pushed 6 11 for additional capabilities. Push the 12 V/div knobs to toggle between fixed and variable gain. Push the T/div knob 13 to enter zoom mode and push the position knobs to center the waveform on screen. 9. Local Language User Interface 7 The intuitive user interface is available in several different languages. 10. Front Panel Print Button Saving or Printing screenshots requires 8 only a single button press. 11. Backlit Menu Buttons When using certain features like Cursors or Measurements the button remains lit for easy menu navigation. 12. Context Sensitive Help Press any button or turn any knob while in help mode and a pop-up window displays the functionality of that control. 13. Auto Setup Quickly configures the vertical, horizontal and trigger settings for the WaveAce. Choose to view the waveform as multi-cycle, singlecycle, rising or falling edge. 5 WAVEACE 100 SPECIFICATIONS WaveAce 101 Bandwidth Rise Time Input Channels Display Sampling Rate (Single Shot) Sampling Rate (Equivalent Time) Peak Detect Period Memory Length Maximum Memory Vertical Resolution Vertical Sensitivity Bandwidth Limiting Filter Maximum Input Voltage Input Coupling Input Impedance Probes Timebase Range 40 MHz 8.8 ns 2 10 ns/div-50 s/div WaveAce 102 60 MHz 5.8 ns 2 5.7" Color, 320 x 240 Resolution 500 MS/s (interleaved), 250 MS/s (all channels) 50 GS/s 10 ns 4 kpts/Ch 4 kpts 8-bits 2 mV/div-5 V/div 20 MHz 400 Vpk, 300 Vrms GND, DC 1 M, AC 1 M 1 M || 13 pF 10:1, 1:1 Switchable Passive Probe (one per channel) 5 ns/div-50 s/div Triggering Triggers Edge, Pulse Width, Video, Slope (Rise Time), Alternate Measure, Math and Wave Recorder MeasureAmplitude, Average, Base, Burst Width, Cyclic RMS, + Duty Cycle, - Duty Cycle, Fall Time, Frequency, Max, Mean, Min, Overshoot, Peak-Peak, Period, Phase, Rise Time, RMS, Top, + Width, - Width. Plus 8 advanced p arameters for edge to edge timing measurements MathAdd, Subtract, Multiply, Divide, FFT (up to 1 kpts with Rectangular, Von Hann, Hamming or Blackman windows) Waveform Sequence Recorder Record and playback a sequence of up to 2500 waveforms Input/Output Interfaces USB RS-232 USB host port for flash drives, USB device port for connecting to PC and printers RS-232 port for connection to PC and EasyScope software Physical Dimensions (HWD) Weight 6 154 mm x 305 mm x 133 mm; 6" x 12" x 5.25" (height excludes feet) 2.3 kg; 5 lbs. WAVEACE 200 SPECIFICATIONS WaveAce 202 WaveAce 204 WaveAce 212 WaveAce 214 WaveAce 222 WaveAce 224 Bandwidth 60 MHz 60 MHz 100 MHz 100 MHz 200 MHz 200 MHz Rise Time 5.8 ns 5.8 ns 3.5 ns 3.5 ns 1.75 ns 1.75 ns Input Channels 2 4 2 4 2 4 Display 5.7" Color, 320 x 240 Resolution Sampling Rate (Single Shot) 1 GS/s (all channels) 2 GS/s (interleaved), 1 GS/s (all channels) Sampling Rate (Equivalent Time) 50 GS/s Peak Detect Period 2.5 ns Memory Length 9 kpts/Ch 10 kpts/Ch 9 kpts/Ch 10 kpts/Ch 9 kpts/Ch 10 kpts/Ch Maximum Memory (Interleaved) 18 kpts 20 kpts 18 kpts 20 kpts 18 kpts 20 kpts Vertical Resolution 8-bits Vertical Sensitivity 2 mV/div-5 V/div Bandwidth Limiting Filter 20 MHz Maximum Input Voltage 400 Vpk, 300 Vrms 400 Vpk, 300 Vrms (1 M), 5 Vrms (50 ) Input Coupling GND, DC 1 M, AC 1 M GND, DC 1 M, AC 1 M, 50 Input Impedance 1 M || 13 pF 1 M || 13 pF, 50 Probes 10:1, 1:1 Switchable Passive Probe (one per channel) Timebase Range 5 ns/div-50 s/div 2.5 ns/div-50 s/div Triggering Triggers Edge, Pulse Width, Video, Slope (Rise Time), Alternate Measure, Math and Wave Recorder MeasureAmplitude, Average, Base, Burst Width, Cyclic RMS, + Duty Cycle, - Duty Cycle, Fall Time, Frequency, Max, Mean, Min, Overshoot, Peak-Peak, Period, Phase, Rise Time, RMS, Top, + Width, - Width. Plus 8 advanced p arameters for edge to edge timing measurements MathAdd, Subtract, Multiply, Divide, FFT (up to 1 kpts with Rectangular, Von Hann, Hamming or Blackman windows) Waveform Sequence Recorder Record and playback a sequence of up to 2500 waveforms Input/Output Interfaces USB RS-232 LAN USB host port for flash drives, USB device port for connecting to PC and printers RS-232 port for connection to PC and EasyScope software (2 Channel models only) LAN port for connection to PC and EasyScope software (4 Channel models only) Physical 2 Ch Models Dimensions (HWD) Weight 4 Ch Models Dimensions (HWD) Weight 154 mm x 305 mm x 133 mm; 6" x 12" x 5.25" (height excludes feet) 2.3 kg; 5 lbs. 159 mm x 336 mm x 133 mm; 6.3" x 13.2" x 5.25" (height excludes feet) 3 kg; 6.6 lbs. 7 ORDERING INFORMATION Ordering Information Product Description Product Code Product Description 40 MHz, 250 MS/s, 2 Ch, 4 kpts/Ch with 5.7" Color Display. 500 MS/s Iinterleaved, 1 M Input 60 MHz, 250 MS/s, 2 Ch, 4 kpts/Ch with 5.7" Color Display. 500 MS/s Interleaved, 1 M Input 60 MHz, 1 GS/s, 2 Ch, 9 kpts/Ch with 5.7" Color Display. 18 kpts Interleaved. 1 M Input 60 MHz, 1 GS/s, 4 Ch, 10 kpts/Ch with 5.7" Color Display. 20 kpts Interleaved. 1 M Input 100 MHz, 1 GS/s, 2 Ch, 9 kpts/Ch with 5.7" Color Display. 18 kpts Interleaved. 1 M Input 100 MHz, 1 GS/s, 4 Ch, 10 kpts/Ch with 5.7" Color Display. 20 kpts Interleaved. 1 M Input 200 MHz, 1 GS/s, 2 Ch, 9 kpts/Ch with 5.7" Color Display. 18 kpts, 2 GS/s Interleaved. 50/1 M Input 200 MHz, 1 GS/s, 4 Ch, 10 kpts/Ch with 5.7" Color Display. 20 kpts, 2 GS/s Interleaved. 50/1 M Input WaveAce 101 Included with Standard Configuration One Passive Probe per Channel Multi-language User-interface and Help (English, French, German, Italian, Japanese, Korean, Russian, Simplified Chinese, Spanish, Traditional Chinese) EasyScope PC Software with USB Cable Getting Started Manual Protective Front Cover (4 channel models only) Calibration and Performance Certificate 3-year Warranty WaveAce 102 WaveAce 202 WaveAce 204 WaveAce 212 WaveAce 214 WaveAce 222 WaveAce 224 Accessories Soft Carrying Case for WaveAce Oscilloscopes Product Code WA-SOFTCASE Customer Service Teledyne LeCroy oscilloscopes and probes are designed, built, and tested to ensure high reliability. In the unlikely event you experience difficulties, our digital oscilloscopes are fully warranted for three years and our probes are warranted for one year. This warranty includes: * No charge for return shipping * Long-term 7-year support * Upgrade to latest software at no charge For more information, please contact: 1-800-5-LeCroy teledynelecroy.com Local sales offices are located throughout the world. Visit our website to find the most convenient location. (c) 2010 Teledyne LeCroy, Inc. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice. Product or brand names are trademarks or requested trademarks of their respective holders. WaveAceDS-16jan14