SLIVER INTERNAL CABLED INTERCONNECT SOLUTION Connectors and Cable Assemblies Due to the latest high speed demands in networking equipment, TE Connectivity (TE) has developed a portfolio of Sliver internal cabled and card edge interconnects, including versions for SFF-TA-1002 that is one of the most flexible and highest performing solutions in the market. Sliver products can be used across many applications, data rates and protocols including PCI Express, SAS and Ethernet. With a proven 0.6mm contact pitch, Sliver products are high density, allowing you to fit more inside the enclosure while still enabling ease of routing. The contact leadframes are highly modular, enabling an increased number of lanes in a connector in a short lead time. TE provides a highly robust metal housing design on the cable connector with an active latch in the plug, providing additional connection security. This new technology simplifies design and helps lower overall costs by eliminating the need for re-timers and more costly lower-loss PCB materials while reaching speeds up to 56 Gbps with the use of TE high speed cable. Markets Applications * Data center & Networking Equipment * Internal Cabled Solutions * Servers * Chip to Chip * Switches * Chip to I/O * Routers * Chip to Backplane * High Performance Computing (HPC) * Board to Board * Storage Devices * PCB Card Edge (BTB) solutions * Wireless Base Stations and Radios * Supports Ethernet, PCIe, SAS, SATA, InfiniBand, and other custom protocols DATA AND DEVICES /// SLIVER INTERNAL CABLED INTERCONNECT SOLUTION Sliver Internal Cabled Interconnect Solution Ultimate flexibility in applications, data rates and protocols Vertical and right angle connector and cable solutions provide a flexible solution set in addition to allowing for both cabled and card edge interconnect designs. With a flexible pinout arrangement, multiple mounting and mating options, and the support of present and future data rate protocols, the Sliver interconnect solution provides a variety of configuration options to address your application needs. Free up design space The 0.6mm contact pitch is up to 30% denser than most existing solutions, allowing you to fit more inside the box. Reliable connections The Sliver interconnect solution provides a robust connector housing design while an active latch provides additional connection security for data critical applications. Lower design costs Sliver connector and cable assemblies can lower overall costs by eliminating the need for re-timers and more costly lower loss PCB materials. Key Features * 0.6mm pitch SMT connector design includes robust metal housing Application design flexibility * 12G and 25G high speed, low-loss 33AWG cable * Vertical, right angle and card edge configurations with active latch Mid-Board Cable Applications Horizontal Card Edge Applications * Supports 85 and 100 ohm impedance applications * Flexible pinout arrangement allows for mix of differential signal pairs and low speed single-ended sidebands Backplane/Midplane Applications * Flexible mounting and mating arrangements: * Cabled interconnects * Card edge interconnects Vertical Card Edge Applications Low Profile PCIe Add-In Card Applications TE's Sliver interconnect solution consists of: Vertical Board Mount Connector * Vertical to right-angle, vertical to straight, right-angle to rightangle, and right-angle to straight receptacle-to-plug mating * Platform developed to be scalable in x4/x8 increments Right Angle Board Mount Connector * Sliver: 24p (x4), 50p (x8) * Sliver for SFF-TA-1002: 28p (x4), 56p (x8) Right Angle Cable Plug Connector Straight Cable Plug Connector Card Edge Connector DATA AND DEVICES /// SLIVER INTERNAL CABLED INTERCONNECT SOLUTION * Supports present and future bandwidth needs without requiring requalification and redesign PAGE 2 Sliver Internal Cabled Interconnect Solution Part Number Details Connectors TE Part Numbers Part Description 50 Position 74 Position 124 Position Vertical PCB Connector 2292096-1 2324787-1 TBD Right Angle PCB Connector 2292055-1 2292069-1 2323321-1 148 Position Vertical PCB Card Edge Connector 2297117-2 Right Angle PCB Card Edge Connector 2331498-1 Plug Kits TE Part Numbers Part Description 50 Position 74 Position 124 Position Straight Plug Kit 2317815-1 2317823-1 2339107-1 Cable Assemblies TE Part Numbers 50 Position 74 Position Part Description Data Impedance Rate Straight Cable Plug 25G 85 Discrete pairs 2821742-1 2821742-2 2821376-1 Right Angle Plug 25G 85 Discrete pairs 2821743-1 2821743-2 Straight-Right Angle Plugs 25G 85 Discrete pairs 2821744-1 Straight Cable Plug 25G 100 Discrete pairs Right Angle Plug 25G 100 Straight-Right Angle Plugs 25G Straight Cable Plug Right Angle Plug Bulk Cable 0.5 Meter 1 Meter 0.5 Meter 1 Meter 2821376-2 - - 2821745-1 2821745-2 - - 2821744-2 2821746-1 2821746-2 - - 2821750-1 2821750-2 2821756-1 2821756-2 - - Discrete pairs 2821751-1 2821751-2 2821757-1 2821757-2 - - 100 Discrete pairs 2821752-1 2821752-2 2821758-1 2821758-2 - - 12G 85 Ribbon 2820397-1 2820397-2 2820396-1 2820396-2 - - 12G 85 Ribbon 2820399-1 2820399-2 2821385-1 2821385-2 - - Straight-Right Angle Plugs* 12G 85 Ribbon 2821638-1 2821638-2 2821639-1 2821639-2 - - Straight Cable Plug 12G 100 Ribbon 2821747-1 2821747-2 2821753-1 2821753-2 - - Right Angle Plug 12G 100 Ribbon 2821748-1 2821748-2 2821754-1 2821754-2 - - Straight-Right Angle Plugs 12G 100 Ribbon 2821749-1 2821749-2 2821755-1 - - Straight Cable Plug 12G 85 Discrete pairs - - 0.5 Meter - 1 Meter 124 Position 2821755-2 - 2324305-1 2324305-2 *Discrete pairs are optional for 12G platform Contact your TE representative about custom cable assembly configurations. DATA AND DEVICES /// SLIVER INTERNAL CABLED INTERCONNECT SOLUTION PAGE 3 Sliver Interconnects for SFF-TA-1002 NEW Sliver interconnect portfolio for SFF-TA-1002 The SFF-TA-1002 standard defines vertical, right angle, straddle mount and orthogonal connectors for servers and storage devices and has been adopted by several industry standards groups including COBO, Gen-Z, EDSFF and the Open Compute Project (OCP). Highest performing card edge connector for SFF-TA-1002 Our Sliver connectors have been adopted as the standard into SFF-TA-1002. The SFF-TA-1002 pinout supports EDSFF, PCIe, OCP NIC and other standards. Sliver for SFF-TA-1002 Vertical Connector Standardized designs Enable easy design in and multi-sourcing by consolidating fragmented pinouts and speeds. Supports high speed and density for next-generation silicon Sliver connectors for SFF-TA-1002 support high speeds through PCIe Gen 5, with a roadmap to 112G. They also support next-generation silicon PCIe lane counts where current products begin to max out. Sliver Power Module Sliver for SFF-TA-1002 Right Angle Connector The Sliver power module can be used with any SFF-TA-1002 vertical connector. This follows the same interface as EDSFF and can be used with a card edge or cable receptacle. Sliver for SFF-TA-1002 Straddle Mount Connector Sliver Power Module shown with Cabled Receptacle Sliver for SFF-TA-1002 Orthogonal Connector Sliver Power Module shown with Card Edge DATA AND DEVICES /// SLIVER INTERNAL CABLED INTERCONNECT SOLUTION Sliver Interconnects for SFF-TA-1002 Part Number Details Card Edge Receptacles TE Part Numbers Part Description Orientation Standard 56 Position 84 Position 140 Position 168 Position 280 Position Vertical SFF-TA-1002 2327679-1 2327678-1 2327677-1 - - Vertical N/A - - 2338718-1 - - Vertical N/A - - - 2333799-1 - Vertical SFF Derivative - - - - 2338461-1 Right Angle SFF-TA-1002 2327672-1 2327671-1 2327670-1 2336568-1 - Orthogonal SFF-TA-1002, EDSFF 2329207-1 2329208-1 - - - Orthogonal SFF-TA-1002, EDSFF 2339205-1 2339211-1 - - - Orthogonal SFF-TA-1002, EDSFF 2334227-1 TBD - - - Orthogonal SFF-TA-1002, EDSFF 2343147-1 TBD - - - Card Edge Receptacle, 1.57mm Host PCB Straddle SFF-TA-1002, OCP NIC 3.0 - 2340326-1 2340324-1 2340321-1 - Card Edge Receptacle, 1.57mm Host PCB Straddle N/A 2340331-1 - - - - Card Edge Receptacle, 1.93mm Host PCB Straddle SFF-TA-1002, OCP NIC 3.0 - - 1-2340324-2 1-2340321-2 - Card Edge Receptacle, 2.36mm Host PCB Straddle SFF-TA-1002, OCP NIC 3.0 - - 2-2340324-1 2-2340321-1 - Card Edge Receptacle Card Edge Receptacle + Power Card Edge Receptacle Card Edge Receptacle Card Edge Receptacle Card Edge Receptacle 1x1 SMT Card Edge Receptacle 1x4 SMT Card Edge Receptacle 1x1 PF Card Edge Receptacle 1x4 PF Receptacles for Cable Assemblies Part Description TE Part Numbers Orientation Standard 28 Position 56 Position 84 Position 140 Position Receptacle for Cable Assembly Vertical SFF-TA-1002 - 2332141-1 2331813-1 2332139-1 Receptacle for Cable Assembly Right Angle SFF-TA-1002 - 2332208-1 2331814-1 2332205-1 Receptacle for Cable Assembly Right Angle SFF Derivative 2345808-1 - - - TE Part Numbers Cable Assemblies Part Description 56 Position 0.5 Meter 1.0 Meter 84 Position Wire Size Straight to Straight Cable 85 33 AWG 2340872-1 2340872-2 2340783-1 2340783-2 2340879-1 2340879-2 Straight to R/A Cable 85 33 AWG 2340873-1 2340873-2 2340930-1 2340930-2 2340880-1 2340880-2 R/A to R/A Cable 85 33 AWG 2340874-1 2340874-2 2340789-1 2340789-2 2340881-1 2340881-2 Lateral to Lateral Cable 85 33 AWG 2343284-1 2343284-2 2340880-1 2340880-2 2343286-1 2343286-2 Straight to Straight Cable 85 30 AWG 2340876-1 2340876-2 2340861-1 2340861-2 2340882-1 2340882-2 Straight to R/A Cable 85 30 AWG 2340877-1 2340877-2 2340863-1 2340863-2 2340884-1 2340884-2 R/A to R/A Cable 85 30 AWG 2340878-1 2340878-2 2340865-1 2340865-2 2340885-1 2340885-2 Straight to Straight Cable 100 33 AWG 2349831-1 2349831-2 2349835-1 2349835-2 2349841-1 2349841-2 Straight to R/A Cable 100 33 AWG 2349832-1 2349832-2 2349838-1 2349838-2 2349842-1 2349842-2 R/A to R/A Cable 100 33 AWG 2349833-1 2349833-2 2349839-1 2349839-2 2349843-1 2349843-2 Lateral to Lateral Cable 100 33 AWG 2349834-1 2349834-2 2349840-1 2349840-2 2349844-1 2349844-2 All Cable Assemblies comply with SFF-TA-1002. Contact your local TE representative about custom cable assembly options. DATA AND DEVICES /// SLIVER INTERNAL CABLED INTERCONNECT SOLUTION 0.5 Meter 1.0 Meter 140 Position Impedance 0.5 Meter 1.0 Meter Sliver Internal Cabled Interconnect Solution TE Technical Support Center USA: 1.800.522.6752 Canada: 1.905.475.6222 Mexico: 52.0.55.1106.0800 Latin/S. America: 54.0.11.4733.2200 Germany: 49.0.6251.133.1999 UK: 44.0.800.267666 France: 33.0.1.3420.8686 Netherlands: 31.0.73.6246.999 China: 86.0.400.820.6015 te.com TE Connectivity, TE, and TE Connectivity (logo) are trademarks of the TE Connectivity Ltd. family of companies. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity`s obligations shall only be as set forth in TE Connectivity`s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. (c)2019 TE Connectivity Ltd. family of companies. All Rights Reserved. 1-1773871-5 04/2019 DND DATA AND DEVICES /// SLIVER INTERNAL CABLED INTERCONNECT SOLUTION