Pliers
E
E.1
Contents
Pliers
Pliers
Introduction E.2
VDE-insulated combination pliers E.3
VDE-insulated diagonal-cutting pliers E.4
VDE-insulated telephone pliers E.5
VDE-insulated flat- and round-nose pliers E.6
ESD pliers E.8
Pliers
E
Introduction
Working on live systems calls for special safety procedures
and special tools specially produced and tested for such
applications.
Weidmüller can provide users with a complete range of pliers
complying with national and international testing standards.
All Weidmüller pliers are produced and tested to DIN EN 60900.
Their ergonomic design fits snugly in the hand, resulting in
a more natural, non-fatiguing hand position so you don’t
catch your fingers.
Pliers
E
E.3
VDE-insulated combination pliers
up to 1000 V (AC) and 1500 V (DC) protective
insulation to IEC 900, DIN EN 60900
• drop-forged from high-quality special tool steels
• safety handle with ergonomic and non-slip TPE
VDE sleeve
• made from shockproof, heat-and cold-resistant,
not readily ammable, cadmium-free TPE
(thermoplastic elastomer)
• elastic grip zone and hard core
• polished surface
• nickel-chromium electrogalvanised coating
protects against corrosion
Technical data
Cutting performance
Conductor diameter, max. (H) mm
Conductor diameter, max. (MH) mm
Tool data
Cutter hardness HRC
Total length mm
Weight g
Note
Ordering data
Version
Note
KBZ 160 / KBZ 180 / KBZ 200
Combination pliers
Combination pliers acc. to DIN ISO 5746
• With opening gap (see diagram)
• Foil and sheet up to a thickness of 2.5 mm can
be gripped with the tip
• When thickness does not exceed 2.5 mm, the
gripping force pulls the workpiece towards the
joint
• Extra-long cutter for ribbon and round cables
• For cutting soft and hard wire
• Cutting edges inductively hardened to approx.
60 HRC
KBZ 160 KBZ 180 KBZ 200
1.8 2.5 2.5
2.5 2.8 3
60 60 60
160 180 200
230 290 362
(MH) medium-hard wire; (H) hard wire; (P) piano wire
Type Qty Order No.
KBZ 160 1 9046280000
KBZ 180 19046290000
KBZ 200 19046300000
KBZI 200
Heavy-duty combination pliers
(telephone pliers)
Telegraph pliers (combination pliers), acc. to
DIN 5746
• Heavy-duty model for tough demanding jobs
• Extra-long cutter for ribbon and round cables
• For cutting soft and hard wire
• Cutting edges inductively hardened to approx.
60 HRC
KBZI 200
2.5
3
60
200
412
(MH) medium-hard wire; (H) hard wire; (P) piano wire
Type Qty Order No.
KBZI 200 19046430000
Pliers
VDE-insulated combination pliers
E
E.4
VDE-insulated diagonal-cutting pliers
up to 1000 V (AC) and 1500 V (DC)
protective insulation to IEC 900, DIN EN
60900
• drop-forged from high-quality special tool steels
• safety handle with ergonomic and non-slip TPE
VDE sleeve
• made from shockproof, heat-and cold-resistant,
not readily ammable, cadmium-free TPE
(thermoplastic elastomer)
• elastic grip zone and hard core
• polished surface
• nickel-chromium electrogalvanised coating
protects against corrosion
Technical data
Cutting performance
Conductor diameter, max. (H) mm
Conductor diameter, max. (MH) mm
Conductor diameter, max. (P) mm
Tool data
Cutter hardness HRC
Total length mm
Weight g
Note
Ordering data
Version
Note
KSE 160 / KSE 200 / SE TOP
Professional diagonal-cutting pliers for piano
wire
Diagonal-cutting pliers, acc. to DIN ISO 5749
• Cutting edges inductively hardened to approx.
64 HRC
• For cutting soft wire and piano wire
KSE 160 - KSE 200
• Optimized transmission of force
• Optimized precision cutting edge
SE TOP
• With inlaid joint
• Extra-ne precision cutting edge
KSE 160 KSE 200 SE TOP
2.5 32.5
3.5 4.2 3.5
2 2.5 2
64 64 64
160 200 160
243 325 251
(MH) medium-hard wire; (H) hard wire; (P) piano wire
Type Qty Order No.
KSE 160 19046410000
KSE 200 19046420000
SE TOP 19046340000
SE HD 140 / SE HD 160 / SE HD 180
Diagonal-cutting pliers for hard wire
Diagonal-cutting pliers, acc. to DIN ISO 5749
• With inlaid joint
• With precision cutting edges
• Cutting edges inductively hardened to approx.
62 HRC
• Special tool steel
SE HD 140 SE HD 160 SE HD 180
2 2.3 3
2.8 33.8
1.4 1.6 1.8
62 62 62
140 160 180
203 253 291
(MH) medium-hard wire; (H) hard wire; (P) piano wire
Type Qty Order No.
SE HD 140 19046310000
SE HD 160 19046320000
SE HD 180 19046330000
Pliers
VDE-insulated diagonal-cutting pliers
E
E.5
VDE-insulated telephone pliers
up to 1000 V (AC) and 1500 V (DC) protective
insulation to IEC 900, DIN EN 60900
• drop-forged from high-quality special tool steels
• safety handle with ergonomic and non-slip TPE
VDE sleeve
• made from shockproof, heat-and cold-resistant,
not readily ammable, cadmium-free TPE
(thermoplastic elastomer)
• elastic grip zone and hard core
• polished surface
• nickel-chromium electrogalvanised coating
protects against corrosion
Technical data
Cutting performance
Conductor diameter, max. (H) mm
Conductor diameter, max. (MH) mm
Tool data
Cutter hardness HRC
Total length mm
Weight g
Note
Bent telephone pliers with cutter
acc. to DIN ISO 5745
• Half-rounded jaws
• Serrated gripping surfaces
• Tip bent at 45°
• Cutting edges inductively hardened to approx.
60 HRC
• Special tool steel
Ordering data
Version
Note
FRZ SG 160 / FRZ SG 200
Bent half-round-nose pliers with cutter
(telephone pliers)
FRZ SG 160 FRZ SG 200
1.6 1.8
2.5 2.8
60 60
160 200
162 207
(MH) medium-hard wire; (H) hard wire; (P) piano wire
Type Qty Order No.
FRZ SG 160 19046390000
FRZ SG 200 19046400000
FRZ S 160 / FRZ S 200
Half-round-nose pliers with cutter
(telephone pliers)
Telephone pliers with cutter to DIN ISO 5745
• Half-rounded jaws
• Serrated gripping surfaces
• Cutting edges inductively hardened to approx.
60 HRC
• Special tool steel
FRZ S 160 FRZ S 200
1.6 1.8
2.5 2.8
60 60
160 200
170 224
(MH) medium-hard wire; (H) hard wire; (P) piano wire
Type Qty Order No.
FRZ S 160 19046370000
FRZ S 200 19046380000
Pliers
VDE-insulated telephone pliers
E
E.6
VDE-insulated flat- and round-nose
pliers
Technical data
up to 1000 V (AC) and 1500 V (DC)
protective insulation to IEC 900, DIN EN
60900
• drop-forged from high-quality special tool steels
• safety handle with ergonomic and non-slip TPE
VDE sleeve
• made from shockproof, heat-and cold-resistant,
not readily ammable, cadmium-free TPE
(thermoplastic elastomer)
• elastic grip zone and hard core
• polished surface
• nickel-chromium electrogalvanised coating
protects against corrosion
Tool data
Total length mm
Weight g
Note
Version
Note
Flat-nose pliers
FZ 160
Type Qty Order No.
FZ 160 19046350000
Ordering data
FZ 160
160
163
Flat-nose pliers acc. to DIN ISO 5745
• Serrated gripping surface
• With long jaw
RZ 160
Round-nose pliers
Round-nose pliers acc. to DIN ISO 5745
• Serrated gripping surface
• With long jaw
RZ 160
160
153
Type Qty Order No.
RZ 160 19046360000
Pliers
VDE-insulated flat- and round-nose pliers
E
E.7
Pliers
Pliers
E
Introduction
ESD pliers
Weidmüller ESD pliers can be used with precision and safety
when working with sensitive electronics. Electrostatic charging
is prevented by the special handle material.
Electrostatic discharges (ESD) present a danger to electronics
that should not be underestimated. The transferral or discharge
of an electrostatic charge can cause significant damage.
Charges smaller than 100 volts can cause damage to sensitive
components. However, ESD with voltages under 2000 volts can
not be felt by humans. When working with components which
are particularly sensitive to electrostatic discharges, you need an
electrostatic-free work environment and the properly designed
tools.
The ESD pliers are particularly suited for use with electronics,
including electronic switches and components, as well as with
precision mechanics. All pliers feature an ESD-protected
two-coloured double-component plastic hand grip. The grip
material in use complies with all of the requirements for ESD
hand-tool protection for working with ESD-sensitive components.
The 120 mm-long ESD pliers are available individually or as part
of a four-piece set: diagonal-cutting pliers, angle-cutting pliers,
with pointed head, flat-nose pliers and snipe-nosed pliers. ESD
pliers are not appropriate for working with live components or
component assemblies.
E
E.9
SEE ESD 120
Electronic ESD diagonal-cutting pliers with
pointed head
•Hardwire(springwireorsteelnails):
0.4 mm/AWG 26
•Semi-hardwire(ironornails):
1.0 mm/AWG 18
•Softwire(copperoraluminium):
1.5 mm/AWG 15
Type Qty Order No.
SEEESD120 19205130000
Weight 90g
Technical data
Ordering data
SEE ESD 125
Electronic ESD diagonal-cutting pliers with
oval head
•Semi-hardwire(ironornails):
0.8 mm/AWG 20
•Softwire(copperoraluminium):
1.5 mm/AWG 15
Type Qty Order No.
SEEESD125 19204750000
Weight 90g
Technical data
Ordering data
FZE ESD 130
Electronic ESD flat-nosed pliers Type Qty Order No.
FZEESD130 19204760000
Weight 90g
Technical data
Ordering data
SZE ESD 130
Electronic ESD Snipe-nosed pliers Type Qty Order No.
SZEESD130 19204770000
Weight 90g
Technical data
Ordering data
Pliers
ESD pliers
E
E.10
SVSE ESD 130
Electronic ESD angle -cutting pliers
•Hardwire(springwireorsteelnails):
0.6 mm/AWG 22
•Semi-hardwire(ironornails):
1.0 mm/AWG 18
•Softwire(copperoraluminium):
1.2 mm/AWG 15
Type Qty Order No.
SVSEESD130 19205140000
Weight 90g
Technical data
Ordering data
SUPER CUT
Electronic diagonal-cutting pliers
•Softwire(copperoraluminium):
1.2 mm/AWG 15
Type Qty Order No.
SUPERCUT 19205150000
Weight 78g
Technical data
Ordering data
KOF SET ESD
Electronic ESD case set
Contents:
•Diagonal-cuttingpliers
•Snipe-nosedpliers
•Flat-nosepliers
•Angle-cuttingpliers
Type Qty Order No.
KOFSETESD 19205210000
Weight 547g
Technical data
Ordering data
Pliers
ESD pliers