05205 USB0403 - USB0424C Only One Name Means ProTek'TionTM 350 WATT LOW CAPACITANCE TVS ARRAY DESCRIPTION The USB04xx and USBxxC Series of devices are low capacitance TVS arrays available in a SOT-143 package. These devices are designed to protect Ethernet data I/O ports against the damaging effects of ESD and EFT transient threats. The USB04xx series are unidirectional devices used for common mode protection from line to ground. The USB04xxC series are bidirectional devices typically used for differential mode on balanced lines. Voltages range from 3.3 to 24 volts for both configurations. Each series provides ESD protection to > 25 kilovolts with a peak pulse power rating of 350 Watts for an 8/20s waveshape. The USB04xx and USBxxC series are designed to meet and exceed the IEC 61000-4-2 and IEC 61000-4-4 requirements. SOT-143 PACKAGE FEATURES APPLICATIONS * Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV * Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns * Compatible with IEC 61000-4-5 (Surge): 12A, 8/20s - Level 1(LineGnd) & Level 2(Line-Line) * 350 Watts Peak Pulse Power per Line (tp = 8/20s) * Unidirectional and Bidirectional Configurations * Available in Multiple Voltages Ranging from 3V to 24V * Protects 1 Line * Low Leakage Current * Low Capacitance: 5pF per Line Pair * RoHS Compliant * REACH Compliant * * * * Ethernet - 10/100/1000 Base T Cellular Phones Audio/Video Inputs FireWire, SCSI & USB Interfaces MECHANICAL CHARACTERISTICS * Molded JEDEC SOT-143 Package * Approximate Weight: 9 milligrams * Lead-Free Pure-Tin Plating (Annealed) * Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C * 8mm Tape and Reel Per EIA Standard 481 * Flammability Rating UL 94V-0 PIN CONFIGURATIONS 1 4 1 4 2 3 2 3 UNIDIRECTIONAL 05205.R7 9/16 BIDIRECTIONAL Page 1 ISO 9001: 2015 CERTIFIED 05205 USB0403 - USB0424C Only One Name Means ProTek'TionTM TYPICAL DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS TJ -55 to 150 C Storage Temperature TSTG -55 to 150 C Peak Pulse Power (tp = 8/20s) - See Figure 1 PPP 350 Watts Power Dissipation Pd 400 mW Thermal Resistance Junction to Ambient (Note 1) RJA 312 C/W Thermal Resistance Junction to Case RJC 250 C/W Operating Temperature NOTE Device mounted on a FR-4 PCB with the minimum suggested pad layout. ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified PART NUMBER (Notes 1 - 2) DEVICE MARKING RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE @0V, 1MHz VWM VOLTS @ 1mA V(BR) VOLTS @ IP = 5A VC VOLTS @ 8/20S V C @ I PP VOLTS @V WM ID A C pF USB0403 3U 3.3 4.0 9.0 19.0V @ 20.0A 125 5 USB0403C 3B 3.3 4.0 9.0 19.0V @ 20.0A 125 5 USB0405 5U 5.0 6.0 11.0 18.3V @ 17.0A 20 5 USB0405C 5B 5.0 6.0 11.0 18.3V @ 17.0A 20 5 USB0408 8U 8.0 8.5 16.6 18.5V @ 17.0A 10 5 USB0408C 8B 8.0 8.5 16.6 18.5V @ 17.0A 10 5 USB0412 12U 12.0 13.3 24.0 28.6V @ 11.0A 1 5 USB0412C 12B 12.0 13.3 24.0 28.6V @ 11.0A 1 5 USB0415 15U 15.0 16.6 30.0 31.8V @ 10.0A 1 5 USB0415C 15B 15.0 16.6 30.0 31.8V @ 10.0A 1 5 USB0424 24U 24.0 26.7 N/A 56.0V @ 6.0A 1 5 USB0424C 24B 24.0 26.7 N/A 56.0V @ 6.0A 1 5 NOTES 1. Part numbers with an additional "C" suffix are bidirectional devices, i.e., USB0405C. 2. Unidirectional Only: Positive potential is applied from pin 2 to 1 or pin 3 to 4. 05205.R7 9/16 Page 2 ISO 9001: 2015 CERTIFIED 05205 USB0403 - USB0424C Only One Name Means ProTek'TionTM TYPICAL DEVICE CHARACTERISTICS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - Watts 10,000 1,000 350W, 8/20s Waveform 100 10 0.1 10 100 td - Pulse Duration - s Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8s td = 20s e-t 60 40 10,000 FIGURE 3 POWER DERATING CURVE Peak Pulse Power 8/20s 80 % Of Rated Power tf 100 td = t/(IPP/2) 60 40 20 20 0 1,000 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 1 0 05205.R7 9/16 5 10 15 t - Time - s 20 25 0 30 Page 3 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - C 150 ISO 9001: 2015 CERTIFIED 05205 USB0403 - USB0424C Only One Name Means ProTek'TionTM TYPICAL DEVICE CHARACTERISTICS FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE FOR USB0405C 40 5 Volts per Division 30 20 10 0 ESD Test Pulse - 5 kilovolt, 1/30ns (Waveshape) FIGURE 5 INSERTION LOSS - USB0405C FIGURE 6 RETURN LOSS - USB0405C 20 10 db per Division 10 db per Division 20 Ref 0 -20 -50 -20 -50 100 MHz per Division 05205.R7 9/16 Ref 0 100 MHz per Division Page 4 ISO 9001: 2015 CERTIFIED 05205 USB0403 - USB0424C Only One Name Means ProTek'TionTM SPICE MODEL FIGURE 1 SPICE MODEL I/O I/O ABD ABD LCRD LCRD ABD LCRD LCRD Lg 0.8nH Lg 0.65nH UNIDIRECTIONAL BIDIRECTIONAL ABD - Avalanche Breakdown Diode (TVS) LCRD: Low Capacitance Rectifier Diode Lg - Lead Inductance TABLE 1 - SPICE PARAMETERS PARAMETER PART NUMBER 05205.R7 9/16 UNIT ABD(TVS) LCRD BV V See Table 2 200 IBV A 1 0.01 Cjo pF See Table 2 5 IS A See Table 2 1E-13 Vj V 0.6 0.6 M - 0.33 0.33 N - 1 1 RS Ohms See Table 2 0.31 TT s 1E-8 1E-9 EG eV 1.11 1.11 TABLE 2 - ABD SPECIFIC SPICE PARAMETERS I S (AMPS) B V(VOLTS) Cjo(pF) USB0403 4.5 200 USB0405 6.0 USB0408 8.5 USB0412 USB0415 USB0424 Rs(OHMS) 1E-11 0.22 140 1E-11 0.18 67 1E-11 0.12 13.3 55 1E-13 1.10 16.7 47 1E-13 1.43 26.7 28 1E-13 4.24 USB0403C 4.5 200 1E-11 0.22 USB0405C 6.0 140 1E-11 0.18 USB0408C 8.5 67 1E-11 0.12 USB0412C 13.3 55 1E-13 1.10 USB0415C 16.7 47 1E-13 1.43 USB0424C 26.7 28 1E-13 4.24 Page 5 ISO 9001: 2015 CERTIFIED 05205 USB0403 - USB0424C Only One Name Means ProTek'TionTM APPLICATION INFORMATION USB OUTPUT CONNECTOR GND SOLDER PAD 1 4 1 4 2 3 2 3 USB IC D+ D- FIGURE 1 - USB PROTECTION Two USB04xx (Unidirectional) in a Common-Mode configuration. Circuit connectivity is as follows: * Device 1: Line 1(D+) is connected to pins 2 and 3. * Device 2: Line 2(D-) is connected to pins 2 and 3. * Device 1 and 2: Pins 1 and 4 connected to ground R 1 4 2 3 RJ-45 ETHERNET TRANSCEIVER RX R TX FIGURE 2 - ETHERNET PROTECTION One USB04xxC (Bidirectional) in a Differential-Mode configuration. Circuit connectivity is as follow: * Line 1 (RX) is connected to pins 1 and 4. * Line 2 (TX) is connected to pins 2 and 3. CIRCUIT BOARD RECOMMENDATIONS Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended: * The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. * The path length between the TVS device and the protected line should be minimized. * All conductive loops including power and ground loops should be minimized. * The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. * Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. 05205.R7 9/16 Page 6 ISO 9001: 2015 CERTIFIED 05205 USB0403 - USB0424C Only One Name Means ProTek'TionTM SOT-143 PACKAGE INFORMATION A OUTLINE DIMENSIONS DIM MILLIMETERS INCHES MIN MAX MIN MAX A 2.80 3.04 0.110 0.120 B 1.20 1.39 0.047 0.055 C 0.84 1.14 0.033 0.045 D 0.39 0.50 0.015 0.020 F 0.79 0.93 0.031 0.037 G 1.78 2.03 0.070 0.080 J 0.08 0.15 0.003 0.006 K 0.46 0.60 0.018 0.024 L 0.445 0.60 0.0175 0.024 L1 0.40 0.60 0.016 0.024 R 0.72 0.83 0.028 0.033 S 2.11 2.48 0.083 0.098 L G B S J K L1 F D H C R NOTES 1. Dimensioning and tolerances per ANSI Y14.M, 1985. 2. Controlling dimension: inches. 3. Dimensions are exclusive of mold flash and metal burrs. PAD LAYOUT DIMENSIONS DIM MILLIMETERS A C INCHES MIN MAX MIN MAX A 1.88 2.13 0.074 0.084 B 1.80 2.06 0.071 0.081 C 0.71 0.97 0.028 0.038 D 0.76 1.02 0.030 0.040 E 1.07 1.32 0.042 0.052 F 0.71 0.97 0.028 0.038 B D E F NOTES 1. Controlling dimension: inches. 05205.R7 9/16 Page 7 ISO 9001: 2015 CERTIFIED 05205 USB0403 - USB0424C Only One Name Means ProTek'TionTM TAPE AND REEL P0 t 10 Pitches Cumulative Tolerance on Tape. 0.2 P2 D E Top Cover Tape Pin 1 A0 F W K0 B0 P User Direction of Feed SPECIFICATIONS REEL DIA. TAPE WIDTH 178mm (7") 8mm A0 B0 K0 D E F W P0 P2 P 3.10 0.10 2.70 0.10 1.35 0.10 1.50 0.10 1.75 0.10 3.50 0.05 8.00 0.30 4.00 0.10 2.00 0.05 4.00 0.10 tmax 0.25 NOTES 1. 2. 3. 4. 5. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7" Reel - 3,000 pieces per 8mm tape. Suffix - T13 = 13" Reel - 10,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and date code. ORDERING INFORMATION BASE PART NUMBER (xx = Voltage) LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE QTY USB04xx/USB04xxC -LF -T7 3000 7" n/a USB04xx/USB04xxC -LF -T13 10,000 13" n/a This device is only available in a Lead-Free configuration. 05205.R7 9/16 Page 8 ISO 9001: 2015 CERTIFIED 05205 USB0403 - USB0424C Only One Name Means ProTek'TionTM COMPANY INFORMATION COMPANY PROFILE In business more than 25 years, ProTek DevicesTM is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers LED wafer die for ESD protection and related high frequency products. ProTek Devices is ISO 9001:2015 certified. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Asia Sales: asiasales@protekdevices.com Europe Sales: europesales@protekdevices.com U.S. Sales: ussales@protekdevices.com Distributor Sales: distysales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT (c) ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05205.R7 9/16 Page 9 ISO 9001: 2015 CERTIFIED