MC74LCX245 Low-Voltage CMOS Octal Transceiver With 5 V-Tolerant Inputs and Outputs (3-State, Non-Inverting) The MC74LCX245 is a high performance, non-inverting octal transceiver operating from a 2.0 to 5.5 V supply. High impedance TTL compatible inputs significantly reduce current loading to input drivers while TTL compatible outputs offer improved switching noise performance. A VI specification of 5.5 V allows MC74LCX245 inputs to be safely driven from 5 V devices if VCC is less than 5.0 V. The MC74LCX245 is suitable for memory address driving and all TTL level bus oriented transceiver applications. Current drive capability is 24 mA at both A and B ports. The Transmit/Receive (T/R) input determines the direction of data flow through the bi-directional transceiver. Transmit (active-HIGH) enables data from A ports to B ports; Receive (active-LOW) enables data from B to A ports. The Output Enable input, when HIGH, disables both A and B ports by placing them in a HIGH Z condition. http://onsemi.com MARKING DIAGRAMS 20 20 1 20 20 1 TSSOP-20 DT SUFFIX CASE 948E 1 Designed for 2.0 to 5.5 V VCC Operation 5 V Tolerant - Interface Capability With 5 V TTL Logic Supports Live Insertion and Withdrawal LCX 245 ALYWG G 20 IOFF Specification Guarantees High Impedance When VCC = 0 V LVTTL Compatible 20 LVCMOS Compatible 1 SOEIAJ-20 M SUFFIX CASE 967 1 24 mA Balanced Output Sink and Source Capability 74LCX245 AWLYWWG 1 Near Zero Static Supply Current in All Three Logic States (10 mA) Substantially Reduces System Power Requirements Latchup Performance Exceeds 500 mA * * ESD Performance: * LCX245 AWLYYWWG 1 Features * * * * * * * * SOIC-20 DW SUFFIX CASE 751D QFN20 MN SUFFIX CASE 485AA Human Body Model >2000 V Machine Model >200 V Pb-Free Packages are Available* A L, WL Y, YY W, WW G or G LCX 245 ALYWG G = Assembly Location = Wafer Lot = Year = Work Week = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2009 December, 2009 - Rev. 9 1 Publication Order Number: MC74LCX245/D MC74LCX245 VCC OE B0 B1 B2 B3 B4 B5 B6 B7 20 19 18 17 16 15 14 13 12 11 OE 19 T/R 1 A0 2 18 1 2 3 4 5 6 7 T/R A0 A1 A2 A3 A4 A5 19 8 9 10 A6 A7 GND A1 3 17 12 A2 QFN PIN #1 16 10 A3 2 15 A4 A5 PINS FUNCTION OE T/R A0-A7 B0-B7 Output Enable Input Transmit/Receive Input Side A 3-State Inputs or 3-State Outputs Side B 3-State Inputs or 3-StateOutputs INPUTS OE T/R OPERATING MODE Non-Inverting L L B Data to A Bus L H A Data to B Bus H X Z Figure 2. Logic Diagram H = High Voltage Level L = Low Voltage Level Z = High Impedance State X = High or Low Voltage Level and Transitions are Acceptable For ICC reasons, Do Not Float Inputs http://onsemi.com 2 B6 9 11 TRUTH TABLE B5 8 12 A7 B4 7 13 A6 B3 6 14 PIN NAMES B2 5 9 Figure 1. Pinout (Top View) B1 4 11 20 B0 B7 MC74LCX245 MAXIMUM RATINGS Symbol Parameter VCC DC Supply Voltage VI DC Input Voltage VO DC Output Voltage Value Condition Unit -0.5 to +7.0 V -0.5 VI +7.0 V -0.5 VO +7.0 Output in 3-State V -0.5 VO VCC + 0.5 Output in HIGH or LOW State (Note 1) V IIK DC Input Diode Current -50 VI< GND mA IOK DC Output Diode Current -50 VO < GND mA +50 VO > VCC mA IO DC Output Source/Sink Current 50 mA ICC DC Supply Current Per Supply Pin 100 mA IGND DC Ground Current Per Ground Pin 100 mA TSTG Storage Temperature Range -65 to +150 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. IO absolute maximum rating must be observed. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Operating Data Retention Only Min Typ Max Unit 2.0 1.5 2.5, 3.3 2.5, 3.3 5.5 5.5 V 0 5.5 V 0 0 VCC 5.5 V VCC Supply Voltage VI Input Voltage VO Output Voltage IOH HIGH Level Output Current VCC = 3.0 V - 3.6 V VCC = 2.7 V - 3.0 V VCC = 2.3 V - 2.7 V - 24 - 12 -8 mA IOL LOW Level Output Current VCC = 3.0 V - 3.6 V VCC = 2.7 V - 3.0 V VCC = 2.3 V - 2.7 V + 24 + 12 +8 mA TA Operating Free-Air Temperature -55 +125 C Dt/DV Input Transition Rise or Fall Rate, VIN from 0.8 V to 2.0 V, VCC = 3.0 V 0 10 ns/V (HIGH or LOW State) (3-State) http://onsemi.com 3 MC74LCX245 DC ELECTRICAL CHARACTERISTICS TA = -55C to +125C Symbol VIH VIL VOH VOL Characteristic HIGH Level Input Voltage (Note 2) LOW Level Input Voltage (Note 2) HIGH Level Output Voltage LOW Level Output Voltage Condition Min 2.3 V VCC 2.7 V 1.7 2.7 V VCC 3.6 V 2.0 Max V 2.3 V VCC 2.7 V 0.7 2.7 V VCC 3.6 V 0.8 2.3 V VCC 3.6 V; IOL = 100 mA VCC - 0.2 VCC = 2.3 V; IOH = -8 mA 1.8 VCC = 2.7 V; IOH = -12 mA 2.2 VCC = 3.0 V; IOH = -18 mA 2.4 VCC = 3.0 V; IOH = -24 mA 2.2 Unit V V 2.3 V VCC 3.6 V; IOL = 100 mA 0.2 VCC = 2.3 V; IOL= 8 mA 0.6 VCC = 2.7 V; IOL= 12 mA 0.4 VCC = 3.0 V; IOL = 16 mA 0.4 VCC = 3.0 V; IOL = 24 mA 0.55 V II Input Leakage Current 2.3 V VCC 3.6 V; 0 V VI 5.5 V 5 mA IOZ 3-State Output Current 2.3 VCC 3.6 V; 0V VO 5.5 V; VI = VIH or V IL 5 mA IOFF Power-Off Leakage Current VCC = 0 V; VI or VO = 5.5 V 10 mA ICC Quiescent Supply Current 2.3 VCC 3.6 V; VI = GND or VCC 10 mA 2.3 VCC 3.6 V; 3.6 VI or VO 5.5 V 10 2.3 VCC 3.6 V; VIH = VCC - 0.6 V 500 DICC Increase in ICC per Input mA 2. These values of VI are used to test DC electrical characteristics only. AC CHARACTERISTICS tR = tF = 2.5 ns; RL = 500 W Limits TA = -55C to +125C Symbol Parameter VCC = 3.3 V 0.3V VCC = 2.7 V VCC = 2.5 V 0.2V VCC = 5.0 V CL = 50 pF CL = 50 pF CL = 30 pF CL = 50 pF Waveform Min Max Min Max Min Max Min Max Unit tPLH tPHL Propagation Delay Input to Output 1 1.5 1.5 7.0 7.0 1.5 1.5 8.0 8.0 1.5 1.5 8.4 8.4 1.5 1.5 5.0 5.0 ns tPZH tPZL Output Enable Time to High and Low Level 2 1.5 1.5 8.5 8.5 1.5 1.5 9.5 9.5 1.5 1.5 10.5 10.5 1.5 1.5 7.0 7.0 ns tPHZ tPLZ Output Disable Time From High and Low Level 2 1.5 1.5 7.5 7.5 1.5 1.5 8.5 8.5 1.5 1.5 9.0 9.0 1.5 1.5 6.0 6.0 ns tOSHL tOSLH Output-to-Output Skew (Note 3) 1.0 1.0 ns 1.0 1.0 1.0 1.0 1.0 1.0 3. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH); parameter guaranteed by design. http://onsemi.com 4 MC74LCX245 DYNAMIC SWITCHING CHARACTERISTICS TA = +25C Symbol Characteristic Condition Min Typ Max Unit VOLP Dynamic LOW Peak Voltage (Note 4) VCC = 3.3 V, CL = 50 pF, VIH = 3.3 V, VIL = 0 V VCC = 2.5 V, CL = 30 pF, VIH = 2.5 V, VIL = 0 V 0.8 0.6 V V VOLV Dynamic LOW Valley Voltage (Note 4) VCC = 3.3 V, CL = 50 pF, VIH = 3.3 V, VIL = 0 V VCC = 2.5 V, CL = 30 pF, VIH = 2.5 V, VIL = 0 V -0.8 -0.6 V V 4. Number of outputs defined as "n". Measured with "n-1" outputs switching from HIGH-to-LOW or LOW-to-HIGH. The remaining output is measured in the LOW state. CAPACITIVE CHARACTERISTICS Symbol Parameter Condition Typical Unit CIN Input Capacitance VCC = 3.3 V, VI = 0 V or VCC 7 pF CI/O Input/Output Capacitance VCC = 3.3 V, VI = 0 V or VCC 8 pF CPD Power Dissipation Capacitance 10 MHz, VCC = 3.3 V, VI = 0 V or VCC 25 pF VCC OE, T/R Vmi VCC An, Bn Vmi Vmi tPLH Bn, An tPZH 0V tPHL Vmo Vmi An, Bn Vmo VOH Vmo tPHZ tPZL VOL WAVEFORM 1 - PROPAGATION DELAYS tR = tF = 2.5 ns, 10% to 90%; f = 1 MHz; tW = 500 ns VOH VHZ tPLZ Vmo An, Bn 0V VLZ VOL WAVEFORM 2 - OUTPUT ENABLE AND DISABLE TIMES tR = tF = 2.5 ns, 10% to 90%; f = 1 MHz; tW = 500 ns Figure 3. AC Waveforms VCC Symbol 3.3 V + 0.3 V 2.7 V 2.5 V + 0.2 V 5.0 V Vmi 1.5 V 1.5 V VCC/2 VCC/2 Vmo 1.5 V 1.5 V VCC/2 VCC/2 VHZ VOL + 0.3 V VOL + 0.3 V VOL + 0.15 V VOL + 0.15 V VLZ VOH - 0.3 V VOH - 0.3 V VOH - 0.15 V VOH - 0.15 V http://onsemi.com 5 MC74LCX245 VCC PULSE GENERATOR DUT RT CL TEST RL SWITCH tPLH, tPHL Open tPZL, tPLZ 6 V at VCC = 3.3 0.3 V 6 V at VCC = 2.5 0.2 V Open Collector/Drain tPLH and tPHL 6V tPZH, tPHZ CL = CL = RL = RT = 6V OPEN GND R1 GND 50 pF at VCC = 3.3 0.3 V or equivalent (includes jig and probe capacitance) 30 pF at VCC = 2.5 0.2 V or equivalent (includes jig and probe capacitance) R1 = 500 W or equivalent ZOUT of pulse generator (typically 50 W) Figure 4. Test Circuit ORDERING INFORMATION Package Shipping MC74LCX245DW SOIC-20 38 Units / Rail MC74LCX245DWG SOIC-20 (Pb-Free) 38 Units / Rail MC74LCX245DWR2 SOIC-20 1000 Tape & Reel MC74LCX245DWR2G SOIC-20 (Pb-Free) 1000 Tape & Reel MC74LCX245DT TSSOP-20* 75 Units / Rail MC74LCX245DTG TSSOP-20* (Pb-Free) 75 Units / Rail MC74LCX245DTR2 TSSOP-20* 2000 Tape & Reel MC74LCX245DTR2G TSSOP-20* (Pb-Free) 2000 Tape & Reel MC74LCX245M SOEIAJ-20 40 Units / Rail MC74LCX245MG SOEIAJ-20 (Pb-Free) 40 Units / Rail MC74LCX245MEL SOEIAJ-20 2000 Tape & Reel MC74LCX245MELG SOEIAJ-20 (Pb-Free) 2000 Tape & Reel QFN20 (Pb-Free) 3000 Tape & Reel Device MC74LCX245MNTWG For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently Pb-Free. http://onsemi.com 6 MC74LCX245 PACKAGE DIMENSIONS SOIC-20 DW SUFFIX CASE 751D-05 ISSUE G A 20 11 X 45 _ E h 1 10 20X B B 0.25 M T A S B S A L H M 10X 0.25 NOTES: 1. DIMENSIONS ARE IN MILLIMETERS. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE PROTRUSION SHALL BE 0.13 TOTAL IN EXCESS OF B DIMENSION AT MAXIMUM MATERIAL CONDITION. q B M D 18X e A1 SEATING PLANE C T http://onsemi.com 7 DIM A A1 B C D E e H h L q MILLIMETERS MIN MAX 2.35 2.65 0.10 0.25 0.35 0.49 0.23 0.32 12.65 12.95 7.40 7.60 1.27 BSC 10.05 10.55 0.25 0.75 0.50 0.90 0_ 7_ MC74LCX245 PACKAGE DIMENSIONS TSSOP-20 DT SUFFIX CASE 948E-02 ISSUE B 20X 0.15 (0.006) T U 2X L K REF 0.10 (0.004) S M T U S V S IIII IIII IIII K K1 L/2 20 11 J J1 B -U- PIN 1 IDENT SECTION N-N 1 10 0.25 (0.010) N 0.15 (0.006) T U S M A -V- NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE. 5. DIMENSION K DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE K DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 7. DIMENSION A AND B ARE TO BE DETERMINED AT DATUM PLANE -W-. N F DETAIL E -W- C D G H DETAIL E 0.100 (0.004) -T- SEATING PLANE http://onsemi.com 8 DIM A B C D F G H J J1 K K1 L M MILLIMETERS MIN MAX 6.40 6.60 4.30 4.50 --1.20 0.05 0.15 0.50 0.75 0.65 BSC 0.27 0.37 0.09 0.20 0.09 0.16 0.19 0.30 0.19 0.25 6.40 BSC 0_ 8_ INCHES MIN MAX 0.252 0.260 0.169 0.177 --0.047 0.002 0.006 0.020 0.030 0.026 BSC 0.011 0.015 0.004 0.008 0.004 0.006 0.007 0.012 0.007 0.010 0.252 BSC 0_ 8_ MC74LCX245 PACKAGE DIMENSIONS SOEIAJ-20 M SUFFIX CASE 967-01 ISSUE A 20 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS AND ARE MEASURED AT THE PARTING LINE. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 5. THE LEAD WIDTH DIMENSION (b) DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE LEAD WIDTH DIMENSION AT MAXIMUM MATERIAL CONDITION. DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. MINIMUM SPACE BETWEEN PROTRUSIONS AND ADJACENT LEAD TO BE 0.46 ( 0.018). LE 11 Q1 E HE 1 M_ L 10 DETAIL P Z D e VIEW P A A1 b 0.13 (0.005) c M 0.10 (0.004) http://onsemi.com 9 DIM A A1 b c D E e HE L LE M Q1 Z MILLIMETERS MIN MAX --2.05 0.05 0.20 0.35 0.50 0.18 0.27 12.35 12.80 5.10 5.45 1.27 BSC 7.40 8.20 0.50 0.85 1.10 1.50 10 _ 0_ 0.70 0.90 --0.81 INCHES MIN MAX --0.081 0.002 0.008 0.014 0.020 0.007 0.011 0.486 0.504 0.201 0.215 0.050 BSC 0.291 0.323 0.020 0.033 0.043 0.059 10 _ 0_ 0.028 0.035 --0.032 MC74LCX245 PACKAGE DIMENSIONS QFN20 CASE 485AA-01 ISSUE A D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSIONS b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.25 AND 0.30 MM FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. A B PIN ONE REFERENCE DIM A A1 A2 A3 b D D2 E E2 e K L E 2X 0.15 C 2X MILLIMETERS MIN MAX 0.80 1.00 0.00 0.05 0.65 0.75 0.20 REF 0.20 0.30 2.50 BSC 0.85 1.15 4.50 BSC 2.85 3.15 0.50 BSC 0.20 --0.35 0.45 0.15 C 0.10 C A2 20X A 0.08 C (A3) SEATING PLANE A1 C D2 20X L 11 9 e 12 e E2 20X b 0.10 C A B 0.05 C NOTE 3 19 2 20X K 1 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 10 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MC74LCX245/D