TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 1Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Solid Tantalum Surface Mount Capacitors
TANTAMOUNT®, Molded Case, Low ESR
FEATURES
• Terminations: 100 % matte tin, standard
tin/lead available
• Molded case available in seven case codes
• Compatible with “High Volume” automatic
pick and place equipment
• Mounting: Surface mount
• High ripple current carrying capability
•Low ESR
• Meets EIA 535BAAC and IEC specification
QC300801/US0001
• 100 % surge current tested (C, D, and E case sizes)
• Moisture sensitivity level 1
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
*Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40088
Operating Temperature: - 55 °C to + 85 °C
(to + 125 °C with voltage derating)
Capacitance Range: 0.47 μF to 1000 μF
Capacitance Tolerance: ± 10 %, ± 20 %
Voltage Rating: 4 VDC to 63 VDC
Notes
• We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating.
The EIA and CECC standards for low ESR solid tantalum chip capacitors, allow delta ESR of 1.25 times the datasheet limit after mounting.
• Dry pack is available per request, contact regional marketing.
ORDERING INFORMATION
TR3 D 107 K 010 C 0100
TYPE CASE CODE CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT + 85 °C
TERMINATION AND
PACKAGING
ESR
See Ratings
and Case
Codes table
This is expressed in
picofarads. The first two
digits are the significant
figures. The third is the
number of zeros
to follow.
K = ± 10 %
M = ± 20 % This is expressed in V.
To complete the three-digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an “R”
(6R3 = 6.3 V).
C = Matte tin/7" (178 mm) reels
D = Matte tin/13" (330 mm) reels
E = Tin/lead/7" (178 mm) reels
F = Tin/lead/13" (330 mm) reels
Maximum 100 kHz
ESR in m
.
See note below.
DIMENSIONS in inches [millimeters]
CASE CODE EIA SIZE L W H P TWTH (MIN.)
A 3216-18
0.126 ± 0.008
[3.2 ± 0.20] 0.063 ± 0.008
[1.6 ± 0.20] 0.063 ± 0.008
[1.6 ± 0.20] 0.031 ± 0.012
[0.80 ± 0.30] 0.047 ± 0.004
[1.2 ± 0.10] 0.028
[0.70]
B 3528-21
0.138 ± 0.008
[3.5 ± 0.20] 0.110 ± 0.008
[2.8 ± 0.20] 0.075 ± 0.008
[1.9 ± 0.20] 0.031 ± 0.012
[0.80 ± 0.30] 0.087 ± 0.004
[2.2 ± 0.10] 0.028
[0.70]
C 6032-28
0.236 ± 0.012
[6.0 ± 0.30] 0.126 ± 0.012
[3.2 ± 0.30] 0.098 ± 0.012
[2.5 ± 0.30] 0.051 ± 0.012
[1.3 ± 0.30] 0.087 ± 0.004
[2.2 ± 0.10] 0.039
[1.0]
D 7343-31 0.287 ± 0.012
[7.3 ± 0.30] 0.170 ± 0.012
[4.3 ± 0.30] 0.110 ± 0.012
[2.8 ± 0.30] 0.051 ± 0.012
[1.3 ± 0.30] 0.094 ± 0.004
[2.4 ± 0.10] 0.039
[1.0]
E 7343-43
0.287 ± 0.012
[7.3 ± 0.30] 0.169 ± 0.012
[4.3 ± 0.30] 0.157 ± 0.012
[4.0 ± 0.30] 0.051 ± 0.012
[1.3 ± 0.30] 0.094 ± 0.004
[2.4 ± 0.10] 0.039
[1.0]
V 7343-20 0.287 ± 0.012
[7.3 ± 0.30] 0.169 ± 0.012
[4.3 ± 0.30] 0.079 max.
[2.0 max.] 0.051 ± 0.012
[1.3 ± 0.30] 0.094 ± 0.004
[2.4 ± 0.10] 0.039
[1.0]
W 7361-38 0.287 ± 0.012
[7.3 ± 0.30] 0.236 ± 0.012
[6.0 ± 0.30] 0.138 ± 0.012
[3.5 ± 0.30] 0.047 ± 0.008
[1.2 ± 0.20] 0.122 ± 0.004
[3.1 ± 0.10] 0.069
[1.75]
H
WTW
P
L
TH
(MIN.)
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 2Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RATINGS AND CASE CODES
μF 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 63 V
0.47 A
0.68 A
1.0 A A A/B B/C
1.5 A B/C B/C
2.2 A A A A/B B/C B/C/D
3.3 A A/B A/B B/C C/D
4.7 A A/B A/B A/B/C B/C/D C/D/E D
6.8 A A/B A/B B/C C/D/E D/E
10 A A/B A/B/C B/C B/C/D C/D/E D/E E
15 A A A/B B/C B/C B/C/D D/E E
22 A A/B A/B/C B/C/D B/C/D
C/D/E/V D/E
33 A/B A/B B/C B/C/D C/D D/E
47 A/B A/B/C B/C/D C/D D/E D/E
68 B/C B/C/D B/C/D/E/V D D/E E/W
100 A/B/C B/C/D/V B/C/D/E/V D/E D/E/W W
150 B/C/D C/D/E C/D/E D/E W
220 B/C/D C/D/E/V D/E/V E
330 D D/E/W D/E/W
470 D/E D/E/W E/W
680 D/E E
1000 E E
MARKING
“A” CASE VOLTAGE CODE
VOLTS CODE
4.0 G
6.3 J
10 A
16 C
20 D
25 E
35 V
50 T
Marking
Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” Case capacitors use a letter
code for the voltage and EIA capacitance code.
The Vishay Sprague® trademark is included if space permits. Capacitors rated at 6.3 V are marked 6 V.
A manufacturing date code is marked on all capacitors.
Call the factory for further explanation.
Capacitance Code, pF
Indicates Low ESR
Polarity Band (+)
Voltage
Code
V104R
A Case
Date Code Vishay
Sprague Logo
Indicates Low ESR
Voltage
Capacitance μF
Polarity
Band (+)
22 R10
XX 2
B, C, D, E, V Cases
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 3Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C
15 A TR3A156(1)004(2)1500 0.6 6 1.500 0.22
22 A TR3A226(1)004(2)1500 0.9 6 1.500 0.22
33 A TR3A336(1)004(2)1500 1.3 6 1.500 0.22
33 B TR3B336(1)004(2)0500 1.3 6 0.500 0.41
47 A TR3A476(1)004(2)0800 1.9 14 0.800 0.31
47 A TR3A476(1)004(2)0500 1.9 14 0.500 0.39
47 B TR3B476(1)004(2)0500 1.9 6 0.500 0.41
68 B TR3B686(1)004(2)0500 2.7 6 0.500 0.41
68 C TR3C686(1)004(2)0275 2.7 6 0.275 0.63
100 A TR3A107M004(2)1000 10.0 30 1.000 0.27
100 B TR3B107(1)004(2)0450 4.0 8 0.450 0.43
100 C TR3C107(1)004(2)0225 4.0 6 0.225 0.70
150 B TR3B157(1)004(2)0900 6.0 14 0.900 0.31
150 B TR3B157(1)004(2)0500 6.0 14 0.500 0.41
150 B TR3B157(1)004(2)0400 6.0 14 0.400 0.46
150 C TR3C157(1)004(2)0250 6.0 12 0.250 0.66
150 D TR3D157(1)004(2)0150 6.0 8 0.150 1.00
220 B TR3B227M004(2)1100 8.8 18 1.100 0.28
220 B TR3B227M004(2)0700 8.8 18 0.700 0.35
220 B TR3B227M004(2)0500 8.8 18 0.500 0.41
220 B TR3B227M004(2)0450 8.8 18 0.450 0.43
220 C TR3C227(1)004(2)0200 8.8 8 0.200 0.74
220 D TR3D227(1)004(3)0050 8.8 8 0.050 1.73
220 D TR3D227(1)004(2)0150 8.8 8 0.150 1.00
220 D TR3D227(1)004(2)0100 8.8 8 0.100 1.22
330 D TR3D337(1)004(2)0100 13.2 8 0.100 1.22
330 D TR3D337(1)004(3)0045 13.2 8 0.045 1.83
330 D TR3D337(1)004(3)0035 13.2 8 0.035 2.07
330 D TR3D337(1)004(2)0150 13.2 8 0.150 1.00
470 D TR3D477(1)004(2)0125 18.8 10 0.125 1.10
470 D TR3D477(1)004(2)0100 18.8 10 0.100 1.22
470 D TR3D477(1)004(2)0060 18.8 10 0.060 1.58
470 D TR3D477(1)004(3)0045 18.8 10 0.045 1.83
470 D TR3D477(1)004(3)0035 18.8 10 0.035 2.07
470 E TR3E477(1)004(2)0100 18.8 10 0.100 1.28
470 E TR3E477(1)004(3)0045 18.8 10 0.045 1.91
470 E TR3E477(1)004(3)0035 18.8 10 0.035 2.17
680 D TR3D687M004(2)0100 27.2 25 0.100 1.22
680 D TR3D687M004(3)0060 27.2 25 0.060 1.58
680 E TR3E687(1)004(2)0100 27.2 12 0.100 1.28
1000 E TR3E108M004(2)0100 40.0 20 0.100 1.28
6.3 VDC AT + 85 °C; 4 VDC AT 125 °C
10 A TR3A106(1)6R3(2)2000 0.6 6 2.000 0.19
10 A TR3A106(1)6R3(2)1500 0.6 6 1.500 0.22
15 A TR3A156(1)6R3(2)2000 0.9 6 2.000 0.19
15 A TR3A156(1)6R3(2)1000 0.9 6 1.000 0.27
22 A TR3A226(1)6R3(2)3000 1.4 6 3.000 0.16
22 A TR3A226(1)6R3(2)2000 1.4 6 2.000 0.19
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 4Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
6.3 VDC AT + 85 °C; 4 VDC AT 125 °C
22 A TR3A226(1)6R3(2)1000 1.4 6 1.000 0.27
22 A TR3A226(1)6R3(2)0900 1.4 6 0.900 0.29
22 B TR3B226(1)6R3(2)0600 1.4 6 0.600 0.38
33 A TR3A336(1)6R3(2)2000 2.0 14 2.000 0.19
33 A TR3A336(1)6R3(2)0800 2.0 14 0.800 0.31
33 A TR3A336(1)6R3(2)0600 2.0 14 0.600 0.35
33 B TR3B336(1)6R3(2)0450 2.0 6 0.450 0.43
33 B TR3B336(1)6R3(2)0350 2.0 6 0.350 0.49
33 B TR3B336(1)6R3(2)0600 2.0 6 0.600 0.38
33 B TR3B336(1)6R3(2)0500 2.0 6 0.500 0.41
47 A TR3A476(1)6R3(2)0800 3.0 12 0.800 0.31
47 B TR3B476(1)6R3(2)0550 3.0 6 0.550 0.39
47 B TR3B476(1)6R3(2)0500 3.0 6 0.500 0.41
47 B TR3B476(1)6R3(2)0350 3.0 6 0.350 0.49
47 B TR3B476(1)6R3(2)0250 3.0 6 0.250 0.58
47 C TR3C476(1)6R3(2)0300 3.0 6 0.300 0.61
47 C TR3C476(1)6R3(2)0250 3.0 6 0.250 0.66
68 B TR3B686(1)6R3(2)0650 4.3 6 0.650 0.36
68 B TR3B686(1)6R3(2)0550 4.3 6 0.550 0.39
68 B TR3B686(1)6R3(2)0500 4.3 6 0.500 0.41
68 B TR3B686(1)6R3(2)0350 4.3 6 0.350 0.49
68 B TR3B686(1)6R3(2)0250 4.3 6 0.250 0.58
68 C TR3C686(1)6R3(2)0275 4.3 6 0.275 0.63
68 C TR3C686(1)6R3(2)0250 4.3 6 0.250 0.66
68 C TR3C686(1)6R3(2)0200 4.3 6 0.200 0.74
68 D TR3D686(1)6R3(2)0200 4.3 6 0.200 0.87
68 D TR3D686(1)6R3(2)0175 4.3 4 0.175 0.93
100 B TR3B107(1)6R3(2)1500 6.3 15 1.500 0.24
100 B TR3B107(1)6R3(2)0500 6.3 15 0.500 0.41
100 B TR3B107(1)6R3(2)0400 6.3 15 0.400 0.46
100 C TR3C107(1)6R3(2)0300 6.3 6 0.300 0.61
100 C TR3C107(1)6R3(2)0250 6.3 6 0.250 0.66
100 C TR3C107(1)6R3(2)0150 6.3 6 0.150 0.86
100 C TR3C107(1)6R3(2)0125 6.3 6 0.125 0.94
100 D TR3D107(1)6R3(2)0150 6.3 6 0.150 1.00
100 D TR3D107(1)6R3(2)0140 6.3 6 0.140 1.04
100 V TR3V107(1)6R3(3)0200 6.3 8 0.200 0.79
100 V TR3V107(1)6R3(3)0150 6.3 8 0.150 0.91
150 C TR3C157(1)6R3(2)0300 9.4 8 0.300 0.61
150 C TR3C157(1)6R3(2)0200 9.4 8 0.200 0.74
150 D TR3D157(1)6R3(2)0150 9.4 8 0.150 1.00
150 D TR3D157(1)6R3(2)0125 9.4 8 0.125 1.10
150 D TR3D157(1)6R3(2)0075 9.4 8 0.075 1.41
150 D TR3D157(1)6R3(2)0070 9.4 8 0.070 1.46
150 D TR3D157(1)6R3(3)0050 9.4 8 0.050 1.73
150 E TR3E157(1)6R3(2)0100 9.4 8 0.100 1.28
220 C TR3C227(1)6R3(2)0300 13.9 14 0.300 0.61
220 C TR3C227(1)6R3(2)0250 13.9 14 0.250 0.66
220 C TR3C227(1)6R3(2)0225 13.9 14 0.225 0.70
220 D TR3D227(1)6R3(2)0150 13.9 8 0.150 1.00
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 5Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
6.3 VDC AT + 85 °C; 4 VDC AT 125 °C
220 D TR3D227(1)6R3(2)0100 13.9 8 0.100 1.22
220 D TR3D227(1)6R3(3)0050 13.9 8 0.050 1.73
220 E TR3E227(1)6R3(2)0150 13.9 8 0.150 1.05
220 E TR3E227(1)6R3(2)0100 13.9 8 0.100 1.28
220 V TR3V227(1)6R3(3)0100 13.9 10 0.100 1.12
220 V TR3V227(1)6R3(3)0150 13.9 10 0.150 0.91
330 D TR3D337(1)6R3(2)0150 20.8 8 0.150 1.00
330 D TR3D337(1)6R3(2)0125 20.8 8 0.125 1.10
330 D TR3D337(1)6R3(2)0100 20.8 8 0.100 1.22
330 D TR3D337(1)6R3(2)0060 20.8 8 0.060 1.58
330 D TR3D337(1)6R3(3)0050 20.8 8 0.050 1.73
330 D TR3D337(1)6R3(3)0045 20.8 8 0.045 1.83
330 D TR3D337(1)6R3(3)0035 20.8 8 0.035 2.07
330 E TR3E337(1)6R3(2)0150 20.8 8 0.150 1.05
330 E TR3E337(1)6R3(2)0100 20.8 8 0.100 1.28
330 E TR3E337(1)6R3(2)0050 20.8 8 0.050 1.82
330 W TR3W337(1)6R3(3)0100 20.8 8 0.100 1.58
330 W TR3W337(1)6R3(3)0060 20.8 8 0.060 2.04
470 D TR3D477(1)6R3(2)0200 29.6 14 0.200 0.87
470 D TR3D477(1)6R3(2)0150 29.6 14 0.150 1.00
470 D TR3D477(1)6R3(2)0125 29.6 14 0.125 1.10
470 D TR3D477(1)6R3(3)0100 29.6 14 0.100 1.22
470 E TR3E477(1)6R3(2)0100 29.6 10 0.100 1.28
470 E TR3E477(1)6R3(3)0065 29.6 10 0.065 1.59
470 E TR3E477(1)6R3(3)0060 29.6 10 0.060 1.66
470 E TR3E477(1)6R3(3)0050 29.6 10 0.050 1.82
470 W TR3W477(1)6R3(3)0100 29.6 20 0.100 1.58
470 W TR3W477(1)6R3(3)0060 29.6 20 0.060 2.04
470 W TR3W477(1)6R3(3)0050 29.6 20 0.050 2.24
680 E TR3E687(1)6R3(2)0100 42.8 20 0.100 1.28
1000 E TR3E108M6R3(2)0200 63.0 30 0.200 0.91
1000 E TR3E108M6R3(2)0150 63.0 30 0.150 1.05
1000 E TR3E108M6R3(3)0100 63.0 30 0.100 1.28
10 VDC AT + 85 °C; 7 VDC AT 125 °C
2.2 A TR3A225(1)010(2)6800 0.5 6 6.800 0.11
2.2 A TR3A225(1)010(2)6000 0.5 6 6.000 0.11
2.2 A TR3A225(1)010(2)1800 0.5 6 1.800 0.20
4.7 A TR3A475(1)010(2)3000 0.5 6 3.000 0.16
4.7 A TR3A475(1)010(2)1500 0.5 6 1.500 0.22
4.7 A TR3A475(1)010(2)1400 0.5 6 1.400 0.23
4.7 A TR3A475(1)010(2)1000 0.5 6 1.000 0.27
6.8 A TR3A685(1)010(2)1800 0.7 6 1.800 0.20
6.8 A TR3A685(1)010(2)3000 0.7 6 3.000 0.16
10 A TR3A106(1)010(2)2000 1.0 6 2.000 0.19
10 A TR3A106(1)010(2)1800 1.0 6 1.800 0.20
10 A TR3A106(1)010(2)1000 1.0 6 1.000 0.27
10 A TR3A106(1)010(2)0900 1.0 6 0.900 0.29
10 B TR3B106(1)010(2)1000 1.0 6 1.000 0.29
10 B TR3B106(1)010(2)0800 1.0 6 0.800 0.33
10 B TR3B106(1)010(2)0750 1.0 6 0.750 0.34
15 A TR3A156(1)010(2)2000 1.5 6 2.000 0.19
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 6Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT + 85 °C; 7 VDC AT 125 °C
15 A TR3A156(1)010(2)1000 1.5 6 1.000 0.27
15 B TR3B156(1)010(2)0600 1.5 6 0.600 0.38
15 B TR3B156(1)010(2)0450 1.5 6 0.450 0.43
15 B TR3B156(1)010(2)0700 1.5 6 0.700 0.35
22 A TR3A226(1)010(2)1500 2.2 8 1.500 0.22
22 A TR3A226(1)010(2)1000 2.2 8 1.000 0.27
22 A TR3A226(1)010(2)0900 2.2 8 0.900 0.29
22 A TR3A226(1)010(2)0800 2.2 8 0.800 0.31
22 B TR3B226(1)010(2)1000 2.2 6 1.000 0.29
22 B TR3B226(1)010(2)0700 2.2 6 0.700 0.35
22 B TR3B226(1)010(2)0500 2.2 6 0.500 0.41
22 B TR3B226(1)010(2)0400 2.2 6 0.400 0.46
22 C TR3C226(1)010(2)0400 2.2 6 0.400 0.52
22 C TR3C226(1)010(2)0345 2.2 6 0.345 0.56
22 C TR3C226(1)010(2)0300 2.2 6 0.300 0.61
33 B TR3B336(1)010(2)0425 3.3 6 0.425 0.45
33 B TR3B336(1)010(2)1400 3.3 6 1.400 0.25
33 B TR3B336(1)010(2)0650 3.3 6 0.650 0.36
33 B TR3B336(1)010(2)0600 3.3 6 0.600 0.38
33 B TR3B336(1)010(2)0500 3.3 6 0.500 0.41
33 B TR3B336(1)010(2)0300 3.3 6 0.300 0.53
33 C TR3C336(1)010(2)0375 3.3 6 0.375 0.54
33 C TR3C336(1)010(2)0300 3.3 6 0.300 0.61
47 B TR3B476(1)010(2)0600 4.7 6 0.600 0.38
47 B TR3B476(1)010(2)0500 4.7 6 0.500 0.41
47 B TR3B476(1)010(2)0350 4.7 6 0.350 0.49
47 B TR3B476(1)010(2)0650 4.7 6 0.650 0.36
47 C TR3C476(1)010(2)0200 4.7 6 0.200 0.74
47 C TR3C476(1)010(2)0350 4.7 6 0.350 0.56
47 C TR3C476(1)010(2)0300 4.7 6 0.300 0.61
47 D TR3D476(1)010(2)0220 4.7 6 0.220 0.83
47 D TR3D476(1)010(2)0200 4.7 6 0.200 0.87
47 D TR3D476(1)010(2)0140 4.7 6 0.140 1.04
47 D TR3D476(1)010(2)0135 4.7 6 0.135 1.05
47 D TR3D476(1)010(2)0100 4.7 6 0.100 1.22
68 B TR3B686(1)010(2)1500 6.8 14 1.500 0.24
68 B TR3B686(1)010(2)0900 6.8 14 0.900 0.31
68 B TR3B686(1)010(2)0750 6.8 14 0.750 0.34
68 B TR3B686(1)010(2)0600 6.8 14 0.600 0.38
68 C TR3C686(1)010(2)0200 6.8 6 0.200 0.74
68 C TR3C686(1)010(2)0300 6.8 6 0.300 0.61
68 C TR3C686(1)010(2)0275 6.8 6 0.275 0.63
68 C TR3C686(1)010(2)0225 6.8 6 0.225 0.70
68 D TR3D686(1)010(2)0200 6.8 6 0.200 0.87
68 D TR3D686(1)010(2)0150 6.8 6 0.150 1.00
68 D TR3D686(1)010(2)0100 6.8 6 0.100 1.22
68 D TR3D686(1)010(3)0070 6.8 6 0.070 1.46
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 7Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT + 85 °C; 7 VDC AT 125 °C
68 E TR3E686(1)010(2)0150 6.8 4 0.150 1.05
68 V TR3V686(1)010(3)0700 6.8 6 0.700 0.42
68 V TR3V686(1)010(3)0300 6.8 6 0.300 0.65
68 V TR3V686(1)010(3)0200 6.8 6 0.200 0.79
68 V TR3V686(1)010(3)0140 6.8 6 0.140 0.94
68 V TR3V686(1)010(3)0100 6.8 6 0.100 1.12
100 B TR3B107M010(2)1400 10.0 25 1.400 0.25
100 C TR3C107(1)010(2)0200 10.0 8 0.200 0.74
100 C TR3C107(1)010(2)0150 10.0 8 0.150 0.86
100 C TR3C107(1)010(2)0100 10.0 8 0.100 1.05
100 D TR3D107(1)010(2)0150 10.0 6 0.150 1.00
100 D TR3D107(1)010(2)0100 10.0 6 0.100 1.22
100 D TR3D107(1)010(2)0080 10.0 6 0.080 1.37
100 D TR3D107(1)010(3)0070 10.0 6 0.070 1.52
100 D TR3D107(1)010(3)0065 10.0 6 0.065 1.46
100 D TR3D107(1)010(3)0050 10.0 6 0.050 1.73
100 E TR3E107(1)010(2)0125 10.0 6 0.125 1.15
100 E TR3E107(1)010(2)0150 10.0 6 0.150 1.05
100 E TR3E107(1)010(2)0100 10.0 6 0.100 1.28
100 V TR3V107(1)010(3)0400 10.0 8 0.400 0.56
100 V TR3V107(1)010(3)0200 10.0 8 0.200 0.79
100 V TR3V107(1)010(3)0150 10.0 8 0.150 0.91
150 C TR3C157M010(2)0500 15.0 20 0.500 0.47
150 D TR3D157(1)010(2)0150 15.0 8 0.150 1.00
150 D TR3D157(1)010(2)0100 15.0 8 0.100 1.22
150 D TR3D157(1)010(2)0075 15.0 8 0.075 1.41
150 D TR3D157(1)010(3)0070 15.0 8 0.070 1.46
150 D TR3D157(1)010(3)0050 15.0 8 0.050 1.73
150 E TR3E157(1)010(2)0100 15.0 8 0.100 1.28
150 E TR3E157(1)010(2)0080 15.0 8 0.080 1.44
220 D TR3D227(1)010(2)0150 22.0 8 0.150 1.00
220 D TR3D227(1)010(2)0125 22.0 8 0.125 1.10
220 D TR3D227(1)010(2)0100 22.0 8 0.100 1.22
220 D TR3D227(1)010(3)0050 22.0 8 0.050 1.73
220 E TR3E227(1)010(2)0150 22.0 8 0.150 1.05
220 E TR3E227(1)010(2)0100 22.0 8 0.100 1.28
220 E TR3E227(1)010(3)0070 22.0 8 0.070 1.54
220 E TR3E227(1)010(3)0060 22.0 8 0.060 1.66
220 E TR3E227(1)010(3)0050 22.0 8 0.050 1.82
220 V TR3V227(1)010(3)0200 30.0 12 0.200 0.79
220 V TR3V227(1)010(3)0150 30.0 12 0.150 0.91
330 D TR3D337(1)010(2)0150 33.0 15 0.150 1.00
330 D TR3D337(1)010(2)0125 33.0 15 0.125 1.10
330 D TR3D337(1)010(2)0100 33.0 15 0.100 1.22
330 E TR3E337(1)010(2)0100 33.0 10 0.100 1.28
330 E TR3E337(1)010(3)0060 33.0 10 0.060 1.66
330 W TR3W337(1)010(3)0100 33.0 10 0.100 1.58
330 W TR3W337(1)010(3)0060 33.0 10 0.060 2.04
470 E TR3E477(1)010(2)0200 47.0 15 0.200 0.91
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 8Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT + 85 °C; 7 VDC AT 125 °C
470 E TR3E477(1)010(2)0150 47.0 15 0.150 1.05
470 E TR3E477(1)010(2)0100 47.0 15 0.100 1.28
470 E TR3E477(1)010(3)0075 47.0 15 0.075 1.48
470 E TR3E477(1)010(2)0060 47.0 15 0.060 1.66
470 E TR3E477(1)010(2)0050 47.0 15 0.050 1.82
470 W TR3W477M010(3)0100 47.0 20 0.100 1.58
470 W TR3W477M010(3)0060 47.0 20 0.060 2.04
470 W TR3W477M010(3)0050 47.0 20 0.050 2.24
16 VDC AT + 85 °C; 10 VDC AT + 125 °C
2.2 A TR3A225(1)016(2)4000 0.5 6 4.000 0.14
2.2 A TR3A225(1)016(2)3500 0.5 6 3.500 0.15
2.2 A TR3A225(1)016(2)1800 0.5 6 1.800 0.20
3.3 A TR3A335(1)016(2)4000 0.5 6 4.000 0.14
3.3 A TR3A335(1)016(2)3500 0.5 6 3.500 0.15
4.7 A TR3A475(1)016(2)3000 0.8 6 3.000 0.16
4.7 A TR3A475(1)016(2)2500 0.8 6 2.500 0.17
4.7 A TR3A475(1)016(2)2000 0.8 6 2.000 0.19
4.7 A TR3A475(1)016(2)1500 0.8 6 1.500 0.22
4.7 B TR3B475(1)016(2)1500 0.8 6 1.500 0.24
4.7 B TR3B475(1)016(2)0800 0.8 6 0.800 0.33
6.8 A TR3A685(1)016(2)3000 1.1 6 3.000 0.16
6.8 A TR3A685(1)016(2)1500 1.1 6 1.500 0.22
6.8 B TR3B685(1)016(2)1200 1.1 6 1.200 0.27
6.8 B TR3B685(1)016(2)0600 1.1 6 0.600 0.38
10 A TR3A106(1)016(2)1700 1.6 6 1.700 0.21
10 B TR3B106(1)016(2)0800 1.6 6 0.800 0.33
10 B TR3B106(1)016(2)0500 1.6 6 0.500 0.41
10 C TR3C106(1)016(2)0600 1.6 6 0.600 0.43
10 C TR3C106(1)016(2)0500 1.6 6 0.500 0.47
10 C TR3C106(1)016(2)0450 1.6 6 0.450 0.49
15 B TR3B156(1)016(2)0800 2.4 6 0.800 0.33
15 B TR3B156(1)016(2)0500 2.4 6 0.500 0.41
15 C TR3C156(1)016(2)0400 2.4 6 0.400 0.52
22 B TR3B226(1)016(2)1000 3.5 6 1.000 0.29
22 B TR3B226(1)016(2)0700 3.5 6 0.700 0.35
22 B TR3B226(1)016(2)0600 3.5 6 0.600 0.38
22 B TR3B226(1)016(2)0400 3.5 6 0.400 0.46
22 C TR3C226(1)016(2)0375 3.5 6 0.375 0.54
22 C TR3C226(1)016(2)0350 3.5 6 0.350 0.56
22 D TR3D226(1)016(2)0250 3.5 6 0.250 0.77
33 B TR3B336(1)016(2)0700 5.3 6 0.700 0.35
33 B TR3B336(1)016(2)0500 5.3 6 0.500 0.41
33 B TR3B336(1)016(2)0350 5.3 6 0.350 0.49
33 C TR3C336(1)016(2)0300 5.3 6 0.300 0.61
33 C TR3C336(1)016(2)0225 5.3 6 0.225 0.70
33 D TR3D336(1)016(2)0250 5.3 6 0.250 0.77
33 D TR3D336(1)016(2)0225 5.3 4 0.225 0.82
33 D TR3D336(1)016(2)0150 5.3 6 0.150 1.00
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 9Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
16 VDC AT + 85 °C; 10 VDC AT + 125 °C
47 C TR3C476(1)016(2)0500 7.5 6 0.500 0.47
47 C TR3C476(1)016(2)0350 7.5 6 0.350 0.56
47 C TR3C476(1)016(2)0300 7.5 6 0.300 0.61
47 D TR3D476(1)016(2)0200 7.5 6 0.200 0.87
47 D TR3D476(1)016(2)0150 7.5 6 0.150 1.00
47 D TR3D476(1)016(2)0100 7.5 6 0.100 1.22
68 D TR3D686(1)016(2)0150 10.9 6 0.150 1.00
68 D TR3D686(1)016(2)0100 10.9 6 0.100 1.22
68 D TR3D686(1)016(3)0070 10.9 6 0.070 1.46
100 D TR3D107(1)016(2)0150 16.0 8 0.150 1.00
100 D TR3D107(1)016(2)0125 16.0 8 0.125 1.10
100 D TR3D107(1)016(2)0100 16.0 8 0.100 1.22
100 D TR3D107(1)016(3)0075 16.0 8 0.075 1.41
100 E TR3E107(1)016(2)0150 16.0 8 0.150 1.05
100 E TR3E107(1)016(2)0125 16.0 8 0.125 1.15
100 E TR3E107(1)016(2)0100 16.0 8 0.100 1.28
150 D TR3D157(1)016(2)0400 24.0 8 0.400 0.61
150 D TR3D157(1)016(2)0150 24.0 8 0.150 1.00
150 D TR3D157(1)016(2)0125 24.0 8 0.125 1.10
150 D TR3D157(1)016(2)0100 24.0 8 0.100 1.22
150 D TR3D157(1)016(2)0085 24.0 8 0.085 1.33
150 D TR3D157(1)016(3)0075 24.0 8 0.075 1.41
150 D TR3D157(1)016(3)0060 24.0 8 0.060 1.58
150 E TR3E157(1)016(2)0400 24.0 8 0.400 0.64
150 E TR3E157(1)016(2)0150 24.0 8 0.150 1.05
150 E TR3E157(1)016(2)0100 24.0 8 0.100 1.28
150 E TR3E157(1)016(2)0075 24.0 8 0.075 1.48
150 E TR3E157(1)016(2)0060 24.0 8 0.060 1.66
220 E TR3E227(1)016(2)0150 35.2 14 0.150 1.05
220 E TR3E227(1)016(2)0125 35.2 14 0.125 1.15
220 E TR3E227(1)016(2)0100 35.2 14 0.100 1.28
20 VDC AT + 85 °C; 13 VDC AT + 125 °C
1.0 A TR3A105(1)020(2)5500 0.5 4 5.500 0.12
1.0 A TR3A105(1)020(2)3000 0.5 4 3.000 0.16
2.2 A TR3A225(1)020(2)4000 0.5 6 4.000 0.14
2.2 A TR3A225(1)020(2)3000 0.5 6 3.000 0.16
3.3 A TR3A335(1)020(2)4000 0.7 6 4.000 0.14
3.3 B TR3B335(1)020(2)1300 0.7 6 1.300 0.26
4.7 A TR3A475(1)020(2)3500 0.9 6 3.500 0.15
4.7 A TR3A475(1)020(2)1800 0.9 6 1.800 0.20
4.7 B TR3B475(1)020(2)1000 0.9 6 1.000 0.29
4.7 B TR3B475(1)020(2)0750 0.9 6 0.750 0.34
6.8 A TR3A685(1)020(2)3200 1.4 6 3.200 0.15
6.8 A TR3A685(1)020(2)3000 1.4 6 3.000 0.16
6.8 A TR3A685(1)020(2)2600 1.4 6 2.600 0.17
6.8 B TR3B685(1)020(2)1000 1.4 6 1.000 0.29
6.8 B TR3B685(1)020(2)0600 1.4 6 0.600 0.38
10 B TR3B106(1)020(2)1000 2.0 6 1.000 0.29
10 B TR3B106(1)020(2)0500 2.0 6 0.500 0.41
10 C TR3C106(1)020(2)0700 2.0 6 0.700 0.40
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 10 Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
20 VDC AT + 85 °C; 13 VDC AT + 125 °C
10 C TR3C106(1)020(2)0500 2.0 6 0.500 0.47
10 C TR3C106(1)020(2)0475 2.0 6 0.475 0.48
10 C TR3C106(1)020(2)0450 2.0 6 0.450 0.49
10 C TR3C106(1)020(2)0400 2.0 6 0.400 0.52
15 B TR3B156(1)020(2)1000 3.0 6 1.000 0.29
15 B TR3B156(1)020(2)0500 3.0 6 0.500 0.41
15 C TR3C156(1)020(2)0400 3.0 6 0.400 0.52
22 B TR3B226(1)020(2)0800 4.4 6 0.800 0.33
22 B TR3B226(1)020(2)0600 4.4 6 0.600 0.38
22 B TR3B226(1)020(2)0400 4.4 6 0.400 0.46
22 C TR3C226(1)020(2)0400 4.4 6 0.400 0.52
22 C TR3C226(1)020(2)0375 4.4 6 0.375 0.54
22 D TR3D226(1)020(2)0300 4.4 6 0.300 0.71
22 D TR3D226(1)020(2)0225 3.5 4 0.225 0.82
22 D TR3D226(1)020(2)0200 4.4 6 0.200 0.87
33 C TR3C336(1)020(2)0350 6.6 6 0.350 0.56
33 C TR3C336(1)020(2)0300 6.6 6 0.300 0.61
33 C TR3C336(1)020(2)0200 6.6 6 0.200 0.74
33 D TR3C336(1)020(2)0400 6.6 6 0.400 0.61
33 D TR3D336(1)020(2)0250 6.6 6 0.250 0.77
33 D TR3D336(1)020(2)0200 6.6 6 0.200 0.87
47 D TR3D476(1)020(2)0200 9.4 6 0.200 0.87
47 D TR3D476(1)020(2)0175 9.4 6 0.175 0.93
47 D TR3D476(1)020(2)0150 9.4 6 0.150 1.00
47 D TR3D476(1)020(3)0100 9.4 6 0.100 1.22
47 E TR3E476(1)020(2)0150 9.4 6 0.150 1.05
47 E TR3E476(1)020(3)0125 9.4 6 0.125 1.15
68 D TR3D686(1)020(2)0200 13.6 6 0.200 0.87
68 D TR3D686(1)020(2)0175 13.6 6 0.175 0.93
68 D TR3D686(1)020(2)0150 13.6 6 0.150 1.00
68 D TR3D686(1)020(2)0115 13.6 6 0.115 1.14
68 E TR3E686(1)020(2)0200 13.6 6 0.200 0.91
68 E TR3E686(1)020(2)0150 13.6 6 0.150 1.05
68 E TR3E686(1)020(2)0125 13.6 6 0.125 1.15
68 E TR3E686(1)020(2)0120 13.6 6 0.120 1.17
100 D TR3D107(1)020(2)0200 20.0 8 0.200 0.87
100 D TR3D107(1)020(2)0150 20.0 8 0.150 1.00
100 D TR3D107(1)020(2)0100 20.0 8 0.100 1.22
100 D TR3D107(1)020(3)0085 20.0 8 0.085 1.33
100 D TR3D107(1)020(3)0080 20.0 8 0.080 1.37
100 E TR3E107(1)020(2)0200 20.0 8 0.200 0.91
100 E TR3E107(1)020(2)0150 20.0 8 0.150 1.05
100 E TR3E107(1)020(2)0100 20.0 8 0.100 1.28
100 W TR3W107(1)020(3)0200 20.0 8 0.200 1.12
100 W TR3W107(1)020(3)0100 20.0 8 0.100 1.58
100 W TR3W107(1)020(3)0080 20.0 8 0.080 1.77
100 W TR3W107(1)020(3)0060 20.0 8 0.060 2.04
150 W TR3W157(1)020(3)0200 30.0 10 0.200 1.12
150 W TR3W157(1)020(3)0150 30.0 10 0.150 1.29
150 W TR3W157(1)020(3)0100 30.0 10 0.100 1.58
150 W TR3W157(1)020(3)0080 30.0 10 0.080 1.77
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 11 Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
25 VDC AT + 85 °C; 17 VDC AT + 125 °C
1.0 A TR3A105(1)025(2)4000 0.5 4 4.000 0.14
1.5 A TR3A155(1)025(2)4000 0.5 6 4.000 0.14
1.5 A TR3A155(1)025(2)3000 0.5 6 3.000 0.16
2.2 A TR3A225(1)025(2)4000 0.6 6 4.000 0.14
2.2 B TR3B225(1)025(2)1500 0.6 6 1.500 0.24
2.2 B TR3B225(1)025(2)1200 0.6 6 1.200 0.27
2.2 B TR3B225(1)025(2)0900 0.6 6 0.900 0.31
3.3 A TR3A335(1)025(2)3500 0.8 6 3.500 0.15
3.3 A TR3A335(1)025(2)3000 0.8 6 3.000 0.16
3.3 B TR3B335(1)025(2)2000 0.8 6 2.000 0.21
3.3 B TR3B335(1)025(2)1500 0.8 6 1.500 0.24
3.3 B TR3B335(1)025(2)0750 0.8 6 0.750 0.34
4.7 A TR3A475(1)025(2)3500 1.2 6 3.500 0.15
4.7 A TR3A475(1)025(2)3000 1.2 6 3.000 0.16
4.7 B TR3B475(1)025(2)1500 1.2 6 1.500 0.24
4.7 B TR3B475(1)025(2)1000 1.2 6 1.000 0.29
4.7 B TR3B475(1)025(2)0900 1.2 6 9.000 0.10
4.7 B TR3B475(1)025(2)0700 1.2 6 0.700 0.35
4.7 C TR3C475(1)025(2)0600 1.2 6 0.600 0.43
4.7 C TR3C475(1)025(2)0525 1.2 6 0.525 0.46
6.8 B TR3B685(1)025(2)2000 1.7 6 2.000 0.21
6.8 B TR3B685(1)025(2)1500 1.7 6 1.500 0.24
6.8 B TR3B685(1)025(2)1200 1.7 6 1.200 0.27
6.8 B TR3B685(1)025(2)0700 1.7 6 0.700 0.35
6.8 B TR3B685(1)025(3)0500 1.7 6 0.500 0.41
6.8 B TR3B685(1)025(3)0400 1.7 6 0.400 0.46
6.8 C TR3C685(1)025(2)0600 1.7 6 0.600 0.43
6.8 C TR3C685(1)025(2)0500 1.7 6 0.500 0.47
10 B TR3B106(1)025(2)1300 2.5 6 1.300 0.26
10 B TR3B106(1)025(2)1100 2.5 6 1.100 0.28
10 B TR3B106(1)025(2)0450 2.5 6 0.450 0.43
10 C TR3C106(1)025(2)0600 2.5 6 0.600 0.43
10 C TR3C106(1)025(2)0500 2.5 6 0.500 0.47
10 C TR3C106(1)025(2)0450 2.5 6 0.450 0.49
10 C TR3C106(1)025(2)0300 2.5 6 0.300 0.61
10 D TR3D106(1)025(2)0400 2.5 6 0.400 0.61
10 D TR3D106(1)025(2)0300 2.5 6 0.300 0.71
15 B TR3B156(1)025(2)1000 3.8 6 1.000 0.29
15 B TR3B156(1)025(2)0800 3.8 6 0.800 0.33
15 B TR3B156(1)025(2)0600 3.8 6 0.600 0.38
15 C TR3C156(1)025(2)0900 3.8 6 0.900 0.35
15 C TR3C156(1)025(2)0425 3.8 6 0.425 0.51
15 D TR3D156(1)025(2)0350 3.8 6 0.350 0.65
15 D TR3D156(1)025(2)0275 3.8 6 0.275 0.74
15 D TR3D156(1)025(2)0250 3.8 6 0.250 0.77
15 D TR3D156(1)025(2)0200 3.8 6 0.200 0.87
22 C TR3C226(1)025(2)1000 5.5 6 1.000 0.33
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 12 Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
25 VDC AT + 85 °C; 17 VDC AT + 125 °C
22 C TR3C226(1)025(2)0900 5.5 6 0.900 0.35
22 C TR3C226(1)025(2)0400 5.5 6 0.400 0.52
22 C TR3C226(1)025(2)0425 5.5 6 0.425 0.51
22 C TR3C226(1)025(2)0300 5.5 6 0.300 0.61
22 C TR3C226(1)025(2)0275 5.5 6 0.275 0.63
22 C TR3C226(1)025(2)0250 5.5 6 0.250 0.66
22 D TR3D226(1)025(2)0300 5.5 6 0.300 0.71
22 D TR3D226(1)025(2)0200 5.5 6 0.200 0.87
22 E TR3E226(1)025(2)0300 5.5 6 0.300 0.74
22 E TR3E226(1)025(2)0200 5.5 6 0.200 0.91
22 V TR3V226(1)025(3)0500 5.5 6 0.500 0.50
22 V TR3V226(1)025(3)0400 5.5 6 0.400 0.56
22 V TR3V226(1)025(3)0250 5.5 6 0.250 0.71
33 D TR3D336(1)025(2)0400 8.3 6 0.400 0.61
33 D TR3D336(1)025(2)0300 8.3 6 0.300 0.71
33 D TR3D336(1)025(2)0225 8.3 6 0.225 0.82
33 D TR3D336(1)025(2)0200 8.3 6 0.200 0.87
33 E TR3E336(1)025(2)0300 8.3 6 0.300 0.74
33 E TR3E336(1)025(2)0200 8.3 6 0.200 0.91
33 E TR3E336(1)025(2)0175 6.6 4 0.175 0.97
47 D TR3D476(1)025(2)0350 11.8 8 0.350 0.65
47 D TR3D476(1)025(2)0250 11.8 8 0.250 0.77
47 D TR3D476(1)025(2)0200 11.8 8 0.200 0.87
47 D TR3D476(1)025(2)0150 11.8 8 0.150 1.00
47 D TR3D476(1)025(3)0125 11.8 8 0.125 1.10
47 D TR3D476(1)025(3)0100 11.8 8 0.100 1.22
47 E TR3E476(1)025(2)0300 11.8 6 0.300 0.74
47 E TR3E476(1)025(2)0200 11.8 6 0.200 0.91
47 E TR3E476(1)025(2)0150 11.8 8 0.150 1.05
47 E TR3E476(1)025(3)0125 11.8 8 0.125 1.15
47 E TR3E476(1)025(3)0100 11.8 8 0.100 1.28
68 E TR3E686(1)025(2)0250 17.0 8 0.250 0.81
68 W TR3W686(1)025(3)0200 17.0 6 0.200 1.12
68 W TR3W686(1)025(3)0150 17.0 6 0.150 1.29
68 W TR3W686(1)025(3)0095 17.0 6 0.095 1.62
100 W TR3W107(1)025(3)0200 25.0 15 0.200 1.12
100 W TR3W107(1)025(3)0150 25.0 15 0.150 1.29
100 W TR3W107(1)025(3)0100 25.0 15 0.100 1.58
35 VDC AT + 85 °C; 23 VDC AT + 125 °C
0.47 A TR3A474(1)035(2)4000 0.5 4 4.000 0.14
0.68 A TR3A684(1)035(2)6000 0.5 4 6.000 0.11
0.68 A TR3A684(1)035(2)4000 0.5 4 4.000 0.14
1.0 A TR3A105(1)035(2)6000 0.5 4 6.000 0.11
1.0 A TR3A105(1)035(2)4000 0.5 4 4.000 0.14
1.0 A TR3A105(1)035(2)3000 0.5 4 3.000 0.16
1.0 B TR3B105(1)035(2)2000 0.5 4 2.000 0.21
1.0 B TR3B105(1)035(2)1700 0.5 4 1.700 0.22
1.0 B TR3B105(1)035(2)1500 0.5 4 1.500 0.24
1.5 B TR3B155(1)035(2)3000 0.5 6 3.000 0.17
1.5 B TR3B155(1)035(2)2000 0.5 6 2.000 0.21
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 13 Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
35 VDC AT + 85 °C; 23 VDC AT + 125 °C
1.5 C TR3C155(1)035(2)2500 0.5 6 2.500 0.21
1.5 C TR3C155(1)035(2)0900 0.5 6 0.900 0.35
2.2 B TR3B225(1)035(2)2500 0.8 6 2.500 0.18
2.2 B TR3B225(1)035(2)2000 0.8 6 2.000 0.21
2.2 B TR3B225(1)035(2)1500 0.8 6 1.500 0.24
2.2 C TR3C225(1)035(2)1500 0.8 6 1.500 0.27
2.2 C TR3C225(1)035(2)0900 0.8 6 0.900 0.35
3.3 B TR3B335(1)035(2)1500 1.2 6 1.500 0.24
3.3 B TR3B335(1)035(2)1000 1.2 6 1.000 0.29
3.3 C TR3C335(1)035(2)0800 1.2 6 0.800 0.37
3.3 C TR3C335(1)035(2)0700 1.2 6 0.700 0.40
3.3 C TR3C335(1)035(2)0600 1.2 6 0.600 0.43
4.7 B TR3B475(1)035(2)1500 1.6 6 1.500 0.24
4.7 B TR3B475(1)035(2)1000 1.6 6 1.000 0.29
4.7 B TR3B475(1)035(2)0700 1.6 6 0.700 0.35
4.7 C TR3C475(1)035(2)0700 1.6 6 0.700 0.40
4.7 C TR3C475(1)035(2)0600 1.6 6 0.600 0.43
4.7 C TR3C475(1)035(2)0500 1.6 6 0.500 0.47
4.7 D TR3D475(1)035(2)0700 1.6 6 0.700 0.46
6.8 C TR3C685(1)035(2)0900 2.4 6 0.900 0.35
6.8 C TR3C685(1)035(2)0475 2.4 6 0.475 0.48
6.8 D TR3D685(1)035(2)0500 2.4 6 0.500 0.55
6.8 D TR3D685(1)035(2)0400 2.4 6 0.400 0.61
6.8 D TR3D685(1)035(2)0300 2.4 6 0.300 0.71
6.8 E TR3E685(1)035(2)0300 2.4 4 0.300 0.74
10 C TR3C106(1)035(2)1200 3.5 6 1.200 0.30
10 C TR3C106(1)035(2)0450 3.5 6 0.450 0.49
10 D TR3D106(1)035(2)0400 3.5 6 0.400 0.61
10 D TR3D106(1)035(2)0300 3.5 6 0.300 0.71
10 D TR3D106(1)035(2)0260 3.5 6 0.260 0.76
10 D TR3D106(1)035(2)0250 3.5 6 0.250 0.77
10 D TR3D106(1)035(2)0200 3.5 6 0.200 0.87
10 D TR3D106(1)035(3)0135 3.5 6 0.135 1.05
10 D TR3D106(1)035(3)0125 3.5 6 0.125 1.10
10 E TR3E106(1)035(2)0250 3.5 6 0.250 0.81
10 E TR3E106(1)035(2)0200 3.5 6 0.200 0.91
15 D TR3D156(1)035(2)0350 5.3 6 0.350 0.65
15 D TR3D156(1)035(2)0300 5.3 6 0.300 0.71
15 D TR3D156(1)035(2)0260 5.3 6 0.260 0.76
15 D TR3D156(1)035(2)0225 5.3 6 0.225 0.82
15 D TR3D156(1)035(2)0200 5.3 6 0.200 0.87
15 D TR3D156(1)035(2)0150 5.3 6 0.150 1.00
15 E TR3E156(1)035(2)0300 5.3 6 0.300 0.74
15 E TR3E156(1)035(2)0225 5.3 6 0.225 0.86
15 E TR3E156(1)035(2)0200 5.3 6 0.200 0.91
15 E TR3E156(1)035(2)0150 5.3 6 0.150 1.05
22 D TR3D226(1)035(2)0400 7.7 6 0.400 0.61
22 D TR3D226(1)035(2)0300 7.7 6 0.300 0.71
22 D TR3D226(1)035(2)0275 7.7 6 0.275 0.74
22 D TR3D226(1)035(2)0250 7.7 6 0.250 0.77
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 14 Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
35 VDC AT + 85 °C; 23 VDC AT + 125 °C
22 D TR3D226(1)035(2)0200 7.7 6 0.200 0.87
22 E TR3E226(1)035(2)0300 7.7 6 0.300 0.74
22 E TR3E226(1)035(2)0275 7.7 6 0.275 0.77
22 E TR3E226(1)035(2)0260 7.7 6 0.260 0.80
22 E TR3E226(1)035(2)0200 7.7 6 0.200 0.91
50 VDC AT + 85 °C; 33 VDC AT + 125 °C
1.0 B TR3B105(1)050(2)4000 0.5 4 4.000 0.15
1.0 B TR3B105(1)050(2)2000 0.5 4 2.000 0.21
1.0 C TR3C105(1)050(2)1600 0.5 4 1.600 0.26
1.5 B TR3B155(1)050(2)2000 0.8 6 2.000 0.21
1.5 C TR3C155(1)050(2)1500 0.8 6 1.500 0.27
2.2 B TR3B225(1)050(2)2000 1.1 6 2.000 0.21
2.2 C TR3C225(1)050(2)1500 1.1 6 1.500 0.27
2.2 D TR3D225(1)050(2)0800 1.1 6 0.800 0.43
3.3 C TR3C335(1)050(2)1500 1.7 6 1.500 0.27
3.3 D TR3D335(1)050(2)0800 1.7 6 0.800 0.43
4.7 C TR3C475(1)050(2)1000 2.4 6 1.000 0.33
4.7 C TR3C475(1)050(2)0700 2.4 6 0.700 0.40
4.7 C TR3C475(1)050(2)0500 2.4 6 0.500 0.47
4.7 D TR3D475(1)050(2)0700 2.4 6 0.700 0.46
4.7 D TR3D475(1)050(2)0600 2.4 6 0.600 0.50
4.7 D TR3D475(1)050(2)0500 2.4 6 0.500 0.55
4.7 D TR3D475(1)050(2)0300 2.4 6 0.300 0.71
4.7 E TR3E475(1)050(2)0600 2.4 4 0.600 0.52
4.7 E TR3E475(1)050(2)0300 2.4 4 0.300 0.74
6.8 D TR3D685(1)050(2)0700 3.4 6 0.700 0.46
6.8 D TR3D685(1)050(2)0600 3.4 6 0.600 0.50
6.8 D TR3D685(1)050(2)0500 3.4 6 0.500 0.55
6.8 D TR3D685(1)050(2)0300 3.4 6 0.300 0.71
6.8 E TR3E685(1)050(2)0550 3.4 6 0.550 0.55
6.8 E TR3E685(1)050(2)0500 3.4 6 0.500 0.57
10 D TR3D106(1)050(2)0700 5.0 6 0.700 0.46
10 D TR3D106(1)050(2)0550 5.0 6 0.550 0.52
10 D TR3D106(1)050(2)0450 5.0 6 0.450 0.58
10 E TR3E106(1)050(2)0700 5.0 6 0.700 0.49
10 E TR3E106(1)050(2)0550 5.0 6 0.550 0.55
10 E TR3E106(1)050(2)0500 5.0 6 0.500 0.57
10 E TR3E106(1)050(2)0400 5.0 6 0.400 0.64
10 E TR3E106(1)050(2)0300 5.0 6 0.300 0.74
15 E TR3E156(1)050(2)0400 7.5 6 0.400 0.64
15 E TR3E156(1)050(3)0300 7.5 6 0.300 0.74
63 VDC AT + 85 °C; 40 VDC AT + 125 °C
4.7 D TR3D475(1)063(2)0700 3.0 6 0.700 0.46
10 E TR3E106(1)063(2)0600 6.3 6 0.600 0.52
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Notes
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 15 Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 °C)
STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS
Capacitor Voltage Rating Operating Voltage
4.0 2.5
6.3 3.6
10 6.0
16 10
20 12
25 15
35 24
50 28
63 38
SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS
Capacitor Voltage Rating Operating Voltage
4.0 2.5
6.3 3.3
10 5.0
16 8.0
20 10
25 12
35 15
50 24
63 32
TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY
0.1 1.0 10.0 100.0 1000.0
ESR/Z, Ω
“D” Case
IMPEDANCE
ESR
68 µF, 20 VDC
470 µF, 4 VDC
1.00
0.10
0.01
FREQUENCY kHz
0.1 1.0 10.0 100.0 1000.0
ESR/Z, Ω
1.00
0.10
0.01
FREQUENCY kHz
“D” Case
IMPEDANCE
ESR
220 µF, 10 VDC
330 µF, 6.3 VDC
TR3
www.vishay.com Vishay Sprague
Revision: 11-Apr-12 16 Document Number: 40080
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
POWER DISSIPATION
CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR
A 0.075
B 0.085
C 0.110
D 0.150
E 0.165
V 0.125
W 0.250
STANDARD PACKAGING QUANTITY
CASE CODE UNITS PER REEL
7" REEL 13" REEL
A 2000 9000
B 2000 8000
C 500 3000
D 500 2500
E 400 1500
V 1000 5000
W 500 2000
PRODUCT INFORMATION
Guide for Molded Tantalum Capacitors
www.vishay.com/doc?40074
Pad Dimensions
Packaging Dimensions
Moisture Sensitivity www.vishay.com/doc?40135
SELECTOR GUIDES
Solid Tantalum Selector Guide www.vishay.com/doc?49053
Solid Tantalum Chip Capacitors www.vishay.com/doc?40091
FAQ
Frequently Asked Questions www.vishay.com/doc?40110
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
