Contents Pliers Pliers Pliers Introduction E.2 VDE-insulated combination pliers E.3 VDE-insulated diagonal-cutting pliers E.4 VDE-insulated telephone pliers E.5 VDE-insulated flat- and round-nose pliers E.6 ESD pliers E.8 E E.1 Introduction Pliers Pliers Working on live systems calls for special safety procedures and special tools specially produced and tested for such applications. Weidmuller can provide users with a complete range of pliers complying with national and international testing standards. All Weidmuller pliers are produced and tested to DIN EN 60900. E Their ergonomic design fits snugly in the hand, resulting in a more natural, non-fatiguing hand position so you don't catch your fingers. VDE-insulated combination pliers KBZ 160 / KBZ 180 / KBZ 200 KBZI 200 p to 1000 V (AC) and 1500 V (DC) protective u insulation to IEC 900, DIN EN 60900 * drop-forged from high-quality special tool steels * safety handle with ergonomic and non-slip TPE VDE sleeve * made from shockproof, heat-and cold-resistant, not readily flammable, cadmium-free TPE (thermoplastic elastomer) * elastic grip zone and hard core * polished surface * nickel-chromium electrogalvanised coating protects against corrosion Combination pliers Heavy-duty combination pliers (telephone pliers) ombination pliers acc. to DIN ISO 5746 C * With opening gap (see diagram) * Foil and sheet up to a thickness of 2.5 mm can be gripped with the tip * When thickness does not exceed 2.5 mm, the gripping force pulls the workpiece towards the joint * Extra-long cutter for ribbon and round cables * For cutting soft and hard wire * Cutting edges inductively hardened to approx. 60 HRC elegraph pliers (combination pliers), acc. to T DIN 5746 * Heavy-duty model for tough demanding jobs * Extra-long cutter for ribbon and round cables * For cutting soft and hard wire * Cutting edges inductively hardened to approx. 60 HRC Pliers VDE-insulated combination pliers Technical data Cutting performance Conductor diameter, max. (H) Conductor diameter, max. (MH) Tool data Cutter hardness Total length Weight Note mm mm HRC mm g KBZ 160 1.8 2.5 KBZ 180 2.5 2.8 KBZ 200 2.5 3 KBZI 200 2.5 3 60 160 230 60 180 290 60 200 362 60 200 412 (MH) medium-hard wire; (H) hard wire; (P) piano wire (MH) medium-hard wire; (H) hard wire; (P) piano wire Ordering data Version Type Qty Order No. KBZ 160 1 9046280000 KBZ 180 1 9046290000 KBZ 200 1 9046300000 Type KBZI 200 Qty 1 Order No. 9046430000 Note E.3 E Pliers VDE-insulated diagonal-cutting pliers VDE-insulated diagonal-cutting pliers KSE 160 / KSE 200 / SE TOP SE HD 140 / SE HD 160 / SE HD 180 p to 1000 V (AC) and 1500 V (DC) u protective insulation to IEC 900, DIN EN 60900 * drop-forged from high-quality special tool steels * safety handle with ergonomic and non-slip TPE VDE sleeve * made from shockproof, heat-and cold-resistant, not readily flammable, cadmium-free TPE (thermoplastic elastomer) * elastic grip zone and hard core * polished surface * nickel-chromium electrogalvanised coating protects against corrosion Professional diagonal-cutting pliers for piano wire Diagonal-cutting pliers for hard wire iagonal-cutting pliers, acc. to DIN ISO 5749 D * Cutting edges inductively hardened to approx. 64 HRC * For cutting soft wire and piano wire Diagonal-cutting pliers, acc. to DIN ISO 5749 E KSE 160 - KSE 200 * Optimized transmission of force * Optimized precision cutting edge * With inlaid joint * With precision cutting edges * Cutting edges inductively hardened to approx. 62 HRC * Special tool steel SE TOP * With inlaid joint * Extra-fine precision cutting edge Technical data Cutting performance Conductor diameter, max. (H) Conductor diameter, max. (MH) Conductor diameter, max. (P) Tool data Cutter hardness Total length Weight Note mm mm mm HRC mm g KSE 160 2.5 3.5 2 KSE 200 3 4.2 2.5 SE TOP 2.5 3.5 2 SE HD 140 2 2.8 1.4 SE HD 160 2.3 3 1.6 SE HD 180 3 3.8 1.8 64 160 243 64 200 325 64 160 251 62 140 203 62 160 253 62 180 291 (MH) medium-hard wire; (H) hard wire; (P) piano wire (MH) medium-hard wire; (H) hard wire; (P) piano wire Ordering data Version Note E.4 Type Qty Order No. Type Qty Order No. KSE 160 1 9046410000 SE HD 140 1 9046310000 KSE 200 1 9046420000 SE HD 160 1 9046320000 SE TOP 1 9046340000 SE HD 180 1 9046330000 VDE-insulated telephone pliers FRZ SG 160 / FRZ SG 200 FRZ S 160 / FRZ S 200 p to 1000 V (AC) and 1500 V (DC) protective u insulation to IEC 900, DIN EN 60900 * drop-forged from high-quality special tool steels * safety handle with ergonomic and non-slip TPE VDE sleeve * made from shockproof, heat-and cold-resistant, not readily flammable, cadmium-free TPE (thermoplastic elastomer) * elastic grip zone and hard core * polished surface * nickel-chromium electrogalvanised coating protects against corrosion Bent half-round-nose pliers with cutter (telephone pliers) Half-round-nose pliers with cutter (telephone pliers) ent telephone pliers with cutter B acc. to DIN ISO 5745 * Half-rounded jaws * Serrated gripping surfaces * Tip bent at 45 * Cutting edges inductively hardened to approx. 60 HRC * Special tool steel elephone pliers with cutter to DIN ISO 5745 T * Half-rounded jaws * Serrated gripping surfaces * Cutting edges inductively hardened to approx. 60 HRC * Special tool steel Pliers VDE-insulated telephone pliers Technical data Cutting performance Conductor diameter, max. (H) Conductor diameter, max. (MH) Tool data Cutter hardness Total length Weight Note mm mm HRC mm g FRZ SG 160 1.6 2.5 FRZ SG 200 1.8 2.8 FRZ S 160 1.6 2.5 FRZ S 200 1.8 2.8 60 160 162 60 200 207 60 160 170 60 200 224 (MH) medium-hard wire; (H) hard wire; (P) piano wire (MH) medium-hard wire; (H) hard wire; (P) piano wire Ordering data Version Type Qty Order No. Type Qty Order No. FRZ SG 160 1 9046390000 FRZ S 160 1 9046370000 FRZ SG 200 1 9046400000 FRZ S 200 1 9046380000 Note E.5 E VDE-insulated flat- and round-nose pliers Pliers VDE-insulated flat- and round-nose pliers p to 1000 V (AC) and 1500 V (DC) u protective insulation to IEC 900, DIN EN 60900 * drop-forged from high-quality special tool steels * safety handle with ergonomic and non-slip TPE VDE sleeve * made from shockproof, heat-and cold-resistant, not readily flammable, cadmium-free TPE (thermoplastic elastomer) * elastic grip zone and hard core * polished surface * nickel-chromium electrogalvanised coating protects against corrosion FZ 160 RZ 160 Flat-nose pliers Round-nose pliers lat-nose pliers acc. to DIN ISO 5745 F * Serrated gripping surface * With long jaw ound-nose pliers acc. to DIN ISO 5745 R * Serrated gripping surface * With long jaw E Technical data Tool data Total length Weight Note mm g FZ 160 160 163 RZ 160 160 153 Ordering data Version Type FZ 160 Note E.6 Qty 1 Order No. Type 9046350000 RZ 160 Qty 1 Order No. 9046360000 E E.7 Pliers Introduction Pliers ESD pliers Weidmuller ESD pliers can be used with precision and safety when working with sensitive electronics. Electrostatic charging is prevented by the special handle material. E Electrostatic discharges (ESD) present a danger to electronics that should not be underestimated. The transferral or discharge of an electrostatic charge can cause significant damage. Charges smaller than 100 volts can cause damage to sensitive components. However, ESD with voltages under 2000 volts can not be felt by humans. When working with components which are particularly sensitive to electrostatic discharges, you need an electrostatic-free work environment and the properly designed tools. The ESD pliers are particularly suited for use with electronics, including electronic switches and components, as well as with precision mechanics. All pliers feature an ESD-protected two-coloured double-component plastic hand grip. The grip material in use complies with all of the requirements for ESD hand-tool protection for working with ESD-sensitive components. The 120 mm-long ESD pliers are available individually or as part of a four-piece set: diagonal-cutting pliers, angle-cutting pliers, with pointed head, flat-nose pliers and snipe-nosed pliers. ESD pliers are not appropriate for working with live components or component assemblies. ESD pliers Electronic ESD diagonal-cutting pliers with pointed head * Hard wire (spring wire or steel nails): 0.4 mm/AWG 26 * Semi-hard wire (iron or nails): 1.0 mm/AWG 18 * Soft wire (copper or aluminium): 1.5 mm/AWG 15 SEE ESD 125 Electronic ESD diagonal-cutting pliers with oval head * Semi-hard wire (iron or nails): 0.8 mm/AWG 20 * Soft wire (copper or aluminium): 1.5 mm/AWG 15 Ordering data Type Qty SEE ESD 120 1 Order No. 9205130000 Technical data Weight 90 g Pliers SEE ESD 120 Ordering data Type Qty SEE ESD 125 1 Order No. 9204750000 Technical data Weight 90 g E FZE ESD 130 Electronic ESD flat-nosed pliers Ordering data Type Qty FZE ESD 130 1 Order No. 9204760000 Technical data Weight SZE ESD 130 Electronic ESD Snipe-nosed pliers 90 g Ordering data Type Qty SZE ESD 130 1 Order No. 9204770000 Technical data Weight 90 g E.9 ESD pliers SVSE ESD 130 Pliers Electronic ESD angle -cutting pliers * Hard wire (spring wire or steel nails): 0.6 mm/AWG 22 * Semi-hard wire (iron or nails): 1.0 mm/AWG 18 * Soft wire (copper or aluminium): 1.2 mm/AWG 15 SUPER CUT Electronic diagonal-cutting pliers * Soft wire (copper or aluminium): 1.2 mm/AWG 15 Ordering data Type Qty SVSE ESD 130 1 Order No. 9205140000 Technical data Weight 90 g Ordering data Type Qty SUPER CUT 1 Order No. 9205150000 Technical data Weight 78 g E KOF SET ESD Electronic ESD case set Ordering data Type Qty KOF SET ESD 1 Contents: * Diagonal-cutting pliers * Snipe-nosed pliers * Flat-nose pliers * Angle-cutting pliers E.10 Technical data Weight 547 g Order No. 9205210000