Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Overview KEMET's X7R dielectric features a 125C maximum operating temperature and is considered "temperature stable." The Electronics Components, Assemblies & Materials Association (EIA) characterizes X7R dielectric as a Class II material. Components of this classification are fixed, ceramic dielectric capacitors suited for bypass and decoupling applications or for frequency discriminating circuits where Q and stability of capacitance characteristics are not critical. X7R exhibits a predictable change in capacitance with respect to time and voltage and boasts a minimal change in capacitance with reference to ambient temperature. Capacitance change is limited to 15% from -55C to +125C. Benefits Applications * * * * Typical applications include decoupling, bypass, filtering and transient voltage suppression. * * * * * * -55C to +125C operating temperature range Lead (Pb)-free, RoHS, and REACH Compliant Temperature stable dielectric EIA 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, and 2225 case sizes DC voltage ratings of 6.3 V, 10 V, 16 V, 25 V, 35 V, 50 V, 100 V, 200 V, and 250 V Capacitance offerings ranging from 10 pF to 47 F Available capacitance tolerances of 5%, 10% and 20% Non-polar device, minimizing installation concerns 100% pure matte tin-plated termination finish allowing for excellent solderability SnPb termination finish option available upon request (5% Pb minimum) Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Ordering Information C Ceramic 1206 Case Size Specification/ (L" x W") Series1 0402 0603 0805 1206 1210 1808 1812 1825 2220 2225 1 2 C C = Standard 106 M 4 R A Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Dielectric Failure Rate/ Design R = X7R A = N/A Two significant digits + number of zeros. J = 5% K = 10% M = 20% 9 = 6.3 8 = 10 4 = 16 3 = 25 6 = 35 5 = 50 1 = 100 2 = 200 A = 250 C TU Termination Packaging/ Finish2 Grade (C-Spec) C = 100% Matte Sn See "Packaging C-Spec Ordering Options Table" below Flexible termination option is available. Please see FT-CAP product bulletin C1013_X7R_FT-CAP_SMD. Additional termination finish options may be available. Contact KEMET for details. One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 1 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Packaging C-Spec Ordering Options Table Packaging/Grade Ordering Code (C-Spec) Packaging Type1 Bulk Bag/Unmarked 7" Reel/Unmarked 13" Reel/Unmarked 7" Reel/Marked 13" Reel/Marked 7" Reel/Unmarked/2mm pitch2 13" Reel/Unmarked/2mm pitch2 Not required (Blank) TU 7411 (EIA 0603 and smaller case sizes) 7210 (EIA 0805 and larger case sizes) TM 7040 (EIA 0603 and smaller case sizes) 7215 (EIA 0805 and larger case sizes) 7081 7082 Default packaging is "Bulk Bag". An ordering code C-Spec is not required for "Bulk Bag" packaging. The terms "Marked" and "Unmarked" pertain to laser marking option of capacitors. All packaging options labeled as "Unmarked" will contain capacitors that have not been laser marked. Please contact KEMET if you require a laser marked option. For more information see "Capacitor Marking". 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option see "Tape & Reel Packaging Information". 1 1 Dimensions - Millimeters (Inches) L W B T S 1 EIA Size Code Metric Size Code 0402 1005 1.00 (0.040)0.05 (0.002) 0.50 (0.020)0.05 (0.002) 0.30 (0.012)0.10 (0.004) 0.30 (0.012) 0603 1608 1.60 (0.063)0.15 (0.006) 0.80 (0.032)0.15 (0.006) 0.35 (0.014)0.15 (0.006) 0.70 (0.028) 0805 2012 2.00 (0.079)0.20 (0.008) 1.25 (0.049)0.20 (0.008) 0.50 (0.02)0.25 (0.010) 0.75 (0.030) 1206 3216 3.20 (0.126)0.20 (0.008) 1.60 (0.063)0.20 (0.008) 0.50 (0.02) 0.25 (0.010) 12101 3225 3.20 (0.126)0.20 (0.008) 2.50 (0.098)0.20 (0.008) 1808 4520 See Table 2 0.50 (0.02)0.25 (0.010) for Thickness 4.70 (0.185)0.50 (0.020) 2.00 (0.079)0.20 (0.008) 0.60 (0.024)0.35 (0.014) 1812 4532 4.50 (0.177)0.30 (0.012) 3.20 (0.126)0.30 (0.012) 0.60 (0.024)0.35 (0.014) 1825 4564 4.50 (0.177)0.30 (0.012) 6.40 (0.252)0.40 (0.016) 0.60 (0.024)0.35 (0.014) 2220 5650 5.70 (0.224)0.40 (0.016) 5.00 (0.197)0.40 (0.016) 0.60 (0.024)0.35 (0.014) 2225 5664 5.60 (0.220)0.40 (0.016) 6.40 (0.248)0.40 (0.016) 0.60 (0.024)0.35 (0.014) L Length W Width T Thickness S Mounting Separation Technique Minimum B Bandwidth N/A Solder Reflow Only Solder Wave or Solder Reflow Solder Reflow Only For capacitance values 4.7 F add 0.02 (0.001) to the width tolerance dimension and 0.10 (0.004) to the length tolerance dimension. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 2 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Qualification/Certification Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 4, Performance & Reliability. Environmental Compliance Lead (Pb)-free, RoHS, and REACH compliant without exemptions. Electrical Parameters/Characteristics Item Parameters/Characteristics Operating Temperature Range -55C to +125C Capacitance Change with Reference to +25C and 0 VDC Applied (TCC) 15% Aging Rate (Maximum % Capacitance Loss/Decade Hour) 3.0% 1 2 3 4 Dielectric Withstanding Voltage (DWV) Dissipation Factor (DF) Maximum Limit at 25C Insulation Resistance (IR) Minimum Limit at 25C 250% of rated voltage (51 seconds and charge/discharge not exceeding 50mA) See Dissipation Factor Limit Table See Insulation Resistance Limit Table (Rated voltage applied for 1205 seconds at 25C) Regarding Aging Rate: Capacitance measurements (including tolerance) are indexed to a referee time of 48 or 1,000 hours. Please refer to a part number specific datasheet for referee time details. 2 DWV is the voltage a capacitor can withstand (survive) for a short period of time. It exceeds the nominal and continuous working voltage of the capacitor. 3 Capacitance and dissipation factor (DF) measured under the following conditions: 1 kHz 50 Hz and 1.0 0.2 Vrms if capacitance 10 F 120 Hz 10 Hz and 0.5 0.1 Vrms if capacitance > 10 F 4 To obtain IR limit, divide M-F value by the capacitance and compare to G limit. Select the lower of the two limits. Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as Automatic Level Control (ALC). The ALC feature should be switched to "ON." 1 Insulation Resistance Limit Table (X7R Dielectric) EIA Case Size 1,000 Megohm Microfarads or 100 G 500 Megohm Microfarads or 10 G 100 Megohm Microfarads or 10 G 0402 0603 0805 1206 1210 1808 1812 1825 2220 2225 < 0.012 F < 0.047 F < 0.15 F < 0.47 F < 0.39 F ALL < 2.2 F ALL < 10 F ALL 0.012 F 0.047 f < 0.47 f 0.15 F < 2.2 f 0.47 F < 4.7 f 0.39 F < 10 f N/A 2.2 F N/A 10 F N/A N/A 0.47 f 2.2 f 4.7 f 10 f N/A N/A N/A N/A N/A (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 3 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Post Environmental Limits High Temperature Life, Biased Humidity, Moisture Resistance Dielectric Case Size 0402 0603 0805 X7R 1206 1210 1808-2225 Rated DC Voltage < 16 16/25 > 25 < 16 16/25 > 25 < 16 16/25 < 16 16/25 > 25 < 16 16/25 > 25 < 16 16/25 > 25 35/50 < 16 16/25 < 16 16/25 > 25 < 16 16/25 < 16 16/25 > 25 Capacitance Value All < 1.0 F 1.0 F < 2.2 F < 1.0 F 2.2 F Dissipation Factor (Maximum %) Insulation Resistance 20% 10% of Initial Limit 7.5 5.0 3.0 7.5 5.0 3.0 20.0 7.5 5.0 3.0 20.0 1.0 F < 10 F Capacitance Shift 7.5 5.0 3.0 2.2 F 10 F 20.0 < 22 F 7.5 5.0 3.0 22 F 20.0 All 7.5 5.0 3.5 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 4 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Dissipation Factor (DF) Limit Table EIA Case Size 0402 0603 0805 1206 1210 1808-2225 Rated DC Voltage < 16 16 25 25 > 25 < 16 16/25 > 25 < 16 16/25 < 16 16/25 > 25 < 16 16/25 > 25 < 16 16/25 > 25 35/50 < 16 16/25 < 16 16/25 > 25 < 16 16/25 < 16 16/25 > 25 Capacitance All < 0.1 F 0.1 F All < 1.0 F 1.0 F < 2.2 F < 1.0 F 2.2 F Dissipation Factor (Maximum %) 5.0 3.5 3.5 10.0 2.5 5.0 3.5 2.5 10.0 5.0 3.5 2.5 10.0 1.0 F 2.2 F 5.0 3.5 2.5 10.0 10 F 10.0 < 22 F 5.0 3.5 2.5 22 F 10.0 All 5.0 3.5 2.5 < 10 F (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 5 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Table 1A - Capacitance Range/Selection Waterfall (0402 - 1206 Case Sizes) EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EC EC EC EC EB EB EB EC ED EE EF EP ED ED ED EH EN EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EC EC EC EC EB EB EB EC ED EE EF EP ED ED ED EH EN EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EC EC EC EC EB EB EB EC ED EE EF EP EG EG EF EH EH EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EC EC EC EC EC EC EC EC EC ED ED ED EH EH EH EH EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EC EC EC EC EC EC EC EC EC ED ED ED EH EH EH EH EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EC EC EB EB EB EB EC EC EC EC EM EG EG EG EM EM EH EH EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB ED ED ED ED EM EG EG 250 250 EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EC EC EC EC EB EB EB EC ED EE EF EP ED ED ED EH EN A 9 8 4 3 6 5 1 2 A 16 100 A 200 2 100 35 1 200 5 50 10 6 35 6.3 3 50 250 4 25 8 25 9 16 A 10 2 6.3 1 250 5 200 6 50 3 100 4 35 8 25 9 16 2 10 1 CG 8 C0402C 100 9 200 5 50 3 16 10 4 25 6.3 8 50 9 16 Voltage Code 25 10 CG CG 4 3 5 1 2 C0603C DN DM DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DO DP DP DP DN DN DN DN DN DP DG DG DG DP DP DP DP DE DG DG DG DN DM DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DO DP DP DP DN DN DN DN DN DP DG DG DG DP DP DP DP DE DG DG DG DN DM DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DO DP DP DP DN DN DN DN DN DP DG DG DG DP DP DP DP DE DG DG DG DN DM DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DO DP DP DP DN DN DN DN DN DP DG DG DG DG DG DG DG DN DM DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DO DP DP DP DN DP DP DG DG DP DP DE DE DH DH DG 9 8 4 3 6 DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DP DP DP DE DE DE DE DE DG DG DG DG DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DE DE DE DG DG 200 CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF 50 CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF 100 CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CJ CF CF CF CF CF CF 35 CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF 25 CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF 16 CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF 10 BB CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF 6.3 BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB CG CG CG CD Rated Voltage (VDC) Case Size/ Series 5 C1206C Product Availability and Chip Thickness Codes - See Table 2 for Chip Thickness Dimensions 6.3 Cap Cap Code 3 6.3 BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M 4 100 BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K 8 200 BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 9 50 16 25 BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB BB Cap Tolerance 10-20 pF* 100-200* 22 pF 220 24-91pF 240-910* 100-150 pF** 101-151** 180-820 pF** 181-821** 1000pF 102 1200 pF 122 1500 pF 152 1800 pF 182 2200 pF 222 2700 pF 272 3300 pF 332 392 3900 pF 4700 pF 472 5600 pF 562 6800 pF 682 8200 pF 822 10000 pF 103 12000 pF 123 153 15000 pF 18000 pF 183 22000 pF 223 27000 pF 273 33000 pF 333 393 39000 pF 47000 pF 473 56000 pF 563 68000 pF 683 82000 pF 823 0.1 F 104 0.12 F 124 154 0.15 F 0.18 F 184 0.22 F 224 0.27 F 274 0.33 F 334 0.39 F 394 0.47 F 474 0.56 F 564 684 0.68 F 0.82 F 824 1 F 105 1.2 F 125 1.5 F 155 1.8 F 185 2.2 F 225 275 2.7 F 5 16 3 25 4 10 8 C0805C 6.3 9 C0603C 50 Voltage Code Rated Voltage (VDC) 10 Cap Code C0402C 6.3 Cap Case Size/ Series DN DM DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DO DP DP DP DN DP DP DG DG DP DP DE DE DH DH 5 1 2 DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DG DG C0805C EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB ED ED ED ED EM C1206C *Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91) **Capacitance range Includes E12 decade values only. (i.e., 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, and 82) KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (configuration and dimensions). xx1 Available only in K, M tolerance. xx2 Available only in M tolerance. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 6 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Table 1A - Capacitance Range/Selection Waterfall (0402 - 1206 Case Sizes) cont'd 5 1 2 A 250 6 250 3 100 4 200 8 100 9 200 35 A 35 25 2 50 16 1 16 10 5 25 6 10 3 6.3 4 250 8 200 9 50 2 C1206C 100 1 6.3 5 100 3 C0805C 200 4 50 8 16 9 25 5 10 3 6.3 1 2 A Product Availability and Chip Thickness Codes - See Table 2 for Chip Thickness Dimensions 9 8 Case Size/ Series C0402C C0603C 25 6 16 3 10 4 6.3 8 250 9 EH 200 2 EH EH EH EH EH 50 1 ED EF EH EH EH EH EH 100 35 5 25 3 16 4 10 8 6.3 9 100 10 5 200 6.3 3 50 50 4 16 16 25 DG DG ED EF EH EH EH EH EH EH 5 1 2 A 9 8 4 3 C0805C 35 10 Voltage Code DG DG DG ED EF EH EH EH EH EH EH 50 J K M J K M J K M J K M J K M J K M J K M J K M Rated Voltage (VDC) 6.3 Cap Tolerance 25 Cap Code 4 50 Cap 8 16 335 395 475 565 685 825 106 226 9 C0603C 25 3.3 F 3.9 F 4.7 F 5.6 F 6.8 F 8.2 F 10 F 22 F Voltage Code Rated Voltage (VDC) 10 Cap Code C0402C 6.3 Cap Case Size/ Series 6 5 C1206C Table 1B - Capacitance Range/Selection Waterfall (1210 - 2225 Case Sizes) Case Size/ Series 250 250 A 100 2 200 1 100 A 5 200 2 A 50 1 2 C2225C 250 5 1 200 3 5 100 4 3 50 8 A 25 9 2 C2220C 250 Voltage Code 1 200 Rated Voltage (VDC) 5 100 FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB A 50 FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB C1825C 250 FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB 2 200 FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB 1 100 FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB 5 50 FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB 3 25 FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB 1 2 A C1210C 200 25 50 100 200 250 50 100 200 250 25 50 100 200 250 50 Product Availability and Chip Thickness Codes - See Table 2 for Chip Thickness Dimensions 50 K K K K K K K K K K K K K K K K K K K 2 200 50 200 100 100 250 50 M M M M M M M M M M M M M M M M M M M J J J J J J J J J J J J J J J J J J J C1812C 100 Cap Code 1 250 Cap 100 - 910* 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 5 200 Rated Voltage (VDC) A 100 2 25 1 25 5 50 3 16 4 16 8 10 9 10 Voltage Code Cap Tolerance 10 - 91 pF* 11 pF 12 pF 13 pF 15 pF 16 pF 18 pF 20 pF 22 pF 24 pF 27 pF 30 pF 33 pF 36 pF 39 pF 43 pF 47 pF 51 pF 56 pF C1808C 6.3 Cap Code C1210C 6.3 Cap Case Size/ Series 5 1 2 3 5 1 2 A 5 1 2 A 3 5 1 2 A 5 C1808C C1812C C1825C C2220C C2225C *Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91) **Capacitance range Includes E12 decade values only. (i.e., 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, and 82) KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (configuration and dimensions). xx1 Available only in K, M tolerance. xx2 Available only in M tolerance. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 7 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Table 1B - Capacitance Range/Selection Waterfall (1210 - 2225 Case Sizes) cont'd 200 250 50 100 200 25 50 100 200 250 50 100 200 250 K K K K K K K K K K K K K K K M M M M M M M M M M M M M M M FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB LF LF LF LF LF LF J K M FB FB FB FB FB FB FB LF LF LF GB GB GB GB J J J J J J J J J J J J J J J J J J J J J J J J J J J J K K K K K K K K K K K K K K K K K K K K K K K K K K K K M M M M M M M M M M M M M M M M M M M M M M M M M M M M FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FC FD FB FB FB FB FB FE FE FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FC FC FC FF FG FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FC FC FC FF FG LF LF LF LF LF LF LF LF LF LF LF LD LD LD LD LD LD LD LD LD LD LD LD LD LD LD LD LD LF LF LF LF LF LF LF LF LF LF LF LD LD LD LD LD LD LD LD LD LD LD LD LD LD Rated Voltage (VDC) Voltage Code 9 8 4 3 5 1 2 A 5 1 Case Size/ Series 5 1 2 A 5 1 2 A 250 100 J J J J J J J J J J J J J J J 3 KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE 250 A 100 2 200 1 50 5 250 A 100 2 C2225C 200 1 25 5 50 3 50 2 100 1 250 5 200 A 100 2 25 1 25 5 50 3 16 4 10 8 50 C2220C 9 16 A C1210C C1808C C1812C 25 50 5 250 A JE JE JE JE JE JE JE JE JB JB JB JB JB JC JC JC JC JC JC KC KC KC KC 100 2 HB HB HB HB HB HB HB HB HB JE JE JE JE JE JE JE JE JB JB JB JB JB JC JC 200 HB HB HB HB HB HB HB HB HB JE JE JE JE JE JE JE JE JB JB JB JB JB JC JC 1 2 A 3 5 C1825C 100 1 HB HB HB HB HB HE HE 200 5 HB HB HB HB HB HB HB HB HE HB HB HB HB HB HB HB HB HB 50 3 GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB 250 2 LD LD LD LD LD LD LD LD 100 GB GB GB GB GB GB GB GB GB GB GB GD GH GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB 200 GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB 50 GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB 250 LF LF LF LF LF LF LF LF LF 200 GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB 50 FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB 100 FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB 25 Product Availability and Chip Thickness Codes - See Table 2 for Chip Thickness Dimensions 200 Cap Code C1825C Voltage Code 10 Cap C1812C Rated Voltage (VDC) Cap Tolerance 62 pF 620 68 pF 680 75 pF 750 82 pF 820 91 pF 910 100 - 270 pF** 101 - 271** 110 pF 111 120 pF 121 130 pF 131 150 pF 151 180 pF 181 220 pF 221 270 pF 271 330 pF 331 390 pF 391 470 - 1,200 471 - 122** pF** 560 pF 561 680 pF 681 821 820 pF 1,000 pF 102 1,200 pF 122 1,500 pF 152 1,800 pF 182 2,200 pF 222 2,700 pF 272 3,300 pF 332 3,900 pF 392 4,700 pF 472 5,600 pF 562 6,800 pF 682 8,200 pF 822 10,000 pF 103 12,000 pF 123 15,000 pF 153 18,000 pF 183 22,000 pF 223 27,000 pF 273 33,000 pF 333 393 39,000 pF 47,000 pF 473 56,000 pF 563 68,000 pF 683 82,000 pF 823 0.10 F 104 C1808C 6.3 Cap Code C1210C 6.3 Cap Case Size/ Series 1 2 A 5 1 2 C2220C C2225C *Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91) **Capacitance range Includes E12 decade values only. (i.e., 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, and 82) KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (configuration and dimensions). xx1 Available only in K, M tolerance. xx2 Available only in M tolerance. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 8 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Table 1B - Capacitance Range/Selection Waterfall (1210 - 2225 Case Sizes) cont'd 2 A 100 200 250 50 250 1 JC JC JC JC JC JC JC JC JC JD JF JF JC JC JC JC JC JC JC JC JD JD JF JF JC JC JC JC JC JC JC JC JD JD JF JF KC KC KC KC KB KB KB KB KB KB KB KB KB KC KD KD KC KC KC KC KC KC KC KC KC KC KC KD KE KC KC KC KC KC KC KC KD KD KD KE KE KE KC KC KC KC KC KC KC KD KD KD KE KE KE 250 5 100 A 200 2 100 1 200 5 50 3 250 A 100 2 200 1 25 50 5 50 25 A 250 200 2 100 50 1 200 5 50 3 250 2 C2225C 200 1 C2220C 100 5 C1825C 1 2 A 5 1 2 A Product Availability and Chip Thickness Codes - See Table 2 for Chip Thickness Dimensions FB FC FC FC FC FD FD FD FD FD FF FH FG FG FG FG FH FM FK FS FD FD FD FD FD FD FD FD FF FG FL FM FH FM FJ FT FH FM FK FK FH LD FM LD FK LD FK GB GB GB GB GB GB GB GB GC GC GE GE GB GC GE GO GJ GL FS GB GB GB GB GB GB GB GB GC GC GE GE GB GC GE GO GJ GL GB GB GB GB GG GG GG GG GG GG GG GG GB GC GE GO GJ GL GB GE GG GG GG GG GG GJ GB GE GG GG GG GG GG GJ HB HB HB HB HB HB HB HB HB HB HB HB HB HC HD HF HB HB HB HB HB HB HB HB HD HD HF HF HB HB HB HB HB HB HD HD HD HD HF HF HB HB HB HB HB HB HD HD HD HD HF HF JC JC JC JC JC JC JC JC JC JC JC JC JC JC JD JF JC JC JC JC JC JC JC JC JC JC JC JC JC JC JD JF GK GK JF JF GK JF JO C1210C C1808C 1 2 A 5 C1812C 25 5 50 3 250 2 100 1 200 5 50 A 250 2 200 1 50 5 100 3 25 4 200 8 50 9 100 Voltage Code 250 JO 200 FS FS FS FS FS FS 100 JO JO 25 FM FM Rated Voltage (VDC) Case Size/ Series C1812C 100 FB FC FC FC FC FD FD FD FD FD FF FH FH FH FH FJ FG FM FG FG FH FM FK FS A 250 FB FC FC FC FC FD FD FD FD FD FF FH FH FH FH FJ FE FF FG FC FF FG FH FT 2 200 FB FC FC FC FC FD FD FD FD FD FF FH FH FH FH FJ FE FF FG FC FF FG FH FT 1 50 M M M M M M M M M M M M M M M M M M M M M M M M M M M M M 16 K K K K K K K K K K K K K K K K K K K K K K K K K K K K K 10 Cap Code J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 6.3 Cap 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 275 335 395 475 565 685 825 106 126 156 186 226 476 5 FB FC FC FC FC FD FD FD FD FD FF FH FH FH FH FJ FE FF FG FC FF FG FH FT Cap Tolerance 0.12 F 0.15 F 0.18 F 0.22 F 0.27 F 0.33 F 0.39 F 0.47 F 0.56 F 0.68 F 0.82 F 1.0 F 1.2 F 1.5 F 1.8 F 2.2 F 2.7 F 3.3 F 3.9 F 4.7 F 5.6 F 6.8 F 8.2 F 10 F 12 F 15 F 18 F 22 F 47 F 3 C1808C 100 4 25 8 50 9 16 Voltage Code Rated Voltage (VDC) 10 Cap Code C1210C 6.3 Cap Case Size/ Series 1 2 A 3 5 C1825C C2220C C2225C *Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91) **Capacitance range Includes E12 decade values only. (i.e., 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, and 82) KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (configuration and dimensions). xx1 Available only in K, M tolerance. xx2 Available only in M tolerance. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 9 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Table 2A - Chip Thickness/Tape & Reel Packaging Quantities Paper Quantity1 Plastic Quantity Thickness Code Case Size1 Thickness Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel BB CF CG CD CJ DM DN DO DP DE DG DH EB EC EN ED EE EF EP EM EG EH FB FC FD FE FF FG FL FH FM FJ FT FK FS NA NC LD LF GB GC GD GE GH GG GK GJ GL GO HB 0402 0603 0603 0603 0603 0805 0805 0805 0805 0805 0805 0805 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1706 1706 1808 1808 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1825 0.500.05 0.800.07* 0.800.10* 0.800.15 0.800.15* 0.700.20* 0.780.10* 0.800.10* 0.900.10* 1.000.10 1.250.15 1.250.20 0.780.10 0.900.10 0.950.10 1.000.10 1.100.10 1.200.15 1.200.20 1.250.15 1.600.15 1.600.20 0.780.10 0.900.10 0.950.10 1.000.10 1.100.10 1.250.15 1.400.15 1.550.15 1.700.20 1.850.20 1.900.20 2.100.20 2.500.30 0.900.10 1.000.15 0.900.10 1.000.15 1.000.10 1.100.10 1.250.15 1.300.10 1.400.15 1.550.10 1.600.20 1.700.15 1.900.20 2.500.20 1.100.15 10,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 0 0 0 4,000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 50,000 15,000 15,000 10,000 15,000 15,000 15,000 15,000 15,000 0 0 0 10,000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2,500 2,500 2,500 4,000 4,000 4,000 2,500 2,500 2,500 2,500 2,500 2,000 2,000 4,000 4,000 4,000 2,500 2,500 2,500 2,000 2,000 2,000 2,000 2,000 2,000 1,000 4,000 4,000 2,500 2,500 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000 0 0 0 0 0 0 0 0 0 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 8,000 8,000 10,000 10,000 10,000 10,000 10,000 10,000 8,000 8,000 8,000 8,000 8,000 8,000 4,000 10,000 10,000 10,000 10,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 2,000 2,000 4,000 Thickness Code Case Size1 Thickness Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel Paper Quantity1 Plastic Quantity Package quantity based on finished chip thickness specifications. 1 If ordering using the 2 mm Tape and Reel pitch option, the packaging quantity outlined in the table above will be doubled. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option see "Tape & Reel Packaging Information". (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 10 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Table 2A - Chip Thickness/Tape & Reel Packaging Quantities cont'd Plastic Quantity Paper Quantity1 Thickness Code Case Size1 Thickness Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel HC HD HE HF JB JC JD JE JF JO KB KC KD KE 1825 1825 1825 1825 2220 2220 2220 2220 2220 2220 2225 2225 2225 2225 1.150.15 1.30 0.15 1.40 0.15 1.50 0.15 1.00 0.15 1.10 0.15 1.30 0.15 1.40 0.15 1.50 0.15 2.40 0.15 1.00 0.15 1.10 0.15 1.30 0.15 1.40 0.15 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 1,000 1,000 1,000 1,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 2,000 4,000 4,000 4,000 4,000 Thickness Code Case Size1 Thickness Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel Paper Quantity1 Plastic Quantity Package quantity based on finished chip thickness specifications. 1 If ordering using the 2 mm Tape and Reel pitch option, the packaging quantity outlined in the table above will be doubled. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option see "Tape & Reel Packaging Information". Table 2B - Bulk Packaging Quantities Loose Packaging Packaging Type Bulk Bag (default) Packaging C-Spec1 N/A 2 Case Size Packaging Quantities (pieces/unit packaging) EIA (in) Metric (mm) 0402 0603 0805 1206 1210 1808 1812 1825 2220 2225 1608 2012 3216 3225 4520 4532 4564 5650 5664 Minimum Maximum 1005 50,000 1 20,000 The "Packaging C-Spec" is a 4 to 8 digit code which identifies the packaging type and/or product grade. When ordering, the proper code must be included in the 15th through 22nd character positions of the ordering code. See "Ordering Information" section of this document for further details. Commercial Grade product ordered without a packaging C-Spec will default to our standard "Bulk Bag" packaging. Contact KEMET if you require a bulk bag packaging option for Automotive Grade products. 2 A packaging C-Spec (see note 1 above) is not required for "Bulk Bag" packaging (excluding Anti-Static Bulk Bag and Automotive Grade products). The 15th through 22nd character positions of the ordering code should be left blank. All product ordered without a packaging C-Spec will default to our standard "Bulk Bag" packaging. 1 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 11 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Table 3 - Chip Capacitor Land Pattern Design Recommendations per IPC-7351 EIA Size Code Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) C Y X V1 V2 C Y X V1 V2 C Y X V1 V2 0402 1005 0.50 0.72 0.72 2.20 1.20 0.45 0.62 0.62 1.90 1.00 0.40 0.52 0.52 1.60 0.80 0603 1608 0.90 1.15 1.10 4.00 2.10 0.80 0.95 1.00 3.10 1.50 0.60 0.75 0.90 2.40 1.20 0805 2012 1.00 1.35 1.55 4.40 2.60 0.90 1.15 1.45 3.50 2.00 0.75 0.95 1.35 2.80 1.70 1206 3216 1.60 1.35 1.90 5.60 2.90 1.50 1.15 1.80 4.70 2.30 1.40 0.95 1.70 4.00 2.00 1210 3225 1.60 1.35 2.80 5.65 3.80 1.50 1.15 2.70 4.70 3.20 1.40 0.95 2.60 4.00 2.90 12101 3225 1.50 1.60 2.90 5.60 3.90 1.40 1.40 2.80 4.70 3.30 1.30 1.20 2.70 4.00 3.00 1808 4520 2.30 1.75 2.30 7.40 3.30 2.20 1.55 2.20 6.50 2.70 2.10 1.35 2.10 5.80 2.40 1812 4532 2.15 1.60 3.60 6.90 4.60 2.05 1.40 3.50 6.00 4.00 1.95 1.20 3.40 5.30 3.70 1825 4564 2.15 1.60 6.90 6.90 7.90 2.05 1.40 6.80 6.00 7.30 1.95 1.20 6.70 5.30 7.00 2220 5650 2.75 1.70 5.50 8.20 6.50 2.65 1.50 5.40 7.30 5.90 2.55 1.30 5.30 6.60 5.60 2225 5664 2.70 1.70 6.90 8.10 7.90 2.60 1.50 6.80 7.20 7.30 2.50 1.30 6.70 6.50 7.00 Only for capacitance values 22 F Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. KEMET only recommends wave soldering of EIA 0603, 0805, and 1206 case sizes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC Standard 7351 (IPC-7351). 1 Image below based on Density Level B for an EIA 1210 case size. V1 Y Y X X C C V2 Grid Placement Courtyard (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 12 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Soldering Process Recommended Soldering Technique: * Solder wave or solder reflow for EIA case sizes 0603, 0805 and 1206 * All other EIA case sizes are limited to solder reflow only Recommended Reflow Soldering Profile: KEMET's families of surface mount multilayer ceramic capacitors (SMD MLCCs) are compatible with wave (single or dual), convection, IR or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/ J-STD-020 standard for moisture sensitivity testing. These devices can safely withstand a maximum of three reflow passes at these conditions. Termination Finish SnPb TP 100% Matte Sn Preheat/Soak Temperature Minimum (TSmin) Temperature Maximum (TSmax) Time (tS) from TSmin to TSmax 100C 150C 60 - 120 seconds 150C 200C 60 - 120 seconds Ramp-Up Rate (TL to TP) 3C/second maximum 3C/second maximum Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60 - 150 seconds 60 - 150 seconds Peak Temperature (TP) 235C 260C Time Within 5C of Maximum Peak Temperature (tP) 20 seconds maximum 30 seconds maximum Ramp-Down Rate (TP to TL) 6C/second maximum 6C/second maximum Time 25C to Peak Temperature 6 minutes maximum 8 minutes maximum TL Temperature Profile Feature tP Maximum Ramp Up Rate = 3C/sec Maximum Ramp Down Rate = 6C/sec tL Tsmax Tsmin 25 ts 25C to Peak Time Note 1: All temperatures refer to the center of the package, measured on the capacitor body surface that is facing up during assembly reflow. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 13 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Table 4 - Performance & Reliability: Test Methods and Conditions Stress Reference Test or Inspection Method Terminal Strength JIS-C-6429 Appendix 1, Note: Force of 1.8 kg for 60 seconds. Board Flex JIS-C-6429 Appendix 2, Note: Standard termination system - 2.0 mm (minimum) for all except 3 mm for C0G. Flexible termination system - 3.0 mm (minimum). Magnification 50 X. Conditions: Solderability J-STD-002 a) Method B, 4 hours at 155C, dry heat at 235C b) Method B at 215C category 3 c) Method D, category 3 at 260C Temperature Cycling JESD22 Method JA-104 Biased Humidity MIL-STD-202 Method 103 Moisture Resistance MIL-STD-202 Method 106 Thermal Shock MIL-STD-202 Method 107 High Temperature Life MIL-STD-202 Method 108 /EIA-198 1,000 Cycles (-55C to +125C). Measurement at 24 hours +/- 4 hours after test conclusion. Load Humidity: 1,000 hours 85C/85% RH and rated voltage. Add 100 K ohm resistor. Measurement at 24 hours +/- 4 hours after test conclusion. Low Volt Humidity: 1,000 hours 85C/85% RH and 1.5 V. Add 100 K ohm resistor. Measurement at 24 hours +/- 4 hours after test conclusion. t = 24 hours/cycle. Steps 7a and 7b not required. Measurement at 24 hours +/- 4 hours after test conclusion. -55C/+125C. Note: Number of cycles required - 300. Maximum transfer time - 20 seconds. Dwell time - 15 minutes. Air - Air. 1,000 hours at 125C with 2 X rated voltage applied excluding the following: Case Size Capacitance 0603 & 0805 1.0 F 1206 & 1210 10 F Applied Voltage 1.5 X Storage Life MIL-STD-202 Method 108 150C, 0 VDC for 1,000 hours. Vibration MIL-STD-202 Method 204 5 g's for 20 minutes, 12 cycles each of 3 orientations. Note: Use 8" X 5" PCB 0.031" thick 7 secure points on one long side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10 - 2,000 Hz Mechanical Shock Resistance to Solvents MIL-STD-202 Method 213 MIL-STD-202 Method 215 Figure 1 of Method 213, Condition F. Add aqueous wash chemical, OKEM Clean or equivalent. Storage & Handling Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature-reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40C and maximum storage humidity not exceed 70% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulfur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within 1.5 years of receipt. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 14 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Construction (Typical) Detailed Cross Section Dielectric Material (BaTiO3) Barrier Layer (Ni) Termination Finish (100% Matte Sn) Dielectric Material (BaTiO3) End Termination/ External Electrode (Cu) Inner Electrodes (Ni) End Termination/ External Electrode (Cu) Barrier Layer (Ni) Termination Finish (100% Matte Sn) Inner Electrodes (Ni) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 15 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Capacitor Marking (Optional): These surface mount multilayer ceramic capacitors are normally supplied unmarked. If required, they can be marked as an extra cost option. Marking is available on most KEMET devices but must be requested using the correct ordering code identifier(s). If this option is requested, two sides of the ceramic body will be laser marked with a "K" to identify KEMET, followed by two characters (per EIA-198 - see table below) to identify the capacitance value. EIA 0603 case size devices are limited to the "K" character only. Laser marking option is not available on: * C0G, Ultra Stable X8R and Y5V dielectric devices * EIA 0402 case size devices * EIA 0603 case size devices with Flexible Termination option. * KPS Commercial and Automotive Grade stacked devices. EIA Case Size Metric Size Code Capacitance 0603 0805 1206 1210 1808 1812 1825 2220 2225 1608 2012 3216 3225 4520 4532 4564 5650 5664 170 pF 150 pF 910 pF 2,000 pF 3,900 pF 6,700 pF 0.018 F 0.027 F 0.033 F * X7R dielectric products in capacitance values outlined below Marking appears in legible contrast. Illustrated below is an example of an MLCC with laser marking of "KA8", which designates a KEMET device with rated capacitance of 100 F. Orientation of marking is vendor optional. KEMET ID (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com 2-Digit Capacitance Code C1002_X7R_SMD * 3/21/2017 16 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Capacitor Marking (Optional) cont'd Alpha Character Capacitance (pF) For Various Alpha/Numeral Identifiers Numeral 9 0 1 2 3 4 5 6 7 8 100,000,000 Capacitance (pF) A 0.1 10 10 100 1,000 10,000 100,000 1,000,000 10,000,000 B 0.11 1.1 11 110 1,100 11,000 110,000 1,100,000 11,000,000 110,000,000 C 0.12 12 12 120 1,200 12,000 120,000 1,200,000 12,000,000 120,000,000 D 0.13 13 13 130 1,300 13,000 130,000 1,300,000 13,000,000 130,000,000 E 0.15 15 15 150 1,500 15,000 150,000 1,500,000 15,000,000 150,000,000 160,000,000 F 0.16 16 16 160 1,600 16,000 160,000 1,600,000 16,000,000 G 0.18 18 18 180 1,800 18,000 180,000 1,800,000 18,000,000 180,000,000 H 0.2 20 20 200 2,000 20,000 200,000 2,000,000 20,000,000 200,000,000 J 0.22 22 22 220 2,200 22,000 220,000 2,200,000 22,000,000 220,000,000 K 0.24 2.4 24 240 2,400 24,000 240,000 2,400,000 24,000,000 240,000,000 L 0.27 2.7 27 270 2,700 27,000 270,000 2,700,000 27,000,000 270,000,000 M 0.3 30 30 300 3,000 30,000 300,000 3,000,000 30,000,000 300,000,000 N 0.33 33 33 330 3,300 33,000 330,000 3,300,000 33,000,000 330,000,000 P 0.36 36 36 360 3,600 36,000 360,000 3,600,000 36,000,000 360,000,000 Q 0.39 39 39 390 3,900 39,000 390,000 3,900,000 39,000,000 390,000,000 R 0.43 43 43 430 4,300 43,000 430,000 4,300,000 43,000,000 430,000,000 470,000,000 S 0.47 4.7 47 470 4,700 47,000 470,000 4,700,000 47,000,000 T 0.51 5.1 51 510 5,100 51,000 510,000 5,100,000 51,000,000 510,000,000 U 0.56 56 56 560 5,600 56,000 560,000 5,600,000 56,000,000 560,000,000 V 0.62 62 62 620 6,200 62,000 620,000 6,200,000 62,000,000 620,000,000 W 0.68 68 68 680 6,800 68,000 680,000 6,800,000 68,000,000 680,000,000 X 0.75 75 75 750 7,500 75,000 750,000 7,500,000 75,000,000 750,000,000 Y 0.82 82 82 820 8,200 82,000 820,000 8,200,000 82,000,000 820,000,000 Z 0.91 9.1 91 910 9,100 91,000 910,000 9,100,000 91,000,000 910,000,000 a 0.25 25 25 250 2,500 25,000 250,000 2,500,000 25,000,000 250,000,000 b 0.35 35 35 350 3,500 35,000 350,000 3,500,000 35,000,000 350,000,000 d 0.4 40 40 400 4,000 40,000 400,000 4,000,000 40,000,000 400,000,000 e 0.45 45 45 450 4,500 45,000 450,000 4,500,000 45,000,000 450,000,000 f 0.5 50 50 500 5,000 50,000 500,000 5,000,000 50,000,000 500,000,000 m 0.6 60 60 600 6,000 60,000 600,000 6,000,000 60,000,000 600,000,000 n 0.7 70 70 700 7,000 70,000 700,000 7,000,000 70,000,000 700,000,000 t 0.8 80 80 800 8,000 80,000 800,000 8,000,000 80,000,000 800,000,000 y 0.9 90 90 900 9,000 90,000 900,000 9,000,000 90,000,000 900,000,000 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 17 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Tape & Reel Packaging Information KEMET offers multilayer ceramic chip capacitors packaged in 8, 12 and 16 mm tape on 7" and 13" reels in accordance with EIA Standard 481. This packaging system is compatible with all tape-fed automatic pick and place systems. See Table 2 for details on reeling quantities for commercial chips. Bar Code Label Anti-Static Reel (R) Embossed Plastic* or Punched Paper Carrier. ET KEM Chip and KPS Orientation in Pocket (except 1825 Commercial, and 1825 and 2225 Military) Sprocket Holes Embossment or Punched Cavity 8 mm, 12 mm or 16 mm Carrier Tape 178 mm (7.00") or 330 mm (13.00") Anti-Static Cover Tape (.10 mm (.004") Maximum Thickness) *EIA 01005, 0201, 0402 and 0603 case sizes available on punched paper carrier only. Table 5 - Carrier Tape Configuration, Embossed Plastic & Punched Paper (mm) EIA Case Size Tape Size (W)* Embossed Plastic 7" Reel 13" Reel Pitch (P1)* Punched Paper 7" Reel 13" Reel Pitch (P1)* 01005 - 0402 8 2 2 0603 8 2/4 2/4 0805 8 4 4 4 4 1206 - 1210 8 4 4 4 4 1805 - 1808 12 4 4 1812 12 8 8 KPS 1210 12 8 8 KPS 1812 & 2220 16 12 12 Array 0508 & 0612 8 4 4 *Refer to Figures 1 & 2 for W and P1 carrier tape reference locations. *Refer to Tables 6 & 7 for tolerance specifications. New 2 mm Pitch Reel Options* Packaging Ordering Code (C-Spec) Packaging Type/Options C-3190 C-3191 C-7081 C-7082 Automotive grade 7" reel unmarked Automotive grade 13" reel unmarked Commercial grade 7" reel unmarked Commercial grade 13" reel unmarked * 2 mm pitch reel only available for 0603 EIA case size. 2 mm pitch reel for 0805 EIA case size under development. Benefits of Changing from 4 mm to 2 mm Pitching Spacing * Lower placement costs * Double the parts on each reel results in fewer reel changes and increased efficiency * Fewer reels result in lower packaging, shipping and storage costs, reducing waste (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 18 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ODo [10 pitches cumulative tolerance on tape 0.2 mm] Po E1 Ao F Ko B1 E2 Bo S1 W P1 T1 Center Lines of Cavity OD Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. 1 Embossment For cavity size, see Note 1 Table 4 User Direction of Unreeling Table 6 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 8 mm 12 mm 1.5 +0.10/-0.0 (0.059 +0.004/0.0) 16 mm D1 Minimum Note 1 1.0 (0.039) 1.5 (0.059) R Reference S1 Minimum T Note 2 Note 3 Maximum 25.0 (0.984) 1.75 0.10 4.0 0.10 2.0 0.05 0.600 0.600 (0.069 0.004) (0.157 0.004) (0.079 0.002) (0.024) (0.024) 30 (1.181) E1 P0 P2 T1 Maximum 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch 8 mm Single (4 mm) 12 mm Single (4 mm) & Double (8 mm) 16 mm Triple (12 mm) B1 Maximum Note 4 4.35 (0.171) 8.2 (0.323) 12.1 (0.476) E2 Minimum 6.25 (0.246) 10.25 (0.404) 14.25 (0.561) F P1 3.5 0.05 4.0 0.10 (0.138 0.002) (0.157 0.004) 5.5 0.05 8.0 0.10 (0.217 0.002) (0.315 0.004) 7.5 0.05 12.0 0.10 (0.138 0.002) (0.157 0.004) T2 Maximum 2.5 (0.098) 4.6 (0.181) 4.6 (0.181) W Maximum 8.3 (0.327) 12.3 (0.484) 16.3 (0.642) A0,B0 & K0 Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape with or without components shall pass around R without damage (see Figure 6). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481 paragraph 4.3 section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see Figure 3). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 4). (e) for KPS Series product, A0 and B0 are measured on a plane 0.3 mm above the bottom of the pocket. (f) see Addendum in EIA Standard 481 for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 19 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Figure 2 - Punched (Paper) Carrier Tape Dimensions T Po ODo [10 pitches cumulative tolerance on tape 0.2 mm] A0 F P1 T1 T1 Top Cover Tape W E2 B0 Bottom Cover Tape E1 G Cavity Size, See Note 1, Table 7 Center Lines of Cavity Bottom Cover Tape User Direction of Unreeling Table 7 - Punched (Paper) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 E1 P0 P2 T1 Maximum G Minimum 8 mm 1.5 +0.10 -0.0 (0.059 +0.004 -0.0) 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 0.10 (0.004) Maximum R Reference Note 2 0.75 (0.030) 25 (0.984) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch 8 mm Half (2 mm) 8 mm Single (4 mm) E2 Minimum F P1 T Maximum W Maximum A0 B 0 6.25 (0.246) 3.5 0.05 (0.138 0.002) 2.0 0.05 (0.079 0.002) 4.0 0.10 (0.157 0.004) 1.1 (0.098) 8.3 (0.327) 8.3 (0.327) Note 1 1. The cavity defined by A0, B0 and T shall surround the component with sufficient clearance that: a) the component does not protrude beyond either surface of the carrier tape. b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. c) rotation of the component is limited to 20 maximum (see Figure 3). d) lateral movement of the component is restricted to 0.5 mm maximum (see Figure 4). e) see Addendum in EIA Standard 481 for standards relating to more precise taping requirements. 2. The tape with or without components shall pass around R without damage (see Figure 6). (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 20 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 3 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Maximum Width (mm) Rotation ( 8,12 20 16 - 200 10 Bo T) Typical Component Centerline Ao Figure 4 - Maximum Lateral Movement 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum s Tape Width (mm) 8,12 16 - 56 72 - 200 Maximum Rotation ( 20 10 5 Figure 5 - Bending Radius Embossed Carrier 16 mm Tape S) Punched Carrier 1.0 mm maximum 1.0 mm maximum R Bending Radius (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com R C1002_X7R_SMD * 3/21/2017 21 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Figure 6 - Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (O 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 8 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm Variable Dimensions -- Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) Shall accommodate tape width without interference 8 mm 12 mm 16 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 22 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) Figure 7 - Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 mm & 12 mm only END Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm Minimum Components 100 mm Minimum Leader 400 mm Minimum Top Cover Tape Figure 8 - Maximum Camber Elongated sprocket holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm Maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 23 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 - 250 VDC (Commercial Grade) KEMET Electronic Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1002_X7R_SMD * 3/21/2017 24 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kemet: C0402C102J3RACTU C0402C102J5RACTU C0402C102K3RACTU C0402C102K4RACTU C0402C102K5RACTU C0402C103J3RACTU C0402C103J4RACTU C0402C103K3RAC7411 C0402C103K3RACTU C0402C103K4RAC C0402C103K4RACTU C0402C103K5RACTU C0402C122K5RACTU C0402C151J3RACTU C0402C151J5RACTU C0402C151K5RACTU C0402C221J5RACTU C0402C221K5RACTU C0402C222J3RACTU C0402C222K3RACTU C0402C222K5RACTU C0402C181K5RACTU C0402C181M5RACTU C0402C152J5RACTU C0402C152K5RACTU C0402C271J5RACTU C0402C271K5RACTU C0402C271K8RACTU C0402C271M5RACTU C0402C272J3RACTU C0402C331J5RACTU C0402C392K3RACTU C0402C392K5RACTU C0402C562J4RACTU C0402C562K3RACTU C0402C562K5RACTU C0402C682K5RACTU C0402C272K3RACTU C0402C272K5RACTU C0402C331K5RACTU C0402C331M5RACTU C0402C332J4RACTU C0402C332K3RACTU C0402C332K4RACTU C0402C332K5RACTU C0603C102J1RACTU C0603C102J2RACTU C0603C102J3RACTM C0603C102J3RACTU C0603C102J4RACTU C0603C102J5RAC C0603C102J5RACTM C0603C102J5RACTU C0603C102K1RACTU C0603C102K2RACTU C0603C102K3RACTM C0603C102K3RACTU C0603C102K4RACTM C0603C102K4RACTU C0603C102K5RAC7040 C0603C102K5RAC7411 C0603C102K5RAC9028 C0603C102K5RACTM C0603C102K5RACTU C0402C391J5RACTU C0402C391K5RACTU C0402C392J3RACTU C0402C471J5RACTU C0402C471K3RACTU C0402C471K5RACTU C0402C471M5RACTU C0402C472J3RACTU C0402C472K3RACTU C0402C472K5RACTU C0402C561J5RACTU C0402C561K5RACTU C0402C681J5RACTU C0402C681K5RACTU C0402C681M5RACTU C0402C682J3RACTU C0402C682K3RACTU C0603C102K8RACTU C0603C102K9RACTU C0603C102M1RACTU C0603C102M2RACTU C0603C102M3RACTU C0603C102M4RACTU C0603C102M5RACTU C0603C103J1RACTU C0603C103J3RACTM C0603C103J3RACTU C0603C103J4RACTU C0603C103J5RACTM C0603C103J5RACTU C0603C103J8RACTU C0603C103K1RACTU C0603C103K3RACTM C0603C103K3RACTU C0603C103K4RACTM C0603C103K4RACTU