Aluminum Electrolytic Capacitors (SMD Type) Hight-temperature assuranceize Surface Mount Type Series: HA Type: V HA S Features Endurance : 105 1000 h Vibration-proof product (30G guaranteed) is available upon request (8 ) RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current -40 to +105 6.3 V.DC to 100 V.DC 1 F to 1500 F 20 % (120 Hz / +20) I 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) Dissipation factor (tan ) Please see the attached characteristics list Rated voltageV.DC 6.3 10 16 25 35 50 63 100 Characteristics Z (-25 ) / Z (+20 ) 4 3 2 2 2 2 3 3 Impedance ratio at 120 Hz at low temperature Z (-40 ) / Z (+20 ) 8 6 4 4 3 3 4 4 After applying rated working voltage for 1000 hours at +105 2 and then being stabilized at +20 , capacitors shall meet the following limits. Capacitance change Within 20 % of the initial value (6.3 V.DC of miniature : 30 %) Endurance Dissipation factor (tan ) 200 % of the initial limit DC leakege current Within the initial limit After storage for 1000 hours at +105 2 with no voltage applied and then being Shelf life stabilized at +20 , capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 , capacitors shall meet the following limits. Resistance to Capacitance change Within 10 % of the initial value soldering heat Dissipation factor (tan ) Within the initial limit DC leakege current Within the initial limit Frequency correction factor for ripple current 50, 60 0.70 Frequency (Hz) Correction factor 1k 1.30 0.3 max. Rated voltage code Lot number A C E V 10 16 25 35 H J K 2A UnitV.DC 50 63 80 100 P W L Mark for Lead-Free I Series identification products (Black dot) R.voltage code B0.2 22 j HA H Capacitance (F) D0.5 Negative polarity A0.2 I Dimensions Example : 6.3 V.DC 22 F Marking color : BLACK marking (-) 10 k to 1.70 K Marking 120 1.00 Pressure Relief10and larger ( )Reference size Unitmm Size code B C D D E F G D 4.0 5.0 6.3 6.3 8.0 8.0 10.0 L A, B +0.1 -0.2 +0.1 -0.2 +0.1 -0.2 5.4 5.4 5.4 7.70.3 6.20.3 10.20.3 10.20.3 H 4.3 5.5 max. 5.3 6.5 max. 6.6 7.8 max. 6.6 7.8 max. 8.3 9.5 max. 8.3 10.0 max. 10 12.0 max. I W P K 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.650.1 0.650.1 0.650.1 0.650.1 0.650.1 0.900.2 0.900.2 1.0 1.5 1.8 1.8 2.2 3.1 4.6 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.700.2 0.700.2 The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 10-Sep-19 $OXPLQXP(OHFWURO\WLF&DSDFLWRUV 60'7\SH 'LPHQVLRQV 9LEUDWLRQSURRISURGXFWV 7KHVL]HDQGVKDSHDUHGLIIHUHQWIURPVWDQGDUGSURGXFWV3OHDVHLQTXLUHGHWDLOVRIRXUFRPSDQ\ 6L]HFRGH''! 6L]HFRGH()*+-..! , K 3 5 , 7 , / W (WR*/ 5HIHUHQFHVL]H 6XSSRUWLYH7HUPLQDOV % 6 + ' 3 5 T : / $ , . 6 % + ' ) $ ) 5HIHUHQFHVL]H 6XSSRUWLYH7HUPLQDOV +WR./ 6L]H FRGH ' / + $% PD[ ) , : 3 8QLW . ' WR ' ( ) * + - . . WR WR WR WR tWR tWR tWR tWR 5 6 7 /DQG3DGSDWWHUQ 7KHFLUFXLWERDUGODQGSDGSDWWHUQVL]HIRUFKLSFDSDFLWRUVLVVSHFLILHGLQWKHIROORZLQJWDEOH 7KHODQGSLWFKLQIOXHQFHVLQVWDOODWLRQVWUHQJWKDQGFRQVLGHULW 7DEOHRIERDUGODQGVL]HYVFDSDFLWRUVL]H 6L]HFRGH 6WDQGDUGSURGXFWV F E % & ' ' [/ ( [/ ) [/ * [/ + - . E D /DQGVSDFH 9LEUDWLRQSURRISURGXFWV F 7DEOHRIERDUGODQGVL]HYVFDSDFLWRUVL]H % $ $ % % * ( ' + ) & * * + 6L]HFRGH $ % & ' ' [/ ' [/ ( [/ ) [/ * + - . ( 8QLW ) * + :KHQVL]Hn$|LVZLGHEDFNILOOHWFDQEHPDGHGHFUHDVLQJILWWLQJVWUHQJWK & * ) 6L]HFRGH()*+-.! & E :KHQVL]HnD|LVZLGHEDFNILOOHWFDQEHPDGHGHFUHDVLQJILWWLQJVWUHQJWK 6L]HFRGH''! & 8QLW D 7DNHPRXQWLQJFRQGLWLRQVVROGHUDELOLW\DQGILWWLQJVWUHQJWKLQWRFRQVLGHUDWLRQ % ' % $ ( $ ZKHQVHOHFWLQJSDUWVIRU\RXUFRPSDQ\bVGHVLJQ 7KHYLEUDWLRQSURRIFDSDFLWRUVRIVL]HKDVVXSSRUWWHUPLQDOVH[WHQGLQJ IURPWKHERWWRPVLGHWRWKHOHDGHGJH7KHQPDNHVXUHWRILQGDSSURSULDWH VROGHULQJFRQGLWLRQVWRIRUPILOOHWRQWKHVXSSRUWWHUPLQDOVLIUHTXLUHGIRU % DSSHDUDQFHLQVSHFWLRQ Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 1000 h Rated voltage (V.DC) Capacitance (20 %) (F) 22 33 47 100 6.3 220 330 470 1000 1500 22 33 47 10 100 220 470 1000 10 22 33 47 16 100 220 330 470 680 Case size (mm) D L 4 4 4 5 5 6.3 6.3 6.3 8 8 8 10 10 4 4 5 5 6.3 8 6.3 8 8 10 10 4 4 5 5 5 6.3 6.3 8.0 6.3 8 10 8 10 8 10 10 5.4 5.4 5.4 5.4 5.4 5.4 5.4 7.7 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 6.2 7.7 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 7.7 10.2 10.2 10.2 10.2 10.2 10.2 10.2 Size code*1 B (B) (B) C (C) D (D) D8 F (F) (F) G G (B) (B) C (C) (D) E D8 F (F) G G B (B) C (C) (C) D (D) E D8 (F) G (F) G (F) G G Min. Specification Ripple *2 current (mA r.m.s.) 29 29 36 46 47 71 74 105 230 300 300 400 480 28 29 43 43 71 110 105 160 200 270 400 28 28 39 35 39 70 70 91 105 150 210 170 230 340 340 380 Part number tan Reflow *3 0.30 0.35 0.35 0.30 0.35 0.30 0.35 0.30 0.35 0.35 0.35 0.35 0.35 0.30 0.30 0.22 0.30 0.30 0.26 0.22 0.26 0.26 0.26 0.26 0.16 0.26 0.16 0.26 0.26 0.16 0.26 0.20 0.16 0.20 0.20 0.20 0.20 0.20 0.20 0.20 EEEHA0J220R EEEHA0J330WR EEEHA0J470WR EEEHA0J470R EEEHA0J101WR EEEHA0J101P EEEHA0J221WP EEEHA0J331XP EEEHA0J331P EEEHA0J471UP EEEHA0J102UP EEEHA0J102P EEEHA0J152P EEEHA1A220WR EEEHA1A330WR EEEHA1A330R EEEHA1A470WR EEEHA1A101WP EEEHA1A101P EEEHA1A221XP EEEHA1A221P EEEHA1A471UP EEEHA1A471P EEEHA1A102P EEEHA1C100R EEEHA1C220WR EEEHA1C220R EEEHA1C330WR EEEHA1C470WR EEEHA1C470P EEEHA1C101WP EEEHA1C101UP EEEHA1C221XP EEEHA1C221UP EEEHA1C221P EEEHA1C331UP EEEHA1C331P EEEHA1C471UP EEEHA1C471P EEEHA1C681P (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (2) (1) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (1) (2) (1) (2) (2) (2) (2) (2) (2) (2) Packaging Q'ty Taping (pcs) 2000 2000 2000 1000 1000 1000 1000 900 500 500 500 500 500 2000 2000 1000 1000 1000 1000 900 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 1000 900 500 500 500 500 500 500 500 *1: Size code( ) : Miniaturization product *2: Ripple current (120 Hz / +105 ) *3: tan (120 Hz / +20 ) Please refer to the page of "Refl ow Profi le" and "The Taping Dimensions". When requesting vibration-proof product, please put the last "V" instead to "P" Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 10-Sep-19 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 1000 h Rated voltage (V.DC) Capacitance (20 %) (F) 4.7 10 22 33 25 47 100 220 330 470 4.7 10 22 33 35 47 100 220 330 1 2.2 3.3 4.7 10 22 50 33 47 100 220 Case size (mm) D L 4 4 5 5 6.3 5 6.3 6.3 8 6.3 8 8 8 10 8 10 10 4 4 5 5 6.3 6.3 8 8 8 6.3 8 10 8 10 10 4 4 4 5 6.3 8 6.3 8 8 6.3 8 10 8 10 10 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 7.7 6.2 10.2 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 6.2 6.2 10.2 7.7 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 6.2 7.7 6.2 10.2 7.7 10.2 10.2 10.2 10.2 10.2 Size code*1 B (B) C (C) D (C) D (D) E D8 (E) F (F) G (F) G G B (B) C (C) D (D) E (E) F D8 (F) G (F) G G B B B C D E D8 (E) F D8 (F) G (F) G G Min. Specification Ripple *2 current (mA r.m.s.) 22 22 28 35 55 45 65 70 91 91 91 130 160 190 180 340 360 22 22 30 35 60 42 84 84 98 84 120 160 170 210 250 10 16 16 23 35 70 70 70 91 63 95 100 110 120 150 Part number tan Reflow *3 0.14 0.20 0.14 0.20 0.14 0.20 0.14 0.20 0.16 0.14 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.12 0.16 0.12 0.16 0.12 0.16 0.14 0.14 0.14 0.12 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 EEEHA1E4R7R EEEHA1E100WR EEEHA1E100R EEEHA1E220WR EEEHA1E220P EEEHA1E330WR EEEHA1E330P EEEHA1E470WP EEEHA1E470P EEEHA1E101XP EEEHA1E101UP EEEHA1E101P EEEHA1E221UP EEEHA1E221P EEEHA1E331UP EEEHA1E331P EEEHA1E471P EEEHA1V4R7R EEEHA1V100WR EEEHA1V100R EEEHA1V220WR EEEHA1V220P EEEHA1V330WP EEEHA1V330P EEEHA1V470UP EEEHA1V470P EEEHA1V101XP EEEHA1V101UP EEEHA1V101P EEEHA1V221UP EEEHA1V221P EEEHA1V331P EEEHA1H1R0R EEEHA1H2R2R EEEHA1H3R3R EEEHA1H4R7R EEEHA1H100P EEEHA1H220P EEEHA1H330XP EEEHA1H330UP EEEHA1H330P EEEHA1H470XP EEEHA1H470UP EEEHA1H470P EEEHA1H101UP EEEHA1H101P EEEHA1H221P (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (2) (2) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (2) (2) (2) (1) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (2) (1) (2) (2) (1) (2) (2) (2) (2) (2) Packaging Q'ty Taping (pcs) 2000 2000 1000 1000 1000 1000 1000 1000 1000 900 1000 500 500 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 1000 500 900 500 500 500 500 500 2000 2000 2000 1000 1000 1000 900 1000 500 900 500 500 500 500 500 *1: Size code( ) : Miniaturization product *2: Ripple current (120 Hz / +105 ) *3: tan (120 Hz / +20 ) Please refer to the page of "Refl ow Profi le" and "The Taping Dimensions". When requesting vibration-proof product, please put the last "V" instead to "P" Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 10-Sep-19 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 1000 h Rated voltage (V.DC) Capacitance (20 %) (F) 10 22 63 33 47 100 Case size (mm) Size code*1 Min. Specification Ripple Part number Reflow *3 Packaging Q'ty Taping (pcs) D L 8 6.2 E 25 0.18 EEEHA1J100P (2) 1000 8 6.2 (E) 25 0.18 EEEHA1J220UP (2) 1000 *2 current (mA r.m.s.) tan 8 10.2 F 30 0.18 EEEHA1J220P (2) 500 10 10.2 G 45 0.18 EEEHA1J330P (2) 500 8 10.2 (F) 45 0.18 EEEHA1J470UP (2) 500 10 10.2 G 50 0.18 EEEHA1J470P (2) 500 4.7 8 6.2 (E) 30 0.18 EEEHA2A4R7UP (2) 1000 10 8 10.2 F 55 0.18 EEEHA2A100P (2) 500 8 10.2 (F) 55 0.18 EEEHA2A220UP (2) 500 22 10 10.2 G 60 0.18 EEEHA2A220P (2) 500 33 10 10.2 G 65 0.18 EEEHA2A330P (2) 500 47 10 10.2 (G) 65 0.18 EEEHA2A470UP (2) 500 *1: Size code( ) : Miniaturization product *2: Ripple current (120 Hz / +105 ) *3: tan (120 Hz / +20 ) Please refer to the page of "Refl ow Profi le" and "The Taping Dimensions". When requesting vibration-proof product, please put the last "V" instead to "P" Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 10-Sep-19 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations> The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 01-Apr-19